This adds the basic assembly generation support for the final EH
proposal, which was newly adopted in Sep 2023 and advanced into Phase 4
in Jul 2024:
https://github.com/WebAssembly/exception-handling/blob/main/proposals/exception-handling/Exceptions.md
This adds support for the generation of new `try_table` and `throw_ref`
instruction in .s asesmbly format. This does NOT yet include
- Block annotation comment generation for .s format
- .o object file generation
- .s assembly parsing
- Type checking (AsmTypeCheck)
- Disassembler
- Fixing unwind mismatches in CFGStackify
These will be added as follow-up PRs.
---
The format for `TRY_TABLE`, both for `MachineInstr` and `MCInst`, is as
follows:
```
TRY_TABLE type number_of_catches catch_clauses*
```
where `catch_clause` is
```
catch_opcode tag+ destination
```
`catch_opcode` should be one of 0/1/2/3, which denotes
`CATCH`/`CATCH_REF`/`CATCH_ALL`/`CATCH_ALL_REF` respectively. (See
`BinaryFormat/Wasm.h`) `tag` exists when the catch is one of `CATCH` or
`CATCH_REF`.
The MIR format is printed as just the list of raw operands. The
(stack-based) assembly instruction supports pretty-printing, including
printing `catch` clauses by name, in InstPrinter.
In addition to the new instructions `TRY_TABLE` and `THROW_REF`, this
adds four pseudo instructions: `CATCH`, `CATCH_REF`, `CATCH_ALL`, and
`CATCH_ALL_REF`. These are pseudo instructions to simulate block return
values of `catch`, `catch_ref`, `catch_all`, `catch_all_ref` clauses in
`try_table` respectively, given that we don't support block return
values except for one case (`fixEndsAtEndOfFunction` in CFGStackify).
These will be omitted when we lower the instructions to `MCInst` at the
end.
LateEHPrepare now will have one more stage to covert
`CATCH`/`CATCH_ALL`s to `CATCH_REF`/`CATCH_ALL_REF`s when there is a
`RETHROW` to rethrow its exception. The pass also converts `RETHROW`s
into `THROW_REF`. Note that we still use `RETHROW` as an interim pseudo
instruction until we convert them to `THROW_REF` in LateEHPrepare.
CFGStackify has a new `placeTryTableMarker` function, which places
`try_table`/`end_try_table` markers with a necessary `catch` clause and
also `block`/`end_block` markers for the destination of the `catch`
clause.
In MCInstLower, now we need to support one more case for the multivalue
block signature (`catch_ref`'s destination's `(i32, exnref)` return
type).
InstPrinter has a new routine to print the `catch_list` type, which is
used to print `try_table` instructions.
The new test, `exception.ll`'s source is the same as
`exception-legacy.ll`, with the FileCheck expectations changed. One
difference is the commands in this file have `-wasm-enable-exnref` to
test the new format, and don't have `-wasm-disable-explicit-locals
-wasm-keep-registers`, because the new custom InstPrinter routine to
print `catch_list` only works for the stack-based instructions (`_S`),
and we can't use `-wasm-keep-registers` for them.
As in `exception-legacy.ll`, the FileCheck lines for the new tests do
not contain the whole program; they mostly contain only the control flow
instructions for readability.
Fixes#85578, a use-after-free caused by some `MCSymbolWasm` data being
freed too early.
Previously, `WebAssemblyAsmParser` owned the data that is moved to
`MCContext` by this PR, which caused problems when handling module ASM,
because the ASM parser was destroyed after parsing the module ASM, but
the symbols persisted.
The added test passes locally with an LLVM build with AddressSanitizer
enabled.
Implementation notes:
* I've called the added method
<code>allocate<b><i>Generic</i></b>String</code> and added the second
paragraph of its documentation to maybe guide people a bit on when to
use this method (based on my (limited) understanding of the `MCContext`
class). We could also just call it `allocateString` and remove that
second paragraph.
