Currently when we build input sections list in linker script
we ignore all rel[a] sections. That was done to support
scripts like .rela.dyn : { *(.rela.data) } for emit relocs.
Though as a result following scripts were also silently ignored:
/DISCARD/ : { *(.rela.plt)
/DISCARD/ : { *(.rela.dyn)
and we produced output with this sections. That is not ideal.
The solution this patch suggests is simple: do not ignore synthetic
rel[a] sections. That way we can enable common discarding logic
for them and report a proper error.
Differential revision: https://reviews.llvm.org/D41640
llvm-svn: 328419
This fixes PR36367 which is about segfault when --emit-relocs is
used together with .eh_frame sections which happens because
of reordering of regular and .rel[a] sections.
Path changes loop that iterates over input sections to create
relocation target sections first.
Differential revision: https://reviews.llvm.org/D44679
llvm-svn: 328299
Patch teaches LLD to print BYTE/SHORT/LONG/QUAD and
location move commands to the map file.
Differential revision: https://reviews.llvm.org/D44004
llvm-svn: 327612
Patch do the following changes:
* Test case was converted from MIPS to x86.
* Removed part of the test checking we are able to produce a valid output.
Since we do that already in other tests, this one's intention should be
only to check we are still able to report overlaps and/or produce
broken output with overlaps.
Differential revision: https://reviews.llvm.org/D44438
llvm-svn: 327480
This follows recently started direction and sometimes
allows to fully get rid from `echo` calls.
I'll rename changed files to *.test in a follow-up.
llvm-svn: 327410
This finishes PR35877.
INSERT BEFORE used similar to INSERT AFTER,
it inserts sections before the given target section.
Differential revision: https://reviews.llvm.org/D44380
llvm-svn: 327378
This is part of PR36515.
With some linkerscripts it is possible to get file offset overlaps
and overflows. Currently LLD checks overlaps in checkNoOverlappingSections().
And also we allow broken output with --no-inhibit-exec.
Problem is that sometimes final offset of sections is completely broken
and we calculate output file size wrong and might crash.
Patch implements check to verify that there is no output section
which offset exceeds file size.
Differential revision: https://reviews.llvm.org/D43819
llvm-svn: 327376
This fixes PR36598.
LLD currently crashes when we have empty output section
with SHF_LINK_ORDER flag. This might happen if we place an
empty synthetic section in the linker script, but keep output
section alive with the use of additional symbol, for example.
The patch fixes the issue by dropping all special flags
for empty sections.
Differential revision: https://reviews.llvm.org/D44376
llvm-svn: 327374
AFTER keyword is mandatory and consume() was
used by mistake here. We accepted broken script before
this patch, testcase shows the issue.
llvm-svn: 327260
This implements INSERT AFTER in a following way:
During reading scripts it collects all insert statements.
After we done and read all files it inserts statements into script commands list.
With that:
* Rest of code does know nothing about INSERT.
* Approach is straightforward and have no visible limitations.
* It is also easy to support INSERT BEFORE (was seen in clang code once).
* Should work for PR35877 and similar cases.
Cons:
* It assumes we have "main" scripts that describes sections.
Differential revision: https://reviews.llvm.org/D43468
llvm-svn: 327003
It was raised during the review of D43819.
LLD usually use [X, Y] for reporting ranges, like below:
"relocation R_386_16 out of range: 65536 is not in [0, 65535]"
Patch changes rangeToString() to do the same.
Differential revision: https://reviews.llvm.org/D44207
llvm-svn: 326918
With fix: add missing "RUN:" prefix to test case.
Original commit message:
We do not report LMA region overflows currently.
Both GNU linkers do that. The patch implements it.
Differential revision: https://reviews.llvm.org/D44094
llvm-svn: 326895
We do not report LMA region overflows currently.
Both GNU linkers do that. The patch implements it.
Differential revision: https://reviews.llvm.org/D44094
llvm-svn: 326892
Currently, LLD segfaults when linker script attempts to discard
one of the hash sections. This patch fixes that.
Differential revision: https://reviews.llvm.org/D44012
llvm-svn: 326891
We do not expand memory region correctly for following scripts:
.foo.1 :
{
*(.foo.1)
. += 0x1000;
} > ram
Patch generalizes expanding of output sections and memory
regions in one place and fixes the issue.
Differential revision: https://reviews.llvm.org/D43999
llvm-svn: 326688
"division by zero" or "modulo by zero" are not
very informative errors and even probably confusing
as does not let to know that error is coming from linker script.
Patch adds location reporting.
Differential revision: https://reviews.llvm.org/D43934
llvm-svn: 326686
LLD can not catch a memory area overflow when using a data command.
If we have the script below:
.foo :
{
*(.foo)
BYTE(0x1)
} > ram
where BYTE overflows the ram region, we do not report it currently.
