This patch adds desired feature flags in JIT compiler to enable
hard-float instructions if target supports them and allows to use floats
and doubles in lldb expressions.
Fited tests:
lldb-shell :: Expr/TestAnonNamespaceParamFunc.cpp
lldb-shell :: Expr/TestIRMemoryMap.test
lldb-shell :: Expr/TestStringLiteralExpr.test
lldb-shell :: SymbolFile/DWARF/debug-types-expressions.test
Similar as #99336
Depens on: https://github.com/llvm/llvm-project/pull/114741
Reviewed By: SixWeining
Pull Request: https://github.com/llvm/llvm-project/pull/114742
[lldb][RISCV] add jitted function calls to ABI
Function calls support in LLDB expressions for RISCV: 1 of 4
Augments corresponding functionality to RISCV ABI, which allows to jit
lldb expressions and thus make function calls inside them. Only function
calls with integer and void function arguments and return value are
supported.
[lldb][RISCV] add JIT relocations resolver
Function calls support in LLDB expressions for RISCV: 2 of 4
Adds required RISCV relocations resolving functionality in lldb
ExecutionEngine.
[lldb][RISCV] RISC-V large code model in lldb expressions
Function calls support in LLDB expressions for RISCV: 3 of 4
This patch sets large code model in MCJIT settings for RISC-V 64-bit targets
that allows to make assembly jumps at any 64bit address. This is needed,
because resulted jitted code may contain more that +-2GB jumps, that are
not available in RISC-V with medium code model.
[lldb][RISCV] doubles support in lldb expressions
Function calls support in LLDB expressions for RISCV: 4 of 4
This patch adds desired feature flags in MCJIT compiler to enable
hard-float instructions if target supports them and allows to use floats
and doubles in lldb expressions.
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
…NFC]
This patch is the first patch in a series reworking of Pete Lawrence's
(@PortalPete) amazing proposal for better expression evaluator error
messages (https://github.com/llvm/llvm-project/pull/80938)
This patch is preparatory patch for improving the rendering of
expression evaluator diagnostics. Currently diagnostics are rendered
into a string and the command interpreter layer then textually parses
words like "error:" to (sometimes) color the output accordingly. In
order to enable user interfaces to do better with diagnostics, we need
to store them in a machine-readable fromat. This patch does this by
adding a new llvm::Error kind wrapping a DiagnosticDetail struct that
is used when the error type is eErrorTypeExpression. Multiple
diagnostics are modeled using llvm::ErrorList.
Right now the extra information is not used by the CommandInterpreter,
this will be added in a follow-up patch!
Don't call raw_string_ostream::flush(), which is essentially a no-op. As
specified in the docs, raw_string_ostream is always unbuffered. (
65b13610a5226b84889b923bae884ba395ad084d for further reference )
As specified in the docs,
1) raw_string_ostream is always unbuffered and
2) the underlying buffer may be used directly
( 65b13610a5226b84889b923bae884ba395ad084d for further reference )
* Don't call raw_string_ostream::flush(), which is essentially a no-op.
* Avoid unneeded calls to raw_string_ostream::str(), to avoid excess
indirection.
This is an oversight from https://github.com/llvm/llvm-project/pull/104817 where the intention
was to hoist the ExternalASTSourceWrapper construction out of the
conditional so it can be set on both the `SemaSourceWithPriorities` and
be added as an external source to Sema. But the inner
`ExternalASTSourceWrapper` allocation wasn't actually removed.
This currently all works fine because all these AST sources are
refcounted and point to the same underlying AST sources. But this
patch cleans this up regardless.
This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
While parsing an expression, Clang tries to diagnose usage of decls
(with possibly non-external linkage) for which it hasn't been provided
with a definition. This is the case, e.g., for functions with parameters
that live in an anonymous namespace (those will have `UniqueExternal`
linkage, this is computed [here in
computeTypeLinkageInfo](ea8bb4d633/clang/lib/AST/Type.cpp (L4647-L4653))).
