This change initializes the members TSI, LI, DT, PSI, and ORE pointer feilds of the SelectOptimize class to nullptr.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D148303
With D68945, more DBG_VALUEs were created without the indirect operand,
instead relying on OP_deref to accomplish the same effect.
At the time, however, we were not able to handle arbitrary expressions
in combination with OP_LLVM_entry_value, so D71416 prevented the use of
such operation in the presence of expressions.
As per the comment in DIExpression::isValid, "we support only entry
values of a simple register location." As such, a simple deref operation
should be supported. In fact, D80345 added support for indirect
DBG_VALUEs.
Taken the patches above into consideration, this commit relaxes the
restrictions on which expressions are allowed for entry value
candidates: the expression must be either empty or a single dereference
operator.
This patch is useful for D141381, which adds support for storing the
address of ABI-indirect parameters on the stack.
Depends on D142160
Differential Revision: https://reviews.llvm.org/D142654
This adds the missing handling for defs for target index operands, as is
already done for registers.
There are two kinds of target indices: local indices and stack operands.
- Locals are something similar to registers in Wasm-land. For local
indices, we can check for local-defining instructions (`local.set` or
`local.tee`).
- Wasm is a stack machine, so we have values in certain Wasm value stack
location, which change when Wasm instructions produce or consume
values. So basically any value-producing instrucion, i.e., instruction
with defs, can change values in the Wasm stack. But I think we don't
need to worry about this here, because `WebAssemblyDebugFixup`, which
runs right before this analysis, makes sure to insert terminating
`DBG_VALUE $noreg` instructions whenever a stack value gets popped.
After `WebAssemblyDebugFixup`, there shouldn't be any `DBG_VALUE`s for
stack operands that don't have a terminating `DBG_VALUE $noreg` within
the same BB.
So this CL only works on `DBG_VALUE`s for locals. When we encounter a
`local.set` or `local.tee` instructions, we delete `DBG_VALUE`s for
those target index locations from the open range set, so they will not
be availble in `OutLocs`. For example,
```
bb.0:
successors: %bb.1
DBG_VALUE target-index(wasm-local) + 2, $noreg, "var", ...
...
local.set 2 ...
bb.1:
; predecessors: %bb.0
; We shouldn't add `DBG_VALUE target (wasm-local) + 2 here because
; it was killed by 'local.set' in bb.0
```
After disabling register coalescing at -O1, the average PC ranges
covered for Emscripten core benchmarks is currently 20.6% in the LLVM
tot. After applying D138943 and this CL, the coverage goes up to 57%.
This also enables LiveDebugValues analysis in the Wasm pipeline by
default.
Reviewed By: dschuff, jmorse
Differential Revision: https://reviews.llvm.org/D140373
This enables `LiveDebugValues` analysis for Wasm. `DBG_VALUE`s expire at
the end of a BB, and this is the analysis extends their lifetime when
possible, greatly increasing the coverage of variable debug info.
Specifically, this removes the current constraint that this analysis is
only used with physical registers, which was first introduced in D18421,
because Wasm uses only virtual registers. I don't think there's anything
inherent in this analysis that only applies to physical registers; it
was just because all targets using this analysis ran this at the end of
their compiliation pipeline, at which point all their vregs had been
allocated, and Wasm's debug info infrastructure was not really set up
yet, so it was not using it.
This adds supports to Wasm-specific target-index operands, defined in
2166d9529a/llvm/lib/Target/WebAssembly/WebAssembly.h (L87-L100).
Among these, `TI_LOCAL`, `TI_LOCAL_INDIRECT`, and `TI_OPERAND_STACK` are
used by Wasm `DBG_VALUE` instructions.
This does not yet handle mutable target indices, i.e., this does not
terminate a `DBG_VALUE` for a local index when we encounter a new
`local.set` or `local.tee`. It will be implemented as a follow-up.
Reviewed By: dschuff, jmorse
Differential Revision: https://reviews.llvm.org/D138943
Following support from the previous patches in this stack being added for
variadic DBG_INSTR_REFs to exist, this patch modifies LiveDebugValues to
handle those instructions. Support already exists for DBG_VALUE_LISTs, which
covers most of the work needed to handle these instructions; this patch only
modifies the transferDebugInstrRef function to correctly track them.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D133927
Prior to this patch, variadic DIExpressions (i.e. ones that contain
DW_OP_LLVM_arg) could only be created by salvaging debug values to create
stack value expressions, resulting in a DBG_VALUE_LIST being created. As of
the previous patch in this patch stack, DBG_INSTR_REF's syntax has been
changed to match DBG_VALUE_LIST in preparation for supporting variadic
expressions. This patch adds some minor changes needed to allow variadic
expressions that aren't stack values to exist, and allows variadic expressions
that are trivially reduceable to non-variadic expressions to be handled
similarly to non-variadic expressions.
