Use hexadecimal numbers rather than decimal in various vFile packets
in order to fix compatibility with gdbserver. This also changes the few
custom LLDB packets -- while technically they do not have to be changed,
it is easier to use the same syntax consistently across LLDB.
Differential Revision: https://reviews.llvm.org/D107475
Sync the mode constants used to drive vFile:open requests with these
used by GDB and defined for the gdb remote protocol. This makes it
possible to use 'platform file open' after connecting to gdbremote
server (and to some degree to operate on the open file modulo other
incompatibilities).
Differential Revision: https://reviews.llvm.org/D106985
Following tests fail on Arm/AArch64 randomly with timeouts:
TestMultilineNavigation.py
TestBatchMode.py
TestUnicode.py
TestGdbRemote_vContThreads.py
I am marking them as skipped until we find a away make to pass reliably.
Upstream support for NSConstantArray, NSConstantIntegerNumber,
NSConstant{Float,Double}Number and NSConstantDictionary.
We would've upstreamed this earlier but testing it requires
-fno-constant-nsnumber-literals, -fno-constant-nsarray-literals and
-fno-constant-nsdictionary-literals which haven't been upstreamed yet.
As a temporary workaround use the system compiler (xcrun clang) for the
constant variant of the tests.
I'm just upstreaming this. The patch and the tests were all authored by
Fred Riss.
Differential revision: https://reviews.llvm.org/D107660
This reverts commit 34d78b6a6755946e547afc47d38b59b6a2854457.
This breaks build bots witha missing file:
/home/worker/2.0.1/lldb-x86_64-debian/llvm-project/lldb/source/Plugins/Language/ObjC/Cocoa.cpp:10:10: fatal error: 'objc/runtime.h' file not found
Upstream support for NSConstantArray, NSConstantIntegerNumber,
NSConstant{Float,Double}Number and NSConstantDictionary.
We would've upstreamed this earlier but testing it requires
-fno-constant-nsnumber-literals, -fno-constant-nsarray-literals and
-fno-constant-nsdictionary-literals which haven't been upstreamed yet.
As a temporary workaround use the system compiler (xcrun clang) for the
constant variant of the tests.
I'm just upstreaming this. The patch and the tests were all authored by
Fred Riss.
Differential revision: https://reviews.llvm.org/D107660
This provides a convenient way to limit a breakpoint
to the current thread when setting it from the command line w/o
having to figure out what the current thread is.
Differential Revision: https://reviews.llvm.org/D107015
Following LLDB tests fail randomly on LLDB Arm/AArch64 Linux buildbots.
We still not have a reliable solution for these tests to pass
consistently. I am marking them skipped for now.
TestBreakpointCallbackCommandSource.py
TestIOHandlerResize.py
TestEditline.py
TestGuiViewLarge.py
TestGuiExpandThreadsTree.py
TestGuiBreakpoints.py
Summary:
In the spirit of https://reviews.llvm.org/D70846, we only return functions with
matching mangled name from Apple/DebugNamesDWARFIndex::GetFunction if
eFunctionNameTypeFull is requested.
This speeds up lookup in the presence of large amount of class methods of the
same name (a typical examples would be constructors of templates with many
instantiations or overloaded operators).
Reviewers: labath, teemperor
Reviewed By: labath, teemperor
Subscribers: aprantl, arphaman, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73191
VScode now sends a "scopes" DAP request immediately after any expression evaluation.
This scopes request would clear and invalidate any non-scoped expandable variables in g_vsc.variables, causing later "variables" request to return empty result.
The symptom is that any expandable variables in VScode watch window/debug console UI to return empty content.
This diff fixes this issue by only clearing the expandable variables at process continue time. To achieve this, we have to repopulate all scoped variables
during context switch for each "scopes" request without clearing global expandable variables.
So the PR puts the scoped variables into its own locals/globals/registers; and all expandable variables into separate "expandableVariables" list.