Before diagnosing such situations, Clang calls
`ExternalSemaSource::ReadUndefinedButUsed`. The intended use of this API
is to extend the set of "used but not defined" decls with additional
ones that the external source knows about. However, in LLDB's case, we
never provide `FunctionDecl`s with a definition, and instead rely on the
expression parser to resolve those symbols by linkage name. Thus, to
avoid the Clang parser from erroring out in these situations, this patch
implements `ReadUndefinedButUsed` which just removes the "undefined"
non-external `FunctionDecl`s that Clang found.
We also had to add an `ExternalSemaSource` to the `clang::Sema` instance
LLDB creates. We previously didn't have any source on `Sema`. Because we
add the `ExternalASTSourceWrapper` here, that means we'd also
technically be adding the `ClangExpressionDeclMap` as an
`ExternalASTSource` to `Sema`, which is fine because `Sema` will only be
calling into the `ExternalSemaSource` APIs (though nothing currently
strictly enforces this, which is a bit worrying).
Note, the decision for whether to put a function into `UndefinedButUsed`
is done in
[Sema::MarkFunctionReferenced](ea8bb4d633/clang/lib/Sema/SemaExpr.cpp (L18083-L18087)).
The `UniqueExternal` linkage computation is done in
[getLVForNamespaceScopeDecl](ea8bb4d633/clang/lib/AST/Decl.cpp (L821-L833)).
Fixes https://github.com/llvm/llvm-project/issues/104712
When we use `SemaSourceWithPriorities` as the `ASTContext`s
ExternalASTSource, we allocate a `ClangASTSourceProxy` (via
`CreateProxy`) and two `ExternalASTSourceWrapper`. Then we push these
sources into a vector in `SemaSourceWithPriorities`. The allocated
`SemaSourceWithPriorities` itself will get properly deallocated because
the `ASTContext` wraps it in an `IntrusiveRefCntPtr`. But the three
sources we allocated earlier will never get released.
This patch fixes this by mimicking what `MultiplexExternalSemaSource`
does (which is what `SemaSourceWithPriorities` is based on anyway).
I.e., when `SemaSourceWithPriorities` gets constructed, it increments
the use count of its sources. And on destruction it decrements them.
Similarly, to make sure we dealloacted the `ClangASTProxy` properly, the
`ExternalASTSourceWrapper` now assumes shared ownership of the
underlying source.
Depends on https://github.com/llvm/llvm-project/pull/102488
This reverts commit
cf56e265e4.
The original change was reverted because it was causing linker failures
in the unit-tests:
```
Undefined symbols for architecture arm64:
"lldb_private::PlatformDarwin::GetSDKPathFromDebugInfo(lldb_private::Module&)",
referenced from:
lldb_private::ClangExpressionParser::ClangExpressionParser(lldb_private::ExecutionContextScope*,
lldb_private::Expression&, bool,
std::__1::vector<std::__1::basic_string<char,
std::__1::char_traits<char>, std::__1::allocator<char>>,
std::__1::allocator<std::__1::basic_string<char,
std::__1::char_traits<char>, std::__1::allocator<char>>>>,
std::__1::basic_string<char, std::__1::char_traits<char>,
std::__1::allocator<char>>) in
liblldbPluginExpressionParserClang.a[11](ClangExpressionParser.cpp.o)
ld: symbol(s) not found for architecture arm64
c++: error: linker command failed with exit code 1 (use -v to see
invocation)
```
The relanded version differs only in the fact that we now use the
generic `Platform` abstraction to get to `GetSDKPathFromDebugInfo`.
This reverts commit 1cbcf74083e92021472ec9644b88418f377ce550.
unittests do not build because liblldbPluginExpressionParserClang.a now
depends on liblldbPluginPlatformMacOSX.a when built on macOS, reverting
until we can straighten out the dependency.
