As we traverse the CFG backwards, we could end up reaching unreachable
blocks. For unreachable blocks, we won't have computed post order
numbers and because DomAccess is reachable, unreachable blocks cannot be
on any path from it.
This fixes a crash with unreachable blocks.
Port partial constant store merging logic to MemorySSA backed DSE. The
heavy lifting is done by the existing helper function. It is used in
context where we already ensured that the later instruction can
eliminate the earlier one, if it is a complete overwrite.
isOverwrite expects the later location as first argument and the earlier
result later. The adjusted call is intended to check whether CC
overwrites DefLoc.
This patch relaxes the post-dominance requirement for accesses to
objects visible after the function returns.
Instead of requiring the killing def to post-dominate the access to
eliminate, the set of 'killing blocks' (= blocks that completely
overwrite the original access) is collected.
If all paths from the access to eliminate and an exit block go through a
killing block, the access can be removed.
To check this property, we first get the common post-dominator block for
the killing blocks. If this block does not post-dominate the access
block, there may be a path from DomAccess to an exit block not involving
any killing block.
Otherwise we have to check if there is a path from the DomAccess to the
common post-dominator, that does not contain a killing block. If there
is no such path, we can remove DomAccess. For this check, we start at
the common post-dominator and then traverse the CFG backwards. Paths are
terminated when we hit a killing block or a block that is not executed
between DomAccess and a killing block according to the post-order
numbering (if the post order number of a block is greater than the one
of DomAccess, the block cannot be in in a path starting at DomAccess).
This gives the following improvements on the total number of stores
after DSE for MultiSource, SPEC2K, SPEC2006:
Tests: 237
Same hash: 206 (filtered out)
Remaining: 31
Metric: dse.NumRemainingStores
Program base new100 diff
test-suite...CFP2000/188.ammp/188.ammp.test 3624.00 3544.00 -2.2%
test-suite...ch/g721/g721encode/encode.test 128.00 126.00 -1.6%
test-suite.../Benchmarks/Olden/mst/mst.test 73.00 72.00 -1.4%
test-suite...CFP2006/433.milc/433.milc.test 3202.00 3163.00 -1.2%
test-suite...000/186.crafty/186.crafty.test 5062.00 5010.00 -1.0%
test-suite...-typeset/consumer-typeset.test 40460.00 40248.00 -0.5%
test-suite...Source/Benchmarks/sim/sim.test 642.00 639.00 -0.5%
test-suite...nchmarks/McCat/09-vor/vor.test 642.00 644.00 0.3%
test-suite...lications/sqlite3/sqlite3.test 35664.00 35563.00 -0.3%
test-suite...T2000/300.twolf/300.twolf.test 7202.00 7184.00 -0.2%
test-suite...lications/ClamAV/clamscan.test 19475.00 19444.00 -0.2%
test-suite...INT2000/164.gzip/164.gzip.test 2199.00 2196.00 -0.1%
test-suite...peg2/mpeg2dec/mpeg2decode.test 2380.00 2378.00 -0.1%
test-suite.../Benchmarks/Bullet/bullet.test 39335.00 39309.00 -0.1%
test-suite...:: External/Povray/povray.test 36951.00 36927.00 -0.1%
test-suite...marks/7zip/7zip-benchmark.test 67396.00 67356.00 -0.1%
test-suite...6/464.h264ref/464.h264ref.test 31497.00 31481.00 -0.1%
test-suite...006/453.povray/453.povray.test 51441.00 51416.00 -0.0%
test-suite...T2006/401.bzip2/401.bzip2.test 4450.00 4448.00 -0.0%
test-suite...Applications/kimwitu++/kc.test 23481.00 23471.00 -0.0%
test-suite...chmarks/MallocBench/gs/gs.test 6286.00 6284.00 -0.0%
test-suite.../CINT2000/254.gap/254.gap.test 13719.00 13715.00 -0.0%
test-suite.../Applications/SPASS/SPASS.test 30345.00 30338.00 -0.0%
test-suite...006/450.soplex/450.soplex.test 15018.00 15016.00 -0.0%
test-suite...ications/JM/lencod/lencod.test 27780.00 27777.00 -0.0%
test-suite.../CINT2006/403.gcc/403.gcc.test 105285.00 105276.00 -0.0%
There might be potential to pre-compute some of the information of which
blocks are on the path to an exit for each block, but the overall
benefit might be comparatively small.
On the set of benchmarks, 15738 times out of 20322 we reach the
CFG check, the CFG check is successful. The total number of iterations
in the CFG check is 187810, so on average we need less than 10 steps in
the check loop. Bumping the threshold in the loop from 50 to 150 gives a
few small improvements, but I don't think they warrant such a big bump
at the moment. This is all pending further tuning in the future.
Reviewers: dmgreen, bryant, asbirlea, Tyker, efriedma, george.burgess.iv
Reviewed By: george.burgess.iv
Differential Revision: https://reviews.llvm.org/D78932
- Now all SalvageDebugInfo() calls will mark undef if the salvage
attempt fails.
