As a preparation for implementing DWARFv5 address ranges generation,
this patch refactors cloneAddressAttribute() method. It has special
handling for addresses which can be relocated in some unrelated value,
for applying relocations twice, for indexed addresses. Instead of
all these special handlings this patch uses general handling:
Read attribute value from InputDIE and apply PCOffset.
Another thing is that current handling of DW_FORM_addrx misses the
fact that relocations might be applied twice in some cases. This
patch fixes this problem also.
Differential Revision: https://reviews.llvm.org/D143269
This patch is extracted from D96035. It creates an empty library DWARFLinkerParallel.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D140787
generation code from DWARFLinker. It adds command line option:
--build-accelerator [none,DWARF]
Build accelerator tables(default: none)
=none - Do not build accelerators
=DWARF - Build accelerator tables according to the resulting DWARF version
DWARFv4: .debug_pubnames and .debug_pubtypes
DWARFv5: .debug_names
Differential Revision: https://reviews.llvm.org/D139638
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
This avoids recomputing string length that is already known at compile time.
It has a slight impact on preprocessing / compile time, see
https://llvm-compile-time-tracker.com/compare.php?from=3f36d2d579d8b0e8824d9dd99bfa79f456858f88&to=e49640c507ddc6615b5e503144301c8e41f8f434&stat=instructions:u
This a recommit of e953ae5bbc313fd0cc980ce021d487e5b5199ea4 and the subsequent fixes caa713559bd38f337d7d35de35686775e8fb5175 and 06b90e2e9c991e211fecc97948e533320a825470.
The above patchset caused some version of GCC to take eons to compile clang/lib/Basic/Targets/AArch64.cpp, as spotted in aa171833ab0017d9732e82b8682c9848ab25ff9e.
The fix is to make BuiltinInfo tables a compilation unit static variable, instead of a private static variable.
Differential Revision: https://reviews.llvm.org/D139881
Revert "Fix lldb option handling since e953ae5bbc313fd0cc980ce021d487e5b5199ea4 (part 2)"
Revert "Fix lldb option handling since e953ae5bbc313fd0cc980ce021d487e5b5199ea4"
GCC build hangs on this bot https://lab.llvm.org/buildbot/#/builders/37/builds/19104
compiling CMakeFiles/obj.clangBasic.dir/Targets/AArch64.cpp.d
The bot uses GNU 11.3.0, but I can reproduce locally with gcc (Debian 12.2.0-3) 12.2.0.
This reverts commit caa713559bd38f337d7d35de35686775e8fb5175.
This reverts commit 06b90e2e9c991e211fecc97948e533320a825470.
This reverts commit e953ae5bbc313fd0cc980ce021d487e5b5199ea4.
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
Currently, DWARFLinker receives kind of accel tables as predefined sets:
```
Apple, ///< .apple_names, .apple_namespaces, .apple_types, .apple_objc.
Dwarf, ///< DWARF v5 .debug_names.
Default, ///< Dwarf for DWARF5 or later, Apple otherwise.
Pub, ///< .debug_pubnames, .debug_pubtypes
```
This patch removes implicit sets of tables(Default, Dwarf) and allows to ask for several sets:
```
Apple, ///< .apple_names, .apple_namespaces, .apple_types, .apple_objc.
Pub, ///< .debug_pubnames, .debug_pubtypes
DebugNames ///< .debug_names.
```
It allows seamlessness adding more accel tables in the future: .gdb_index, .debug_cu_index...
Doing things that way, DWARFLinker will be independent of consumers' requirements.
f.e. dsymutil and llvm-dwarfutil may have different variants for Default set
(so, instead of implementing these differencies inside DWARFLinker it could be
implemented in the corresponding module).
Differential Revision: https://reviews.llvm.org/D132371
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
llvm::dwarfutil::ObjFileAddressMap::relocateIndexedAddr() does not
read address value. The relocateIndexedAddr() should not relocate
the address as the linked binary has already resolved relocations.
But it should read the value. This patch adds the reading value
of the address.
Differential Revision: https://reviews.llvm.org/D133324
Currently, DWARFLinker determines the target DWARF version internally.
It examines incoming object files, detects maximal
DWARF version and uses that version for the output file.
This patch allows explicitly setting output DWARF version by the consumer
of DWARFLinker. So that DWARFLinker uses a specified version instead
of autodetected one. It allows consumers to use different logic for
setting the target DWARF version. f.e. instead of the maximally used version
someone could set a higher version to convert from DWARFv4 to DWARFv5
(This possibility is not supported yet, but it would be good if
the interface will support it). Or another variant is to set the target
version through the command line. In this patch, the autodetection is moved
into the consumers(DwarfLinkerForBinary.cpp, DebugInfoLinker.cpp).