* The added `createWasmSignature` method does not support taking the
return and parameter types as arguments: Specifying them afterwards is
barely any longer and prevents them from being accidentally specified in
the wrong order.
* This removes a _"TODO: Do the uniquing of Signatures here instead of
ObjectFileWriter?"_ since the field it's attached to is also removed.
Let me know if you think that TODO should be preserved somewhere.
Move WebAssemblyUtilities from Utils to the CodeGen library. It
primarily deals in MIR layer types, so it really lives in the CodeGen
library.
Move a variety of other things around to try create better separation.
See issue #64166 for more info on layering.
Move llvm/include/CodeGen/WasmAddressSpaces.h back to
llvm/lib/Target/WebAssembly/Utils.
Differential Revision: https://reviews.llvm.org/D156472
Change MCInstrDesc::operands to return an ArrayRef so we can easily use
it everywhere instead of the (IMHO ugly) opInfo_begin and opInfo_end.
A future patch will remove opInfo_begin and opInfo_end.
Also use it instead of raw access to the OpInfo pointer. A future patch
will remove this pointer.
Differential Revision: https://reviews.llvm.org/D142213
This refactors some code dealing with setting Wasm symbol types.
Some of the code dealing with types was moved from
`WebAssemblyUtilities` to `WebAssemblyTypeUtilities`.
Reviewed By: sbc100
Differential Revision: https://reviews.llvm.org/D118121
This supports bitcode compilation using `clang -fwasm-exceptions`.
---
The current situation:
Currently the backend requires two options for Wasm EH:
`-wasm-enable-eh` and `-exception-model=wasm`. Wasm SjLj requires two
options as well: `-wasm-enable-sjlj` and `-exception-model=wasm`. When
using Wasm EH via Emscripten, you only need to pass `-fwasm-exceptions`,
and these options will be added within the clang driver. This
description will focus on the case of Wasm EH going forward, but Wasm
SjLj's case is similar.
When you pass `-fwasm-exceptions` to emcc and clang driver, the clang
driver adds these options to the command line that calls the clang
frontend (`clang -cc1`): `-mllvm -wasm-enable-eh` and
`-exception-model=wasm`. `-wasm-enable-eh` is prefixed with `-mllvm`, so
it is passed as is to the backend. But `-exception-model` is parsed and
processed within the clang frontend and stored in `LangOptions` class.
This info is later transferred to `TargetOptions` class, and then
eventually passed to `MCAsmInfo` class. All LLVM code queries this
`MCAsmInfo` to get the exception model.
---
Problem:
The problem is the whole `LangOptions` processing is bypassed when
compiling bitcode, so the information transfer of `LangOptions` ->
`TargetOptions` -> `MCAsmInfo` does not happen. They are all set to
`ExceptionHandling::None`, which is the default value.
---
What other targets do, and why we can't do the same:
Other targets support bitcode compilation by the clang driver, but they
can do that by using different triples. For example, X86 target supports
multiple triples, each of which has its own subclass of `MCAsmInfo`, so
it can hardcode the appropriate exception model within those subclasses'
constructors. But we don't have separate triples for each exception
mode: none, emscripten, and wasm.
---
What this CL does:
If we can figure out whether `-wasm-enable-eh` is passed to the backend,
we can programatically set the exception model from the backend, rather
than requiring it to be passed.
So we check `WasmEnableEH` and `WasmEnableSjLj` variables, which are
`cl::opt` for `-wasm-enable-eh` and `-wasm-enable-sjlj`, in
`WebAssemblyMCAsmInfo` constructor, and if either of them is set, we set
`MCAsmInfo.ExceptionType` to Wasm. `TargetOptions` cannot be updated
there, so we make sure they are the same later.
Fixes https://github.com/emscripten-core/emscripten/issues/15712.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D115893
This patch implements a fix to recognize global symbols that represent
WebAssembly appropriately and generate the necessary .tabletype
directives.
Reviewed By: sbc100
Differential Revision: https://reviews.llvm.org/D115511
This patch implements the intrinsic for ref.null.
