decodeFPImmed creates immediate operand using register operand width,
but size of created immediate should correspond to OperandType for
RegisterOperand.
e.g. OPW128 could be used for RegisterOperands that use v2f64 v4f32
and v8f16. Each RegisterOperands would have different OperandType and
require that immediate is decoded using 64, 32 and 16 bit immediate
respectively.
decodeOperand_<RegClass> only provides width for register decoding,
introduce decodeOperand_<RegClass>_Imm<ImmWidth> that also provides
width for immediate decoding.
Refactor RegisterOperands:
- decoders get _Imm<ImmWidth> suffix in some cases
- removed unused RegisterOperands defined via multiclass
- use different RegisterOperand in a few places, new RegisterOperand's
decoder corresponds to the number of bits used for operand's encoding
Refactor decoder functions:
- add asserts for the size of encoding that will be decoded
- regroup them according to the method of decoding
decodeOperand_<RegClass> (register only, no immediate) decoders can now
create immediate of consistent size, use it for better diagnostic of
'invalid immediate'.
Differential Revision: https://reviews.llvm.org/D142636
Change MCInstrDesc::operands to return an ArrayRef so we can easily use
it everywhere instead of the (IMHO ugly) opInfo_begin and opInfo_end.
A future patch will remove opInfo_begin and opInfo_end.
Also use it instead of raw access to the OpInfo pointer. A future patch
will remove this pointer.
Differential Revision: https://reviews.llvm.org/D142213
They do not seem to be GFX10-specific anymore. Also renames the
corresponding feature.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D141069
Disassembler can successfully decode sgpr register when only vgpr
registers are valid for the operand (e.g. VReg_* and VISrc_* operands).
In InstPrinter, detect when operand register class does not contain
register that is being printed. Does not result in an error.
Intended use is for disassembler tests.
Differential Revision: https://reviews.llvm.org/D139646
Correct v_cndmask_b32 to support abs/neg modifiers in dpp/sdwa/e64 variants.
Correct v_cndmask_b16 for proper disassembly of abs/neg modifiers in e64_dpp variants.
Differential Revision: https://reviews.llvm.org/D135900
For most DPP instructions, the old operand stores the value that was in
the current lane before the DPP operation, and is tied to the
destination. For VOPC DPP, this is unnecessary and incorrect.
There appears to have been a latent bug related to D122737 with
SIInstrInfo::isOperandLegal. If you checked if a register operand was legal
when the InstructionDesc expected an immediate, it reported that is valid.
Its fix is necessary for and tested in this patch.
Reviewed By: foad, rampitec
Differential Revision: https://reviews.llvm.org/D130040
Without this, the new test case would fail with:
AMDGPUInstPrinter.cpp:545: void llvm::AMDGPUInstPrinter::printImmediate64(uint64_t, const llvm::MCSubtargetInfo &, llvm::raw_ostream &): Assertion `isUInt<32>(Imm) || Imm == 0x3fc45f306dc9c882' failed.
Differential Revision: https://reviews.llvm.org/D128435
Supports encoding existing instrutions on gfx11 and MC support for the new VOPC
dpp instructions.
Patch 19/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126978
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126989
The reverted dependent commit is now relanded, so reland this.
Includes dpp instructions and vop1/vop2 promoted to vop3
Patch 17/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126483
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126917
There was an issue with encoding wide (>64 bit) instructions on
BigEndian hosts, which is fixed in D127195. Therefore reland this.
gfx11 adds the ability to use dpp modifiers on vop3 instructions.
This patch adds machine code layer support for that. The MCCodeEmitter
is changed to use APInt instead of uint64_t to support these wider
instructions.
Patch 16/N for upstreaming of AMDGPU gfx11 architecture
Differential Revision: https://reviews.llvm.org/D126483
Includes dpp instructions and vop1/vop2 promoted to vop3
Patch 17/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126483
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126917
gfx11 adds the ability to use dpp modifiers on vop3 instructions.
This patch adds machine code layer support for that. The MCCodeEmitter
is changed to use APInt instead of uint64_t to support these wider
instructions.
