Now that load/store alignment is required, we no longer need most
of them. Also switch the getLoadStoreAlignment() helper to return
Align instead of MaybeAlign.
Along the lines of D77454 and D79968. Unlike loads and stores, the
default alignment is getPrefTypeAlign, to match the existing handling in
various places, including SelectionDAG and InstCombine.
Differential Revision: https://reviews.llvm.org/D80044
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
The fact that loads and stores can have the alignment missing is a
constant source of confusion: code that usually works can break down in
rare cases. So fix the LoadInst API so the alignment is never missing.
To reduce the number of changes required to make this work, IRBuilder
and certain LoadInst constructors will grab the module's datalayout and
compute the alignment automatically. This is the same alignment
instcombine would eventually apply anyway; we're just doing it earlier.
There's a minor risk that the way we're retrieving the datalayout
could break out-of-tree code, but I don't think that's likely.
This is the last in a series of patches, so most of the necessary
changes have already been merged.
Differential Revision: https://reviews.llvm.org/D77454
Summary:
This patch handles illegal scalable types when lowering IR operations,
addressing several places where the value of isScalableVector() is
ignored.
For types such as <vscale x 8 x i32>, this means splitting the
operations. In this example, we would split it into two
operations of type <vscale x 4 x i32> for the low and high halves.
In cases such as <vscale x 2 x i32>, the elements in the vector
will be promoted. In this case they will be promoted to
i64 (with a vector of type <vscale x 2 x i64>)
Reviewers: sdesmalen, efriedma, huntergr
Reviewed By: efriedma
Subscribers: david-arm, tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78812
We allocated a suitably aligned frame index so we know that all the values
have ABI alignment.
For MIPS this avoids using pair of lwl + lwr instructions instead of a
single lw. I found this when compiling CHERI pure capability code where
we can't use the lwl/lwr unaligned loads/stores and and were to falling
back to a byte load + shift + or sequence.
This should save a few instructions for MIPS and possibly other backends
that don't have fast unaligned loads/stores.
It also improves code generation for CodeGen/X86/pr34653.ll and
CodeGen/WebAssembly/offset.ll since they can now use aligned loads.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78999
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
Summary:
When generating code for the LLVM IR zeroinitialiser operation, if
the vector type is scalable we should be using SPLAT_VECTOR instead
of BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D78636
Using getValueType() is not correct for architectures extended with CHERI since
we need a pointer type and not the value that is loaded. While stack
protector is useless when you have CHERI (since CHERI provides much
stronger security guarantees), we still have a test to check that we can
generate correct code for checks. Merging b281138a1b67ca4405b77d774adc3de72742e7a2
into our tree broke this test. Fix by using TLI.getFrameIndexTy().
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D77785
Summary:
Remove asserting vector getters from Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: dexonsmith, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: cfe-commits, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D77278
I've always found the "findValue" a little odd and
inconsistent with other things in SDB.
This simplfifies the code in SDB to just handle a splat constant
address or a 2 operand GEP in the same BB. This removes the
need for "findValue" since the operands to the GEP are
guaranteed to be available. The splat constant handling is
new, but was needed to avoid regressions due to constant
folding combining GEPs created in CGP.
CGP is now responsible for canonicalizing gather/scatters into
this form. The pattern I'm using for scalarizing, a scalar GEP
followed by a GEP with an all zeroes index, seems to be subject
to constant folding that the insertelement+shufflevector was not.
Differential Revision: https://reviews.llvm.org/D76947
The "Align" passed into getMachineMemOperand etc. is the alignment of
the MachinePointerInfo, not the alignment of the memory operation.
(getAlign() on a MachineMemOperand automatically reduces the alignment
to account for this.)
We were passing on wrong (overconservative) alignment in a bunch of
places. Fix a bunch of these, mostly in legalization. And while I'm
here, switch to the new Align APIs.
The test changes are all scheduling changes: the biggest effect of
preserving large alignments is that it improves alias analysis, so the
scheduler has more freedom.
(I was originally just trying to do a minor cleanup in
SelectionDAGBuilder, but I accidentally went deeper down the rabbit
hole.)
Differential Revision: https://reviews.llvm.org/D77687
Summary:
No error or warning is emitted when specific reserved registers are
written to in inline assembly. Therefore, writes to the program counter
or to the frame pointer, for instance, were permitted, which could have
led to undesirable behaviour.
Example:
int foo() {
register int a __asm__("r7"); // r7 = frame-pointer in M-class ARM
__asm__ __volatile__("mov %0, r1" : "=r"(a) : : );
return a;
}
In contrast, GCC issues an error in the same scenario.