In the process of implementing int_wasm_ref_null_func() and
int_wasm_ref_null_extern() intrinsics, it removes the redundant
HeapType.
This also causes the textual assembler syntax for ref.null to
change. Instead of receiving an argument: `func` or `extern`, the
instruction mnemonic is either ref.null_func or ref.null_extern,
without the need for a further operand.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D114979
This change implements new DAG nodes TABLE_GET/TABLE_SET, and lowering
methods for load and stores of reference types from IR arrays. These
global LLVM IR arrays represent tables at the Wasm level.
Differential Revision: https://reviews.llvm.org/D111154
This makes Wasm EH work with dynamic linking. So far we were only able
to handle destructors, which do not use any tags or LSDA info.
1. This uses `TargetExternalSymbol` for `GCC_except_tableN` symbols,
which points to the address of per-function LSDA info. It is more
convenient to use than `MCSymbol` because it can take additional
target flags.
2. When lowering `wasm_lsda` intrinsic, if PIC is enabled, make the
symbol relative to `__memory_base` and generate the `add` node. If
PIC is disabled, continue to use the absolute address.
3. Make tag symbols (`__cpp_exception` and `__c_longjmp`) undefined in
the backend, because it is hard to make it work with dynamic
linking's loading order. Instead, we make all tag symbols undefined
in the LLVM backend and import it from JS.
4. Add support for undefined tags to the linker.
Companion patches:
- https://github.com/WebAssembly/binaryen/pull/4223
- https://github.com/emscripten-core/emscripten/pull/15266
Reviewed By: sbc100
Differential Revision: https://reviews.llvm.org/D111388
We previously had a limitation that TLS variables could not
be exported (and therefore could also not be imported). This
change removed that limitation.
Differential Revision: https://reviews.llvm.org/D108877
This CL is small, but the description can be a little long because I'm
trying to sum up the status quo for Emscripten/Wasm EH/SjLj options.
First, this CL adds an option for Wasm SjLj (`-wasm-enable-sjlj`), which
handles SjLj using Wasm EH. The implementation for this will be added as
a followup CL, but this adds the option first to do error checking.
This also adds an option for Wasm EH (`-wasm-enable-eh`), which has been
already implemented. Before we used `-exception-model=wasm` as the same
meaning as enabling Wasm EH, but after we add Wasm SjLj, it will be
possible to use Wasm EH instructions for Wasm SjLj while not enabling
EH, so going forward, to use Wasm EH, `opt` and `llc` will need this
option. This only affects `opt` and `llc` command lines and does not
affect Emscripten user interface.
Now we have two modes of EH (Emscripten/Wasm) and also two modes of SjLj
(also Emscripten/Wasm). The options corresponding to each of are:
- Emscripten EH: `-enable-emscripten-cxx-exceptions`
- Emscripten SjLj: `-enable-emscripten-sjlj`
- Wasm EH: `-wasm-enable-eh -exception-model=wasm`
`-mattr=+exception-handling`
- Wasm SjLj: `-wasm-enable-sjlj -exception-model=wasm`
`-mattr=+exception-handling`
The reason Wasm EH/SjLj's options are a little complicated are
`-exception-model` and `-mattr` are common LLVM options ane not under
our control. (`-mattr` can be omitted if it is embedded within the
bitcode file.)
And we have the following rules of the option composition:
- Emscripten EH and Wasm EH cannot be turned on at the same itme
- Emscripten SjLj and Wasm SjLj cannot be turned on at the same time
- Wasm SjLj should be used with Wasm EH
Which means we now allow these combinations:
- Emscripten EH + Emscripten SjLj: the current default in `emcc`
- Wasm EH + Emscripten SjLj:
This is allowed, but only as an interim step in which we are testing
Wasm EH but not yet have a working implementation of Wasm SjLj. This
will error out (D107687) in compile time if `setjmp` is called in a
function in which Wasm exception is used.
