Make the access to profile data going through virtual file system so the
inputs can be remapped. In the context of the caching, it can make sure
we capture the inputs and provided an immutable input as profile data.
Reviewed By: akyrtzi, benlangmuir
Differential Revision: https://reviews.llvm.org/D139052
This is an issue reported inside the NewPMDriver module. Static analyzer reported that Null pointer 'P' may be dereferenced at line 371 and two more sites. Proposed change guards this use.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D142047
We've already verified the input module manually in opt so this is redundant.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D139899
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
Enable using -module-summary with -S
(similarly to what currently can be achieved with opt <input> -o - | llvm-dis).
This is a recommit of ef9e62469.
Test plan: ninja check-all
Differential revision: https://reviews.llvm.org/D137768
This diff splits out (from LLVMCore) IR printing passes into IRPrinter.
This structure is similar to what we already have for IRReader and
enables us to avoid circular dependencies between LLVMCore and Analysis
(this is a preparation for https://reviews.llvm.org/D137768).
The legacy interface is left unchanged, once the legacy pass manager
is removed (in the future) we will be able to clean it up further.
The bazel build configuration has been updated as well.
Test plan:
1/ Tested the following cmake configurations: static/dynamic linking * lld/gold * clang/gcc
2/ bazel build --config=generic_clang @llvm-project//...
Differential revision: https://reviews.llvm.org/D138081
This reverts commit bf8381a8bce28fc69857645cc7e84a72317e693e.
There is a layering violation: LLVMAnalysis depends on LLVMCore, so
LLVMCore should not include LLVMAnalysis header
llvm/Analysis/ModuleSummaryAnalysis.h
Enable using -module-summary with -S
(similarly to what currently can be achieved with opt <input> -o - | llvm-dis).
This is a recommit of ef9e62469.
Test plan: ninja check-all
Differential revision: https://reviews.llvm.org/D137768
This reverts commit ef9e624694c0f125c53f7d0d3472fd486bada57d
for further investigation offline.
It appears to break the buildbot
llvm-clang-x86_64-sie-ubuntu-fast.
Enable using -module-summary with -S
(similarly to what currently can be achieved with opt <input> -o - | llvm-dis).
Test plan: ninja check-all
Differential revision: https://reviews.llvm.org/D137768
Add a check (can be disabled via a flag) that the pipeline we generate is actually parsable.
Can be disabled because we don't expect to handle every pass in -print-pipeline-passes.
Fixes#58280.
Reviewed By: ChuanqiXu
Differential Revision: https://reviews.llvm.org/D135703
Debugify in OriginalDebugInfo mode, introduced with D82545,
runs only with legacy PassManager.
This patch enables this utility for the NewPM.
Differential Revision: https://reviews.llvm.org/D115351
Now that we have the sanitizer metadata that is actually on the global
variable, and now that we use debuginfo in order to do symbolization of
globals, we can delete the 'llvm.asan.globals' IR synthesis.
This patch deletes the 'location' part of the __asan_global that's
embedded in the binary as well, because it's unnecessary. This saves
about ~1.7% of the optimised non-debug with-asserts clang binary.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D127911
VectorizerStart extension is module callback in old PM, but is function
callback in new PM. We lack a module extension point between end of
buildModuleSimplificationPipeline and the function optimization
(including vectorizer) pipeline. So this patch adds a new module
extension point before the function optimization pipeline.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D122296
This is legacy PM-specific, which is deprecated.
Uses of this should be replaced with a corresponding `-passes='print<foo>'`.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D122420
This is a clean-up patch. The functional pass was rolled into the module pass in D112732.
Reviewed By: vitalybuka, aeubanks
Differential Revision: https://reviews.llvm.org/D120674
This PR fixes the tests for the `OptimizerLast` extension point in the new pass manager. The extension point uses module passes, but it was being tested with a function pass.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120581
This PR adds two extension points to the default LTO pipeline in PassBuilder, one at the beginning and one at the end. These two extension points already existed in the old pass manager, the aim is to replicate the same functionality in the new one.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120491
Adding -debugify and -check-debugify in the PassRegistry will make
sure the passes are listed properly by -print-pipeline-passes as
well as -print-passes.
