Original location of the unittests was Transforms/InstCombine/X86
which caused an issue as non-x86 targets ended up with a dependency on
X86 which isn't right.
Moved the unit tests to Target/X86 so should be good now.
Differential Revision: https://reviews.llvm.org/D145220
Basically NFC: A TEST/TEST_F/etc that bails out early (usually because
setup failed or some other runtime condition wasn't met) generally
should use GTEST_SKIP() to report its status correctly, unless it
takes steps to report another status (e.g., FAIL()).
I did see a handful of tests show up as SKIPPED after this change,
which is not unexpected. The status seemed appropriate in all the new
cases.
class ConstantBuffer is added to save information for cbuffer.
Also add CBufferDataLayout to calculate the size for cbuffer.
Now always use legacy cbuffer layout.
https://reviews.llvm.org/D134998 will add control to disable legacy cbuffer layout.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D136031
When adding llvm to a build with add_subdirectory, CMAKE_SOURCE_DIR
refers to the source directory of the parent project. We want to use
PROJECT_SOURCE_DIR instead.
Differential Revision: https://reviews.llvm.org/D141521
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
Correct the pseudo atomic instruction size for branch
relaxation and branch folding passes.
Inspired by D118175, D118009 and D117970.
Depends on D138481
Reviewed By: SixWeining, gonglingqin, xen0n
Differential Revision: https://reviews.llvm.org/D138469
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
Correct the pseudo atomic instruction size for branch
relaxation and branch folding passes.
Inspired by D118175, D118009 and D117970.
Depends on D138481
Reviewed By: SixWeining, gonglingqin, xen0n
Differential Revision: https://reviews.llvm.org/D138469
In revision B.q and before of the Armv8-M architecture reference
manual, the vector/scalar forms of the `vmla` and `vmlas` instructions
came in signed and unsigned integer forms, such as `vmla.s8 q0,q1,r2`
or `vmlas.u32 q3,q4,r5`.
Revision B.r has changed this. There are no longer signed and unsigned
versions of these instructions, since they were functionally identical
anyway. Now there is just `vmla.i8` (or `i16` or `i32`, and similarly
for `vmlas`). Bit 28 of the instruction encoding, which was previously
0 for signed or 1 for unsigned, is now expected to be 0 always.
This change updates LLVM to the new version of the architecture. The
obsoleted encodings for unsigned integers are now decoding errors, and
only the still-valid encoding is ever emitted. This shouldn't break
any existing assembly code, because the old signed and unsigned
versions of the mnemonic are still accepted by the assembler (which is
standard practice anyway for all signedness-agnostic MVE integer
instructions).
Reviewed By: dmgreen, lenary
Differential Revision: https://reviews.llvm.org/D138827
1. Save typed pointer type for GlobalVariable/Function instead of the ObjectType.
This will allow use GlobalVariable/Function as value.
2. Save target type for global ctors for Constant.
3. In DXILBitcodeWriter::getTypeID, check PointerMap first for Constant case.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D133283
This patch adds a utility class that will be used in subsequent patches
for parsing the function/callsite attributes and determining whether
changes to PSTATE.SM are needed, or whether a lazy-save mechanism is
required.
It also implements some of the restrictions on the SME attributes
in the IR Verifier pass.
More details about the SME attributes and design can be found
in D131562.
Reviewed By: david-arm, aemerson
Differential Revision: https://reviews.llvm.org/D131570
A simple sed doing these substitutions:
- `${LLVM_BINARY_DIR}/(\$\{CMAKE_CFG_INTDIR}/)?lib(${LLVM_LIBDIR_SUFFIX})?\>` -> `${LLVM_LIBRARY_DIR}`
- `${LLVM_BINARY_DIR}/(\$\{CMAKE_CFG_INTDIR}/)?bin\>` -> `${LLVM_TOOLS_BINARY_DIR}`
where `\>` means "word boundary".
The only manual modifications were reverting changes in
- `compiler-rt/cmake/Modules/CompilerRTUtils.cmake
- `runtimes/CMakeLists.txt`
because these were "entry points" where we wanted to tread carefully not not introduce a "loop" which would end with an undefined variable being expanded to nothing.
This hopefully increases readability overall, and also decreases the usages of `LLVM_LIBDIR_SUFFIX`, preparing us for D130586.
Reviewed By: sebastian-ne
Differential Revision: https://reviews.llvm.org/D132316
This allows the construct to be shared between different backends. However, it
still remains illegal to use TypedPointerType in LLVM IR--the type is intended
to remain an auxiliary type, not a real LLVM type. So no support is provided for
LLVM-C, nor bitcode, nor LLVM assembly (besides the bare minimum needed to make
Type->dump() work properly).