- Wasm EH + Wasm SjLj:
This will be the default mode later when using Wasm EH. Currently Wasm
SjLj implementation doesn't exist, so it doesn't work.
- Emscripten EH + Wasm SjLj will not work.
This CL moves these error checking routines to
`WebAssemblyPassConfig::addIRPasses`. Not sure if this is an ideal place
to do this, but I couldn't find elsewhere. Currently some checking is
done within LowerEmscriptenEHSjLj, but these checks only run if
LowerEmscriptenEHSjLj runs so it may not run when Wasm EH is used. This
moves that to `addIRPasses` and adds some more checks.
Currently LowerEmscriptenEHSjLj pass is responsible for Emscripten EH
and Emscripten SjLj. Wasm EH transformations are done in multiple
places, including WasmEHPrepare, LateEHPrepare, and CFGStackify. But in
the followup CL, LowerEmscriptenEHSjLj pass will be also responsible for
a part of Wasm SjLj transformation, because WasmSjLj will also be using
several Emscripten library functions, and we will be sharing more than
half of the transformation to do that between Emscripten SjLj and Wasm
SjLj.
Currently we have `-enable-emscripten-cxx-exceptions` and
`-enable-emscripten-sjlj` but these only work for `llc`, because for
`llc` we feed these options to the pass but when we run the pass using
`opt` the pass will be created with no options and the default options
will be used, which turns both Emscripten EH and Emscripten SjLj on.
Now we have one more SjLj option to care for, LowerEmscriptenEHSjLj pass
needs a finer way to control these options. This CL removes those
default parameters and make LowerEmscriptenEHSjLj pass read directly
from command line options specified. So if we only run
`opt -wasm-lower-em-ehsjlj`, currently both Emscripten EH and Emscripten
SjLj will run, but with this CL, none will run unless we additionally
pass `-enable-emscripten-cxx-exceptions` or `-enable-emscripten-sjlj`,
or both. This does not affect users; this only affects our `opt` tests
because `emcc` will not call either `opt` or `llc`. As a result of this,
our existing Emscripten EH/SjLj tests gained one or both of those
options in their `RUN` lines.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D107685
- Rename `wasm.catch` intrinsic to `wasm.catch.exn`, because we are
planning to add a separate `wasm.catch.longjmp` intrinsic which
returns two values.
- Rename several variables
- Remove an unnecessary parameter from `canLongjmp` and `isEmAsmCall`
from LowerEmscriptenEHSjLj pass
- Add `-verify-machineinstrs` in a test for a safety measure
- Add more comments + fix some errors in comments
- Replace `std::vector` with `SmallVector` for cases likely with small
number of elements
- Renamed `EnableEH`/`EnableSjLj` to `EnableEmEH`/`EnableEmSjLj`: We are
soon going to add `EnableWasmSjLj`, so this makes the distincion
clearer
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D107405
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D104797
This to protect against non-sensical instruction sequences being assembled,
which would either cause asserts/crashes further down, or a Wasm module being output that doesn't validate.
Unlike a validator, this type checker is able to give type-errors as part of the parsing process, which makes the assembler much friendlier to be used by humans writing manual input.
Because the MC system is single pass (instructions aren't even stored in MC format, they are directly output) the type checker has to be single pass as well, which means that from now on .globaltype and .functype decls must come before their use. An extra pass is added to Codegen to collect information for this purpose, since AsmPrinter is normally single pass / streaming as well, and would otherwise generate this information on the fly.
A `-no-type-check` flag was added to llvm-mc (and any other tools that take asm input) that surpresses type errors, as a quick escape hatch for tests that were not intended to be type correct.
This is a first version of the type checker that ignores control flow, i.e. it checks that types are correct along the linear path, but not the branch path. This will still catch most errors. Branch checking could be added in the future.