Reviewed by: vsk, Orlando
Differential Revision: https://reviews.llvm.org/D78369
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
Using the existing NumFastStores statistic can be misleading when
comparing the impact of DSE patches.
For example, consider the case where a store gets removed from a
function before it is inlined into another function. A less
powerful DSE might only remove the store from functions it has
been inlined into, which will result in more stores being removed, but
no difference in the actual number of stores after DSE.
The new stat provides the absolute number of stores surviving after
DSE.
Reviewers: dmgreen, bryant, asbirlea, jfb
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D78830
This patch slightly improves the formatting of the debug output, adds a
few missing outputs and makes some existing outputs more consistent with
the rest.
We can eliminate MemoryDefs of objects not accessible after the function
returns (e.g. alloca), if there are no reads between the MemoryDef and
any function exits. We can stop traversing paths that completely
overwrite the memory location of the MemoryDef.
This patch was split off D73763.
Reviewers: dmgreen, bryant, asbirlea, Tyker, efriedma, george.burgess.iv
Reviewed By: asbirlea, george.burgess.iv
Differential Revision: https://reviews.llvm.org/D77736
callCapturesBefore always returns ModRef , if UseInst isn't a call. As
we only call it if we already know Mod is set, this only destroys the
Must bit for non-calls.
For MemoryPhis, we have to avoid that the MemoryPhi may be executed
before before the access we are currently looking at.
To do this we do a post-order numbering of the basic blocks in the
function and bail out once we reach a MemoryPhi with a larger (or equal)
post-order block number than the current MemoryAccess.
This changes the order in which we visit stores for elimination.
This patch also adds support for exploring multiple paths. We keep a worklist (ToCheck) of memory accesses that might be eliminated by our starting MemoryDef or MemoryPhis for further exploration. For MemoryPhis, we add the incoming values to the worklist, for MemoryDefs we add the defining access.
Reviewers: dmgreen, rnk, efriedma, bryant, asbirlea
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D72148
DSE would mistakenly remove store (2):
a = calloc(n+1)
for (int i = 0; i < n; i++) {
store 1, a[i+1] // (1)
store 0, a[i] // (2)
}
The fix is to do PHI transaltion while looking for clobbering
instructions between the store and the calloc.
Reviewed By: efriedma, bjope
Differential Revision: https://reviews.llvm.org/D68006
Add a map from BasicBlocks to overlap intervals. For partial writes, we
can keep track of those in IOLs. We only add candidates that are valid
for eliminations.
Reviewers: dmgreen, bryant, asbirlea, Tyker
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D73757
Can be used like
-debug-counter=dse-memoryssa-skip=10,dse-memoryssa-counter-count=20
Reviewers: dmgreen, rnk, efriedma, bryant, asbirlea
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D72147
Essentially, fold OrderedBasicBlock into BasicBlock, and make it
auto-invalidate the instruction ordering when new instructions are
added. Notably, we don't need to invalidate it when removing
instructions, which is helpful when a pass mostly delete dead
instructions rather than transforming them.
The downside is that Instruction grows from 56 bytes to 64 bytes. The
resulting LLVM code is substantially simpler and automatically handles
invalidation, which makes me think that this is the right speed and size
tradeoff.
The important change is in SymbolTableTraitsImpl.h, where the numbering
is invalidated. Everything else should be straightforward.
We probably want to implement a fancier re-numbering scheme so that
local updates don't invalidate the ordering, but I plan for that to be
future work, maybe for someone else.
Reviewed By: lattner, vsk, fhahn, dexonsmith
Differential Revision: https://reviews.llvm.org/D51664
This reverts commit d0c4d4fe0929098a98d9fb20c5e5e19d71341517.
Revert "[DSE,MSSA] Move more passing test cases from todo to simple.ll."
This reverts commit 02266e64bb6dacf76f3aa510df4b59f66d834b1f.
Revert "[DSE,MSSA] Adjust mda-with-dbg-values.ll to MSSA backed DSE."
This reverts commit 74f03e4ff0c1f11c29102329af95f7d9782426dc.
This patch adds a first version of a MemorySSA based DSE. It is missing
a lot of features, which will get added as follow-ups, to help to keep
the review manageable.
The patch uses the following general approach: given a MemoryDef, walk
upwards to find clobbering MemoryDefs that may be killed by the
starting def. Then check that there are no uses that may read the
location of the original MemoryDef in between both MemoryDefs. A bit
more concretely:
For all MemoryDefs StartDef:
1. Get the next dominating clobbering MemoryDef (DomAccess) by walking upwards.
2. Check that there no reads between DomAccess and the StartDef by checking
all uses starting at DomAccess and walking until we see StartDef.
3. For each found DomDef, check that:
1. There are no barrier instructions between DomDef and StartDef (like
throws or stores with ordering constraints).