This patch changes the way we initialize `BuiltinHeadersInSystemModules`
which is one of the flags controlling Clang's behaviour when the Darwin
module is split into more fine-grained modules. The
ClangExpressionParser currently unconditionally sets
`-fbuiltin-headers-in-system-modules` when evaluating expressions with
the `target.import-std-module` setting. This flag should, however, be
set depending on the SDK version (which is what the Clang Darwin
toolchain does).
Unfortunately, the compiler instance that we create with
`ClangExpressionParser` never consults the Clang driver, and thus
doesn't correctly infer `BuiltinHeadersInSystemModules`. Note, this
isn't an issue with the `CompilerInstance` that the
`ClangModulesDeclVendor` creates because it uses the `createInovcation`
API, which calls into `Darwin::addClangTargetOptions`.
This patch mimicks how `sdkSupportsBuiltinModules` is used in
`Darwin::addClangTargetOptions`.
This ensures that the `import-std-module` API tests run cleanly
regardless of SDK version.
The plan is to eventually make the `CompilerInstance` construction in
`ClangExpressionParser` go through the driver, so we can avoid
duplicating the logic in LLDB. But we aren't there yet.
**Implementation**
* We look for the `SDKSettings.json` in the sysroot directory that we
found in DWARF (via `DW_AT_LLVM_sysroot`)
* Then parse this file and extract the SDK version number out of it
* Then mimick `sdkSupportsBuiltinModules` from `Toolchains/Darwin.cpp`
and set `BuiltinHeadersInSystemModules` based on it
rdar://116490281
We plan to eventually use the Clang driver to initialize the
`CompilerInstance`.
This should make refactorings of this code more straightforward.
**Changes**:
* Introduced `SetupLangOpts` and `SetupImportStdModuleLangOpts`
* Called them from `ClangExpressionParser::ClangExpressionParser`
`CreateTargetInfo` can return a `nullptr` in a couple cases. So we
should log that and let the user know something is wrong (hence the
`lldbassert`).
I didn't actually run into this. Just stumbled upon it from reading the
code.
Same motivation as https://github.com/llvm/llvm-project/pull/101669. We
plan to eventually use the Clang driver to initialize the
`CompilerInstance`.
This should make refactorings of this code more straightforward.
**Changes**:
* Introduced `SetupTargetOpts`
* Called them from `ClangExpressionParser::ClangExpressionParser`
* Made `GetClangTargetABI` a file-local function since it's not using
any of the state in `ClangExpressionParser`, and isn't used anywhere
outside the source file
This patch adds a new `DoPrepareForExecution` API, which can be
implemented by the Clang and Swift language plugins. This also moves
`RunStaticInitializers` into `ExpressionParser::PrepareForExecution`, so
we call it consistently between language plugins.
This *should* be mostly NFC (the static initializers will still only run
after we finished parsing). We've been living on this patch downstream
for sometime now.
rdar://130267058
that separates out language and version. To avoid reinventing the wheel
and introducing subtle incompatibilities, this API uses the table of
languages and versiond defined by the upcoming DWARF 6 standard
(https://dwarfstd.org/languages-v6.html). While the DWARF 6 spec is not
finialized, the list of languages is broadly considered stable.
The primary motivation for this is to allow the Swift language plugin to
switch between language dialects between, e.g., Swift 5.9 and 6.0 with
out introducing a ton of new language codes. On the main branch this
change is considered NFC.
Depends on https://github.com/llvm/llvm-project/pull/89980
This patch attempts to decouple C++ expression evaluation from
Objective-C support. We've previously enabled it by default (if a
runtime existed), but that meant we're opting into extra work we only
need to do for Objective-C, which complicates/slows down C++ expression
evaluation. Of course there's a valid use-case for this, which is
calling Objective-C APIs when stopped in C++ frames (which Objective-C++
developers might want to do). In those cases we should really prompt the
user to add the `expr --language objc++` flag. To accomodate a likely
frequent use-case where a user breaks in a system C++ library (without
debug-symbols) but their application is actually an Objective-C app, we
allow Objective-C support in C++ expressions if the current frame
doesn't have debug-info.