Patch fixes that.
Differential revision: https://reviews.llvm.org/D43948
llvm-svn: 326545
With the current code if the script has a PHDRS we always obey and try
to allocate a header. This can cause Min - HeaderSize to underflow.
It looks like bfd actually prints an error for this case. With this
patch we do the same.
Found while looking at pr36515.
llvm-svn: 326441
LLD crashes with broken scripts shown in testcase,
because fails to read memory regon name and accesses
MemoryRegions's element which is nullptr.
Patch fixes it.
Differential revision: https://reviews.llvm.org/D43866
llvm-svn: 326431
This is PR36515.
Currenly if we have a script like .debug_info 0 : { *(.debug_info) },
we would not remove this section and keep it in the output.
That does not work, because it is common case for
debug sections to have a zero address expression.
Patch changes behavior so that we remove only sections
that do not use symbols in its expressions.
Differential revision: https://reviews.llvm.org/D43863
llvm-svn: 326430
Summary:
This change removes large "echo" commands from the test by writing
tests themselves as linker scripts.
Reviewers: rafael
Subscribers: emaste, javed.absar, llvm-commits, arichardson
Differential Revision: https://reviews.llvm.org/D43900
llvm-svn: 326403
Some linker script test cases contain only a few lines of assembly
and a long linker script. Such tests are easier to maintain if we
write the main test file as a linkier script instead of assembly.
Differential Revision: https://reviews.llvm.org/D43887
llvm-svn: 326363
We should process symbols inside output section declarations the same way as top-level ones.
Differential Revision: https://reviews.llvm.org/D43008
llvm-svn: 326305
It should be possible to resolve undefined symbols in dynamic libraries
using symbols defined in a linker script.
Differential Revision: https://reviews.llvm.org/D43011
llvm-svn: 326176
This fixes pr36475.
I think this code can be simplified a bit, but I would like to check
in the more direct fix if we are in agreement on the direction and
then refactor.
This is not something that bfd does. The issue is not noticed in bfd
because it keeps fewer sections from the linkerscript in the output.
The reasons why it seems reasonable to do this:
- As George noticed, we would still keep the flags if the output
section had both an empty synthetic section and a regular section
- We need an heuristic to find the flags of output sections. Using the
flags of a synthetic section that would have been there seems a
reasonable heuristic.
llvm-svn: 326137
This continues direction started in D43069.
We can keep sections that are explicitly assigned to segment in script.
It helps to simplify code.
Differential revision: https://reviews.llvm.org/D43571
llvm-svn: 325887
This is for fixing PR36297.
Issue itself is that if we have SECTIONS { .bar (a+b) : { *(.stub) } };
script and no section .stub, when LLD will remove .bar, but
produce output with undefined symbols a and b.
Differential revision: https://reviews.llvm.org/D43069
llvm-svn: 325875
This responds to PR36475,
r325763 led to unexprected layout change, though
new behavior seems to be more correct.
Previously we could have following script:
.foo : { *(.foo) }
.bar : { *(.synthetic_empty) BYTE(0x11) }}
where synthetic_empty is a synthetic section which is empty and
hence removed by linker.
Before r325763 .bar would receive section flags from .synthetic_empty,
but after this revision it receives flags the same as .foo section has.
It is the same as if there would not be any synthetic_empty section in a script,
so looks reasonable and consistent behavior:
.foo : { *(.foo) }
.bar : { BYTE(0x11) }}
Patch adds testcase to document it.
Differential revision: https://reviews.llvm.org/D43632
llvm-svn: 325873
This removes script input file and inlines script into
testcase body. That is consistent with othet LS tests
and makes testcase easier to read.
llvm-svn: 325673
Currently, archive file name is missing in this message. In general,
we should avoid constructing strings in an ad-hoc manner and instead
use toString() to get consistent output strings.
Differential Revision: https://reviews.llvm.org/D43420
llvm-svn: 325416
This is PR35740 which now crashes
because we remove unused synthetic sections incorrectly.
We can keep input section description and corresponding output
section live even if it must be empty and dead.
This results in a crash because SHF_LINK_ORDER handling code
tries to access first section which is nullptr in this case.
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D42681
llvm-svn: 324463
Summary:
While trying to make a linker script behave the same way with lld as it did
with bfd, I discovered that lld currently doesn't diagnose overlapping
output sections. I was getting very strange runtime failures which I
tracked down to overlapping sections in the resulting binary. When linking
with ld.bfd overlapping output sections are an error unless
--noinhibit-exec is passed and I believe lld should behave the same way
here to avoid surprising crashes at runtime.
The patch also uncovered an errors in the tests: arm-thumb-interwork-thunk
was creating a binary where .got.plt was placed at an address overlapping
with .got.
Reviewers: ruiu, grimar, rafael
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D41046
llvm-svn: 323856