This patch detects writes to specific reserved registers in inline
assembly for ARM and emits an error in such case. The detection works
for output and input operands. Clobber operands are not handled here:
they are already covered at a later point in
AsmPrinter::emitInlineAsm(const MachineInstr *MI). The registers
covered are: program counter, frame pointer and base pointer.
This is ARM only. Therefore the implementation of other targets'
counterparts remain open to do.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76848
I only left it at the interface to ParseConstraints since that
needs updates to other callers in different files. I'll do that
as a follow up.
Differential Revision: https://reviews.llvm.org/D77892
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: stoklund, sdesmalen, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77272
These should not be assuming address space 0. Calling getPointerTy is
generally the wrong thing to do, since you should already know the
type from the incoming IR.
Summary:
A bug report mentioned that LLVM was producing jumps off the end of a
function when using "asm goto with outputs". Further digging pointed to
MachineBasicBlocks that had their address taken and were indirect
targets of INLINEASM_BR being removed by BranchFolder, because their
predecessor list was empty, so they appeared to have no entry.
This was a cascading failure caused earlier, during Pre-RA instruction
scheduling. We have a few special cases in Pre-RA instruction scheduling
where we split a MachineBasicBlock in two. This requires careful
handing of predecessor and successor lists for a MachineBasicBlock that
was split, and careful handing of PHI MachineInstrs that referred to the
MachineBasicBlock before it was split.
The clue that led to this fix was the observation that many callers of
MachineBasicBlock::splice() frequently call
MachineBasicBlock::transferSuccessorsAndUpdatePHIs() to update their PHI
nodes after a splice. We don't want to reuse that method, as we have
custom successor transferring logic for this block split.
This patch fixes 2 pre-existing bugs, and adds tests.
The first bug was that MachineBasicBlock::splice() correctly handles
updating most successors and predecessors; we don't need to do anything
more than removing the previous fallthrough block from the first half of
the split block post splice. Previously, we were updating the successor
list incorrectly (updating successors updates predecessors).
The second bug was that PHI nodes that needed registers from the first
half of the split block were not having entries populated. The register
live out information was correct, and the FuncInfo->PHINodesToUpdate was
correct. Specifically, the check in SelectionDAGISel::FinishBasicBlock:
for (unsigned i = 0, e = FuncInfo->PHINodesToUpdate.size(); i != e; ++i) {
MachineInstrBuilder PHI(*MF, FuncInfo->PHINodesToUpdate[i].first);
if (!FuncInfo->MBB->isSuccessor(PHI->getParent()))
continue;
PHI.addReg(FuncInfo->PHINodesToUpdate[i].second).addMBB(FuncInfo->MBB);
was `continue`ing because FuncInfo->MBB tracks the second half of
the post-split block; no one was updating PHI entries for the first half
of the post-split block.
SelectionDAGBuilder::UpdateSplitBlock() already expects to perform
special handling for MachineBasicBlocks that were split post calls to
ScheduleDAGSDNodes::EmitSchedule(), so I'm confident that it's both
correct for ScheduleDAGSDNodes::EmitSchedule() to return the second half
of the split block `CopyBB` which updates `FuncInfo->MBB` (ie. the
current MachineBasicBlock being processed), and perform special handling
for this in SelectionDAGBuilder::UpdateSplitBlock().
Reviewers: void, craig.topper, efriedma
Reviewed By: void, efriedma
Subscribers: hfinkel, fhahn, MatzeB, efriedma, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76961
The previous code used the type of the first field for the VT
passed to getNode for every field.
I've based the implementation here off what is done in visitSelect
as it removes the need to special case aggregates.
Differential Revision: https://reviews.llvm.org/D77093
Summary:
This is a roll forward of D77394 minus AlignmentFromAssumptions (which needs to be addressed separately)
Differences from D77394:
- DebugStr() now prints the alignment value or `None` and no more `Align(x)` or `MaybeAlign(x)`
- This is to keep Warning message consistent (CodeGen/SystemZ/alloca-04.ll)
- Removed a few unneeded headers from Alignment (since it's included everywhere it's better to keep the dependencies to a minimum)
Reviewers: courbet
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77537
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
Summary:
This change adds amdgcn.reloc.constant intrinsic to the amdgpu backend, which will compile into a relocation entry in the resulting elf.
The intrinsics takes a MetadataNode (String) as its only argument, which specifies the symbol name of the relocation entry.
`SelectionDAGBuilder::getValueImpl` is changed to allow metadata operands passed through to ISel.