Differential Revision: https://reviews.llvm.org/D104945
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Differential Revision: https://reviews.llvm.org/D104797
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D95425
__table_base is know 64-bit, since in LLVM it represents a function pointer offset
__table_base32 is a copy in wasm32 for use in elem init expr, since no truncation may be used there.
New reloc R_WASM_TABLE_INDEX_REL_SLEB64 added
Differential Revision: https://reviews.llvm.org/D101784
As we have been missing support for WebAssembly globals on the IR level,
the lowering of WASM_SYMBOL_TYPE_GLOBAL to IR was incomplete. This
commit fleshes out the lowering support, lowering references to and
definitions of addrspace(1) values to correctly typed
WASM_SYMBOL_TYPE_GLOBAL symbols.
Depends on D101608.
Differential Revision: https://reviews.llvm.org/D101913
This CL
1. Creates Utils/ directory under lib/Target/WebAssembly
2. Moves existing WebAssemblyUtilities.cpp|h into the Utils/ directory
3. Creates Utils/WebAssemblyTypeUtilities.cpp|h and put type
declarataions and type conversion functions scattered in various
places into this single place.
It has been suggested several times that it is not easy to share utility
functions between subdirectories (AsmParser, DIsassembler, MCTargetDesc,
...). Sometimes we ended up [[ https://reviews.llvm.org/D92840#2478863 | duplicating ]] the same function because of
this.
There are already other targets doing this: AArch64, AMDGPU, and ARM
have Utils/ subdirectory under their target directory.
This extracts the utility functions into a single directory Utils/ and
make them sharable among all passes in WebAssembly/ and its
subdirectories. Also I believe gathering all type-related conversion
functionalities into a single place makes it more usable. (Actually I
was working on another CL that uses various type conversion functions
scattered in multiple places, which became the motivation for this CL.)
Reviewed By: dschuff, aardappel
Differential Revision: https://reviews.llvm.org/D100995
If the reference-types feature is enabled, call_indirect will explicitly
reference its corresponding function table via TABLE_NUMBER
relocations against a table symbol.
Also, as before, address-taken functions can also cause the function
table to be created, only with reference-types they additionally cause a
symbol table entry to be emitted.
Differential Revision: https://reviews.llvm.org/D90948
If the reference-types feature is enabled, call_indirect will explicitly
reference its corresponding function table via `TABLE_NUMBER`
relocations against a table symbol.
Also, as before, address-taken functions can also cause the function
table to be created, only with reference-types they additionally cause a
symbol table entry to be emitted.
We abuse the used-in-reloc flag on symbols to indicate which tables
should end up in the symbol table. We do this because unfortunately
older wasm-ld will carp if it see a table symbol.
Differential Revision: https://reviews.llvm.org/D90948
As mentioned in TODO comment, casting double to float causes NaNs to change bits.
To avoid the change, this patch adds support for single-floating-point immediate value on MachineCode.
Patch by Yuta Saito.
Differential Revision: https://reviews.llvm.org/D77384
This reverts commit 418df4a6ab35d343cc0f2608c90a73dd9b8d0ab1.
This change broke emscripten tests, I believe because it started
generating 5-byte a wide table index in the call_indirect instruction.
Neither v8 nor wabt seem to be able to handle that. The spec
currently says that this is single 0x0 byte and:
"In future versions of WebAssembly, the zero byte occurring in the
encoding of the call_indirectcall_indirect instruction may be used to
index additional tables."
So we need to revisit this change. For backwards compat I guess
we need to guarantee that __indirect_function_table is always at
address zero. We could also consider making this a single-byte
relocation with and assert if have more than 127 tables (for now).
Differential Revision: https://reviews.llvm.org/D95005
This patch changes to make call_indirect explicitly refer to the
corresponding function table, residualizing TABLE_NUMBER relocs against
it.
With this change, wasm-ld now sees all references to tables, and can
link multiple tables.
Differential Revision: https://reviews.llvm.org/D90948
These relocations represent offsets from the __tls_base symbol.
Previously we were just using normal MEMORY_ADDR relocations and relying
on the linker to select a segment-offset rather and absolute value in
Symbol::getVirtualAddress(). Using an explicit relocation type allows
allow us to clearly distinguish absolute from relative relocations based
on the relocation information alone.
