This converts the intermediate VPR use assertion to a condition in the if-statement to protect against assertion failures in case behaviuour is changed.
This is a follow-up to https://reviews.llvm.org/D90935 and implements the post-approval comments.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D91790
This introduces a new pseudo instruction, almost identical to a
t2DoLoopStart but taking 2 parameters - the original loop iteration
count needed for a low overhead loop, plus the VCTP element count needed
for a DLSTP instruction setting up a tail predicated loop. The idea is
that the instruction holds both values and the backend
ARMLowOverheadLoops pass can pick between the two, depending on whether
it creates a tail predicated loop or falls back to a low overhead loop.
To do that there needs to be something that converts a t2DoLoopStart to
a t2DoLoopStartTP, for which this patch repurposes the
MVEVPTOptimisationsPass as a "tail predication and vpt optimisation"
pass. The extra operand for the t2DoLoopStartTP is chosen based on the
operands of VCTP's in the loop, and the instruction is moved as late in
the block as possible to attempt to increase the likelihood of making
tail predicated loops.
Differential Revision: https://reviews.llvm.org/D90591
This changes the definition of t2DoLoopStart from
t2DoLoopStart rGPR
to
GPRlr = t2DoLoopStart rGPR
This will hopefully mean that low overhead loops are more tied together,
and we can more reliably generate loops without reverting or being at
the whims of the register allocator.
This is a fairly simple change in itself, but leads to a number of other
required alterations.
- The hardware loop pass, if UsePhi is set, now generates loops of the
form:
%start = llvm.start.loop.iterations(%N)
loop:
%p = phi [%start], [%dec]
%dec = llvm.loop.decrement.reg(%p, 1)
%c = icmp ne %dec, 0
br %c, loop, exit
- For this a new llvm.start.loop.iterations intrinsic was added, identical
to llvm.set.loop.iterations but produces a value as seen above, gluing
the loop together more through def-use chains.
- This new instrinsic conceptually produces the same output as input,
which is taught to SCEV so that the checks in MVETailPredication are not
affected.
- Some minor changes are needed to the ARMLowOverheadLoop pass, but it has
been left mostly as before. We should now more reliably be able to tell
that the t2DoLoopStart is correct without having to prove it, but
t2WhileLoopStart and tail-predicated loops will remain the same.
- And all the tests have been updated. There are a lot of them!
This patch on it's own might cause more trouble that it helps, with more
tail-predicated loops being reverted, but some additional patches can
hopefully improve upon that to get to something that is better overall.
Differential Revision: https://reviews.llvm.org/D89881
There were cases where a VCMP and a VPST were merged even if the VCMP
didn't have the same defs of its operands as the VPST. This is fixed by
adding RDA checks for the defs. This however gave rise to cases where
the new VPST created would precede the un-merged VCMP and so would fail
a predicate mask assertion since the VCMP wasn't predicated. This was
solved by converting the VCMP to a VPT instead of inserting the new
VPST.
Differential Revision: https://reviews.llvm.org/D90461
This reverts commit 38f625d0d1360b035271422bab922d22ed04d79a.
This commit contains some holes in its logic and has been causing
issues since it was commited. The idea sounds OK but some cases were not
handled correctly. Instead of trying to fix that up later it is probably
simpler to revert it and work to reimplement it in a more reliable way.
There are a number of places in RDA where we assume the block will not
be empty. This isn't necessarily true for tail predicated loops where we
have removed instructions. This attempt to make the pass more resilient
to empty blocks, not casting pointers to machine instructions where they
would be invalid.
The test contains a case that was previously failing, but recently been
hidden on trunk. It contains an empty block to begin with to show a
similar error.
Differential Revision: https://reviews.llvm.org/D88926
Before deciding to insert a [W|D]LSTP, check that defining LR with
the element count won't affect any other instructions that should be
taking the iteration count.
Differential Revision: https://reviews.llvm.org/D88549
Just because we haven't encountered an instruction setting the VPR,
it doesn't mean we can't create a VPT block - the VPR maybe a
live-in.
Differential Revision: https://reviews.llvm.org/D88224
9d9a11c7be037 added this check for predicatable instructions between the
D/WLSTP and the loop's start, but it was missing the last instruction in
the block. Change it to use some iterators instead.
Differential Revision: https://reviews.llvm.org/D88354
On failing to find a VCTP in the list of instructions that explicitly
predicate the entry of a VPT block, inspect whether the block is
controlled via VPT which is implicitly predicated due to it's
predicated operand(s).