Reviewed by: jmorse
Differential Revision: https://reviews.llvm.org/D133926
This patch makes two notable changes to the MIR debug info representation,
which result in different MIR output but identical final DWARF output (NFC
w.r.t. the full compilation). The two changes are:
* The introduction of a new MachineOperand type, MO_DbgInstrRef, which
consists of two unsigned numbers that are used to index an instruction
and an output operand within that instruction, having a meaning
identical to first two operands of the current DBG_INSTR_REF
instruction. This operand is only used in DBG_INSTR_REF (see below).
* A change in syntax for the DBG_INSTR_REF instruction, shuffling the
operands to make it resemble DBG_VALUE_LIST instead of DBG_VALUE,
and replacing the first two operands with a single MO_DbgInstrRef-type
operand.
This patch is the first of a set that will allow DBG_INSTR_REF
instructions to refer to multiple machine locations in the same manner
as DBG_VALUE_LIST.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D129372
Currently the instruction referencing live debug values has 3 separate
places where we iterate over all known locations to find the best machine
location for a set of values at a given point in the program. Each of these
places has an implementation of this check, and one of them has slightly
different logic to the others. This patch moves the check for the "quality"
of a machine location into a separate function, which also avoids repeatedly
calling expensive functions, giving a slight performance improvement.
Differential Revision: https://reviews.llvm.org/D140412
This patch adds a new function that can be used to check all the
properties, other than the machine values, of a pair of debug values for
equivalence. This is done by folding the "directness" into the
expression, converting the expression to variadic form if it is not
already in that form, and then comparing directly. In a few places which
check whether two debug values are identical to see if their ranges can
be merged, this function will correctly identify cases where two debug
values are expressed differently but have the same meaning, allowing
those ranges to be correctly merged.
Differential Revision: https://reviews.llvm.org/D136173
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This was done as a test for D137302 and it makes sense to push these changes
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D137493
This patch builds on prior support patches to enable support for
variadic debug values in InstrRefLDV, allowing DBG_VALUE_LISTs to
have their ranges extended.
Differential Revision: https://reviews.llvm.org/D128212
This patch adds the last of the changes required to enable
DBG_VALUE_LIST handling in InstrRefLDV, handling variadic debug values
during the transfer tracking step. Most of the changes are fairly
straightforward, and based around tracking multiple locations per
variable in TransferTracker::VLocTracker.
Differential Revision: https://reviews.llvm.org/D128211
In preparation for supporting DBG_VALUE_LIST in InstrRefLDV, this patch
adds the logic for emitting DBG_VALUE_LIST instructions from
InstrRefLDV. The logical changes here are fairly simple, with the main
change being that instead of directly prepending offsets to the DIExpr,
we use appendOpsToArg to modify the expression for individual debug
operands in the expression. The function emitLoc is also changed to take
a list of debug ops, with an empty list meaning an undef value.
Differential Revision: https://reviews.llvm.org/D128209
In preparation for adding support for DBG_VALUE_LIST instructions in
InstrRefLDV, this patch updates the logic for joining variables at block
joins to support joining variables that use multiple debug operands.
This is one of the more meaty "logical" changes, although the line count
isn't too high - this changes pickVPHILoc to find a valid joined
location for every operand, with part of the function being split off
into pickValuePHILoc which finds a location for a single operand.
Differential Revision: https://reviews.llvm.org/D128180
This patch fixes:
llvm/lib/CodeGen/LiveDebugValues/InstrRefBasedImpl.h:330:5: error:
anonymous types declared in an anonymous union are an extension
[-Werror,-Wnested-anon-types]
In preparation for allowing InstrRefBasedLDV to handle DBG_VALUE_LIST,
this patch updates the internal representation that it uses to represent
debug values to store a list of values. This is one of the more
significant changes in terms of line count, but is fairly simple and
should not affect the output of this pass.
