lowerGlobalAddress added by D128427 can be used for PIC. The actual condition is
that the global value needs to be dso_local (a dso_preemptable one needs GOT
indirection).
load-store.ll has UB due to out-of-bounds load/store. Fix the UB in the variable
test and add an array test. Note: NOPIC array index is currently wrong.
Reviewed By: wangleiat
Differential Revision: https://reviews.llvm.org/D129977
The patch adds SPIRVPrepareFunctions pass, which modifies function
signatures containing aggregate arguments and/or return values before
IR translation. Information about the original signatures is stored in
metadata. It is used during call lowering to restore correct SPIR-V types
of function arguments and return values. This pass also substitutes some
llvm intrinsic calls to function calls, generating the necessary functions
in the module, as the SPIRV translator does.
The patch also includes changes in other modules, fixing errors and
enabling many SPIR-V features that were omitted earlier. And 15 LIT tests
are also added to demonstrate the new functionality.
Differential Revision: https://reviews.llvm.org/D129730
Co-authored-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Co-authored-by: Michal Paszkowski <michal.paszkowski@outlook.com>
Co-authored-by: Andrey Tretyakov <andrey1.tretyakov@intel.com>
Co-authored-by: Konrad Trifunovic <konrad.trifunovic@intel.com>
This code confuses LV's "Uniform" and LVL/LAI's "Uniform". Despite the
common name, these are different.
* LVs notion means that only the first lane *of each unrolled part* is
required. That is, lanes within a single unroll factor are considered
uniform. This allows e.g. widenable memory ops to be considered
uses of uniform computations.
* LVL and LAI's notion refers to all lanes across all unrollings.
IsUniformMem is in turn defined in terms of LAI's notion. Thus a
UniformMemOpmeans is a memory operation with a loop invariant address.
This means the same address is accessed in every iteration.
The tweaked piece of code was trying to match a uniform mem op (i.e.
fully loop invariant address), but instead checked for LV's notion of
uniformity. In theory, this meant with UF > 1, we could speculate
a load which wasn't safe to execute.
This ends up being mostly silent in current code as it is nearly
impossible to create the case where this difference is visible. The
closest I've come in the test case from 54cb87, but even then, the
incorrect result is only visible in the vplan debug output; before this
change we sink the unsafely speculated load back into the user's predicate
blocks before emitting IR. Both before and after IR are correct so the
differences aren't "interesting".
The other test changes are uninteresting. They're cases where LV's uniform
analysis is slightly weaker than SCEV isLoopInvariant.
We can always fold zext.b since it is just andi. The others require
Zba/Zbb.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D130302
Adds a number of utilities that are used to help create and update
memprof related metadata. These will be used during profile matching
and annotation, as well as by the inliner when updating the metadata.
Also adds unit tests for the utilities.
See also related RFCs:
RFC: Sanitizer-based Heap Profiler [1]
RFC: A binary serialization format for MemProf [2]
RFC: IR metadata format for MemProf [3]
(Note that the IR metadata format has changed from the RFC during
implementation, as described in the preceeding patch adding the basic
metadata and verification support.)
Depends on D128141.
Differential Revision: https://reviews.llvm.org/D128854
If we build the Target libraries with -fvisibility=hidden, then
LLVM_EXTERNAL_VISIBILITY must also be able to override it back
to default visibility.
Currently, the LLVM_EXTERNAL_VISIBILITY define is a no-op for
mingw targets, thus set CMAKE_CXX_VISIBILITY_PRESET correspondingly.
This unbreaks the mingw dylib build, if the compiler actually
takes hidden visiblity into account (e.g. after D130121).
(Later, once hidden visiblity can be used for MinGW targets, we
can make LLVM_EXTERNAL_VISIBILITY and LLVM_LIBRARY_VISIBILITY expand
to actual attributes, and reverse this commit.)
Differential Revision: https://reviews.llvm.org/D130200
This probably should have been part of D123089, but the effects of it
don't show up until we start removing functions from the table in
D130107. Oops.
