As described in [0], this extends IRPGO to support //Temporal Profiling//.
When `-pgo-temporal-instrumentation` is used we add the `llvm.instrprof.timestamp()` intrinsic to the entry of functions which in turn gets lowered to a call to the compiler-rt function `INSTR_PROF_PROFILE_SET_TIMESTAMP()`. A new field in the `llvm_prf_cnts` section stores each function's timestamp. Then in `llvm-profdata merge` we convert these function timestamps into a //trace// and add it to the indexed profile.
Since these traces could significantly increase the profile size, we've added `-max-temporal-profile-trace-length` and `-temporal-profile-trace-reservoir-size` to limit the length of a trace and the number of traces in a profile, respectively.
In a future diff we plan to use these traces to construct an optimized function order to reduce the number of page faults during startup.
Special thanks to Julian Mestre for helping with reservoir sampling.
[0] https://discourse.llvm.org/t/rfc-temporal-profiling-extension-for-irpgo/68068
Reviewed By: snehasish
Differential Revision: https://reviews.llvm.org/D147287
Make the access to profile data going through virtual file system so the
inputs can be remapped. In the context of the caching, it can make sure
we capture the inputs and provided an immutable input as profile data.
Reviewed By: akyrtzi, benlangmuir
Differential Revision: https://reviews.llvm.org/D139052
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
This patch adds support for including binary ids in an indexed profile.
It adds a new field into the header that points to the offset of the
binary id section. The binary id section consists of a size of the
section, and a list of binary ids (if they are present) that consist
of two parts: length and data.
This patch guarantees that indexed profile is backwards compatible
after adding binary ids.
Differential Revision: https://reviews.llvm.org/D135929
This patch adds support for including binary ids in an indexed profile.
It adds a new field into the header that points to the offset of the
binary id section. The binary id section consists of a size of the
section, and a list of binary ids (if they are present) that consist
of two parts: length and data.
This patch guarantees that indexed profile is backwards compatible
after adding binary ids.
Differential Revision: https://reviews.llvm.org/D135929
This was done as a test for D137302 and it makes sense to push these changes
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D137493
This was reverted because it was breaking when targeting Darwin which
tried to export these symbols which are now hidden. It should be safe
to just stop attempting to export these symbols in the clang driver,
though Apple folks will need to change their TAPI allow list described
in the commit where these symbols were originally exported
f538018562
Then reverted again because it broke tests on MacOS, they should be
fixed now.
Bug: https://github.com/llvm/llvm-project/issues/58265
Differential Revision: https://reviews.llvm.org/D135340
This reverts commit 04877284b4592e9286cab43467662c1b4ff81861.
Looks like this is still breaking the test
Profile-x86_64 :: instrprof-darwin-dead-strip.c
(see comment on https://reviews.llvm.org/D135340).
This was reverted because it was breaking when targeting Darwin which
tried to export these symbols which are now hidden. It should be safe
to just stop attempting to export these symbols in the clang driver,
though Apple folks will need to change their TAPI allow list described
in the commit where these symbols were originally exported
f538018562
Bug: https://github.com/llvm/llvm-project/issues/58265
Differential Revision: https://reviews.llvm.org/D135340
This was reverted because it was breaking when targeting Darwin which
tried to export these symbols which are now hidden. It should be safe
to just stop attempting to export these symbols in the clang driver,
though Apple folks will need to change their TAPI allow list described
in the commit where these symbols were originally exported
f538018562
Bug: https://github.com/llvm/llvm-project/issues/58265
Differential Revision: https://reviews.llvm.org/D135340
This reverts commit 4ea1a647ff0973c683dd71fec77e6fe7f6dfd2ca.
This breaks on Darwin which tries to export these symbols
ebb258d3b0/clang/lib/Driver/ToolChains/Darwin.cpp (L1363)
I'll try to reland which that removed and approval from
Apple folks.
This improves consistency with other places (e.g. llvm::compression::decompress,
llvm::object::Decompressor::decompress, llvm-objcopy).
Note: when zstd::uncompress was added, we noticed that the API `ZSTD_decompress`
is fine while the zlib API `uncompress` is a misnomer.
Current implementation promotes a non-cold function in the SampleFDO profile
into a hot function in the FDO profile. This is too aggressive. This patch
promotes a hot functions in the SampleFDO profile into a hot function, and a
warm function in SampleFDO into a warm function in FDO.