Differential Revision: https://reviews.llvm.org/D128177
Currently, InstrRefLDV only handles DBG_VALUE instructions, not
DBG_VALUE_LIST, and as a result of this it handles these instructions
using functions that only work for that type of debug value, i.e. using
getOperand(0) to get the debug operand. This patch changes this to use
the generic debug value functions, such as getDebugOperand and
isDebugOffsetImm, as well as adding an IsVariadic field to the
DbgValueProperties class and a few other minor changes to acknowledge
DBG_VALUE_LISTs. Note that this patch does not add support for
DBG_VALUE_LIST here, but is a precursor to other patches that do add
that support.
Differential Revision: https://reviews.llvm.org/D128174
In the InstrRefBasedImpl for LiveDebugValues, we attempt to propagate
debug values through basic blocks in part by checking to see whether all
a variable's incoming debug values to a BB "agree", i.e. whether their
properties match and they refer to the same underlying value.
Prior to this patch, the check for agreement between incoming values
relied on exact equality, which meant that a VPHI and a Def DbgValue
that referred to the same underlying value would be seen as disagreeing.
This patch changes this behaviour to treat them as referring to the same
value, allowing the shared value to propagate into the BB.
Differential Revision: https://reviews.llvm.org/D125953
This is a follow-up patch to D130999. In the test, the MIR contains an
unreachable MBB but the code attempts to look it up in MLocs. This
patch fixes this issue by checking for the default-constructed value.
rdar://97226240
Differential Revision: https://reviews.llvm.org/D131453
The testcase was delta-reduced from an LTO build with sanitizer
coverage and the MIR tail duplication pass caused a machine basic
block to become unreachable in MIR. This caused the MBB to be invisible
to the reverse post-order traversal used to initialize the MBB <->
RPONumber lookup tables.
rdar://97226240
Differential Revision: https://reviews.llvm.org/D130999
llvm::sort is beneficial even when we use the iterator-based overload,
since it can optionally shuffle the elements (to detect
non-determinism). However llvm::sort is not usable everywhere, for
example, in compiler-rt.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D130406
Currently, an error exists when InstrRefBasedLDV observes transfers of
variables across copies, which causes it to lose track of variables
under certain circumstances, resulting in shorter lifetimes for those
variables as LDV gives up searching for live locations for them. This
patch fixes this issue by storing the currently tracked values in
the destination first, then updating them manually later without
clobbering or assigning them the wrong value.
Differential Revision: https://reviews.llvm.org/D128101
This is a re-apply of D123599, which was reverted in 4fe2ab5279408, now
with a more appropriate assertion. Original commit message follow:
InstrRefBasedLDV can track and describe variable values that are spilt to
the stack -- however it does not current describe the size of the value on
the stack. This can cause uninitialized bytes to be read from the stack if
a small register is spilt for a larger variable, or theoretically on
big-endian machines if a large value on the stack is used for a small
variable.
Fix this by using DW_OP_deref_size to specify the amount of data to load
from the stack, if there's any possibility for ambiguity. There are a few
scenarios where this can be omitted (such as when using DW_OP_piece and a
non-DW_OP_stack_value location), see deref-spills-with-size.mir for an
explicit table of inputs flavours and output expressions.
Differential Revision: https://reviews.llvm.org/D123599
There are many more instances of this pattern, but I chose to limit this change to .rst files (docs), anything in libcxx/include, and string literals. These have the highest chance of being seen by end users.
Reviewed By: #libc, Mordante, martong, ldionne
Differential Revision: https://reviews.llvm.org/D124708
This reverts commit a15b66e76d1ecff625a4bbb4a46ff83a43138f49.
This causes linker to crash at assertion: `Assertion failed: !Expr->isComplex(), file C:\b\s\w\ir\cache\builder\src\third_party\llvm\llvm\lib\CodeGen\LiveDebugValues\InstrRefBasedImpl.cpp, line 907`.
InstrRefBasedLDV can track and describe variable values that are spilt to
the stack -- however it does not current describe the size of the value on
the stack. This can cause uninitialized bytes to be read from the stack if
a small register is spilt for a larger variable, or theoretically on
big-endian machines if a large value on the stack is used for a small
variable.
Fix this by using DW_OP_deref_size to specify the amount of data to load
from the stack, if there's any possibility for ambiguity. There are a few
scenarios where this can be omitted (such as when using DW_OP_piece and a
non-DW_OP_stack_value location), see deref-spills-with-size.mir for an
explicit table of inputs flavours and output expressions.
Differential Revision: https://reviews.llvm.org/D123599
This was reverted twice, in 987cd7c3ed75b and 13815e8cbf8d4. The latter
stemed from not accounting for rare register classes in a pre-allocated
array, and the former from an array not being completely initialized,
leading to asan complaining.
