The remote stub may give lldb hints about binaries to
be loaded, especially in a firmware type environment, and
relay those hints in the qProcessInfo response. The
binary loading was done very early in Process setup, before
we had any threads, and this made it complicated for people
to write dSYM python scripts which need access to a thread.
Delay the binary loading until a bit later in the Process
startup.
Differential Revision: https://reviews.llvm.org/D141972
rdar://104235301
It seems like these were copied from the single-step code and not
updated to match the new flags.
Differential revision: https://reviews.llvm.org/D141816
In RegisterInfos_loongarch64.h, r22 is defined twice. Having an extra array
member causes problems reading and writing registers defined after r22. So,
for r22, keep the alias fp, delete the s9 alias.
The PC register is incorrectly accessed when the step command is executed.
The step command behavior is incorrect.
This test reflects this problem:
```
loongson@linux:~$ cat test.c
#include <stdio.h>
int func(int a) {
return a + 1;
}
int main(int argc, char const *argv[]) {
func(10);
return 0;
}
loongson@linux:~$ clang -g test.c -o test
```
Without this patch:
```
loongson@linux:~$ llvm-project/llvm/build/bin/lldb test
(lldb) target create "test"
Current executable set to '/home/loongson/test' (loongarch64).
(lldb) b main
Breakpoint 1: where = test`main + 40 at test.c:8:3, address = 0x0000000120000668
(lldb) r
Process 278049 launched: '/home/loongson/test' (loongarch64)
Process 278049 stopped
* thread #1, name = 'test', stop reason = breakpoint 1.1
frame #0: 0x0000000120000668 test`main(argc=1, argv=0x00007fffffff72a8) at test.c:8:3
5 }
6
7 int main(int argc, char const *argv[]) {
-> 8 func(10);
9 return 0;
10 }
11
(lldb) s
Process 278049 stopped
* thread #1, name = 'test', stop reason = step in
frame #0: 0x0000000120000670 test`main(argc=1, argv=0x00007fffffff72a8) at test.c:9:3
6
7 int main(int argc, char const *argv[]) {
8 func(10);
-> 9 return 0;
10 }
```
With this patch:
```
loongson@linux:~$ llvm-project/llvm/build/bin/lldb test
(lldb) target create "test"
Current executable set to '/home/loongson/test' (loongarch64).
(lldb) b main
Breakpoint 1: where = test`main + 40 at test.c:8:3, address = 0x0000000120000668
(lldb) r
Process 278632 launched: '/home/loongson/test' (loongarch64)
Process 278632 stopped
* thread #1, name = 'test', stop reason = breakpoint 1.1
frame #0: 0x0000000120000668 test`main(argc=1, argv=0x00007fffffff72a8) at test.c:8:3
5 }
6
7 int main(int argc, char const *argv[]) {
-> 8 func(10);
9 return 0;
10 }
11
(lldb) s
Process 278632 stopped
* thread #1, name = 'test', stop reason = step in
frame #0: 0x0000000120000624 test`func(a=10) at test.c:4:10
1 #include <stdio.h>
2
3 int func(int a) {
-> 4 return a + 1;
5 }
```
Reviewed By: SixWeining, DavidSpickett
Differential Revision: https://reviews.llvm.org/D140615
This patch enhances queue support in Scripted Processes.
Scripted Threads could already report their queue name if they had one,
but this information was only surfaced when getting the process and
thread status.
However, no queue was create and added to the scripted process queue
list. This patch improves that by creating a queue from the scripted
thread queue name. For now, it uses an invalid queue id, since the
scripted thread doesn't expose this capability yet, but this could
easily be supported if the queue id information is available.
rdar://98844004
Differential Revision: https://reviews.llvm.org/D139853
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch moves the ScriptedProcessInfo class out of the
ScriptedProcess and hoist it as a standalone interpreter class, so it can be
reused with the Scripted Platform.
Differential Revision: https://reviews.llvm.org/D139247
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
As a last resort, with a Mach-O corefile, lldb will iterate through
all memory segments looking for a dyld binary (for a userland process
core dump) or an xnu kernel binary (kernel coredump). We often
have metadata via LC_NOTEs so this final search mechanism is not
needed. During the rewrite in https://reviews.llvm.org/D133680 I
did not handle the case of finding the xnu kernel by exhaustive
search correctly.
rdar://103813200
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
The dynamic linker on Darwin, dyld, can provide status of
the process state for a few significant points early on,
most importantly, when libSystem has been initialized and it
is safe to call functions behind the scenes. Pipe this
information up from debugserver to DynamicLoaderMacOS, for
the DynamicLoader::IsFullyInitialized() method, then have
Thread::SafeToCallFunctions use this information. Finally,
for the two utility functions in the AppleObjCRuntimeV2
LanguageRuntime plugin that I was fixing, call this method
before running our utility functions to collect the list of
objc classes registered in the runtime.
User expressions will still be allowed to run any time -
we assume the user knows what they are doing - but these
two additional utility functions that they are unaware of
will be limited by this state.
Differential Revision: https://reviews.llvm.org/D139054
rdar://102436092
can probably make function calls.
Hardware single stepping is not currently supported by the linux kernel.
In order to support single step debugging, add EmulateInstructionLoongArch
to implement the software Single Stepping. This patch only support the
simplest single step execution of non-jump instructions.
