ExtendSetCCUses updates SETCC nodes which use a load (OriginalLoad) to
reflect a simplification to the load (ExtLoad).
Based on my reading, ExtendSetCCUses may create new nodes to extend a
constant attached to a SETCC. It also creates fresh SETCC nodes which
refer to any updated operands.
ISTM that the location applied to the new constant and SETCC nodes
should be the same as the location of the ExtLoad.
This was suggested by Adrian in https://reviews.llvm.org/D45995.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46216
llvm-svn: 332119
This teaches tryToFoldExtOfLoad to set the right location on a
newly-created extload. With that in place, the logic for performing a
certain ([s|z]ext (load ...)) combine becomes identical for sexts and
zexts, and we can get rid of one copy of the logic.
The test case churn is due to dependencies on IROrders inherited from
the wrong SDLoc.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46158
llvm-svn: 332118
Clang's codegen now uses 128-bit masked load/store intrinsics in IR. The backend will widen to 512-bits on AVX512F targets.
So this patch adds patterns to detect codegen's widening and patterns for AVX512VL that don't get widened.
We may be able to drop some of the old patterns, but I leave that for a future patch.
llvm-svn: 332049
With nnan, there's no need for the masked merge / blend
sequence (that probably costs much more than the min/max
instruction).
Somewhere between clang 5.0 and 6.0, we started producing
these intrinsics for fmax()/fmin() in C source instead of
libcalls or fcmp/select. The backend wasn't prepared for
that, so we regressed perf in those cases.
Note: it's possible that other targets have similar problems
as seen here.
Noticed while investigating PR37403 and related bugs:
https://bugs.llvm.org/show_bug.cgi?id=37403
The IR FMF propagation cases still don't work. There's
a proposal that might fix those cases in D46563.
llvm-svn: 331992
Clang 6.0 was updated to create these intrinsics rather than
libcalls or fcmp/select, but the backend wasn't prepared to
handle that optimally.
This bug is not the primary reason for PR37403:
https://bugs.llvm.org/show_bug.cgi?id=37403
...but it's probably more important for x86 perf.
llvm-svn: 331988
Summary:
The combine in rebuildSetCC may be combined to another
node leaving our references stale. Keep a handle on
it to avoid stale references.
Fixes PR36602.
Reviewers: dbabokin, RKSimon, eli.friedman, davide
Subscribers: hiraditya, uabelho, JesperAntonsson, qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D46404
llvm-svn: 331985
The second source operand of G_SHL, G_ASHR, and G_LSHR must preserve its
value as a (small) unsigned integer, therefore its incorrect to widen it
in any way but by zero extending it.
G_SHL was using G_ANYEXT and G_ASHR - G_SEXT (which is correct for their
destination and first source operands, but not the "number of bits to
shift" operand).
Generally, shifts aren't as similar to regular binary operations as it
might seem, for instance, they aren't commutative nor associative and
the second source operand usually requires a special treatment.
Reviewers: bogner, javed.absar, aivchenk, rovka
Reviewed By: bogner
Subscribers: igorb, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46413
llvm-svn: 331926
Previously if !LegalOperations we would blindly call getBitcast and hope that getNode would constant fold it. But if the conversion is between a vector and a scalar, getNode has no simplification.
This means we would just get back the original N. We would then return that N which would make the caller of visitBITCAST think that we used CombineTo and did our own worklist management. This prevents target specific optimizations from being called for vector/scalar bitcasts until after legal operations.
llvm-svn: 331896
MOVNTPD/MOVNTPS should be WriteFStore
Standardized BDW/HSW/SKL/SKX WriteFStore/WriteVecStore - fixes some missed instregex patterns. (V)MASKMOVDQU was already using the default, its costs gets increased but is still nowhere near the real cost of that nasty instruction....
llvm-svn: 331864
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Summary:
Changing the lengths of the atomic memory intrinsics in a test to make sure
that they don't get lowered into loads/stores if/when expansion of these
occurs in selectiondag.
llvm-svn: 331800
CodeGenPrepare pass move extension instructions close to load instructions in different BB, so they can be combined later. But the extension instructions can't move through logical and shift instructions in current implementation. This patch enables this enhancement, so we can eliminate more extension instructions.
Differential Revision: https://reviews.llvm.org/D45537
llvm-svn: 331783
This fixes a couple of BtVer2 missing instructions that weren't been handled in the override.
NOTE: There are still a lot of overrides that still need cleaning up!
llvm-svn: 331770
I've created the necessary classes but there are still a lot of overrides that need cleaning up.