Author: csyonghe <yonghe@google.com>
Reviewers: tpr, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76440
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
These transforms rely on a vector reduction flag on the SDNode
set by SelectionDAGBuilder. This flag exists because SelectionDAG
can't see across basic blocks so SelectionDAGBuilder is looking
across and saving the info. X86 is the only target that uses this
flag currently. By removing the X86 code we can remove the flag
and the SelectionDAGBuilder code.
This pass adds a dedicated IR pass for X86 that looks across the
blocks and transforms the IR into a form that the X86 SelectionDAG
can finish.
An advantage of this new approach is that we can enhance it to
shrink the phi nodes and final reduction tree based on the zeroes
that we need to concatenate to bring the partially reduced
reduction back up to the original width.
Differential Revision: https://reviews.llvm.org/D76649
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: dylanmckay, sdardis, nemanjai, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76551
Summary:
* Remove a bunch of asserts checking for unsupported scalable types and
add some more now that they are supported.
* Propagate the scalable flag where necessary.
* Add another `EVT::getExtendedVectorVT` method that takes an
ElementCount parameter.
* Add `EVT::isExtendedScalableVector` and
`EVT::getExtendedVectorElementCount` - latter is currently unused.
Reviewers: sdesmalen, efriedma, rengolin, craig.topper, huntergr
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75672
SelectionDAG CSEs nodes based on their result type and operands, but not their flags. The flags are expected to be intersected when they are CSEd. In SelectionDAGBuilder, for FP nodes we manage both the fast math flags and the nofpexcept flag after the nodes have already been CSEd when they were created with getNode. The management of the fastmath flags before the constrained nodes prevents the nofpexcept management from working correctly.
This commit moves the FMF handling for constrained intrinsics into their visitor and disables the common FMF handling for these nodes.
Differential Revision: https://reviews.llvm.org/D75224
I believe we were previously calculating a pointer info with the scalar base and an offset of 0. But that's not really where the gather is pointing. The offset is a function of the indices of the GEP we looked through.
Also set the size of the MachineMemOperand to UnknownSize
Differential Revision: https://reviews.llvm.org/D76157
Summary:
callbr's indirect branches aren't expected to be taken, so reduce their
probabilities to 0 while increasing the default destination to 1. This
allows some code improvements through block placement.
Reviewers: nickdesaulniers
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72656
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
Summary:
Terminators in LLVM aren't prohibited from returning values. This means that
the "callbr" instruction, which is used for "asm goto", can support "asm goto
with outputs."
This patch removes all restrictions against "callbr" returning values. The
heavy lifting is done by the code generator. The "INLINEASM_BR" instruction's
a terminator, and the code generator doesn't allow non-terminator instructions
after a terminator. In order to correctly model the feature, we need to copy
outputs from "INLINEASM_BR" into virtual registers. Of course, those copies
aren't terminators.
To get around this issue, we split the block containing the "INLINEASM_BR"
right before the "COPY" instructions. This results in two cheats:
- Any physical registers defined by "INLINEASM_BR" need to be marked as
live-in into the block with the "COPY" instructions. This violates an
assumption that physical registers aren't marked as "live-in" until after
register allocation. But it seems as if the live-in information only
needs to be correct after register allocation. So we're able to get away
with this.
- The indirect branches from the "INLINEASM_BR" are moved to the "COPY"
block. This is to satisfy PHI nodes.
I've been told that MLIR can support this handily, but until we're able to
use it, we'll have to stick with the above.
Reviewers: jyknight, nickdesaulniers, hfinkel, MaskRay, lattner
Reviewed By: nickdesaulniers, MaskRay, lattner
Subscribers: rriddle, qcolombet, jdoerfert, MatzeB, echristo, MaskRay, xbolva00, aaron.ballman, cfe-commits, JonChesterfield, hiraditya, llvm-commits, rnk, craig.topper
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D69868
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
This includes both GEPs where the indexed type is a scalable vector, and
GEPs where the result type is a scalable vector.
Differential Revision: https://reviews.llvm.org/D73602
Summary:
Backends should fold the subtraction into the comparison, but not all
seem to. Moreover, on targets where pointers are not integers, such as
CHERI, an integer subtraction is not appropriate. Instead we should just
compare the two pointers directly, as this should work everywhere and
potentially generate more efficient code.
Reviewers: bogner, lebedev.ri, efriedma, t.p.northover, uweigand, sunfish
Reviewed By: lebedev.ri
Subscribers: dschuff, sbc100, arichardson, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74454