Reviewed By: SixWeining, DavidSpickett
Differential Revision: https://reviews.llvm.org/D139158
Hardware single stepping is not currently supported by the linux kernel.
In order to support single step debugging, add EmulateInstructionLoongArch
to implement the software Single Stepping. This patch only support the
simplest single step execution of non-jump instructions.
Reviewed By: SixWeining, DavidSpickett
Differential Revision: https://reviews.llvm.org/D139158
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
Use the same register layout as Linux kernel, implement the
related read and write operations.
Reviewed By: SixWeining, xen0n, DavidSpickett
Differential Revision: https://reviews.llvm.org/D138407
A malformed qMemoryRegionInfo response can easily trigger an infinite
loop if regions end (base + size) wraps the address space. A
particularly interesting is the case where base+size=0, which a stub
could use to say that the rest of the memory space is unmapped, even
though lldb expects 0xff... in this case.
One could argue which behavior is more correct (technically, the
current behavior does not say anything about the last byte), but unless
we stop using 0xff... to mean "invalid address", that discussion is very
academic. This patch truncates address ranges which wraps the address
space, which handles the zero case as well as other kinds of malformed
packets.
Allow users to access FPR registers by names or ABI names.
PS: This patch should be merged after D137508
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D137761
This patch uses RISCV ABI register name as `alt_name` in `RegisterInfo` in `lldb-private-types.h`
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D137508
When a process gets restarted TypeSystem objects associated with it
may get deleted, and any CompilerType objects holding on to a
reference to that type system are a use-after-free in waiting. Because
of the SBAPI, we don't have tight control over where CompilerTypes go
and when they are used. This is particularly a problem in the Swift
plugin, where the scratch TypeSystem can be restarted while the
process is still running. The Swift plugin has a lock to prevent
abuse, but where there's a lock there can be bugs.
This patch changes CompilerType to store a std::weak_ptr<TypeSystem>.
Most of the std::weak_ptr<TypeSystem>* uglyness is hidden by
introducing a wrapper class CompilerType::WrappedTypeSystem that has a
dyn_cast_or_null() method. The only sites that need to know about the
weak pointer implementation detail are the ones that deal with
creating TypeSystems.
rdar://101505232
Differential Revision: https://reviews.llvm.org/D136650
In the restructuring I did in https://reviews.llvm.org/D133680 , I
call ObjectFile::LoadBinariesViaMetadata, and the process m_dyld
may be set by a method under there -- in
ProcessMachCore::LoadBinariesViaMetadata I wanted to check to see
if m_dyld_up had been set. I did this by calling the GetDynamicLoader()
method, but that method will call FindPlugin() if there is no
dynamic loader yet, and the static dynamic loader plugin was being
loaded, preventing the scan for userland binaries in a userland
corefile.
Differential Revision: https://reviews.llvm.org/D137807
rdar://102210820
For an exception crashlog, the thread backtraces aren't usually very helpful
and instead, developpers look at the "Application Specific Backtrace" that
was generated by `objc_exception_throw`.
LLDB could already parse and symbolicate these Application Specific Backtraces
for regular textual-based crashlog, so this patch adds support to parse them
in JSON crashlogs, and materialize them a HistoryThread extending the
crashed ScriptedThread.
This patch also includes the Application Specific Information messages
as part of the process extended crash information log. To do so, the
ScriptedProcess Python interface has a new GetMetadata method that
returns an arbitrary dictionary with data related to the process.
rdar://93207586
Differential Revision: https://reviews.llvm.org/D126260
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Add as little code as possible to allow compiling lldb on LoongArch.
Actual functionality will be implemented later.
Reviewed By: SixWeining, DavidSpickett
Differential Revision: https://reviews.llvm.org/D136578
The size of the m_hwp_regs array should match the default value of
m_max_hwp_supported. This ensures that no out-of-bounds accesses
occur, even if the array is accessed prior to a call to
ReadHardwareDebugInfo().
Fixes https://github.com/llvm/llvm-project/issues/54520, see also
there for additional background.
Differential Revision: https://reviews.llvm.org/D136144
It's fine right now, but will break as soon as someone else declares a
PluginProperties class in the same way.
Also tighten up the scope of the anonymous namespaces surrounding the
other PluginProperties classes.
Familiar story, callers are either checking upfront that the pointer
wasn't null or not checking at all. SetValueFromData itself didn't
check either.
So make the parameter a ref and fixup the few places where a nullptr
check seems needed.
Depends on D135668
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D135670
All callers were either assuming their pointer was not null before calling
this, or checking beforehand.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D135668
Most of the paths to this never passed nullptr intentionally. Those
that possibly could have were assuming it was not null elsehwere,
so would have crashed.
I've added asserts in those cases.
At least one case was relying on GetAsMemoryData to return an error
when it was given nullptr. So I've hoisted that error setting code
out into the caller.
Depends on D134963
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D134965
Use our "rich error" facility to propagate error reported by the stub to
the user. lldb-server reports rich launch errors as of D133352.
To make this easier to implement, and reduce code duplication, I have
moved the vRun/A/qLaunchSuccess handling into a single
GDBRemoteCommunicationClient function.
Differential Revision: https://reviews.llvm.org/D134754
