The `lowerMSASplatImm` function zero-extends `i32` immediates while
building constant. If target type is `i64`, negative immediate loses
the sign. As a result, for example `__builtin_msa_ldi_d(-1)` lowered
to series of instruction loads incorrect value 0xffffffff to the `$w0`
register instead of single `ldi.d $w0, -1` instruction.
The fix zero-extends unsigned immediates and signed-extend signed
immediates.
Differential Revision: http://reviews.llvm.org/D59884
llvm-svn: 357264
Summary:
PowerPC64/PowerPC64le supports the builtin function __builtin_setrnd to set the floating point rounding mode. This function will use the least significant two bits of integer argument to set the floating point rounding mode.
double __builtin_setrnd(int mode);
The effective values for mode are:
0 - round to nearest
1 - round to zero
2 - round to +infinity
3 - round to -infinity
Note that the mode argument will modulo 4, so if the int argument is greater than 3, it will only use the least significant two bits of the mode. Namely, builtin_setrnd(102)) is equal to builtin_setrnd(2).
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D59405
llvm-svn: 357241
Some DAG mutations can only be applied to `ScheduleDAGMI`, and have to
internally cast a `ScheduleDAGInstrs` to `ScheduleDAGMI`.
There is nothing actually specific to `ScheduleDAGMI` in `Topo`.
llvm-svn: 357239
The register index can only really be an SGPR. Lie that a VGPR index
is legal, and then rewrite the instruction in a waterfall loop to
handle the index.
llvm-svn: 357235
A shift and add/sub sequence combination is faster in place of a multiply by constant.
Because the cycle or latency of multiply is not huge, we only consider such following
worthy patterns.
```
(mul x, 2^N + 1) => (add (shl x, N), x)
(mul x, -(2^N + 1)) => -(add (shl x, N), x)
(mul x, 2^N - 1) => (sub (shl x, N), x)
(mul x, -(2^N - 1)) => (sub x, (shl x, N))
```
And the cycles or latency is subtarget-dependent so that we need consider the
subtarget to determine to do or not do such transformation.
Also data type is considered for different cycles or latency to do multiply.
Differential Revision: https://reviews.llvm.org/D58950
llvm-svn: 357233
Summary:
It does not currently make sense to use WebAssembly features in some functions
but not others, so this CL adds an IR pass that takes the union of all used
feature sets and applies it to each function in the module. This allows us to
prevent atomics from being lowered away if some function has opted in to using
them. When atomics is not enabled anywhere, we detect whether there exists any
atomic operations or thread local storage that would be stripped and disallow
linking with objects that contain atomics if and only if atomics or tls are
stripped. When atomics is enabled, mark it as used but do not require it of
other objects in the link. These changes allow libraries that do not use atomics
to be built once and linked into both single-threaded and multithreaded
binaries.
Reviewers: aheejin, sbc100, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59625
llvm-svn: 357226
For multi-dimensional array like below
int a[2][3];
the previous implementation generates BTF_KIND_ARRAY type
like below:
. element_type: int
. index_type: unsigned int
. number of elements: 6
This is not the best way to represent arrays, esp.,
when converting BTF back to headers and users will see
int a[6];
instead.
This patch generates proper support for multi-dimensional arrays.
For "int a[2][3]", the two BTF_KIND_ARRAY types will be
generated:
Type #n:
. element_type: int
. index_type: unsigned int
. number of elements: 3
Type #(n+1):
. element_type: #n
. index_type: unsigned int
. number of elements: 2
The linux kernel already supports such a multi-dimensional
array representation properly.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D59943
llvm-svn: 357215
For 64-bit operations we should consider if the immediate can be made to fit
in an unsigned 32-bits immedate. For OR/XOR this allows us to load the immediate
with MOV32ri instead of movabsq. For AND this allows us to fold the immediate.
Differential Revision: https://reviews.llvm.org/D59867
llvm-svn: 357196
This avoids allocating a few KB of heap memory on startup, and instead
allocates these maps lazily. I noticed this while profiling LLD.
llvm-svn: 357192
This is probably the least important of our movmsk problems, but I'm starting
at the bottom to reduce distractions.
We were creating a select_cc which bypasses the select and bitmask codegen
optimizations that we have now. If we produce a compare+negate instead, we
allow things like neg/sbb carry bit hacks, and in all cases we avoid a cmov.