One place this is useful is being able to reject absolute relocation in
the PIC case, but still accept TLS relocations.
Differential Revision: https://reviews.llvm.org/D91276
This patch adds a new "heap type" operand kind to the WebAssembly MC
layer, used by ref.null. Currently the possible values are "extern" and
"func"; when typed function references come, though, this operand may be
a type index.
Note that the "heap type" production is still known as "refedtype" in
the draft proposal; changing its name in the spec is
ongoing (https://github.com/WebAssembly/reference-types/issues/123).
The register form of ref.null is still untested.
Differential Revision: https://reviews.llvm.org/D90608
Renaming for some Emscripten EH functions has so far been done in
wasm-emscripten-finalize tool in Binaryen. But recently we decided to
make a compilation/linking path that does not rely on
wasm-emscripten-finalize for modifications, so here we move that
functionality to LLVM.
Invoke wrappers are generated in LowerEmscriptenEHSjLj pass, but final
wasm types are not available in the IR pass, we need to rename them at
the end of the pipeline.
This patch also removes uses of `emscripten_longjmp_jmpbuf` in
LowerEmscriptenEHSjLj pass, replacing that with `emscripten_longjmp`.
`emscripten_longjmp_jmpbuf` is lowered to `emscripten_longjmp`, but
previously we generated calls to `emscripten_longjmp_jmpbuf` in
LowerEmscriptenEHSjLj pass because it takes `jmp_buf*` instead of `i32`.
But we were able use `ptrtoint` to make it use `emscripten_longjmp`
directly here.
Addresses:
https://github.com/WebAssembly/binaryen/issues/3043https://github.com/WebAssembly/binaryen/issues/3081
Companions:
https://github.com/WebAssembly/binaryen/pull/3191https://github.com/emscripten-core/emscripten/pull/12399
Reviewed By: dschuff, tlively, sbc100
Differential Revision: https://reviews.llvm.org/D88697
This adds 4 new reloc types.
A lot of code that previously assumed any memory or offset values could be contained in a uint32_t (and often truncated results from functions returning 64-bit values) have been upgraded to uint64_t. This is not comprehensive: it is only the values that come in contact with the new relocation values and their dependents.
A new tablegen mapping was added to automatically upgrade loads/stores in the assembler, which otherwise has no way to select for these instructions (since they are indentical other than for the offset immediate). It follows a similar technique to https://reviews.llvm.org/D53307
Differential Revision: https://reviews.llvm.org/D81704
Summary:
Swift ABI is based on basic C ABI described here https://github.com/WebAssembly/tool-conventions/blob/master/BasicCABI.md
Swift Calling Convention on WebAssembly is a little deffer from swiftcc
on another architectures.
On non WebAssembly arch, swiftcc accepts extra parameters that are
attributed with swifterror or swiftself by caller. Even if callee
doesn't have these parameters, the invocation succeed ignoring extra
parameters.
But WebAssembly strictly checks that callee and caller signatures are
same. https://github.com/WebAssembly/design/blob/master/Semantics.md#calls
So at WebAssembly level, all swiftcc functions end up extra arguments
and all function definitions and invocations explicitly have additional
parameters to fill swifterror and swiftself.
This patch support signature difference for swiftself and swifterror cc
is swiftcc.
e.g.
```
declare swiftcc void @foo(i32, i32)
@data = global i8* bitcast (void (i32, i32)* @foo to i8*)
define swiftcc void @bar() {
%1 = load i8*, i8** @data
%2 = bitcast i8* %1 to void (i32, i32, i32)*
call swiftcc void %2(i32 1, i32 2, i32 swiftself 3)
ret void
}
```
For swiftcc, emit additional swiftself and swifterror parameters
if there aren't while lowering. These additional parameters are added
for both callee and caller.
They are necessary to match callee and caller signature for direct and
indirect function call.