Patch 16/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126475
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126483
MachineCode Support for FLAT type instructions
Contributors:
Sebastian Neubauer <sebastian.neubauer@amd.com>
Patch 12/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125989
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D125992
A new instruction encoding. Some of these instructions were previously VOP3
encoded.
Contributors:
Carl Ritson <carl.ritson@amd.com>
Patch 11/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125824
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D125989
MC layer support for SOP(scalar alu operations) including encoding
support for s_delay_alu and s_sendmsg_rtn.
Contributors:
Jay Foad <jay.foad@amd.com>
Patch 7/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125319
Reviewed By: #amdgpu, arsenm
Differential Revision: https://reviews.llvm.org/D125498
Includes MachineCode layer support and tests, and MIR tests not requiring
CodeGen pass changes.
Includes a small change in SMInstructions.td to correct encoded bits.
Contributors:
Petar Avramovic <Petar.Avramovic@amd.com>
Dmitry Preobrazhensky <dmitry.preobrazhensky@amd.com>
Depends on D125316
Patch 6/N for upstreaming of AMDGPU gfx11 architecture.
Reviewed By: dp, Petar.Avramovic
Differential Revision: https://reviews.llvm.org/D125319
These instructions should allow src0 to be a literal with the same
value as the mandatory other literal. Enable it by introducing an
operand that defers adding its value to the MI when decoding till
the mandatory literal is parsed.
Reviewed By: dp, foad
Differential Revision: https://reviews.llvm.org/D111067
Change-Id: I22b0ae0d35bad17b6f976808e48bffe9a6af70b7
1. Splitted out some parts of R600 target to separate modules/headers.
2. Reduced some include lists in headers.
3. Found and fixed issue with override `GCNTargetMachine::getSubtargetImpl()`
and `R600TargetMachine::getSubtargetImpl()` had different return value type
than base class.
4. Minor forward declarations cleanup.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D108596
AMDGPUAsmParser::isSupportedDPPCtrl() was failing to correctly
find a DPP register operand, regadless of the position it is
always src0. Moved this check into a new validateDPP() method
where we have full instruction already. In particular it was
failing to reject this case:
v_cvt_u32_f64 v5, v[0:1] quad_perm:[0,2,1,1] row_mask:0xf bank_mask:0xf
Essentially it was broken for any case where size of dst and
src0 differ.
It also improves the diagnostics with a proper error message.
The check in the InstPrinter also drops verification of the dst
register as it does not have anything to do with the dpp operand.
Differential Revision: https://reviews.llvm.org/D101930
By convention, VOP1/2/C instructions which can be promoted to VOP3 have _e32 suffix while promoted instructions have _e64 suffix. Instructions which have a single variant should have no _e32/_e64 suffix. Unfortunately there was no simple way to identify single variant instructions - it was implemented by a hack. See bug https://bugs.llvm.org/show_bug.cgi?id=39086.
This fix simplifies handling of single VOP instructions by adding a dedicated flag.
Differential Revision: https://reviews.llvm.org/D99408
Replace individual operands GLC, SLC, and DLC with a single cache_policy
bitmask operand. This will reduce the number of operands in MIR and I hope
the amount of code. These operands are mostly 0 anyway.
Additional advantage that parser will accept these flags in any order unlike
now.
Differential Revision: https://reviews.llvm.org/D96469
Update the list of s_sendmsg messages known to the assembler and
disassembler and validate the ones that were added or removed in gfx9
and gfx10.
Differential Revision: https://reviews.llvm.org/D97295
Enabled "bound_ctrl:1" and disabled "bound_ctrl:-1" syntax.
Corrected printer to output "bound_ctrl:1" instead of "bound_ctrl:0".
See bug 35397 for detailed issue description.
Differential Revision: https://reviews.llvm.org/D97048
As mentioned in TODO comment, casting double to float causes NaNs to change bits.
To avoid the change, this patch adds support for single-floating-point immediate value on MachineCode.
Patch by Yuta Saito.
Differential Revision: https://reviews.llvm.org/D77384