Differential Revision: https://reviews.llvm.org/D132755
llvm-dwarutil.cpp redundantly calls to InitializeAllAsmParsers.
That call might be removed as well as dependency on ${LLVM_TARGETS_TO_BUILD}
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D131157
Current DWARFLinker implementation does not support some debug sections
(mainly DWARF v5 sections). This patch adds diagnostic for such sections.
The warning would be displayed for critical(such that could not be removed)
sections and the source file would be skipped. Other unsupported sections
would be removed and warning message should be displayed. The zero exit
status would be returned for both cases.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D123623
Current DWARFLinker implementation does not support some debug sections
(mainly DWARF v5 sections). This patch adds diagnostic for such sections.
The warning would be displayed for critical(such that could not be removed)
sections and the source file would be skipped. Other unsupported sections
would be removed and warning message should be displayed. The zero exit
status would be returned for both cases.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D123623
DWARF files may contain overlapping address ranges. f.e. it can happen if the two
copies of the function have identical instruction sequences and they end up sharing.
That looks incorrect from the point of view of DWARF spec. Current implementation
of DWARFLinker does not combine overlapped address ranges. It would be good if such
ranges would be handled in some useful way. Thus, this patch allows DWARFLinker
to combine overlapped ranges in a single one.
Depends on D86539
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D123469
DWARF files may contain overlapping address ranges. f.e. it can happen if the two
copies of the function have identical instruction sequences and they end up sharing.
That looks incorrect from the point of view of DWARF spec. Current implementation
of DWARFLinker does not combine overlapped address ranges. It would be good if such
ranges would be handled in some useful way. Thus, this patch allows DWARFLinker
to combine overlapped ranges in a single one.
Depends on D86539
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D123469
This patch implements proposal https://lists.llvm.org/pipermail/llvm-dev/2020-August/144579.html
llvm-dwarfutil - is a tool that is used for processing debug info(DWARF) located in built binary files to improve debug info quality, reduce debug info size. The patch currently implements smaller set of command-line options(comparing to the proposal):
```
./llvm-dwarfutil [options] <input file> <output file>
--garbage-collection Do garbage collection for debug info(default)
-j <value> Alias for --num-threads
--no-garbage-collection Don`t do garbage collection for debug info
--no-odr-deduplication Don`t do ODR deduplication for debug types
--no-odr Alias for --no-odr-deduplication
--no-separate-debug-file
Create single output file, containing debug tables(default)
--num-threads <threads> Number of available threads for multi-threaded execution. Defaults to the number of cores on the current machine
--odr-deduplication Do ODR deduplication for debug types(default)
--odr Alias for --odr-deduplication
--separate-debug-file Create two output files: file w/o debug tables and file with debug tables
--tombstone [bfd,maxpc,exec,universal]
Tombstone value used as a marker of invalid address(default: universal)
=bfd - Zero for all addresses and [1,1] for DWARF v4 (or less) address ranges and exec
=maxpc - Minus 1 for all addresses and minus 2 for DWARF v4 (or less) address ranges
=exec - Match with address ranges of executable sections
=universal - Both: bfd and maxpc
```
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D86539
This patch implements proposal https://lists.llvm.org/pipermail/llvm-dev/2020-August/144579.html
llvm-dwarfutil - is a tool that is used for processing debug info(DWARF) located in built binary files to improve debug info quality, reduce debug info size. The patch currently implements smaller set of command-line options(comparing to the proposal):
```
./llvm-dwarfutil [options] <input file> <output file>
--garbage-collection Do garbage collection for debug info(default)
-j <value> Alias for --num-threads
--no-garbage-collection Don`t do garbage collection for debug info
--no-odr-deduplication Don`t do ODR deduplication for debug types
--no-odr Alias for --no-odr-deduplication
--no-separate-debug-file
Create single output file, containing debug tables(default)
--num-threads <threads> Number of available threads for multi-threaded execution. Defaults to the number of cores on the current machine
--odr-deduplication Do ODR deduplication for debug types(default)
--odr Alias for --odr-deduplication
--separate-debug-file Create two output files: file w/o debug tables and file with debug tables
--tombstone [bfd,maxpc,exec,universal]
Tombstone value used as a marker of invalid address(default: universal)
=bfd - Zero for all addresses and [1,1] for DWARF v4 (or less) address ranges and exec
=maxpc - Minus 1 for all addresses and minus 2 for DWARF v4 (or less) address ranges
=exec - Match with address ranges of executable sections
=universal - Both: bfd and maxpc
```
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D86539