Reviewed By: beanz, nikic, aeubanks
Differential Revision: https://reviews.llvm.org/D130592
This patch sorts unit test targets into directories corresponding to the
test source file directories to improve target navigation.
Reviewed By: smeenai
Differential Revision: https://reviews.llvm.org/D124810
As implemented this patch assumes that Typed pointer support remains in
the llvm::PointerType class, however this could be modified to use a
different subclass of llvm::Type that could be disallowed from use in
other contexts.
This does not rely on inserting typed pointers into the Module, it just
uses the llvm::PointerType class to track and unique types.
Fixes#54918
Reviewed By: kuhar
Differential Revision: https://reviews.llvm.org/D122268
The commit adds a unit test that uses the facilities of libLLVMCore
without adding it to link components. This causes failures with
the shared libraries builds.
This patch just adds the missing library to the link step.
Currently, ARMBaseInstrInfo::getInstSizeInBytes() uses hard-coded
instruction size for some pseudo-instructions, while this
information should ideally be found in ARMInstrInfo.td,
ARMInstrThumb(2).td files (which can be accessed via MCInstrDesc). Hence,
the .td files should be updated and no hard-coded instruction sizes
should be used by getInstSizeInBytes() anymore.
Differential Revision: https://reviews.llvm.org/D118009
Currently, AArch64InstrInfo::getInstSizeInBytes() uses hard-coded
instruction size for some pseudo-instructions, while this
information should ideally be found in AArch64InstrInfo.td file (which
can be accessed via MCInstrDesc). Hence, the .td file should be updated
and no hard-coded instruction sizes should be used by
getInstSizeInBytes() anymore.
Differential Revision: https://reviews.llvm.org/D117970
This implements codegen for Armv8.8/9.3 Memory Operations extension (MOPS).
Any memcpy/memset/memmov intrinsics will always be emitted as a series
of three consecutive instructions P, M and E which perform the
operation. The SelectionDAG implementation is split into a separate
patch.
AArch64LegalizerInfo will now consider the following generic opcodes
if +mops is available, instead of legalising by expanding them to
libcalls: G_BZERO, G_MEMCPY_INLINE, G_MEMCPY, G_MEMMOVE, G_MEMSET
The s8 value of memset is legalised to s64 to match the pseudos.
AArch64O0PreLegalizerCombinerInfo will still be able to combine
G_MEMCPY_INLINE even if +mops is present, as it is unclear whether it is
better to generate fixed length copies or MOPS instructions for the
inline code of small or zero-sized memory operations, so we choose to be
conservative for now.
AArch64InstructionSelector will select the above as new pseudo
instructions: AArch64::MOPSMemory{Copy/Move/Set/SetTagging} These are
each expanded to a series of three instructions (e.g. SETP/SETM/SETE)
which must be emitted together during code emission to avoid scheduler
reordering.
This is part 3/4 of a series of patches split from
https://reviews.llvm.org/D117405 to facilitate reviewing.
Patch by Tomas Matheson and Son Tuan Vu
Differential Revision: https://reviews.llvm.org/D117763
This patch ensures that we always tune for a given CPU on AArch64
targets when the user specifies the "-mtune=xyz" flag. In the
AArch64Subtarget if the tune flag is unset we use the CPU value
instead.
I've updated the release notes here:
llvm/docs/ReleaseNotes.rst
and added tests here:
clang/test/Driver/aarch64-mtune.c
Differential Revision: https://reviews.llvm.org/D110258
This moves the registry higher in the LLVM library dependency stack.
Every client of the target registry needs to link against MC anyway to
actually use the target, so we might as well move this out of Support.
This allows us to ensure that Support doesn't have includes from MC/*.
Differential Revision: https://reviews.llvm.org/D111454
Currently when creating tail predicated loops, we need to validate that
all the live-outs of a loop will be equivalent with and without tail
predication, and if they are not we cannot legally create a
tail-predicated loop, leaving expensive vctp and vpst instructions in
the loop. These notably can include register-allocation instructions
like stack loads and stores, and copys lowered from COPYs to MVE_VORRs.
Instead of trying to prove this is valid late in the pipeline, this
patch introduces a MQPRCopy pseudo instruction that COPY is lowered to.
This can then either be converted to a MVE_VORR where possible, or to a
couple of VMOVD instructions if not. This way they do not behave
differently within and outside of tail-predications regions, and we can
know by construction that they are always valid. The idea is that we can
do the same with stack load and stores, converting them to VLDR/VSTR or
VLDM/VSTM where required to prove tail predication is always valid.
This does unfortunately mean inserting multiple VMOVD instructions,
instead of a single MVE_VORR, but my experiments show it to be an
improvement in general.
