The type of a function is nowadays just an opaque pointer, which is not
helpful when analyzing FastISel misses. Instead print the actual
function type of the function.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D147716
This reverts commit db6a979ae82410e42430e47afa488936ba8e3025.
Reland D102817 without any change. The previous revert was a mistake.
Differential Revision: https://reviews.llvm.org/D102817
Use RawLocationWrapper rather than a Value to represent the location operand(s)
so that it's possible to represent multiple location
operands. AssignmentTrackingAnalysis still converts variadic debug intrinsics
to kill locations so this patch is NFC.
Reviewed By: StephenTozer
Differential Revision: https://reviews.llvm.org/D145911
Switch DAGISel over to UniformityAnalysis, which was one of the last remaining users of the DivergenceAnalysis.
No explosions seen during internal testing so this looks like a smooth transition.
Reviewed By: sameerds
Differential Revision: https://reviews.llvm.org/D145918
Switch DAGISel over to UniformityAnalysis, which was one of the last remaining users of the DivergenceAnalysis.
No explosions seen during internal testing so this looks like a smooth transition.
Reviewed By: sameerds
Differential Revision: https://reviews.llvm.org/D145918
Doing so makes it easier to do printf style debugging in idiomatic manner. I followed the code structure of Value with only the definition of dump being #ifdef out in non-debug builds. Not sure if this is the "right" option; we don't seem to have any single consistent scheme on how dump is handled.
Note: This is a follow up to D143454 which did the same for EVT.
Differential Revision: https://reviews.llvm.org/D143511
Computing EH-related information was only relevant for analysis passes so far. Lifting it to IR will allow the IR Verifier to calculate EH funclet coloring and validate funclet operand bundles in a follow-up step.
Reviewed By: rnk, compnerd
Differential Revision: https://reviews.llvm.org/D138122
Add a flag state (and a MIR key) to MachineFunctions indicating whether they
contain instruction referencing debug-info or not. Whether DBG_VALUEs or
DBG_INSTR_REFs are used needs to be determined by LiveDebugValues at least, and
using the current optimisation level as a proxy is proving unreliable.
Test updates are purely adding the flag to tests, in a couple of cases it
involves separating out VarLocBasedLDV/InstrRefBasedLDV tests into separate
files, as they can no longer share the same input.
Differential Revision: https://reviews.llvm.org/D141387
Remove LLVM flag -experimental-assignment-tracking. Assignment tracking is
still enabled from Clang with the command line -Xclang
-fexperimental-assignment-tracking which tells Clang to ask LLVM to run the
pass declare-to-assign. That pass converts conventional debug intrinsics to
assignment tracking metadata. With this patch it now also sets a module flag
debug-info-assignment-tracking with the value `i1 true` (using the flag conflict
rule `Max` since enabling assignment tracking on IR that contains only
conventional debug intrinsics should cause no issues).
Update the docs and tests too.
Reviewed By: CarlosAlbertoEnciso
Differential Revision: https://reviews.llvm.org/D142027
This is a follow up to D141317 which extends the common code to include a target independent pseudo instruction. This is an alternative to (subset of) D92842 which tries to be as close to NFC as possible.
A couple things to call out.
* The test change in X86 is because we loose the scheduling information on the instruction. However, I think this was actually a bug in x86 since no instruction was emitted for a MEMBARRIER. Concluding that a meta instruction has latency just seems wrong?
* I intentionally left some parts of D92842 out. Specifically, several of the changes in the X86 code (data independence and outlining) appear functional, and likely worthy of their own review. Additionally, I'm not handling ARM/AArch64 at all. Those targets need the ordering whereas none of the others do. I want to get this in and tested before retrofitting in ordering to support those targets.
Differential Revision: https://reviews.llvm.org/D141408
This patch makes two notable changes to the MIR debug info representation,
which result in different MIR output but identical final DWARF output (NFC
w.r.t. the full compilation). The two changes are:
* The introduction of a new MachineOperand type, MO_DbgInstrRef, which
consists of two unsigned numbers that are used to index an instruction
and an output operand within that instruction, having a meaning
identical to first two operands of the current DBG_INSTR_REF
instruction. This operand is only used in DBG_INSTR_REF (see below).
* A change in syntax for the DBG_INSTR_REF instruction, shuffling the
operands to make it resemble DBG_VALUE_LIST instead of DBG_VALUE,
and replacing the first two operands with a single MO_DbgInstrRef-type
operand.