2. StartDef is executed whenever DomDef is executed.
3. StartDef completely overwrites DomDef.
4. Erase DomDef from the function and MemorySSA.
The patch uses a very simple approach to guarantee that no throwing
instructions are between 2 stores: We only allow accesses to stack
objects, access that are in the same basic block if the block does not
contain any throwing instructions or accesses in functions that do
not contain any throwing instructions. This will get lifted later.
Besides adding support for the missing cases, there is plenty of additional
potential for improvements as follow-up work, e.g. the way we visit stores
(could be just a traversal of the MemorySSA, rather than collecting them
up-front), using the alias information discovered during walking to optimize
the MemorySSA.
This is loosely based on D40480 by Dave Green.
Reviewers: dmgreen, rnk, efriedma, bryant, asbirlea, Tyker
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D72700
This copies the DSE tests into a MSSA subdirectory to test the MemorySSA
backed DSE implementation, without disturbing the original tests.
Differential Revision: https://reviews.llvm.org/D72145
The patch makes sure that the LastThrowing pointer does not point to any instruction deleted by call to DeleteDeadInstruction.
While iterating through the instructions the pass maintains a pointer to the lastThrowing Instruction. A call to deleteDeadInstruction deletes a dead store and other instructions feeding the original dead instruction which also become dead. The instruction pointed by the lastThrowing pointer could also be deleted by the call to DeleteDeadInstruction and thus it becomes a dangling pointer. Because of this, we see an error in the next iteration.
In the patch, we maintain a list of throwing instructions encountered previously and use the last non deleted throwing instruction from the container.
Reviewers: fhahn, bcahoon, efriedma
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D65326
The patch makes sure that the LastThrowing pointer does not point to any instruction deleted by call to DeleteDeadInstruction.
While iterating through the instructions the pass maintains a pointer to the lastThrowing Instruction. A call to deleteDeadInstruction deletes a dead store and other instructions feeding the original dead instruction which also become dead. The instruction pointed by the lastThrowing pointer could also be deleted by the call to DeleteDeadInstruction and thus it becomes a dangling pointer. Because of this, we see an error in the next iteration.
In the patch, we maintain a list of throwing instructions encountered previously and use the last non deleted throwing instruction from the container.
Patch by Ankit <quic_aankit@quicinc.com>
Reviewers: fhahn, bcahoon, efriedma
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D65326
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Summary:
The DeadStoreElimination pass now skips doing
PartialStoreMerging when stores overlap according to
OW_PartialEarlierWithFullLater and at least one of
the stores is having a store size that is different
from the size of the type being stored.
This solves problems seen in
https://bugs.llvm.org/show_bug.cgi?id=41949
for which we in the past could end up with
mis-compiles or assertions.
The content and location of the padding bits is not
formally described (or undefined) in the LangRef
at the moment. So the solution is chosen based on
that we cannot assume anything about the padding bits
when having a store that clobbers more memory than
indicated by the type of the value that is stored
(such as storing an i6 using an 8-bit store instruction).
Fixes: https://bugs.llvm.org/show_bug.cgi?id=41949
Reviewers: spatel, efriedma, fhahn
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62250
llvm-svn: 361605
Summary:
Both the input Value pointer and the returned Value
pointers in GetUnderlyingObjects are now declared as
const.
It turned out that all current (in-tree) uses of
GetUnderlyingObjects were trivial to update, being
satisfied with have those Value pointers declared
as const. Actually, in the past several of the users
had to use const_cast, just because of ValueTracking
not providing a version of GetUnderlyingObjects with
"const" Value pointers. With this patch we get rid
of those const casts.
Reviewers: hfinkel, materi, jkorous
Reviewed By: jkorous
Subscribers: dexonsmith, jkorous, jholewinski, sdardis, eraman, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61038
llvm-svn: 359072
Bug: https://bugs.llvm.org/show_bug.cgi?id=41175
In the bug test case the DSE pass is shortening the range of memory that a
memset is working on. A getelementptr is generated so that the new
starting address can be passed to memset. This instruction was not given
a DebugLoc.
To fix the bug, copy the DebugLoc from the memset instruction.
Patch by Orlando Cazalet-Hyams!
Differential Revision: https://reviews.llvm.org/D60556
llvm-svn: 358270
Updated to use DenseMap::insert instead of [] operator for insertion, to
avoid a crash caused by epoch checks.
This reverts commit 2b85de438326f9d27bc96dc934ec98b98abdb337.
llvm-svn: 357257
By extending OrderedBB to allow removing and replacing cached
instructions, we can preserve OrderedBBs in DSE easily. This eliminates
one source of quadratic compile time in DSE.
Fixes PR38829.
Reviewers: rnk, efriedma, hfinkel
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D59789
llvm-svn: 357208
This cleans up all GetElementPtr creation in LLVM to explicitly pass a
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57173
llvm-svn: 352913
