Over the past day or so, i've took a large swing at our tests,
and reduced the number of tests that were still using the old syntax
from ~1800 to just 200.
Left to handle: (as it is seen in this patch)
* Transforms/LSR
* Transforms/CGP
* Transforms/TypePromotion
* Transforms/HardwareLoops
* Analysis/*
* some misc.
I think this is the right point to start actively refusing
to honor the old syntax, except for the old tests,
to prevent the old syntax from creeping back in.
Thus, let's add temporary default-off flag,
and if it is not passed refuse to accept old syntax.
The tests that still need porting are annotated with this flag.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D139647
Use shufflevector to do the subvector extracts. This allows a lot more
load merging on AMDGPU and also on NVPTX when <2 x half> is involved.
Differential Revision: https://reviews.llvm.org/D117219
Rather than checking for nounwind in particular, make sure the
instruction is guaranteed to transfer execution, which will also
handle non-willreturn calls correctly.
Fixes https://github.com/llvm/llvm-project/issues/52950.
This patch is changing the InsertElement's placeholder to poison without changing the LSV's behavior.
Regardless of whether `StoreTy` is FixedVectorType or not, the poison value will be overwritten with a different value.
Therefore, whether the InsertElement's placeholder is poison or undef will not affect the result of the program.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D111005
Currently, opaque pointers are supported in two forms: The
-force-opaque-pointers mode, where all pointers are opaque and
typed pointers do not exist. And as a simple ptr type that can
coexist with typed pointers.
This patch removes support for the mixed mode. You either get
typed pointers, or you get opaque pointers, but not both. In the
(current) default mode, using ptr is forbidden. In -opaque-pointers
mode, all pointers are opaque.
The motivation here is that the mixed mode introduces additional
issues that don't exist in fully opaque mode. D105155 is an example
of a design problem. Looking at D109259, it would probably need
additional work to support mixed mode (e.g. to generate GEPs for
typed base but opaque result). Mixed mode will also end up
inserting many casts between i8* and ptr, which would require
significant additional work to consistently avoid.
I don't think the mixed mode is particularly valuable, as it
doesn't align with our end goal. The only thing I've found it to
be moderately useful for is adding some opaque pointer tests in
between typed pointer tests, but I think we can live without that.
Differential Revision: https://reviews.llvm.org/D109290
The load store vectorizer currently uses isNoAlias() to determine
whether memory-accessing instructions should prevent vectorization.
However, this only works for loads and stores. Additionally, a
couple of intrinsics like assume are special-cased to be ignored.
Instead use getModRefInfo() to generically determine whether the
instruction accesses/modifies the relevant location. This will
automatically handle all inaccessiblememonly intrinsics correctly
(as well as other calls that don't modref for other reasons).
This requires generalizing the code a bit, as it was previously
only considering loads and stored in particular.
Differential Revision: https://reviews.llvm.org/D109020
First we refactor the code which does no wrapping add sequences
match: we need to allow different operand orders for
the key add instructions involved in the match.
Then we use the refactored code trying 4 variants of matching operands.
Originally the code relied on the fact that the matching operands
of the two last add instructions of memory index calculations
had the same LHS argument. But which operand is the same
in the two instructions is actually not essential, so now we allow
that to be any of LHS or RHS of each of the two instructions.
This increases the chances of vectorization to happen.
Reviewed By: volkan
Differential Revision: https://reviews.llvm.org/D103912
This change enables cases for which the index value for the first
load/store instruction in a pair could be a function argument. This
allows using llvm.assume to provide known bits information in such
cases.
Patch by Viacheslav Nikolaev. Thanks!
Differential Revision: https://reviews.llvm.org/D101680
This commit copies existing tests at llvm/Transforms and replaces
'insertelement undef' in those files with 'insertelement poison'.
(see https://reviews.llvm.org/D93586)
Tests listed using this script:
grep -R -E '^[^;]*insertelement <.*> undef,' . | cut -d":" -f1 | uniq |
wc -l
Tests updated:
file_org=llvm/test/Transforms/$1
file=${file_org%.ll}-inseltpoison.ll
cp $file_org $file
sed -i -E 's/^([^;]*)insertelement <(.*)> undef/\1insertelement <\2> poison/g' $file
head -1 $file | grep "Assertions have been autogenerated by utils/update_test_checks.py" -q
if [ "$?" == 1 ]; then
echo "$file : should be manually updated"
# I manually updated the script
exit 1
fi
python3 ./llvm/utils/update_test_checks.py --opt-binary=./build-releaseassert/bin/opt $file
Adjust SITargetLowering::allowsMisalignedMemoryAccessesImpl for
unaligned flat scratch support. Mostly needed for global isel.
Differential Revision: https://reviews.llvm.org/D93669
Explicitly opt-out llvm/test/Transforms/Attributor.
Verified by flipping the default value of allow-unused-prefixes and
observing that none of the failures were under llvm/test/Transforms.
Differential Revision: https://reviews.llvm.org/D92404
Features UnalignedBufferAccess and UnalignedDSAccess are now used to determine
whether hardware supports such access.
UnalignedAccessMode should be used to enable them.
hasUnalignedBufferAccessEnabled() and hasUnalignedDSAccessEnabled() can be
now used to quickly check both.
Differential Revision: https://reviews.llvm.org/D84522
Adjust alignment requirements for ds_read/write_b96/b128.
GFX9 and onwards allow misaligned access for reads and writes but only if
SH_MEM_CONFIG.alignment_mode allows it.
UnalignedDSAccess is set on GCN subtargets from GFX9 onward to let us know if we
can relax alignment requirements.