Also, instead of using the variable index for "variableReference", it generates a new variableReference id each time as the key of "expandableVariables".
As a further new feature, this PR adds a new "expandablePermanentVariables" which has the lifetime of debug session. Any expandable variables from debug console
are added into this list. This enables users to snapshot expanable old variable in debug console and compare with new variables if desire.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D105166
The comment was originally added in 34769d80d. Then D44526
removed the flag added there (but kept the comment), and then
D66966 reintroduced a .noindex dir (which D68606 and then 33fca97880
moved around a bit).
No behavior change.
Differential Revision: https://reviews.llvm.org/D107341
This reverts commit fd18f0e84cca023df6cb19e88c07c0e2059f659b.
I reverted this change to see its effect on failing GUI tests on LLDB
Arm/AArch64 Linux buildbots. I could not find any evidence against this
particular change so reverting it back.
Differential Revision: https://reviews.llvm.org/D100243
Following tests have been failing randomly on LLDB Arm and AArch64 Linux
builtbots:
TestMultilineNavigation.py
TestMultilineCompletion.py
TestIOHandlerCompletion.py
TestGuiBasic.py
I have increased allocated CPU resources to these bots but it has not
improved situation to an acceptable level. This patch marks them as
skipped on Arm/AArch64 for now.
The "memory tag read" command will now tell you
when the allocation tag read does not match the logical
tag.
(lldb) memory tag read mte_buf+(8*16) mte_buf+(8*16)+48
Logical tag: 0x9
Allocation tags:
[0xfffff7ff7080, 0xfffff7ff7090): 0x8 (mismatch)
[0xfffff7ff7090, 0xfffff7ff70a0): 0x9
[0xfffff7ff70a0, 0xfffff7ff70b0): 0xa (mismatch)
The logical tag will be taken from the start address
so the end could have a different tag. You could for example
read from ptr_to_array_1 to ptr_to_array_2. Where the latter
is tagged differently to prevent buffer overflow.
The existing command will read 1 granule if you leave
off the end address. So you can also use it as a quick way
to check a single location.
(lldb) memory tag read mte_buf
Logical tag: 0x9
Allocation tags:
[0xfffff7ff7000, 0xfffff7ff7010): 0x0 (mismatch)
This avoids the need for a seperate "memory tag check" command.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D106880
The type field is a signed integer.
(https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html)
However it's not packed in the packet in the way
you might think. For example the type -1 should be:
qMemTags:<addr>,<len>:ffffffff
Instead of:
qMemTags:<addr>,<len>:-1
This change makes lldb-server's parsing more strict
and adds more tests to check that we handle negative types
correctly in lldb and lldb-server.
We only support one tag type value at this point,
for AArch64 MTE, which is positive. So this doesn't change
any of those interactions. It just brings us in line with GDB.
Also check that the test target has MTE. Previously
we just checked that we were AArch64 with a toolchain
that supports MTE.
Finally, update the tag type check for QMemTags to use
the same conversion steps that qMemTags now does.
Using static_cast can invoke UB and though we do do a limit
check to avoid this, I think it's clearer with the new method.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D104914
This reverts commit fed25ddc1c3de59aa1de27e95b349f86896ccb79.
There has been sporadic failures in LLDB AArch64/Arm 32 buildbots since
this commit. I am temporarily reverting it see if it fixes the issue.
Differential Revision: https://reviews.llvm.org/D100243
https://reviews.llvm.org/D45592 added a nice feature to be able to specify a breakpoint by a relative path. E.g. passing foo.cpp or bar/foo.cpp or zaz/bar/foo.cpp is fine. However, https://reviews.llvm.org/D68671 by mistake disabled the test that ensured this functionality works. With time, someone made a small mistake and fully broke the functionality.
So, I'm making a very simple fix and the test passes.
Differential Revision: https://reviews.llvm.org/D107126
In the latest Linux kernels synchronous tag faults
include the tag bits in their address.