Differential Revision: https://reviews.llvm.org/D76049
Summary:
Extends the multivalue call infrastructure to tail calls, removes all
legacy calls specialized for particular result types, and removes the
CallIndirectFixup pass, since all indirect call arguments are now
fixed up directly in the post-insertion hook.
In order to keep supporting pretty-printed defs and uses in test
expectations, MCInstLower now inserts an immediate containing the
number of defs for each call and call_indirect. The InstPrinter is
updated to query this immediate if it is present and determine which
MCOperands are defs and uses accordingly.
Depends on D72902.
Reviewers: aheejin
Subscribers: dschuff, mgorny, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74192
Summary:
Unlike normal calls, call_indirects have immediate arguments that
caused a MachineVerifier failure without a small tweak to loosen the
verifier's requirements for variadicOpsAreDefs instructions.
One nice thing about the new call_indirects is that they do not need
to participate in the PCALL_INDIRECT mechanism because their post-isel
hook handles moving the function pointer argument and adding the flags
and typeindex arguments itself.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74191
Summary:
Renames `ExprType` to the more apt `BlockType` and adds a variant for
multivalue blocks. Currently non-void blocks are only generated at the
end of functions where the block return type needs to agree with the
function return type, and that remains true for multivalue
blocks. That invariant means that the actual signature does not need
to be stored in the block signature `MachineOperand` because it can be
inferred by `WebAssemblyMCInstLower` from the return type of the
parent function. `WebAssemblyMCInstLower` continues to lower block
signature operands to immediates when possible but lowers multivalue
signatures to function type symbols. The AsmParser and Disassembler
are updated to handle multivalue block types as well.
Reviewers: aheejin, dschuff, aardappel
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68889
llvm-svn: 374933
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
return_call and return_call_indirect are only valid if the return
types of the callee and caller match. We were previously not enforcing
that, which was producing invalid modules.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65246
llvm-svn: 367339
Summary:
Add immutable WASM global `__tls_align` which stores the alignment
requirements of the TLS segment.
Add `__builtin_wasm_tls_align()` intrinsic to get this alignment in Clang.
The expected usage has now changed to:
__wasm_init_tls(memalign(__builtin_wasm_tls_align(),
__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, sbc100, sunfish, alexcrichton
Reviewed By: tlively
Subscribers: dschuff, jgravelle-google, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65028
llvm-svn: 366624
Summary:
Thread local variables are placed inside a `.tdata` segment. Their symbols are
offsets from the start of the segment. The address of a thread local variable
is computed as `__tls_base` + the offset from the start of the segment.
`.tdata` segment is a passive segment and `memory.init` is used once per thread
to initialize the thread local storage.
`__tls_base` is a wasm global. Since each thread has its own wasm instance,
it is effectively thread local. Currently, `__tls_base` must be initialized
at thread startup, and so cannot be used with dynamic libraries.
`__tls_base` is to be initialized with a new linker-synthesized function,
`__wasm_init_tls`, which takes as an argument a block of memory to use as the
storage for thread locals. It then initializes the block of memory and sets
`__tls_base`. As `__wasm_init_tls` will handle the memory initialization,
the memory does not have to be zeroed.
To help allocating memory for thread-local storage, a new compiler intrinsic
is introduced: `__builtin_wasm_tls_size()`. This instrinsic function returns
the size of the thread-local storage for the current function.
The expected usage is to run something like the following upon thread startup:
__wasm_init_tls(malloc(__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, kripken, sbc100
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, jfb, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64537
llvm-svn: 366272
Summary:
Most of these functions can work for MachineInstr and MCInst
equally now.
Reviewers: dschuff
Subscribers: MatzeB, sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64643
llvm-svn: 365965
This change is in preparation for the addition of new target
operand flags for new relocation types. Have a symbol type as part
of the flag set makes it harder to use and AFAICT these are serving
no purpose.
Differential Revision: https://reviews.llvm.org/D60014
llvm-svn: 357548