UnalignedAccessMode acts similary to UnalignedBufferAccess for DS instructions
but only from GFX9 onward and is supposed to match alignment_mode. By default
alignment of 4 is required.
Differential Revision: https://reviews.llvm.org/D82788
Summary: To match NewPM name. Also the new name is clearer and more consistent.
Subscribers: jvesely, nhaehnle, hiraditya, asbirlea, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84542
Summary:
Currently when --passes is used, any passes specified via -foo are
ignored. Explicitly bail out when that happens.
This requires changing some tests. Most were straightforward, but
codegenprepare-produced-address-math.ll is tricky. One of its RUNs runs
CodeGenPrepare. I tried porting CodeGenPrepare to the NPM, but ended up
getting stuck when I needed a TargetMachine. NPM doesn't have support
for MachineFunctions yet. So I just deleted that RUN line, since it was
mass-added in https://reviews.llvm.org/D54848 and is likely not that
useful.
Reviewers: echristo, hans
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82271
If both OpA and OpB is an add with NSW/NUW and with the same LHS operand,
we can guarantee that the transformation is safe if we can prove that OpA
won't overflow when IdxDiff added to the RHS of OpA.
Review: https://reviews.llvm.org/D79817
This is apparently worse than 1-byte alignment. This does not attempt
to decompose 2-byte aligned wide stores, but will stop trying to
produce them.
Also fix bug in LoadStoreVectorizer which was decreasing the alignment
and vectorizing stack accesses. It was assuming a stack object was an
alloca that could have its base alignment changed, which is not true
if the pointer is derived from a function argument.
Added code to truncate or shrink offsets so that we can continue
base pointer search if size has changed along the way.
Differential Revision: https://reviews.llvm.org/D65612
llvm-svn: 367646
The previous change to fix crash in the vectorizer introduced
performance regressions. The condition to preserve pointer
address space during the search is too tight, we only need to
match the size.
Differential Revision: https://reviews.llvm.org/D65600
llvm-svn: 367624
When vectorizer strips pointers it can eventually end up with
pointers of two different sizes, then SCEV will crash.
Differential Revision: https://reviews.llvm.org/D65480
llvm-svn: 367443
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
If the alignment is at least 4, this should report true.
Something still seems off with how < 4-byte types are
handled here though.
Fixing this seems to change how some combines get
to where they get, but somehow isn't changing the net
result.
llvm-svn: 342879
This was checking the hardcoded address space 0 for the stack.
Additionally, this should be checking for legality with
the adjusted alignment, so defer the alignment check.
Also try to split if the unaligned access isn't allowed.
llvm-svn: 342442
This reverts r319889.
Unfortunately, wrapping flags are not a part of SCEV's identity (they
do not participate in computing a hash value or in equality
comparisons) and in fact they could be assigned after the fact w/o
rebuilding a SCEV.
Grep for const_cast's to see quite a few of examples, apparently all
for AddRec's at the moment.
So, if 2 expressions get built in 2 slightly different ways: one with
flags set in the beginning, the other with the flags attached later
on, we may end up with 2 expressions which are exactly the same but
have their operands swapped in one of the commutative N-ary
expressions, and at least one of them will have "sorted by complexity"
invariant broken.
2 identical SCEV's won't compare equal by pointer comparison as they
are supposed to.
A real-world reproducer is added as a regression test: the issue
described causes 2 identical SCEV expressions to have different order
of operands and therefore compare not equal, which in its turn
prevents LoadStoreVectorizer from vectorizing a pair of consecutive
loads.
On a larger example (the source of the test attached, which is a
bugpoint) I have seen even weirder behavior: adding a constant to an
existing SCEV changes the order of the existing terms, for instance,
getAddExpr(1, ((A * B) + (C * D))) returns (1 + (C * D) + (A * B)).
Differential Revision: https://reviews.llvm.org/D40645
llvm-svn: 340777
In some cases LSV sees (load/store _ (select _ <pointer expression>
<pointer expression>)) patterns in input IR, often due to sinking and
other forms of CFG simplification, sometimes interspersed with
bitcasts and all-constant-indices GEPs. With this
patch`areConsecutivePointers` method would attempt to handle select
instructions. This leads to an increased number of successful
vectorizations.
Technically, select instructions could appear in index arithmetic as
well, however, we don't see those in our test suites / benchmarks.
Also, there is a lot more freedom in IR shapes computing integral
indices in general than in what's common in pointer computations, and
it appears that it's quite unreliable to do anything short of making
select instructions first class citizens of Scalar Evolution, which
for the purposes of this patch is most definitely an overkill.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D49428
llvm-svn: 337965
if the top level addition in (D + (C-D + x + ...)) could be proven to
not wrap, where the choice of D also maximizes the number of trailing
zeroes of (C-D + x + ...), ensuring homogeneous behaviour of the
transformation and better canonicalization of such expressions.
This enables better canonicalization of expressions like
1 + zext(5 + 20 * %x + 24 * %y) and
zext(6 + 20 * %x + 24 * %y)
which get both transformed to
2 + zext(4 + 20 * %x + 24 * %y)
This pattern is common in address arithmetics and the transformation
makes it easier for passes like LoadStoreVectorizer to prove that 2 or
more memory accesses are consecutive and optimize (vectorize) them.
Reviewed By: mzolotukhin
Differential Revision: https://reviews.llvm.org/D48853
llvm-svn: 337859
This reapplies commit r337489 reverted by r337541
Additionally, this commit contains a speculative fix to the issue reported in r337541
(the report does not contain an actionable reproducer, just a stack trace)
llvm-svn: 337606