There's no partial register update danger in these sequences because we always
produce the zero-register xor ahead of the 'set' if needed.
There seems to be a missing fold for sext of a bool bit here:
negl %ecx
movslq %ecx, %rax
...but that's an independent transform.
Differential Revision: https://reviews.llvm.org/D59818
llvm-svn: 357172
Summary:
This adds a BranchFusion feature to replace the usage of the MacroFusion
for AMD CPUs.
See D59688 for context.
Reviewers: andreadb, lebedev.ri
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59872
llvm-svn: 357171
Based on llvm-exegesis measurements.
Now that llvm-exegesis is ~2 magnitudes faster, and is a bit smarter,
it is now possible to continue cleanup of the scheduler model.
With this, there are no more latency inconsistencies for the
opcodes that produce stable measurements, and only a few inconsistencies
for unstable measurements (MMX_* opcodes, opcodes that llvm-exegesis
measures by chaining - CMP, TEST, BT, SETcc, CVT, MOV, etc.)
llvm-svn: 357169
G_SELECT uses a 1-bit scalar for the condition, and is currently
implemented with a plain CMPri against 0. This means that values such as
0x1110 are interpreted as true, when instead the higher bits should be
treated as undefined and therefore ignored. Replace the CMPri with a
TSTri against 0x1, which performs an implicit AND, yielding the expected
result.
llvm-svn: 357153
These fixup kinds are not explicitly related to the code section. They
are there to signal how to apply the fixup.
Also, a couple of other minor wasm cleanups.
Differential Revision: https://reviews.llvm.org/D59908
llvm-svn: 357145
The last reference to this function was removed from the ARM
td files in 2015 in rL225266.
Differential Revision: https://reviews.llvm.org/D59868
llvm-svn: 357130
If we know the 2 halves of an oversized zext-in-reg are the same,
don't create those halves independently.
I tried several different approaches to fold this, but it's difficult
to get right during legalization. In the default path, we are creating
a generic shuffle that looks like an unpack high, but it can get
transformed into a different mask (a blend), so it's not
straightforward to match that. If we try to fold after it actually
becomes an X86ISD::UNPCKH node, we can't be sure what the operand node
is - it might be a generic shuffle, or it could be some x86-specific op.
From the test output, we should be doing something like this for SSE4.1
as well, but I'd rather leave that as a follow-up since it involves
changing lowering actions.
Differential Revision: https://reviews.llvm.org/D59777
llvm-svn: 357129
This is not exactly NFC because it should make further combines
of MOVMSK easier to match, but there should be no outward differences
because we have isel patterns in place specifically to allow this. See:
// Also support integer VTs to avoid a int->fp bitcast in the DAG.
llvm-svn: 357128
This makes more sense as a place to initialize these. I don't think runOnMachineFunction was overriden when these cached values were originally created.
llvm-svn: 357123
When lowering a load or store for TypeWidenVector, the type legalizer
would use a single load or store if the associated integer type was legal
or promoted. E.g. it loads a v4i8 as an i32 if i32 is legal/promotable.
(See https://reviews.llvm.org/rL236528 for reference.)
This applies that behaviour to vector types. If the vector type is
TypePromoteInteger, the element type is going to be TypePromoteInteger
as well, which will lead to have a single promoting load rather than N
individual promoting loads. For instance, if we have a v3i1, we would
now have a load of v4i1 instead of 3 loads of i1.
Patch by Guillaume Marques. Thanks!
Differential Revision: https://reviews.llvm.org/D56201
llvm-svn: 357120
ARMBaseInstrInfo::getNumLDMAddresses is making bad assumptions about the
memory operands of load and store-multiple operations. This doesn't
really fix the problem properly, but it's enough to prevent crashing,
at least.
Fixes https://bugs.llvm.org/show_bug.cgi?id=41231 .
Differential Revision: https://reviews.llvm.org/D59834
llvm-svn: 357109
This reapplies r356149, using the correct overload of findUnusedReg
which passes the current iterator.
