This patch implements limited loop vectorization support for the 'all-in-one' histogram intrinsic. The feature is disabled by default, and when enabled will only vectorize if there are no other users of values in the gather-modify-scatter sequence.
This is a helper to avoid writing `getModule()->getDataLayout()`. I
regularly try to use this method only to remember it doesn't exist...
`getModule()->getDataLayout()` is also a common (the most common?)
reason why code has to include the Module.h header.
Instead of passing LoopAccessInfo only to fetch the MemoryDepChecker,
directly pass MemoryDepChecker. This simplifies the code and also allows
new uses in places where no LAI is available.
Extend LoopAccessAnalysis to support different strides and as a
consequence non-constant distances between dependences using SCEV to
reason about the direction of the dependence.
In multiple places, logic to rule out dependences using the stride has
been updated to only be used if StrideA == StrideB, i.e. there's a
common stride.
We now also may bail out at multiple places where we may have to set
FoundNonConstantDistanceDependence. This is done when we need to bail
out and the distance is not constant to preserve original behavior.
Fixes https://github.com/llvm/llvm-project/issues/87336
PR: https://github.com/llvm/llvm-project/pull/88039
As part of the RemoveDIs project we need LLVM to insert instructions using
iterators wherever possible, so that the iterators can carry a bit of
debug-info. This commit implements some of that by updating the contents of
llvm/lib/Transforms/Utils to always use iterator-versions of instruction
constructors.
There are two general flavours of update:
* Almost all call-sites just call getIterator on an instruction
* Several make use of an existing iterator (scenarios where the code is
actually significant for debug-info)
The underlying logic is that any call to getFirstInsertionPt or similar
APIs that identify the start of a block need to have that iterator passed
directly to the insertion function, without being converted to a bare
Instruction pointer along the way.
Noteworthy changes:
* FindInsertedValue now takes an optional iterator rather than an
instruction pointer, as we need to always insert with iterators,
* I've added a few iterator-taking versions of some value-tracking and
DomTree methods -- they just unwrap the iterator. These are purely
convenience methods to avoid extra syntax in some passes.
* A few calls to getNextNode become std::next instead (to keep in the
theme of using iterators for positions),
* SeparateConstOffsetFromGEP has it's insertion-position field changed.
Noteworthy because it's not a purely localised spelling change.
All this should be NFC.
This patch adds a new dependence kind UnsafeIndirect, for cases where at
least one of the memory access instructions may access a loop varying object,
e.g. the address of underlying object is loaded inside the loop, like A[B[i]].
We cannot determine direction or distance in those cases, and also are unable
to generate any runtime checks.
This fixes a miscompile, if we attempt to generate runtime checks for
unknown dependencies.
Note that in most cases we do not attempt to generate runtime checks for
unknown dependences, except if FoundNonConstantDistanceDependence is
true.
Fixes https://github.com/llvm/llvm-project/issues/69744.
Continuing the patch series to get rid of debug intrinsics [0], instruction
insertion needs to be done with iterators rather than instruction pointers,
so that we can communicate information in the iterator class. This patch
adds an iterator-taking insertBefore method and converts various call sites
to take iterators. These are all sites where such debug-info needs to be
preserved so that a stage2 clang can be built identically; it's likely that
many more will need to be changed in the future.
At this stage, this is just changing the spelling of a few operations,
which will eventually become signifiant once the debug-info bearing
iterator is used.
[0] https://discourse.llvm.org/t/rfc-instruction-api-changes-needed-to-eliminate-debug-intrinsics-from-ir/68939
Differential Revision: https://reviews.llvm.org/D152537
This patch allows us to gain all the benefits provided by
LoopLoadElimination pass to descending loops.
Differential Revision: https://reviews.llvm.org/D151448
Loop versioning changes the control-flow, which may impact SCEVs cached
by for other loops in LoopAccessInfoManager. Clear the manager after
making changes.
Fixes#57825.
Depends on D134609.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D134611
Use LoopAccessInfoManager directly instead of various GetLAA lambdas.