Differential Revision: https://reviews.llvm.org/D87819
This might be useful for testing. We already have an option -tail-predication
but that controls the MVETailPredication pass. This
-arm-loloops-disable-tail-pred is just for disabling it in the LowoverheadLoops
pass.
Differential Revision: https://reviews.llvm.org/D88212
If the LSTP instruction is inserted with an element count low enough
to immediately predicate some lanes as false, this can have some
unintended effects on any proceeding MVE instructions in the
preheader.
Differential Revision: https://reviews.llvm.org/D88209
The VPTBlock has been modified to track the 'global' state of the
VPR, as well as the state for each block. Each object now just holds
a list of instructions that makeup the block, while static structures
hold the predicate information. This enables global access for
querying how both a VPT block and individual instructions are
predicated. These changes now allow us, again, to handle more
complicated cases where multiple instructions build a predicate
and/or where the same predicate in used in multiple blocks.
It doesn't, however, get us back to before the tracking was 'fixed'
as some extra logic will be required to properly handle VPT
instructions. Currently a VPT could be effectively predicated because
of it's inputs, but the existing logic will not detect that and so
will refuse to perform the transformation. This can be seen in
remat-vctp.ll test where we still don't perform the transform.
Differential Revision: https://reviews.llvm.org/D87681
Remove the domain from the instructions and create a shouldInspect
helper for LowOverheadLoops which queries it or a vpr operand.
Differential Revision: https://reviews.llvm.org/D87900
Clear the CurrentPredicate when we find an instruction which would
completely overwrite the VPR. This fix essentially means we're back
to not really being able to handle VPT instructions when tail
predicating.
Differential Revision: https://reviews.llvm.org/D87610
values
The effects of unpredicated vector instruction with unknown
lanes cannot be predicted and therefore cannot be tail predicated. This
does not apply to predicated vector instructions and so this patch
allows tail predication on them.
Differential Revision: https://reviews.llvm.org/D87376
count register
After my patch at D86087, code that now uses the mov operand rather than
the vctp operand will no longer remove modifications to the vctp operand
as they should. This patch fixes that by explicitly removing
modifications to the vctp operand rather than the register used as the
element count.
Remove the code that tried to look for reduction patterns, since the
vectorizer and isel can now produce predicated arithmetic instructios
within the loop body. This has required some reorganisation and fixes
around live-out and predication checks, as well as looking for cases
where an input/output is initialised to zero.
Differential Revision: https://reviews.llvm.org/D86613
VLD2/4 instructions cannot be predicated, so we cannot tail predicate
them from autovec. From intrinsics though, they should be valid as they
will just end up loading extra values into off vector lanes, not
effecting the on lanes. The same is true for loads in general where so
long as we are not using the other vector lanes, an unpredicated load
can be converted to a predicated one.
This marks VLD2 and VLD4 instructions as validForTailPredication and
allows any unpredicated load in tail predication loop, which seems to be
valid given the other checks we have.
Differential Revision: https://reviews.llvm.org/D86022
There are some cases where the instruction that sets up the iteration
count for a tail predicated loop cannot be moved before the dlstp,
stopping tail predication entirely. This patch checks if the mov operand
can be used and if so, uses that instead.
Differential Revision: https://reviews.llvm.org/D86087
While validating live-out values, record instructions that look like
a reduction. This will comprise of a vector op (for now only vadd),
a vorr (vmov) which store the previous value of vadd and then a vpsel
in the exit block which is predicated upon a vctp. This vctp will
combine the last two iterations using the vmov and vadd into a vector
which can then be consumed by a vaddv.
Once we have determined that it's safe to perform tail-predication,
we need to change this sequence of instructions so that the
predication doesn't produce incorrect code. This involves changing
the register allocation of the vadd so it updates itself and the
predication on the final iteration will not update the falsely
predicated lanes. This mimics what the vmov, vctp and vpsel do and
so we then don't need any of those instructions.
Differential Revision: https://reviews.llvm.org/D75533
Previously, the LowOverheadLoops pass couldn't handle VPT blocks
with conditions, or with multiple VCTPs. This patch improves the
LowOverheadLoops pass so it can handle those cases.
It also adds support for VCMPs before the VCTP.