This worked most of the time, because the scavenger iterator was moved
at the end of the frame index loop in PEI. This would fail if the
spill was the first instruction. This was further hidden by the fact
that the scavenger wasn't passed in for normal frame index
elimination.
llvm-svn: 357098
Haswell CPUs have special support for SHLD/SHRD with the same register for both sources. Such an instruction will go to the rotate/shift unit on port 0 or 6. This gives it 1 cycle latency and 0.5 cycle reciprocal throughput. When the register is not the same, it becomes a 3 cycle operation on port 1. Sandybridge and Ivybridge always have 1 cyc latency and 0.5 cycle reciprocal throughput for any SHLD.
When FastSHLDRotate feature flag is set, we try to use SHLD for rotate by immediate unless BMI2 is enabled. But MachineCopyPropagation can look through a copy and change one of the sources to be different. This will break the hardware optimization.
This patch adds psuedo instruction to hide the second source input until after register allocation and MachineCopyPropagation. I'm not sure if this is the best way to do this or if there's some other way we can make this work.
Fixes PR41055
Differential Revision: https://reviews.llvm.org/D59391
llvm-svn: 357096
This patch fixes an assembler bug that allowed SVE vector registers to contain a
type suffix when not expected. The SVE unpredicated movprfx instruction is the
only instruction affected.
The following are examples of what was previously valid:
movprfx z0.b, z0.b
movprfx z0.b, z0.s
movprfx z0, z0.s
These instructions are now erroneous.
Patch by Cullen Rhodes (c-rhodes)
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D59636
llvm-svn: 357094
Also includes one example of how this transform is unsound. This isn't
verifying the copies are used in the control flow intrinisic patterns.
Also add option to disable exec mask opt pass. Since this pass is
unsound, it may be useful to turn it off until it is fixed.
llvm-svn: 357091
The .BTF.ext FuncInfoTable and LineInfoTable contain
information organized per ELF section. Current definition
of FuncInfoTable/LineInfoTable is:
std::unordered_map<uint32_t, std::vector<BTFFuncInfo>> FuncInfoTable
std::unordered_map<uint32_t, std::vector<BTFLineInfo>> LineInfoTable
where the key is the section name off in the string table.
The unordered_map may cause the order of section output
different for different platforms.
The same for unordered map definition of
std::unordered_map<std::string, std::unique_ptr<BTFKindDataSec>>
DataSecEntries
where BTF_KIND_DATASEC entries may have different ordering
for different platforms.
This patch fixed the issue by using std::map.
Test static-var-derived-type.ll is modified to generate two
DataSec's which will ensure the ordering is the same for all
supported platforms.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 357077
Cleanup isAArch64FrameOffsetLegal by:
- Merging the large switch statement to reuse AArch64InstrInfo::getMemOpInfo().
- Using AArch64InstrInfo::getUnscaledLdSt() to determine whether an instruction
has an unscaled variant.
- Simplifying the logic that calculates the offset to fit the immediate.
Reviewers: paquette, evandro, eli.friedman, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D59636
llvm-svn: 357064
Enable SSE41 ZERO_EXTEND_VECTOR_INREG shuffle combines - for the PMOVZX(PSHUFD(V)) -> UNPCKH(V,0) pattern we reduce the shuffles (port5-bottleneck on Intel) at the expense of creating a zero (pxor v,v) and an extra register move - which is a good trade off as these are pretty cheap and in most cases it doesn't increase register pressure.
This also exposed a missed opportunity to use combine to ZERO_EXTEND_VECTOR_INREG with folded loads - even if we're in the float domain.
........
Causes PR41249
llvm-svn: 357057
Previously we manually selected the AND/OR/XOR with immediate and the SHL(or ADD if the shift is 1). But this was missing out on the opportunity to use a 64 bit AND with a 32-bit immediate and possibly other isel tricks we have built into the tables.
Instead, insert the new nodes into the DAG using insertDAGNode and allow them each to be selected through the normal table.
llvm-svn: 357049
This patch lays the groundwork for extending the generic machine scheduler by providing a PPC-specific implementation.
There are no functional changes as this is an incremental patch that simply provides the necessary overrides which just
encapsulate the behavior of the generic scheduler. Subsequent patches will add specific behavior.
Differential Revision: https://reviews.llvm.org/D59284
llvm-svn: 357047
We were manually outputting the code we would get from selecting ANY_EXTEND. We
can save some code by just letting an ANY_EXTEND go through isel on its own.
llvm-svn: 357045