Differential Revision: https://reviews.llvm.org/D111048
This allows VMOVL in tail predicated loops so long as the the vector
size the VMOVL is extending into is less than or equal to the size of
the VCTP in the tail predicated loop. These cases represent a
sign-extend-inreg (or zero-extend-inreg), which needn't block tail
predication as in https://godbolt.org/z/hdTsEbx8Y.
For this a vecsize has been added to the TSFlag bits of MVE
instructions, which stores the size of the elements that the MVE
instruction operates on. In the case of multiple size (such as a
MVE_VMOVLs8bh that extends from i8 to i16, the largest size was be
chosen). The sizes are encoded as 00 = i8, 01 = i16, 10 = i32 and 11 =
i64, which often (but not always) comes from the instruction encoding
directly. A unit test was added, and although only a subset of the
vecsizes are currently used, the rest should be useful for other cases.
Differential Revision: https://reviews.llvm.org/D109706
SME introduces the ZA array, a new piece of architectural register state
consisting of a matrix of [SVLb x SVLb] bytes, where SVL is the
implementation defined Streaming SVE vector length and SVLb is the
number of 8-bit elements in a vector of SVL bits.
SME instructions consist of three types of matrix operands:
* Tiles: a ZA tile is a square, two-dimensional sub-array of elements
within the ZA array. These tiles make up the larger accumulator array
and the granularity varies based on the element size, i.e.
- ZAQ0..ZAQ15 (smallest tile granule)
- ZAD0..ZAD7
- ZAS0..ZAS3
- ZAH0..ZAH1
or ZAB0 (largest tile granule, single tile)
* Tile vectors: similar to regular tiles, but have an extra 'h' or 'v'
to tell how the vector at [reg+offset] is layed out in the tile,
horizontally or vertically. E.g. za1h.h or za15v.q, which corresponds
to vectors in registers ZAH1 and ZAQ15, respectively.
* Accumulator matrix: this is the entire accumulator array ZA.
This patch adds the register classes and related operands and parsing
for SME instructions operating on the accumulator array.
The ADDHA and ADDVA instructions which operate on tiles are also added
in this patch to make some use of the code added, later patches will
make use of the other operands introduced here.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Co-authored by: Sander de Smalen (@sdesmalen)
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105570
Now that vmulh can be selected, this adds the MVE patterns to make it
legal and generate instructions.
Differential Revision: https://reviews.llvm.org/D88011
This removes the unit test from a968e7b82eac as it reportedly causes
some link problems. It can be reinstated once the issues are understood
and sorted out.
This adds some simple known bits handling for the three CSINC/NEG/INV
instructions. From the operands known bits we can compute the common
bits of the first operand and incremented/negated/inverted second
operand. The first, especially CSINC ZR, ZR, comes up fair amount in the
tests. The others are more rare so a unit test for them is added.
Differential Revision: https://reviews.llvm.org/D97788
This CL is not big but contains changes that span multiple analyses and
passes. This description is very long because it tries to explain basics
on what each pass/analysis does and why we need this change on top of
that. Please feel free to skip parts that are not necessary for your
understanding.
---
`WasmEHFuncInfo` contains the mapping of <EH pad, the EH pad's next
unwind destination>. The value (unwind dest) here is where an exception
should end up when it is not caught by the key (EH pad). We record this
info in WasmEHPrepare to fix catch mismatches, because the CFG itself
does not have this info. A CFG only contains BBs and
predecessor-successor relationship between them, but in `WasmEHFuncInfo`
the unwind destination BB is not necessarily a successor or the key EH
pad BB. Their relationship can be intuitively explained by this C++ code
snippet:
```
try {
try {
foo();
} catch (int) { // EH pad
...
}
} catch (...) { // unwind destination
}
```
So when `foo()` throws, it goes to `catch (int)` first. But if it is not
caught by it, it ends up in the next unwind destination `catch (...)`.
This unwind destination is what you see in `catchswitch`'s
`unwind label %bb` part.
---
`WebAssemblyExceptionInfo` groups exceptions so that they can be sorted
continuously together in CFGSort, as we do for loops. What this analysis
does is very simple: it creates a single `WebAssemblyException` per EH
pad, and all BBs that are dominated by that EH pad are included in this
exception. We also identify subexception relationship in this way: if
EHPad A domiantes EHPad B, EHPad B's exception is a subexception of
EHPad A's exception.
This simple rule turns out to be incorrect in some cases. In
`WasmEHFuncInfo`, if EHPad A's unwind destination is EHPad B, it means
semantically EHPad B should not be included in EHPad A's exception,
because it does not make sense to rethrow/delegate to an inner scope.
This is what happened in CFGStackify as a result of this:
```
try
try
catch
... <- %dest_bb is among here!
end
delegate %dest_bb
```
So this patch adds a phase in `WebAssemblyExceptionInfo::recalculate` to
make sure excptions' unwind destinations are not subexceptions of
their unwind sources in `WasmEHFuncInfo`.