This change adds logical and allocation tags to the
description of synchronous tag faults.
(asynchronous faults have no address)
Process 1626 stopped
* thread #1, name = 'a.out', stop reason = signal SIGSEGV: sync tag check fault (fault address: 0x900fffff7ff9010 logical tag: 0x9 allocation tag: 0x0)
This extends the existing description and will
show as much as it can on the rare occasion something
fails.
This change supports AArch64 MTE only but other
architectures could be added by extending the
switch at the start of AnnotateSyncTagCheckFault.
The rest of the function is generic code.
Tests have been added for synchronous and asynchronous
MTE faults.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105178
This diff introduces Hierarchical Trace Representation (HTR) and creates the `thread trace export ctf -f <filename> -t <thread_id>` command to export an Intel PT trace's HTR to Chrome Trace Format (CTF) for visualization.
See `lldb/docs/htr.rst` for context/documentation on HTR.
**Overview of Changes**
- Add HTR documentation (see `lldb/docs/htr.rst`)
- Add HTR structures (layer, block, block metadata)
- Implement "Basic Super Block" HTR pass
- Add 'thread trace export ctf' command to export the HTR of an Intel PT
trace to Chrome Trace Format (CTF)
As this diff is the first iteration of HTR and trace visualization, future diffs will build on this work by generalizing the internal design of HTR and implementing new HTR passes that provide better trace summarization/visualization.
See attached video for an example of Intel PT trace visualization:
{F17851042}
Original Author: jj10306
Submitted by: wallace
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D105741
This diff introduces Hierarchical Trace Representation (HTR) and creates the `thread trace export ctf -f <filename> -t <thread_id>` command to export an Intel PT trace's HTR to Chrome Trace Format (CTF) for visualization.
See `lldb/docs/htr.rst` for context/documentation on HTR.
**Overview of Changes**
- Add HTR documentation (see `lldb/docs/htr.rst`)
- Add HTR structures (layer, block, block metadata)
- Implement "Basic Super Block" HTR pass
- Add 'thread trace export ctf' command to export the HTR of an Intel PT
trace to Chrome Trace Format (CTF)
As this diff is the first iteration of HTR and trace visualization, future diffs will build on this work by generalizing the internal design of HTR and implementing new HTR passes that provide better trace summarization/visualization.
See attached video for an example of Intel PT trace visualization:
{F17851042}
Original Author: jj10306
Submitted by: wallace
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D105741
The default mode of "memory tag write" is to calculate the
range from the start address and the number of tags given.
(just like "memory write" does)
(lldb) memory tag write mte_buf 1 2
(lldb) memory tag read mte_buf mte_buf+48
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
[0xfffff7ff9020, 0xfffff7ff9030): 0x0
This new option allows you to set an end address and have
the tags repeat until that point.
(lldb) memory tag write mte_buf 1 2 --end-addr mte_buf+64
(lldb) memory tag read mte_buf mte_buf+80
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
[0xfffff7ff9020, 0xfffff7ff9030): 0x1
[0xfffff7ff9030, 0xfffff7ff9040): 0x2
[0xfffff7ff9040, 0xfffff7ff9050): 0x0
This is implemented using the QMemTags packet previously
added. We skip validating the number of tags in lldb and send
them on to lldb-server, which repeats them as needed.
Apart from the number of tags, all the other client side checks
remain. Tag values, memory range must be tagged, etc.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105183
TestGuiBasicDebug.py randomly fails due to timeouts sending out false
negatives on LLDB Arm and AArch64 Linux buildbots. I havnt found a
reliable wayy to set pexpect timeout for this test to pass regularly.
Skipping it on Arm and AArch64 Linux to silence buildbot failures.
This adds a new command for writing memory tags.
It is based on the existing "memory write" command.
Syntax: memory tag write <address-expression> <value> [<value> [...]]
