This reverts commit 122efef8ee9be57055d204d52c38700fe933c033.
- Patch fixed to not reuse definitions from predecessors in EH landing pads.
- Late review suggestions (by MaskRay) have been addressed.
- M68k/pipeline.ll test updated.
- Init captures added in processBlock() to avoid capturing structured bindings.
- RISCV has this disabled for now.
Original commit message:
A new pass MachineLateInstrsCleanup is added to be run after PEI.
This is a simple pass that removes redundant and identical instructions
whenever found by scanning the MF once while keeping track of register
definitions in a map. These instructions are typically immediate loads
resulting from rematerialization, and address loads emitted by target in
eliminateFrameInde().
This is enabled by default, but a target could easily disable it by means of
'disablePass(&MachineLateInstrsCleanupID);'.
This late cleanup is naturally not "optimal" in removing instructions as it
is done by looking at phys-regs, but still quite effective. It would be
desirable to improve other parts of CodeGen and avoid these redundant
instructions in the first place, but there are no ideas for this yet.
Differential Revision: https://reviews.llvm.org/D123394
Reviewed By: RKSimon, foad, craig.topper, arsenm, asb
Init captures added in processBlock() to avoid capturing structured bindings,
which caused the build problems (with clang).
RISCV has this disabled for now until problems relating to post RA pseudo
expansions are resolved.
A new pass MachineLateInstrsCleanup is added to be run after PEI.
This is a simple pass that removes redundant and identical instructions
whenever found by scanning the MF once while keeping track of register
definitions in a map. These instructions are typically immediate loads
resulting from rematerialization, and address loads emitted by target in
eliminateFrameInde().
This is enabled by default, but a target could easily disable it by means of
'disablePass(&MachineLateInstrsCleanupID);'.
This late cleanup is naturally not "optimal" in removing instructions as it
is done by looking at phys-regs, but still quite effective. It would be
desirable to improve other parts of CodeGen and avoid these redundant
instructions in the first place, but there are no ideas for this yet.
Differential Revision: https://reviews.llvm.org/D123394
Reviewed By: RKSimon, foad, craig.topper, arsenm, asb
D132080 introduced a bug leading to `RegisterClassInfo` caches not
getting invalidated when there was exactly one more CSR register added.
Differential Revision: https://reviews.llvm.org/D132606
`RegisterClassInfo` caches information like allocation orders and reuses
it for multiple machine functions where possible. However the `MCPhysReg
*CalleeSavedRegs` field used to test whether the set of callee saved
registers changed did not work: After D28566
`MachineRegisterInfo::getCalleeSavedRegs()` can return dynamically
computed CSR sets that are only valid while the `MachineRegisterInfo`
object of the current function exists.
This changes the code to make a copy of the CSR list instead of keeping
a possibly invalid pointer around.
Differential Revision: https://reviews.llvm.org/D132080
For historic reasons, the behavior of .align differs between targets.
Fortunately, there are alternatives, .p2align and .balign, which make the
interpretation of the parameter explicit, and which behave consistently across
targets.
This patch teaches MC to use .p2align instead of .align, so that people reading
code for multiple architectures don't have to remember which way each platform
does its .align directive.
Differential Revision: http://reviews.llvm.org/D16549
llvm-svn: 258750
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
eliminateFrameIndex() has been reworked to handle both small & large frames
with either a FP or SP.
An additional Slot is required for Scavenging spills when not using FP for large frames.
Reworked the handling of Register Scavenging.
Whether we are using an FP or not, whether it is a large frame or not,
and whether we are using a large code model or not are now independent.
llvm-svn: 196091