This patch is the first of a set that will allow DBG_INSTR_REF
instructions to refer to multiple machine locations in the same manner
as DBG_VALUE_LIST.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D129372
This error was introduced in 1d1de7467c32d52926ca56b9167a2c65c451ecfa (by me)
about 1 month ago. Found while testing the D140901 patch stack.
Reviewed By: jryans
Differential Revision: https://reviews.llvm.org/D141052
value() has undesired exception checking semantics and calls
__throw_bad_optional_access in libc++. Moreover, the API is unavailable without
_LIBCPP_NO_EXCEPTIONS on older Mach-O platforms (see
_LIBCPP_AVAILABILITY_BAD_OPTIONAL_ACCESS).
This fixes LLVMMIRParser, LLVMGlobalISel, LLVMAsmPrinter, LLVMSelectionDAG.
Previously we had a shared ID in SelectionDAGISel. AMDGPU has an
initializePass function for its subclass of SelectionDAGISel. No
other target does.
This causes all target specific SelectionDAGISel passes to be known
as "amdgpu-isel".
I'm not sure what would happen if another target tried to implement
an initializePass function too since the ID is already claimed.
This patch gives all targets their own ID and passes it down to
SelectionDAGISel constructor to MachineFunctionPass's constructor.
Unfortunately, I think this causes most targets to lose
print-before/after-all support for their SelectionDAGISel pass.
And they probably no longer support start/stop-before/after. We
can add initializePass functions to fix this as a follow up. NOTE:
This was probably also broken if the AMDGPU target isn't compiled in.
Step 1 to fixing PR59538.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D140161
The Assignment Tracking debug-info feature is outlined in this RFC:
https://discourse.llvm.org/t/
rfc-assignment-tracking-a-better-way-of-specifying-variable-locations-in-ir
Add initial revision of assignment tracking analysis pass
---------------------------------------------------------
This patch squashes five individually reviewed patches into one:
#1https://reviews.llvm.org/D136320#2https://reviews.llvm.org/D136321#3https://reviews.llvm.org/D136325#4https://reviews.llvm.org/D136331#5https://reviews.llvm.org/D136335
Patch #1 introduces 2 new files: AssignmentTrackingAnalysis.h and .cpp. The
two subsequent patches modify those files only. Patch #4 plumbs the analysis
into SelectionDAG, and patch #5 is a collection of tests for the analysis as
a whole.
The analysis was broken up into smaller chunks for review purposes but for the
most part the tests were written using the whole analysis. It would be possible
to break up the tests for patches #1 through #3 for the purpose of landing the
patches seperately. However, most them would require an update for each
patch. In addition, patch #4 - which connects the analysis to SelectionDAG - is
required by all of the tests.
If there is build-bot trouble, we might try a different landing sequence.
Analysis problem and goal
-------------------------
Variables values can be stored in memory, or available as SSA values, or both.
Using the Assignment Tracking metadata, it's not possible to determine a
variable location just by looking at a debug intrinsic in
isolation. Instructions without any metadata can change the location of a
variable. The meaning of dbg.assign intrinsics changes depending on whether
there are linked instructions, and where they are relative to those
instructions. So we need to analyse the IR and convert the embedded information
into a form that SelectionDAG can consume to produce debug variable locations
in MIR.
The solution is a dataflow analysis which, aiming to maximise the memory
location coverage for variables, outputs a mapping of instruction positions to
variable location definitions.
API usage
---------
The analysis is named `AssignmentTrackingAnalysis`. It is added as a required
pass for SelectionDAGISel when assignment tracking is enabled.
The results of the analysis are exposed via `getResults` using the returned
`const FunctionVarLocs *`'s const methods:
const VarLocInfo *single_locs_begin() const;
const VarLocInfo *single_locs_end() const;
const VarLocInfo *locs_begin(const Instruction *Before) const;
const VarLocInfo *locs_end(const Instruction *Before) const;
void print(raw_ostream &OS, const Function &Fn) const;
Debug intrinsics can be ignored after running the analysis. Instead, variable
location definitions that occur between an instruction `Inst` and its
predecessor (or block start) can be found by looping over the range:
locs_begin(Inst), locs_end(Inst)
Similarly, variables with a memory location that is valid for their lifetime
can be iterated over using the range:
single_locs_begin(), single_locs_end()
Further detail
--------------
For an explanation of the dataflow implementation and the integration with
SelectionDAG, please see the reviews linked at the top of this commit message.