Differential Revision: https://reviews.llvm.org/D130184
This allows us to accept annotations from out-of-tree languages (the
example test is derived from Rust) so they can enjoy the benefits of
LLVM's optimizations without requiring LLVM to have language-specific
knowledge.
Differential Revision: https://reviews.llvm.org/D123091
Prior to this change, we relied on the hard-coded list for all of the
information performed by MemoryBuiltins. With this change, we're able to
start relying on properites of functions described in attributes, which
opens the door to out-of-tree compilers being able to describe their
allocator functions to LLVM's optimizer logic without having to register
their implementation details with LLVM.
Differential Revision: https://reviews.llvm.org/D123090
The InstCombine test is reduced from issue #56601. Without the more
liberal match for ConstantExpr, we try to rearrange constants in
Negator forever.
Alternatively, we could adjust the definition of m_ImmConstant to be
more conservative, but that's probably a larger patch, and I don't
see any downside to changing m_ConstantExpr. We never capture and
modify a ConstantExpr; transforms just want to avoid it.
Differential Revision: https://reviews.llvm.org/D130286
No need to add checks for every type per pointer that we couldn't create
a check for the first time around, just the types that weren't
successful.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D119376
This change implements the contextual symbolizer markup elements: reset,
module, and mmap. These provide information about the runtime context of
the binary necessary to resolve addresses to symbolic values.
Summary information is printed to the output about this context.
Multiple mmap elements for the same module line are coalesced together.
The standard requires that such elements occur on their own lines to
allow for this; accordingly, anything after a contextual element on a
line is silently discarded.
Implementing this cleanly requires that the filter drive the parser;
this allows skipped sections to avoid being parsed. This also makes the
filter quite a bit easier to use, at the cost of some unused
flexibility.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D129519
If error occurs on constructing coverage info for one of the object files, it prints the name of the object file, so that users know which one is the cause of error.
Differential Revision: https://reviews.llvm.org/D130196
Ignore the flag for now, but we can start using it for verbose output if needed.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D130202
This patch adds the AArch64 hook for preferPredicateOverEpilogue,
which currently returns true if SVE is enabled and one of the
following conditions (non-exhaustive) is met:
1. The "sve-tail-folding" option is set to "all", or
2. The "sve-tail-folding" option is set to "all+noreductions"
and the loop does not contain reductions,
3. The "sve-tail-folding" option is set to "all+norecurrences"
and the loop has no first-order recurrences.
Currently the default option is "disabled", but this will be
changed in a later patch.
I've added new tests to show the options behave as expected here:
Transforms/LoopVectorize/AArch64/sve-tail-folding-option.ll
Differential Revision: https://reviews.llvm.org/D129560
Replace the value-accepting isReallocLikeFn() overload with a
getReallocatedOperand() function, which returns which operand is
the one being reallocated. Currently, this is always the first one,
but once allockind(realloc) is respected, the reallocated operand
will be determined by the allocptr parameter attribute.
Remove isFreeCall() in favor of getFreedOperand(). Replace the
two remaining uses with a getFreedOperand() != nullptr check, as
they only care that something is getting freed. (The usage in DSE
is correct as such. The allocator-related checks in CFLGraph look
rather questionable in general.)
Use getFreedOperand() instead of isFreeCall() to remove the
implicit assumption that any pointer operand to a free function
is the operand being freed. This won't actually matter until we
handle allockind(free).
This patch merges a consecutive sequence of
s_or_saveexec s_o, s_i
s_xor exec, exec, s_o
into a single
s_andn2_saveexec s_o, s_i instruction.
This patch also cleans up the SIOptimizeExecMasking pass a bit.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D129073
DWARF files may contain overlapping address ranges. f.e. it can happen if the two
copies of the function have identical instruction sequences and they end up sharing.
That looks incorrect from the point of view of DWARF spec. Current implementation
of DWARFLinker does not combine overlapped address ranges. It would be good if such
ranges would be handled in some useful way. Thus, this patch allows DWARFLinker
to combine overlapped ranges in a single one.