It also allows removal of the custom pipeline parsing callback that
has been used in the NewPMDriver.
Differential Revision: https://reviews.llvm.org/D118369
Added opt option -print-pipeline-passes to print a -passes compatible
string describing the built pass pipeline.
As an example:
$ opt -enable-new-pm=1 -adce -licm -simplifycfg -o /dev/null /dev/null -print-pipeline-passes
verify,function(adce),function(loop-mssa(licm)),function(simplifycfg<bonus-inst-threshold=1;no-forward-switch-cond;no-switch-to-lookup;keep-loops;no-hoist-common-insts;no-sink-common-insts>),verify,BitcodeWriterPass
At the moment this is best-effort only and there are some known
limitations:
- Not all passes accepting parameters will print their parameters
(currently only implemented for simplifycfg).
- Some ClassName to pass-name mappings are not unique.
- Some ClassName to pass-name mappings are missing (e.g.
BitcodeWriterPass).
Differential Revision: https://reviews.llvm.org/D108298
Added opt option -print-pipeline-passes to print a -passes compatible
string describing the built pass pipeline.
As an example:
$ opt -enable-new-pm=1 -adce -licm -simplifycfg -o /dev/null /dev/null -print-pipeline-passes
verify,function(adce),function(loop-mssa(licm)),function(simplifycfg<bonus-inst-threshold=1;no-forward-switch-cond;no-switch-to-lookup;keep-loops;no-hoist-common-insts;no-sink-common-insts>),verify,BitcodeWriterPass
At the moment this is best-effort only and there are some known
limitations:
- Not all passes accepting parameters will print their parameters
(currently only implemented for simplifycfg).
- Some ClassName to pass-name mappings are not unique.
- Some ClassName to pass-name mappings are missing (e.g.
BitcodeWriterPass).
A couple of passes that are parameterized in new-PM used different
pass names (in cmd line interface) while using the same pass class
name. This patch updates the PassRegistry to model pass parameters
more properly using PASS_WITH_PARAMS.
Reason for the change is to ensure that we have a 1-1 mapping
between class name and pass name (when disregarding the params).
With a 1-1 mapping it is more obvious which pass name to use in
options such as -debug-only, -print-after etc.
The opt -passes syntax is changed for the following passes:
early-cse-memssa => early-cse<memssa>
post-inline-ee-instrument => ee-instrument<post-inline>
loop-extract-single => loop-extract<single>
lower-matrix-intrinsics-minimal => lower-matrix-intrinsics<minimal>
This patch is not updating pass names in docs/Passes.rst. Not quite
sure what the status is for that document (e.g. when it comes to
listing pass paramters). It is only loop-extract-single that is
mentioned in Passes.rst today, out of the passes mentioned above.
Differential Revision: https://reviews.llvm.org/D108362
Refactored implementation of AddressSanitizerPass and
HWAddressSanitizerPass to use pass options similar to passes like
MemorySanitizerPass. This makes sure that there is a single mapping
from class name to pass name (needed by D108298), and options like
-debug-only and -print-after makes a bit more sense when (despite
that it is the unparameterized pass name that should be used in those
options).
A result of the above is that some pass names are removed in favor
of the parameterized versions:
- "khwasan" is now "hwasan<kernel;recover>"
- "kasan" is now "asan<kernel>"
- "kmsan" is now "msan<kernel>"
Differential Revision: https://reviews.llvm.org/D105007
This patch implements Flow Sensitive Sample FDO (FSAFDO) profile
loader. We have two profile loaders for FS profile,
one before RegAlloc and one before BlockPlacement.
To enable it, when -fprofile-sample-use=<profile> is specified,
add "-enable-fs-discriminator=true \
-disable-ra-fsprofile-loader=false \
-disable-layout-fsprofile-loader=false"
to turn on the FS profile loaders.
Differential Revision: https://reviews.llvm.org/D107878