Depends on D134608.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D134609
At the moment, LoopAccessAnalysis is a loop analysis for the new pass
manager. The issue with that is that LAI caches SCEV expressions and
modifications in a loop may impact SCEV expressions in other loops, but
we do not have a convenient way to invalidate LAI for other loops
withing a loop pipeline.
To avoid this issue, turn it into a function analysis which returns a
manager object that keeps track of the individual LAI objects per loop.
Fixes#50940.
Fixes#51669.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D134606
This is purely NFC restructure in advance of a change which actually exposes zero strides. This is mostly because I find this interface confusing each time I look at it.
We are not building up a proper list of load-store candidates because
we are throwing away stores where the type don't match the load.
This patch adds stores with matching store sizes as candidates.
Author of the original patch: David Sherwood.
Differential Revision: https://reviews.llvm.org/D130233
Similar to c515b2f39e77, If there are no loops in the function as seen
through LI, we should avoid computing the remaining expensive analyses
(such as SCEV, BPI). Reordered the analyses requests and early return
if there are no loops.
The logic of avoiding expensive analyses is applied to LoopVectorizer,
LoopLoadElimination and LoopUnrollPass, i.e. all function passes which operate
on loops.
This is an NFC with compile time improvement.
Differential Revision: https://reviews.llvm.org/D124529
Note that this doesn't actually cause the top level predicate to become a non-union just yet.
The * above comes from a case in the LoopVectorizer where a predicate which is later proven no longer blocks vectorization due to a change from checking if predicates exists to whether the predicate is possibly false.
With typed pointers the pointer operand type checks the address space
and the load/store type. With opaque pointers we have to check the
load/store type separately.
This is analogous to D86156 (which preserves "lossy" BFI in loop
passes). Lossy means that the analysis preserved may not be up to date
with regards to new blocks that are added in loop passes, but BPI will
not contain stale pointers to basic blocks that are deleted by the loop
passes.
This is achieved through BasicBlockCallbackVH in BPI, which calls
eraseBlock that updates the data structures in BPI whenever a basic
block is deleted.
This patch does not have any changes in the upstream pipeline, since
none of the loop passes in the pipeline use BPI currently.
However, since BPI wasn't previously preserved in loop passes, the loop
predication pass was invoking BPI *on the entire
function* every time it ran in an LPM. This caused massive compile time
in our downstream LPM invocation which contained loop predication.
See updated test with an invocation of a loop-pipeline containing loop
predication and -debug-pass turned ON.
Reviewed-By: asbirlea, modimo
Differential Revision: https://reviews.llvm.org/D110438
Pass the access type to getPtrStride(), so it is not determined
from the pointer element type. Many cases still fetch the element
type at a higher level though, so this only partially addresses
the issue.
LoopLoadElimination, LoopVersioning and LoopVectorize currently
fetch MemorySSA when construction LoopAccessAnalysis. However,
LoopAccessAnalysis does not actually use MemorySSA and we can pass
nullptr instead.
This saves one MemorySSA calculation in the default pipeline, and
thus improves compile-time.
Differential Revision: https://reviews.llvm.org/D108074
Loop canonicalization may end up deleting blocks from CFG. And
Scalar Evolution may still keep cached referenced to those blocks
unless updated properly.
his is a preparation patch for supporting multiple exits in the loop vectorizer, by itself it should be mostly NFC. This patch moves the loop structure checks from LAA to their respective consumers (where duplicates don't already exist). Moving the checks does end up changing some of the optimization warnings and debug output slightly, but nothing that appears to be a regression.
Why do this? Well, after auditing the code, I can't actually find anything in LAA itself which relies on having all instructions within a loop execute an equal number of times. This patch simply makes this explicit so that if one consumer - say LV in the near future (hopefully) - wants to handle a broader class of loops, it can do so.
Differential Revision: https://reviews.llvm.org/D92066
LoopLoadElim may end up expanding an AddRec from a loop
which is not the current loop. This loop may not be in simplify
form. We figure it out after the no-return point, so cannot bail
in this case.
AddRec requires simplify form to expand. The only way to ensure
this does not crash is to simplify all loops beforehand.