Differential Revision: https://reviews.llvm.org/D78206
getARMVPTBlockMask was an outdated function that only handled basic
block masks: T, TT, TTT and TTTT. This worked fine before the MVE
VPT Block Insertion Pass improvements as it was the only kind of
masks that it could generate, but now it can generate more complex
masks that uses E predicates, so it's dangerous to use that function
to calculate VPT/VPST block masks.
I replaced it with 2 different functions:
- expandPredBlockMask, in ARMBaseInfo. This adds an "E" or "T" at
the end of an existing PredBlockMask.
- recomputeVPTBlockMask, in Thumb2InstrInfo. This takes an iterator
to a VPT/VPST instruction and recomputes its block mask by looking
at the predicated instructions that follows it. This should be
used to recompute a block mask after removing/adding a predicated
instruction to the block.
The expandPredBlockMask function is pretty much imported from the MVE
VPT Blocks pass.
I had to change the ARMLowOverheadLoops and MVEVPTBlocks passes as well
so they could use these new functions.
Differential Revision: https://reviews.llvm.org/D78201
This adds some extra processing into the Pre-RA ARM load/store optimizer
to detect and merge MVE loads/stores and adds of the same base. This we
don't always turn into a post-inc during ISel, and due to the nature of
it being a graph we don't always know an order to use for the nodes, not
knowing which nodes to make post-inc and which to use the new post-inc
of. After ISel, we have an order that we can use to post-inc the
following instructions.
So this looks for a loads/store with a starting offset of 0, and an
add/sub from the same base, plus a number of other loads/stores. We then
do some checks and convert the zero offset load/store into a postinc
variant. Any loads/stores after it have the offset subtracted from their
immediates. For example:
LDR #4 LDR #4
LDR #0 LDR_POSTINC #16
LDR #8 LDR #-8
LDR #12 LDR #-4
ADD #16
It only handles MVE loads/stores at the moment. Normal loads/store will
be added in a followup patch, they just have some extra details to
ensure that we keep generating LDRD/LDM successfully.
Differential Revision: https://reviews.llvm.org/D77813
VPTMaskValue was using the "instruction" encoding to represent the masks
(= the same encoding as the one used by the instructions in an object file),
but it is only used to build MCOperands, so it should use the MCOperand
encoding of the masks, which is slightly different.
Differential Revision: https://reviews.llvm.org/D76139
Add a bit more logic into the 'FalseLaneZeros' tracking to enable
horizontal reductions and also make the VADDV variants
validForTailPredication.
Differential Revision: https://reviews.llvm.org/D76708
Given that some instructions generate wider result elements than
their inputs, flag them as being able to generate non zeros in the
false lanes.
Differential Revision: https://reviews.llvm.org/D76766
Modify ValidateLiveOuts to track 'FalseLaneZeros' more precisely,
including checks on specific operations that can generate non-zeros
from zero values, e.g VMVN. We can then check that any instructions
that retain some information in their output register (all narrowing
instructions) that they only use and def registers that always have
zeros in their falsely predicated bytes, whether or not tail
predication happens.
Most of the logic remains the same, just the names of the data
structures and helpers have been renamed to reflect the change in
logic. The key change, apart from the opcode checkers, is that the
FalseZeros set now strictly contains only instructions which will
always generate zeros, and not instructions that could also have
their false bytes masked away later.
Differential Revision: https://reviews.llvm.org/D76235
Iterate through the loop and check that the observable values
produced are the same whether tail predication happens or not.
We want to find out if the tail-predicated version of this loop will
produce the same values as the loop in its original form. For this to
be true, the newly inserted implicit predication must not change the
the (observable) results.
We're doing this because many instructions in the loop will not be
predicated and so the conversion from VPT predication to tail
predication can result in different values being produced, because of
falsely predicated lanes not being updated in the converted form.
A masked load, whether through VPT or tail predication, will write
zeros to any of the falsely predicated bytes. So, from the loads, we
know that the false lanes are zeroed and here we're trying to track
that those false lanes remain zero, or where they change, the
differences are masked away by their user(s).
All MVE loads and stores have to be predicated, so we know that any
load operands, or stored results are equivalent already. Other
explicitly predicated instructions will perform the same operation in
the original loop and the tail-predicated form too. Because of this,
we can insert loads, stores and other predicated instructions into
our KnownFalseZeros set and build from there.
Differential Revision: https://reviews.llvm.org/D75452
Use MIOperand in collectLocalKilledOperands to make the search
global, as we already have to search for global uses too. This
allows us to delete more dead code when tail predicating.
Differential Revision: https://reviews.llvm.org/D75167