Reviewed By: jmorse
This patch is the Part-2 (BE LLVM) implementation of HW Exception handling.
Part-1 (FE Clang) was committed in 797ad701522988e212495285dade8efac41a24d4.
This new feature adds the support of Hardware Exception for Microsoft Windows
SEH (Structured Exception Handling).
Compiler options:
For clang-cl.exe, the option is -EHa, the same as MSVC.
For clang.exe, the extra option is -fasync-exceptions,
plus -triple x86_64-windows -fexceptions and -fcxx-exceptions as usual.
NOTE:: Without the -EHa or -fasync-exceptions, this patch is a NO-DIFF change.
The rules for C code:
For C-code, one way (MSVC approach) to achieve SEH -EHa semantic is to follow three rules:
First, no exception can move in or out of _try region., i.e., no "potential faulty
instruction can be moved across _try boundary.
Second, the order of exceptions for instructions 'directly' under a _try must be preserved
(not applied to those in callees).
Finally, global states (local/global/heap variables) that can be read outside of _try region
must be updated in memory (not just in register) before the subsequent exception occurs.
The impact to C++ code:
Although SEH is a feature for C code, -EHa does have a profound effect on C++
side. When a C++ function (in the same compilation unit with option -EHa ) is
called by a SEH C function, a hardware exception occurs in C++ code can also
be handled properly by an upstream SEH _try-handler or a C++ catch(...).
As such, when that happens in the middle of an object's life scope, the dtor
must be invoked the same way as C++ Synchronous Exception during unwinding process.
Design:
A natural way to achieve the rules above in LLVM today is to allow an EH edge
added on memory/computation instruction (previous iload/istore idea) so that
exception path is modeled in Flow graph preciously. However, tracking every
single memory instruction and potential faulty instruction can create many
Invokes, complicate flow graph and possibly result in negative performance
impact for downstream optimization and code generation. Making all
optimizations be aware of the new semantic is also substantial.
This design does not intend to model exception path at instruction level.
Instead, the proposed design tracks and reports EH state at BLOCK-level to
reduce the complexity of flow graph and minimize the performance-impact on CPP
code under -EHa option.
One key element of this design is the ability to compute State number at
block-level. Our algorithm is based on the following rationales:
A _try scope is always a SEME (Single Entry Multiple Exits) region as jumping
into a _try is not allowed. The single entry must start with a seh_try_begin()
invoke with a correct State number that is the initial state of the SEME.
Through control-flow, state number is propagated into all blocks. Side exits
marked by seh_try_end() will unwind to parent state based on existing SEHUnwindMap[].
Note side exits can ONLY jump into parent scopes (lower state number).
Thus, when a block succeeds various states from its predecessors, the lowest
State triumphs others. If some exits flow to unreachable, propagation on those
paths terminate, not affecting remaining blocks.
For CPP code, object lifetime region is usually a SEME as SEH _try.
However there is one rare exception: jumping into a lifetime that has Dtor but
has no Ctor is warned, but allowed:
Warning: jump bypasses variable with a non-trivial destructor
In that case, the region is actually a MEME (multiple entry multiple exits).
Our solution is to inject a eha_scope_begin() invoke in the side entry block to
ensure a correct State.
Implementation:
Part-1: Clang implementation (already in):
Please see commit 797ad701522988e212495285dade8efac41a24d4).
Part-2 : LLVM implementation described below.
For both C++ & C-code, the state of each block is computed at the same place in
BE (WinEHPreparing pass) where all other EH tables/maps are calculated.
In addition to _scope_begin & _scope_end, the computation of block state also
rely on the existing State tracking code (UnwindMap and InvokeStateMap).
For both C++ & C-code, the state of each block with potential trap instruction
is marked and reported in DAG Instruction Selection pass, the same place where
the state for -EHsc (synchronous exceptions) is done.
If the first instruction in a reported block scope can trap, a Nop is injected
before this instruction. This nop is needed to accommodate LLVM Windows EH
implementation, in which the address in IPToState table is offset by +1.
(note the purpose of that is to ensure the return address of a call is in the
same scope as the call address.
The handler for catch(...) for -EHa must handle HW exception. So it is
'adjective' flag is reset (it cannot be IsStdDotDot (0x40) that only catches
C++ exceptions).