NOTE: The Znver1 model was missing some div/idiv variants in the instregex patterns and wasn't setting the resource cycles at all in the overrides.
llvm-svn: 331767
This is a fix for PR30290: by marking all byval stack slots as being aliased,
the instruction scheduler is more conservative about rescheduling memory
accesses to such stack slots as an LLVM Value* might alias it. This fixes
errors such as in the patched test case, where reads and writes to a data
structure are illegally mixed.
This could be fixed better in the future with better analysis for the
instruction scheduler to know what Values alias what stack slots.
Differential Revision: https://reviews.llvm.org/D45022
llvm-svn: 331749
This patch adds a shadow stack fix when compiling
setjmp/longjmp with the shadow stack enabled. This
allows setjmp/longjmp to work correctly with CET.
Patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D46181
llvm-svn: 331748
Making sure we don't truncate / extend pointers, don't try to change
vector topology or bitcast vectors to scalars or back, and most
importantly, don't extend to a smaller type or truncate to a large
one.
Reviewers: qcolombet t.p.northover aditya_nandakumar
Reviewed By: qcolombet
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46490
llvm-svn: 331718
Every generic machine instruction must have generic virtual registers
only, that is, have a low-level type attached to each operand.
Previously MachineVerifier would catch a type missing on an operand
only if the previous operand for the the same type index exists and
have a type attached to it and it will report it as a type mismatch.
This is incosistent behaviour and a misleading error message.
This commit makes sure MachineVerifier explicitly checks that the
types are there for every operand and if not provides a
straightforward error message.
Reviewers: qcolombet t.p.northover bogner ab
Reviewed By: qcolombet
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46455
llvm-svn: 331694
This is an NFC pre-commit for the following "Checking that generic
instrs have LLTs on all vregs" commit.
This overloads MachineOperand::print to make it possible to print LLTs
with standalone machine operands.
This also overloads MachineVerifier::print(...MachineOperand...) with
an optional LLT using the newly introduced MachineOperand::print
variant; no actual calls added.
This also refactors MachineVerifier::visitMachineInstrBefore in the
parts dealing with all generic instructions (checking Selected
property, LLTs, and phys regs).
llvm-svn: 331693
Summary:
Split off from D46031.
The previous patch, D46493, completely disabled unfolding in case of immediates.
But we can do better:
{F6120274} {F6120277}
https://rise4fun.com/Alive/xJS
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D46494
llvm-svn: 331685
Summary:
Split off from D46031.
In masked merge case, this degrades IPC by decreasing instruction count.
{F6108777}
The next patch should be able to recover and improve this.
This also affects the transform @spatel have added in D27489 / rL289738,
and the test coverage for X86 was missing.
But after i have added it, and looked at the changes in MCA, i'm somewhat confused.
{F6093591} {F6093592} {F6093593}
I'd say this regression is an improvement, since `IPC` increased in that case?
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: andreadb, llvm-commits, spatel
Differential Revision: https://reviews.llvm.org/D46493
llvm-svn: 331684
Split to support single/double for scalar, XMM and YMM/ZMM instructions - removing InstrRW overrides for these instructions.
Fixes Atom ADDSUBPD instruction and reclassifies VFPCLASS as WriteFCmp which is closer in behaviour.
llvm-svn: 331672
These are more like cross-lane shuffles than regular shuffles - we already do this for AVX512 equivalents.
Differential Revision: https://reviews.llvm.org/D46229
llvm-svn: 331659
Instead of enabling it for non NDEBUG builds, use -verify-cfiinstrs to
run verifier in CFIInstrInserter. It defaults to false.
Differential Revision: https://reviews.llvm.org/D46444
llvm-svn: 331635
WriteFRcp/WriteFRsqrt are split to support scalar, XMM and YMM/ZMM instructions.
WriteFSqrt is split into single/double/long-double sizes and scalar, XMM, YMM and ZMM instructions.
This removes all InstrRW overrides for these instructions.
NOTE: There were a couple of typos in the Znver1 model - notably a 1cy throughput for SQRT that is highly unlikely and doesn't tally with Agner.
NOTE: I had to add Agner's numbers for several targets for WriteFSqrt80.
llvm-svn: 331629
Summary:
The legacy VRCPPS/VRSQRTPS instructions aren't available in 512-bit versions. The new increased precision versions are. So we can use those to implement v16f32 reciprocal estimates.
For KNL CPUs we can probably use VRCP28PS/VRSQRT28PS and avoid the NR step altogether, but I leave that for a future patch.
Reviewers: spatel
Reviewed By: spatel
Subscribers: RKSimon, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D46498
llvm-svn: 331606
As Roman Tereshin pointed out in https://reviews.llvm.org/D45541, the
-global-isel option is redundant when -run-pass is given. -global-isel sets up
the GlobalISel passes in the pass manager but -run-pass skips that entirely and
configures it's own pipeline.
llvm-svn: 331603