The issue only exists in new PM. Old PM requests LoopSimplify
required pass and it simplifies all loops before the opt begins.
Differential Revision: https://reviews.llvm.org/D91525
Reviewed By: asbirlea, aeubanks
This is an initial cleanup of the way LoopVersioning interacts with LAA.
Currently LoopVersioning has 2 ways of initializing things:
1. Passing LAI and passing UseLAIChecks = true
2. Passing UseLAIChecks = false, followed by calling setSCEVChecks and
setAliasChecks.
Both ways of initializing lead to the same result and the duplication
seems more complicated than necessary.
This patch removes the UseLAIChecks flag from the constructor and the
setSCEVChecks & setAliasChecks helpers and move initialization
exclusively to the constructor.
This simplifies things, by providing a single way to initialize
LoopVersioning and reducing duplication.
Reviewed By: Meinersbur, lebedev.ri
Differential Revision: https://reviews.llvm.org/D84406
~~D65060 uncovered that trying to use BFI in loop passes can lead to non-deterministic behavior when blocks are re-used while retaining old BFI data.~~
~~To make sure BFI is preserved through loop passes a Value Handle (VH) callback is registered on blocks themselves. When a block is freed it now also wipes out the accompanying BFI entry such that stale BFI data can no longer persist resolving the determinism issue. ~~
~~An optimistic approach would be to incrementally update BFI information throughout the loop passes rather than only invalidating them on removed blocks. The issues with that are:~~
~~1. It is not clear how BFI information should be incrementally updated: If a block is duplicated does its BFI information come with? How about if it's split/modified/moved around? ~~
~~2. Assuming we can address these problems the implementation here will be a massive undertaking. ~~
~~There's a known need of BFI in LICM analysis which requires correct but not incrementally updated BFI data. A follow-up change can register BFI in all loop passes so this preserved but potentially lossy data is available to any loop pass that wants it.~~
See: D75341 for an identical implementation of preserving BFI via VH callbacks. The previous statements do still apply but this change no longer has to be in this diff because it's already upstream 😄 .
This diff also moves BFI to be a part of LoopStandardAnalysisResults since the previous method using getCachedResults now (correctly!) statically asserts (D72893) that this data isn't static through the loop passes.
Testing
Ninja check
Reviewed By: asbirlea, nikic
Differential Revision: https://reviews.llvm.org/D86156
The test in PR47457 demonstrates a situation when candidate load's pointer's SCEV
is no loger a SCEVAddRec after loop versioning. The code there assumes that it is
always a SCEVAddRec and crashes otherwise.
This patch makes sure that we do not consider candidates for which this requirement
is broken after the versioning.
Differential Revision: https://reviews.llvm.org/D87355
Reviewed By: asbirlea
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
This patch was originally committed as b8a3c34eee06, but broke the
modules build, as LoopAccessAnalysis was using the Expander.
The code-gen part of LAA was moved to lib/Transforms recently, so this
patch can be landed again.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
Summary:
Analyses that are statefull should not be retrieved through a proxy from
an outer IR unit, as these analyses are only invalidated at the end of
the inner IR unit manager.
This patch disallows getting the outer manager and provides an API to
get a cached analysis through the proxy. If the analysis is not
stateless, the call to getCachedResult will assert.
Reviewers: chandlerc
Subscribers: mehdi_amini, eraman, hiraditya, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72893
This allows forward declarations of PointerCheck, which in turn reduce
the number of times LoopAccessAnalysis needs to be included.
Ultimately this helps with moving runtime check generation to
Transforms/Utils/LoopUtils.h, without having to include it there.
Reviewers: anemet, Ayal
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D78458
Loop simplify form should always be checked because logic of
propagateStoredValueToLoadUsers relies on it (in particular, it
requires preheader).
Reviewed By: Fedor Sergeev, Florian Hahn
Differential Revision: https://reviews.llvm.org/D77775
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
Summary:
In case of a need to distinguish different query sites for gradual commit or
debugging of PGSO. NFC.
Reviewers: davidxl
Subscribers: hiraditya, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70510