Depends on D86539
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D123469
This patch lowers
duplane128(insert_subvector(undef, bitcast(op(128bitsubvec)), 0), 0)
to
bitcast(duplane128(insert_subvector(undef, op(128bitsubvec), 0), 0)).
This enables floating-point loads to match patterns added in
https://reviews.llvm.org/D130010
Differential Revision: https://reviews.llvm.org/D130013
We currently assume in a number of places that free-like functions
free their first argument. This is true for all hardcoded free-like
functions, but with the new attribute-based design, the freed
argument is supposed to be indicated by the allocptr attribute.
To make sure we handle this correctly once allockind(free) is
respected, add a getFreedOperand() helper which returns the freed
argument, rather than just indicating whether the call frees *some*
argument.
This migrates most but not all users of isFreeCall() to the new
API. The remaining users are a bit more tricky.
DWARF files may contain overlapping address ranges. f.e. it can happen if the two
copies of the function have identical instruction sequences and they end up sharing.
That looks incorrect from the point of view of DWARF spec. Current implementation
of DWARFLinker does not combine overlapped address ranges. It would be good if such
ranges would be handled in some useful way. Thus, this patch allows DWARFLinker
to combine overlapped ranges in a single one.
Depends on D86539
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D123469
Reapply the patch with getObjectSize() replaced by getAllocSize().
The former will also look through calls that return their argument,
and we'll end up placing dereferenceable attributes on intrinsics
like llvm.launder.invariant.group. While this isn't wrong, it also
doesn't seem to be particularly useful. For now, use getAllocSize()
instead, which sticks closer to the original behavior of this code.
-----
This code is just interested in the allocsize, not any other
allocator properties.
Default getAllocSize() to use the trivial mapper. Also switch
from using std::function to function_ref.
Furthermore, update the doc comment to point out a subtle difference
between getAllocSize() and getObjectSize(): The latter may also
return something for calls that return their argument (via "returned"
attribute or special intrinsics like invariant groups).
Fetching allocation data for calls is a rather hot operation, and
TLI lookups are slow. We can greatly reduce the number of calls
for which TLI is queried by checking that they return a pointer
value first, as this is a requirement for allocation functions
anyway.
- Test cases for arch only has 16-bit instruction such as ck801/ck802 need
compile with -mattr=+btst16
- Fix the GPR copy instruction with MOV16 for 16-bit only arch.
Vector fptosi_sat and fptoui_sat were being expanded by unrolling the
vector operation. This doesn't work for scalable vector, so this patch
adds a call to TLI.expandFP_TO_INT_SAT if the vector is scalable.
Scalable tests are added for AArch64 and RISCV. Some of the AArch64
fptoi_sat operations should be legal, but that will be handled in
another patch.
Differential Revision: https://reviews.llvm.org/D130028
There is a problem in loop cache analysis that the types of SCEV variables
`Coeff` and `ElemSize` in function `isConsecutive()` may not match. The
mismatch would cause SCEV failures when `Coeff` is multiplied with `ElemSize`.
The fix in this patch is to extend the type of both `Coeff` and `ElemSize` to
whichever is wider in those two variables. As a clean-up, duplicate calculations
of `Stride` in `computeRefCost()` is then removed.
Reviewed By: Meinersbur, #loopoptwg
Differential Revision: https://reviews.llvm.org/D128877
(srl (and X, 1<<C), C) is the form we receive for testing bit C.
An earlier combine removed the setcc so it wasn't there to match
when we created the SELECT_CC. This doesn't happen for BR_CC because
generic DAG combine rebuilds the setcc if it is used by BRCOND.
We can shift X left by XLen-1-C to put the bit to be tested in the
MSB, and use a signed compare with 0 to test the MSB.
The only difference between the combines were the calls to getNode
that include the true/false values for SELECT_CC or the chain
and branch target for BR_CC.
Wrap the rest of the code into a helper that reads LHS, RHS, and
CC and outputs new values and a bool if a new node needs to be
created.