This fixes https://github.com/llvm/llvm-project/issues/75443 and allows
us to add more `LangOpts.ObjC` guards around the expression evaluator in
the future (e.g., we could avoid looking into the Objective-C runtime
during C++ expression evaluation, which we currently do
unconditionally).
Depends on https://github.com/llvm/llvm-project/pull/87657
Currently, for x86 and x86_64 triples, "+sse" and "+sse2" are appended
to `Features` vector of `TargetOptions` unconditionally. This vector is
later reset in `TargetInfo::CreateTargetInfo` and filled using info from
`FeaturesAsWritten` vector, so previous modifications of the `Features`
vector have no effect. For x86_64 triple, we append "sse2"
unconditionally in `X86TargetInfo::initFeatureMap`, so despite the
`Features` vector reset, we still have the desired sse features enabled.
The corresponding code in `X86TargetInfo::initFeatureMap` is marked as
FIXME, so we should not probably rely on it and should set desired
features properly in `ClangExpressionParser`.
This patch changes the vector the features are appended to from
`Features` to `FeaturesAsWritten`. It's not reset later and is used to
compute resulting `Features` vector.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
This patch tentatively fixes the various test failures introduced
following 0ea3d88bdb16:
https://green.lab.llvm.org/green/view/LLDB/job/as-lldb-cmake/6316/
From my understanding, the main issue here is that we can't find some headers
when evaluating C++ expressions since those headers have been promoted
to be system modules, and to be shipped as part of the toolchain.
Prior to 0ea3d88bdb16, the `BuiltinHeadersInSystemModules` flag for in
the clang `LangOpts` struct was always set, however, after it landed,
the flag becomes opt-in, depending on toolchain that is used with the
compiler instance. This gets set in `clang::createInvocation` down to
`Darwin::addClangTargetOptions`, as this is used mostly on Apple platforms.
However, since `ClangExpressionParser` makes a dummy `CompilerInstance`,
and sets the various language options arbitrarily, instead of using the
`clang::createInvocation`, the flag remains unset, which causes the
various error messages:
```
AssertionError: 'error: module.modulemap:96:11: header 'stdarg.h' not found
96 | header "stdarg.h" // note: supplied by the compiler
| ^
```
Given that this flag was opt-out previously, this patch brings back that
behavior by setting it in lldb's `ClangExpressionParser` constructor,
until we actually decide to pull the language options from the compiler driver.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
StreamFile subclasses Stream (from lldbUtility) and is backed by a File
(from lldbHost). It does not depend on anything from lldbCore or any of its
sibling libraries, so I think it makes sense for this to live in
lldbHost instead.
Differential Revision: https://reviews.llvm.org/D157460
This is the next patch after D146058. We can now parse expressions to print instance variables from ObjC classes. Until now the expression parser would bail out with an error like this:
```
error: expression failed to parse:
error: Error [IRForTarget]: Couldn't find Objective-C indirect ivar symbol OBJC_IVAR_$_TestObj._int
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D146154
This patch allows users to evaluate expressions using
`expr -l c++20`. Currently DWARF keeps the CU's at
`DW_AT_language` at `DW_LANG_C_plus_plus_14` even
when compiling with `-std=c++20`. So even in "C++20
programs" expression evaluation will by default be
performed in `C++11` mode for now.
Enabling `C++14` has been previously attempted at
https://reviews.llvm.org/D80308
There are some remaining issues around evaluating C++20
expressions. Mainly, lack of support for C++20 AST nodes in
`clang::ASTImporter`. But these can be addressed in follow-up
patches.