Suppress push/popTerminate() scope (from noexcept/noTHrow) so that HW
exceptions can be passed through.
Original llvm-dev [RFC] discussions can be found in these two threads below:
https://lists.llvm.org/pipermail/llvm-dev/2020-March/140541.htmlhttps://lists.llvm.org/pipermail/llvm-dev/2020-April/141338.html
Differential Revision: https://reviews.llvm.org/D102817/new/
This patch renames FuncletPadInst::getNumArgOperands to arg_size for
consistency with CallBase, where getNumArgOperands was removed in
favor of arg_size in commit 3e1c787b3160bed4146d3b2b5f922aeed3caafd7
Differential Revision: https://reviews.llvm.org/D136048
In Linux PIC model, there are 4 cases about value/label addressing:
Case 1: Function call or Label jmp inside the module.
Case 2: Data access (such as global variable, static variable) inside the module.
Case 3: Function call or Label jmp outside the module.
Case 4: Data access (such as global variable) outside the module.
Due to current llvm inline asm architecture designed to not "recognize" the asm
code, there are quite troubles for us to treat mem addressing differently for
same value/adress used in different instuctions.
For example, in pic model, call a func may in plt way or direclty pc-related,
but lea/mov a function adress may use got.
This patch fix/refine the case 1 and case 2 in inline asm.
Due to currently inline asm didn't support jmp the outsider lable, this patch
mainly focus on fix the function call addressing bugs in inline asm.
Reviewed By: Pengfei, RKSimon
Differential Revision: https://reviews.llvm.org/D133914
Add a new entry to SDNodeExtraInfo to propagate PCSections through
SelectionDAG.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D130882
This is similar to D125680, but for llvm.experimental.patchpoint
(instead of llvm.experimental.stackmap).
Differential review: https://reviews.llvm.org/D129268
Prior to this change, live variable operands passed to
`llvm.experimental.stackmap` would be emitted directly to target nodes,
meaning that they don't get legalised. The upshot of this is that LLVM
may crash when encountering illegally typed target nodes.
e.g. https://github.com/llvm/llvm-project/issues/21657
This change introduces a platform independent stackmap DAG node whose
operands are legalised as per usual, thus avoiding aforementioned
crashes.
Note that some kinds of argument are still not handled properly, namely
vectors, structs, and large integers, like i128s. These will need to be
addressed in follow-up changes.
Note also that this does not change the behaviour of
`llvm.experimental.patchpoint`. A follow up change will do the same for
this intrinsic.
Differential review:
https://reviews.llvm.org/D125680
As integer div/rem constant expressions are no longer supported,
constants can no longer trap and are always safe to speculate.
Remove the Constant::canTrap() method and its usages.
Variable locations now come in two modes, instruction referencing and
DBG_VALUE. At -O0 we pick DBG_VALUE to allow fast construction of variable
information. Unfortunately, SelectionDAG edits the optimisation level in
the presence of opt-bisect-limit, meaning different passes have different
views of what variable location mode we should use. That causes assertions
when they're mixed.
This patch plumbs through a boolean in SelectionDAG from start to
instruction emission, so that we don't rely on the current optimisation
level for correctness.
Differential Revision: https://reviews.llvm.org/D123033
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
This is a port of the feature that allows the StackProtector pass to omit
checking code for stack canary checks, and rely on SelectionDAG to do it at a
later stage. The reasoning behind this seems to be to prevent the IR checking
instructions from hindering tail-call optimizations during codegen.
Here we allow GlobalISel to also use that scheme. Doing so requires that we
do some analysis using some factored-out code to determine where to generate
code for the epilogs.
Not every case is handled in this patch since we don't have support for all
targets that exercise different stack protector schemes.
Differential Revision: https://reviews.llvm.org/D98200
Follow up to suggestions in D109103 via hans:
I think UnreachableDefault (or UnreachableFallthrough) would be a
better name now, since it doesn't just omit the range check, it also
omits the last bit test.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D109455
Otherwise we end up with an extra conditional jump, following by an
unconditional jump off the end of a function. ie.
bb.0:
BT32rr ..
JCC_1 %bb.4 ...
bb.1:
BT32rr ..
JCC_1 %bb.2 ...
JMP_1 %bb.3
bb.2:
...
bb.3.unreachable:
bb.4:
...
Should be equivalent to:
bb.0:
BT32rr ..
JCC_1 %bb.4 ...