But this alone does not prevent `dest_bb` in the example above from
being sorted within the inner `catch`'s exception, even if its exception
is not a subexception of that `catch`'s exception anymore, because of
how CFGSort works, which will be explained below.
---
CFGSort places BBs within the same `SortRegion` (loop or exception)
continuously together so they can be demarcated with `loop`-`end_loop`
or `catch`-`end_try` in CFGStackify.
`SortRegion` is a wrapper for one of `MachineLoop` or
`WebAssemblyException`. `SortRegionInfo` already does some complicated
things because there discrepancies between those two data structures.
`WebAssemblyException` is what we control, and it is defined as an EH
pad as its header and BBs dominated by the header as its BBs (with a
newly added exception of unwind destinations explained in the previous
paragraph). But `MachineLoop` is an LLVM data structure and uses the
standard loop detection algorithm. So by the algorithm, BBs that are 1.
dominated by the loop header and 2. have a path back to its header.
Because of the second condition, many BBs that are dominated by the loop
header are not included in the loop. So BBs that contain `return` or
branches to outside of the loop are not technically included in
`MachineLoop`, but they can be sorted together with the loop with no
problem.
Maybe to relax the condition, in CFGSort, when we are in a `SortRegion`
we allow sorting of not only BBs that belong to the current innermost
region but also BBs that are by the current region header.
(This was written this way from the first version written by Dan, when
only loops existed.) But now, we have cases in exceptions when EHPad B
is the unwind destination for EHPad A, even if EHPad B is dominated by
EHPad A it should not be included in EHPad A's exception, and should not
be sorted within EHPad A.
One way to make things work, at least correctly, is change `dominates`
condition to `contains` condition for `SortRegion` when sorting BBs, but
this will change compilation results for existing non-EH code and I
can't be sure it will not degrade performance or code size. I think it
will degrade performance because it will force many BBs dominated by a
loop, which don't have the path back to the header, to be placed after
the loop and it will likely to create more branches and blocks.
So this does a little hacky check when adding BBs to `Preferred` list:
(`Preferred` list is a ready list. CFGSort maintains ready list in two
priority queues: `Preferred` and `Ready`. I'm not very sure why, but it
was written that way from the beginning. BBs are first added to
`Preferred` list and then some of them are pushed to `Ready` list, so
here we only need to guard condition for `Preferred` list.)
When adding a BB to `Preferred` list, we check if that BB is an unwind
destination of another BB. To do this, this adds the reverse mapping,
`UnwindDestToSrc`, and getter methods to `WasmEHFuncInfo`. And if the BB
is an unwind destination, it checks if the current stack of regions
(`Entries`) contains its source BB by traversing the stack backwards. If
we find its unwind source in there, we add the BB to its `Deferred`
list, to make sure that unwind destination BB is added to `Preferred`
list only after that region with the unwind source BB is sorted and
popped from the stack.
---
This does not contain a new test that crashes because of this bug, but
this fix changes the result for one of existing test case. This test
case didn't crash because it fortunately didn't contain `delegate` to
the incorrectly placed unwind destination BB.
Fixes https://github.com/emscripten-core/emscripten/issues/13514.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D97247
This implements basic instructions for the new spec.
- Adds new versions of instructions: `catch`, `catch_all`, and `rethrow`
- Adds support for instruction selection for the new instructions
- `catch` needs a custom routine for the same reason `throw` needs one,
to encode `__cpp_exception` tag symbol.
- Updates `WebAssembly::isCatch` utility function to include `catch_all`
and Change code that compares an instruction's opcode with `catch` to
use that function.
- LateEHPrepare
- Previously in LateEHPrepare we added `catch` instruction to both
`catchpad`s (for user catches) and `cleanuppad`s (for destructors).
In the new version `catch` is generated from `llvm.catch` intrinsic
in instruction selection phase, so we only need to add `catch_all`
to the beginning of cleanup pads.
- `catch` is generated from instruction selection, but we need to
hoist the `catch` instruction to the beginning of every EH pad,
because `catch` can be in the middle of the EH pad or even in a
split BB from it after various code transformations.
- Removes `addExceptionExtraction` function, which was used to
generate `br_on_exn` before.
- CFGStackfiy: Deletes `fixUnwindMismatches` function. Running this
function on the new instruction causes crashes, and the new version
will be added in a later CL, whose contents will be completely
different. So deleting the whole function will make the diff easier to
read.
- Reenables all disabled tests in exception.ll and eh-lsda.ll and a
single basic test in cfg-stackify-eh.ll.
- Updates existing tests to use the new assembly format. And deletes
`br_on_exn` instructions from the tests and FileCheck lines.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94040
This patch replaces the AArch64StackOffset class by the generic one
defined in TypeSize.h.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D88983