Differential Revision: https://reviews.llvm.org/D132601
It's more natural to use uint8_t * (std::byte needs C++17 and llvm has
too much uint8_t *) and most callers use uint8_t * instead of char *.
The functions are recently moved into `llvm::compression::zlib::`, so
downstream projects need to make adaption anyway.
(Reapply after revert in e9ce1a588030d8d4004f5d7e443afe46245e9a92 due to
Fuchsia test failures. Removed changes in lib/ExecutionEngine/ other
than error categories, to be checked in more detail and reapplied
separately.)
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
* Refactor compression namespaces across the project, making way for a possible
introduction of alternatives to zlib compression.
Changes are as follows:
* Relocate the `llvm::zlib` namespace to `llvm::compression::zlib`.
Reviewed By: MaskRay, leonardchan, phosek
Differential Revision: https://reviews.llvm.org/D128953
With a sufficiently large output buffer, the only failure is Z_MEM_ERROR.
Check it and call the noreturn report_bad_alloc_error if applicable.
resize_for_overwrite may call report_bad_alloc_error as well.
Now that there is no other error type, we can replace the return type with void
and simplify call sites.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D121512
This patch adds support for optional memory profile information to be
included with and indexed profile. The indexed profile header adds a new
field which points to the offset of the memory profile section (if
present) in the indexed profile. For users who do not utilize this
feature the only overhead is a 64-bit offset in the header.
The memory profile section contains (1) profile metadata describing the
information recorded for each entry (2) an on-disk hashtable containing
the profile records indexed via llvm::md5(function_name). We chose to
introduce a separate hash table instead of the existing one since the
indexing for the instrumented fdo hash table is based on a CFG hash
which itself is perturbed by memprof instrumentation.
This commit also includes the changes reviewed separately in D120093.
Differential Revision: https://reviews.llvm.org/D120103
This reverts commit 85355a560a33897453df2ef959e255ee725eebce.
This patch adds support for optional memory profile information to be
included with and indexed profile. The indexed profile header adds a new
field which points to the offset of the memory profile section (if
present) in the indexed profile. For users who do not utilize this
feature the only overhead is a 64-bit offset in the header.
The memory profile section contains (1) profile metadata describing the
information recorded for each entry (2) an on-disk hashtable containing
the profile records indexed via llvm::md5(function_name). We chose to
introduce a separate hash table instead of the existing one since the
indexing for the instrumented fdo hash table is based on a CFG hash
which itself is perturbed by memprof instrumentation.
Differential Revision: https://reviews.llvm.org/D118653
This reverts commit 9fd2cb21fb3f763fc784eab198bf1297a24596fa.
Fixes an issue on big endian systems where the format version
was not converted to little endian prior to passing to GET_VERSION.
Differential Revision: https://reviews.llvm.org/D118390
This reverts commit 0f73fb18ca333e38cdb9ffa701a8db026c56041d.
Use llvm/Profile/MIBEntryDef.inc instead of relative path.
Generated the raw profile data with `-mllvm
-enable-name-compression=false` so that builbots where the reader is
built without zlib do not fail.
Also updated the test build instructions.
This reverts commit 43c2348c5b926df6bdbc5b70efaa35ecdefe12d5.
Buildbots are failing with an error on reading memprof testdata.
"Inputs/basic.profraw: profile uses zlib
compression but the profile reader was built without zlib support"
https://lab.llvm.org/buildbot/#/builders/16/builds/24490
This patch adds support for optional memory profile information to be
included with and indexed profile. The indexed profile header adds a new
field which points to the offset of the memory profile section (if
present) in the indexed profile. For users who do not utilize this
feature the only overhead is a 64-bit offset in the header.
The memory profile section contains (1) profile metadata describing the
information recorded for each entry (2) an on-disk hashtable containing
the profile records indexed via llvm::md5(function_name). We chose to
introduce a separate hash table instead of the existing one since the
indexing for the instrumented fdo hash table is based on a CFG hash
which itself is perturbed by memprof instrumentation.
Differential Revision: https://reviews.llvm.org/D118653
While the contents of the profile are backwards compatible the header
itself is not. For example, when adding new fields to the header results
in significant issues. This change adds allows for portable
instantiation of the header across indexed format versions.
Differential Revision: https://reviews.llvm.org/D118390
`createIRLevelProfileFlagVar()` seems to be only used in
`PGOInstrumentation.cpp` so we move it to that file. Then it can also
take advantage of directly using options rather than passing them as
arguments.