JMP_1 %bb.2
bb.1:
bb.2:
...
bb.3.unreachable:
bb.4:
...
This can occur since at the higher level IR (Instruction) SwitchInsts
are required to have BBs for default destinations, even when it can be
deduced that such BBs are unreachable.
For most programs, this isn't an issue, just wasted instructions since the
unreachable has been statically proven.
The x86_64 Linux kernel when built with CONFIG_LTO_CLANG_THIN=y fails to
boot though once D106056 is re-applied. D106056 makes it more likely
that correlation-propagation (CVP) can deduce that the default case of
SwitchInsts are unreachable. The x86_64 kernel uses a binary post
processor called objtool, which emits this warning:
vmlinux.o: warning: objtool: cfg80211_edmg_chandef_valid()+0x169: can't
find jump dest instruction at .text.cfg80211_edmg_chandef_valid+0x17b
I haven't debugged precisely why this causes a failure at boot time, but
fixing this very obvious jump off the end of the function fixes the
warning and boot problem.
Link: https://bugs.llvm.org/show_bug.cgi?id=50080
Fixes: https://github.com/ClangBuiltLinux/linux/issues/679
Fixes: https://github.com/ClangBuiltLinux/linux/issues/1440
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D109103
This add support for SjLj using Wasm exception handling instructions:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/exception-handling/Exceptions.md
This does not yet support the mixed use of EH and SjLj within a
function. It will be added in a follow-up CL.
This currently passes all SjLj Emscripten tests for wasm0/1/2/3/s,
except for the below:
- `test_longjmp_standalone`: Uses Node
- `test_dlfcn_longjmp`: Uses NodeRAWFS
- `test_longjmp_throw`: Mixes EH and SjLj
- `test_exceptions_longjmp1`: Mixes EH and SjLj
- `test_exceptions_longjmp2`: Mixes EH and SjLj
- `test_exceptions_longjmp3`: Mixes EH and SjLj
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D108960
InstrRefBasedLDV is marginally slower than VarlocBasedLDV when analysing
optimised code -- however, it's much slower when analysing code compiled
-O0.
To avoid this: don't use instruction referencing for -O0 functions. In the
"pure" case of unoptimised code, this won't really harm the debugging
experience because most variables won't have been promoted off the stack,
so can't go missing. It becomes more complicated when optimised code is
inlined into functions marked optnone; however these are rare, and as -O0
doesn't run many optimisations there should be little damage to the debug
experience as a result.
I've taken the opportunity to refactor testing for instruction-referencing
into a MachineFunction method, which seems the most appropriate place to
put it.
Differential Revision: https://reviews.llvm.org/D108585
When we have a terminator sequence (i.e. a tailcall or return),
MIIsInTerminatorSequence is used to work out where the preceding ABI-setup
instructions end, i.e. the parts that were glued to the terminator
instruction. This allows LLVM to split blocks safely without having to
worry about ABI stuff.
The function only ignores DBG_VALUE instructions, meaning that the two
debug instructions I recently added can end terminator sequences early,
causing various MachineVerifier errors. This patch promotes the test for
debug instructions from "isDebugValue" to "isDebugInstr", thus avoiding any
debug-info interfering with this function.
Differential Revision: https://reviews.llvm.org/D106660
This patch emits DBG_INSTR_REFs for two remaining flavours of variable
locations that weren't supported: copies, and inter-block VRegs. There are
still some locations that must be represented by DBG_VALUE such as
constants, but they're mostly independent of optimisations.
For variable locations that refer to values defined in different blocks,
vregs are allocated before isel begins, but the defining instruction
might not exist until late in isel. To get around this, emit
DBG_INSTR_REFs in a "half done" state, where the first operand refers to a
VReg. Then at the end of isel, patch these back up to refer to
instructions, using the finalizeDebugInstrRefs method.
Copies are something that I complained about the original RFC, and I
really don't want to have to put instruction numbers on copies. They don't
define a value: they move them. To address this isel, salvageCopySSA
interprets:
* COPYs,
* SUBREG_TO_REG,
* Anything that isCopyInstr thinks is a copy.
And follows chains of copies back to the defining instruction that they
read from. This relies on any physical registers that COPYs read being
defined in the same block, or being entry-block arguments. For the former
we can put an instruction number on the defining instruction; for the
latter we can drop a DBG_PHI that reads the incoming value.
Differential Revision: https://reviews.llvm.org/D88896