(where "value" is a tag value)
(lldb) memory tag write mte_buf 1 2
(lldb) memory tag read mte_buf mte_buf+32
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
The range you are writing to will be calculated by
aligning the address down to a granule boundary then
adding as many granules as there are tags.
(a repeating mode with an end address will be in a follow
up patch)
This is why "memory tag write" uses MakeTaggedRange but has
some extra steps to get this specific behaviour.
The command does all the usual argument validation:
* Address must evaluate
* You must supply at least one tag value
(though lldb-server would just treat that as a nop anyway)
* Those tag values must be valid for your tagging scheme
(e.g. for MTE the value must be > 0 and < 0xf)
* The calculated range must be memory tagged
That last error will show you the final range, not just
the start address you gave the command.
(lldb) memory tag write mte_buf_2+page_size-16 6
(lldb) memory tag write mte_buf_2+page_size-16 6 7
error: Address range 0xfffff7ffaff0:0xfffff7ffb010 is not in a memory tagged region
(note that we do not check if the region is writeable
since lldb can write to it anyway)
The read and write tag tests have been merged into
a single set of "tag access" tests as their test programs would
have been almost identical.
(also I have renamed some of the buffers to better
show what each one is used for)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105182
The old code incorrectly calculated the start position for the search
for the third (and subsequent) instance of a particular substitution
pattern (e.g. %1).
I also added a few test cases for this parsing covering this failure.
The code that figured out which breakpoints to delete was supposed
to set the result status if it found breakpoints, and then the code
that actually deleted them checked that the result's status was set.
The code for "break delete --disabled" failed to set the status if
no "protected" breakpoints were provided. This was a confusing way
to implement this, so I reworked it with early returns so it was less
error prone, and added a test case for the no arguments case.
Differential Revision: https://reviews.llvm.org/D106623
This is implemented using the QMemTags packet, as specified
by GDB in:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(recall that qMemTags was previously added to read tags)
On receipt of a valid packet lldb-server will:
* align the given address and length to granules
(most of the time lldb will have already done this
but the specification doesn't guarantee it)
* Repeat the supplied tags as many times as needed to cover
the range. (if tags > range we just use as many as needed)
* Call ptrace POKEMTETAGS to write the tags.
The ptrace step will loop just like the tag read does,
until all tags are written or we get an error.
Meaning that if ptrace succeeds it could be a partial write.
So we call it again and if we then get an error, return an error to
lldb.
We are not going to attempt to restore tags after a partial
write followed by an error. This matches the behaviour of the
existing memory writes.
The lldb-server tests have been extended to include read and
write in the same test file. With some updated function names
since "qMemTags" vs "QMemTags" isn't very clear when they're
next to each other.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105180
This patch expands the tree item that corresponds to the selected thread
by default in the Threads window. Additionally, the tree root item is
always expanded, which is the process in the Threads window.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D100243
D104406 introduced an error in which, if there are multiple matchings rules for a given path, lldb was only checking for the validity in the filesystem of the first match instead of looking exhaustively one by one until a valid file is found.
Besides that, a call to consume_front was being done incorrectly, as it was modifying the input, which renders subsequent matches incorrect.
I added a test that checks for both cases.
Differential Revision: https://reviews.llvm.org/D106723
Code was added to Target::RunStopHook to make sure that we don't run stop hooks when
you stop after an expression evaluation. But the way it was done was to check that we
hadn't run an expression since the last natural stop. That failed in the case where you
stopped for a breakpoint which had run an expression, because the stop-hooks get run
after the breakpoint actions, and so by the time we got to running the stop-hooks,
we had already run a user expression.
I fixed this by adding a target ivar tracking the last natural stop ID at which we had
run a stop-hook. Then we keep track of this and make sure we run the stop-hooks only
once per natural stop.
Differential Revision: https://reviews.llvm.org/D106514
D105471 fixes the way we assign sizes to empty structs in C mode. Instead of
just giving them a size 0, we instead use the size we get from DWARF if possible.