Reviewed By: kyulee, phosek
Differential Revision: https://reviews.llvm.org/D118097
Use the llvm flag `-pgo-function-entry-coverage` to create single byte "counters" to track functions coverage. This mode has significantly less size overhead in both code and data because
* We mark a function as "covered" with a store instead of an increment which generally requires fewer assembly instructions
* We use a single byte per function rather than 8 bytes per block
The trade off of course is that this mode only tells you if a function has been covered. This is useful, for example, to detect dead code.
When combined with debug info correlation [0] we are able to create an instrumented Clang binary that is only 150M (the vanilla Clang binary is 143M). That is an overhead of 7M (4.9%) compared to the default instrumentation (without value profiling) which has an overhead of 31M (21.7%).
[0] https://groups.google.com/g/llvm-dev/c/r03Z6JoN7d4
Reviewed By: kyulee
Differential Revision: https://reviews.llvm.org/D116180
Improve the error messages when using `llvm-profdata` to correlate profiles with debug info.
Reviewed By: kyulee, phosek
Differential Revision: https://reviews.llvm.org/D118166
Extend `llvm-profdata` to read in a `.proflite` file and also a debug info file to generate a normal `.profdata` profile. This reduces the binary size by 8.4% when building an instrumented Clang binary without value profiling (164 MB vs 179 MB).
This work is part of the "lightweight instrumentation" RFC: https://groups.google.com/g/llvm-dev/c/r03Z6JoN7d4
This was first landed in https://reviews.llvm.org/D114566 but had to be reverted due to build errors.
Reviewed By: kyulee
Differential Revision: https://reviews.llvm.org/D115915
Extend `llvm-profdata` to read in a `.proflite` file and also a debug info file to generate a normal `.profdata` profile. This reduces the binary size by 8.4% when building an instrumented Clang binary without value profiling (164 MB vs 179 MB).
This work is part of the "lightweight instrumentation" RFC: https://groups.google.com/g/llvm-dev/c/r03Z6JoN7d4
Reviewed By: kyulee
Differential Revision: https://reviews.llvm.org/D114566
Add the llvm flag `-debug-info-correlate` to attach debug info to instrumentation counters so we can correlate raw profile data to their functions. Raw profiles are dumped as `.proflite` files. The next diff enables `llvm-profdata` to consume `.proflite` and debug info files to produce a normal `.profdata` profile.
Part of the "lightweight instrumentation" work: https://groups.google.com/g/llvm-dev/c/r03Z6JoN7d4
The original diff https://reviews.llvm.org/D114565 was reverted because of the `Instrumentation/InstrProfiling/debug-info-correlate.ll` test, which is fixed in this commit.
Reviewed By: kyulee
Differential Revision: https://reviews.llvm.org/D115693
This reverts commit 800bf8ed29fbcaa9436540e83bc119ec92e7d40f.
The `Instrumentation/InstrProfiling/debug-info-correlate.ll` test was
failing because I forgot the `llc` commands are architecture specific.
I'll follow up with a fix.
Differential Revision: https://reviews.llvm.org/D115689
Add the llvm flag `-debug-info-correlate` to attach debug info to instrumentation counters so we can correlate raw profile data to their functions. Raw profiles are dumped as `.proflite` files. The next diff enables `llvm-profdata` to consume `.proflite` and debug info files to produce a normal `.profdata` profile.
Part of the "lightweight instrumentation" work: https://groups.google.com/g/llvm-dev/c/r03Z6JoN7d4
Reviewed By: kyulee
Differential Revision: https://reviews.llvm.org/D114565
This patch fixes some issues introduced in
https://reviews.llvm.org/D108942:
1) Remove the default label to fix the bots that use
-Werror,-Wcovered-switch-default
2) Modify the malformed test to fix the bots that are
built without zlib support
3) Modify some error messages in malformed profiles
This patch fixes:
llvm/lib/ProfileData/InstrProf.cpp:146:3: error: default label in
switch which covers all enumeration values
[-Werror,-Wcovered-switch-default]
If profile data is malformed for any kind of reason, we generate
an error that only reports "malformed instrumentation profile data"
without any further information. This patch extends InstrProfError
class to receive an optional error message argument, so that we can
do better error reporting.
Differential Revision: https://reviews.llvm.org/D108942