I came accross this, because a lot of regression tests were saying:
```
(lldb) p argc
error: expression failed to parse:
error: couldn't install checkers, unknown error
```
With this change, error messages provide more detail:
```
(lldb) p argc
error: expression failed to parse:
error: couldn't install checkers:
error: Couldn't lookup symbols:
__objc_load
```
I didn't find a case where `Diagnostics()` is not empty. Also it looks like this isn't covered in any test (yet).
Reviewed By: bulbazord, Michael137
Differential Revision: https://reviews.llvm.org/D146541
/data/llvm-project/lldb/source/Plugins/ExpressionParser/Clang/ClangExpressionParser.cpp:398:34: error: variable 'lang_rt' set but not used [-Werror,-Wunused-but-set-variable]
lldb_private::LanguageRuntime *lang_rt = nullptr;
^
1 error generated.
Currently default simd alignment is defined by Clang specific TargetInfo class.
This class cannot be reused for LLVM Flang. That's why default simd alignment
calculation has been moved to OMPIRBuilder which is common for Flang and Clang.
Previous attempt: https://reviews.llvm.org/D138496 was wrong because
the default alignment depended on the number of built LLVM targets.
If we wanted to calculate the default alignment for PPC and we hadn't specified
PPC LLVM target to build, then we would get 0 as the alignment because
OMPIRBuilder couldn't create PPCTargetMachine object and it returned 0 as
the default value.
If PPC LLVM target had been built earlier, then OMPIRBuilder could have created
PPCTargetMachine object and it would have returned 128.
Differential Revision: https://reviews.llvm.org/D141910
Reviewed By: jdoerfert
The forwarding header is left in place because of its use in
`polly/lib/External/isl/interface/extract_interface.cc`, but I have
added a GCC warning about the fact it is deprecated, because it is used
in `isl` from where it is included by Polly.
Currently default simd alignment is defined by Clang specific TargetInfo class.
This class cannot be reused for LLVM Flang. That's why default simd alignment
calculation has been moved to OMPIRBuilder which is common for Flang and Clang.
Previous attempt: https://reviews.llvm.org/D138496 was wrong because
the default alignment depended on the number of built LLVM targets.
If we wanted to calculate the default alignment for PPC and we hadn't specified
PPC LLVM target to build, then we would get 0 as the alignment because
OMPIRBuilder couldn't create PPCTargetMachine object and it returned 0 as
the default value.
If PPC LLVM target had been built earlier, then OMPIRBuilder could have created
PPCTargetMachine object and it would have returned 128.
Differential Revision: https://reviews.llvm.org/D141910
Reviewed By: jdoerfert
Currently default simd alignment is specified by Clang specific TargetInfo
class. This class cannot be reused for LLVM Flang. If we move the default
alignment field into TargetMachine class then we can create TargetMachine
objects and query them to find SIMD alignment.
Scope of changes:
1) Added information about maximal allowed SIMD alignment to TargetMachine
classes.
2) Removed getSimdDefaultAlign function from Clang TargetInfo class.
3) Refactored createTargetMachine function.
Reviewed By: jsjodin
Differential Revision: https://reviews.llvm.org/D138496
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
When a process gets restarted TypeSystem objects associated with it
may get deleted, and any CompilerType objects holding on to a
reference to that type system are a use-after-free in waiting. Because
of the SBAPI, we don't have tight control over where CompilerTypes go
and when they are used. This is particularly a problem in the Swift
plugin, where the scratch TypeSystem can be restarted while the
process is still running. The Swift plugin has a lock to prevent
abuse, but where there's a lock there can be bugs.
This patch changes CompilerType to store a std::weak_ptr<TypeSystem>.
Most of the std::weak_ptr<TypeSystem>* uglyness is hidden by
introducing a wrapper class CompilerType::WrappedTypeSystem that has a
dyn_cast_or_null() method. The only sites that need to know about the
weak pointer implementation detail are the ones that deal with
creating TypeSystems.
rdar://101505232
Differential Revision: https://reviews.llvm.org/D136650