After landing D105471 the TestStructTypes test started failing on Windows. The
tests checked that the size of an empty C struct is 0 while the size LLDB now
reports is 4 bytes. It turns out that 4 bytes are the actual size Clang is using
for C structs with the MicrosoftRecordLayoutBuilder. The commit that introduced
that behaviour is 00a061dccc6671c96412d7b28ab2012963208579.
This patch removes that specific check from TestStructTypes. Note that D105471
added a series of tests that already cover this case (and the added checks
automatically adjust to whatever size the target compiler chooses for empty
structs).
The test I added in commit 078003482e90ff5c7ba047a3d3152f0b0c392b31 was using
SIGINT for testing the tab completion. The idea is to have a signal that only
has one possible completion and I ended up picking SIGIN -> SIGINT for the test.
However on non-Linux systems there is SIGINFO which is a valid completion for
`SIGIN' and so the test fails there.
This replaces SIGIN -> SIGINT with SIGPIP -> SIGPIPE completion which according
to LLDB's signal list in Host.cpp is the only valid completion.
This patch introduces Scripted Processes to lldb.
The goal, here, is to be able to attach in the debugger to fake processes
that are backed by script files (in Python, Lua, Swift, etc ...) and
inspect them statically.
Scripted Processes can be used in cooperative multithreading environments
like the XNU Kernel or other real-time operating systems, but it can
also help us improve the debugger testing infrastructure by writting
synthetic tests that simulates hard-to-reproduce process/thread states.
Although ScriptedProcess is not feature-complete at the moment, it has
basic execution capabilities and will improve in the following patches.
rdar://65508855
Differential Revision: https://reviews.llvm.org/D100384
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
`CompletionRequest::AddCompletion` adds the given string as completion of the
current command token. `CompletionRequest::TryCompleteCurrentArg` only adds it
if the current token is a prefix of the given string. We're using
`AddCompletion` for the `process signal` handler which means that `process
signal SIGIN` doesn't get uniquely completed to `process signal SIGINT` as we
unconditionally add all other signals (such as `SIGABRT`) as possible
completions.
By using `TryCompleteCurrentArg` we actually do the proper filtering which will
only add `SIGINT` (as that's the only signal with the prefix 'SIGIN' in the
example above).
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D105028
C doesn't allow empty structs but Clang/GCC support them and give them a size of 0.
LLDB implements this by checking the tag kind and if it's `DW_TAG_structure_type` then
we give it a size of 0 via an empty external RecordLayout. This is done because our
internal TypeSystem is always in C++ mode (which means we would give them a size
of 1).
The current check for when we have this special case is currently too lax as types with
`DW_TAG_structure_type` can also occur in C++ with types defined using the `struct`
keyword. This means that in a C++ program with `struct Empty{};`, LLDB would return
`0` for `sizeof(Empty)` even though the correct size is 1.
This patch removes this special case and replaces it with a generic approach that just
assigns empty structs the byte_size as specified in DWARF. The GCC/Clang special
case is handles as they both emit an explicit `DW_AT_byte_size` of 0. And if another
compiler decides to use a different byte size for this case then this should also be
handled by the same code as long as that information is provided via `DW_AT_byte_size`.
Reviewed By: werat, shafik
Differential Revision: https://reviews.llvm.org/D105471
This patch adds code to process save-core for Mach-O files which
embeds an "addrable bits" LC_NOTE when the process is using a
code address mask (e.g. AArch64 v8.3 with ptrauth aka arm64e).
Add code to ObjectFileMachO to read that LC_NOTE from corefiles,
and ProcessMachCore to set the process masks based on it when reading
a corefile back in.
Also have "process status --verbose" print the current address masks
that lldb is using internally to strip ptrauth bits off of addresses.
Differential Revision: https://reviews.llvm.org/D106348
rdar://68630113
