They operate like Defined symbols but with no associated InputSection.
Note that `ld64` seems to treat the weak definition flag like a no-op for
absolute symbols, so I have replicated that behavior.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D87909
Apparently this is used in real programs. I've handled this by reusing
the logic we already have for branch (function call) relocations.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D87852
Not 100% sure but it appears that bundles are almost identical to
dylibs, aside from the fact that they do not contain `LC_ID_DYLIB`. ld64's code
seems to treat bundles and dylibs identically in most places.
Supporting bundles allows us to run e.g. XCTests, as all test suites are
compiled into bundles which get dynamically loaded by the `xctest` test runner.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D87856
* Implement rebase opcodes. Rebase opcodes tell dyld where absolute
addresses have been encoded in the binary. If the binary is not loaded
at its preferred address, dyld has to rebase these addresses by adding
an offset to them.
* Support `-pie` and use it to test rebase opcodes.
This is necessary for absolute address references in dylibs, bundles etc
to work.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D87199
The R2 save stub will now support offsets up to 64 bits.
There are three cases that will be used.
1) The offset fits in 26 bits.
```
b <26 bit offset>
```
2) The offset does not fit in 26 bits but fits in 34 bits.
```
paddi r12, 0, <34 bit offset>, 1
mtctr r12
bctr
```
3) The offset does not fit in 34 bits. Since this is an R2 save stub we can use
the TOC in R2. We are not loading the offset but the actual address we want to
branch to.
```
addis r12, r2, <address in TOC lo>
ld r12 <address in TOC hi>(r12)
mtctr r12
bctr
```
In case 1) the stub is only 8 bytes while in cases 2) and 3) the stub will be
20 bytes.
Reviewed By: MaskRay, sfertile, NeHuang
Differential Revision: https://reviews.llvm.org/D87916
https://github.com/WebAssembly/threads/issues/144 updated the
WebAssembly threads proposal to make atomic operations on unshared memories
valid. This change updates the feature checking in the linker accordingly.
Production WebAssembly engines have recently been updated to allow this
behvaior, but after this change users who accidentally use atomics with unshared
memories on older versions of the engines will get validation errors at runtime
rather than link errors.
Differential Revision: https://reviews.llvm.org/D79530
Library users should not need to call errorHandler().reset() explicitly.
google/iree calls lld:🧝:link and without the patch some global
variables are not cleaned up in the next invocation.
".text.split." holds symbols which are split out from functions in
other input sections. For example, with -fsplit-machine-functions,
placing the cold parts in .text.split instead of .text.unlikely mitigates
against poor profile inaccuracy. Techniques such as hugepage remapping can
make conservative decisions at the section granularity.
Differential Revision: https://reviews.llvm.org/D87840
Fix earlier build break via a static_cast.
This reverts commit 8112d494d344dc0935d5c078f066a43d7c984e0c.
Differential Revision: https://reviews.llvm.org/D86909
In lit tests, we run each LLD invocation twice (LLD_IN_TEST=2), without shutting down the process in-between. This ensures a full cleanup is properly done between runs.
Only active for the COFF driver for now. Other drivers still use LLD_IN_TEST=1 which executes just one iteration with full cleanup, like before.
When the environment variable LLD_IN_TEST is unset, a shortcut is taken, only one iteration is executed, no cleanup for faster exit, like before.
A public API, lld::safeLldMain(), is also available when using LLD as a library.
Differential Revision: https://reviews.llvm.org/D70378
Before this patch, these two tests were emitting both a .DLL and .LIB. The output .LIB file name also happens to be an input .LIB file name. This prevented the test from executing a second time when LLD is re-entrant (LLD_IN_TEST=2).
This is a support patch for https://reviews.llvm.org/D70378.
This patch expands two LTO test cases to check other aspects.
1) weak.ll has been expanded to show that it doesn't matter whether the
first appearance of a weak symbol appears in a bitcode file or native
object - that one is picked.
2) reproduce-lto.ll has been expanded to show that the bitcode files are
stored in the reproduce package and that intermediate files (such as
the LTO-compiled object) are not.
Differential Revision: https://reviews.llvm.org/D88094
Reviewed by: grimar, MaskRay
* Move computation of systemLibraryRoots into a separate function, so we
can add more functionality to it without things becoming unwieldy
* Have `getSearchPaths` and related functions return by value instead of
by output parameter. NRVO should ensure that performance is unaffected.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D87959
They cause their corresponding libraries / frameworks to be loaded via
`LC_LOAD_WEAK_DYLIB` instead of `LC_LOAD_DYLIB`.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D87929
Handle the case where there are both common and non-common definitions
of the same symbol. Add a bunch of tests to ensure compatibility with ld64.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D86910
On Unix, it is traditionally allowed to write variable definitions without
initialization expressions (such as "int foo;") to header files. These are
called tentative definitions.
The compiler creates common symbols when it sees tentative definitions. When
linking the final binary, if there are remaining common symbols after name
resolution is complete, the linker converts them to regular defined symbols in
a `__common` section.
This diff implements most of that functionality, though we do not yet handle
the case where there are both common and non-common definitions of the same
symbol.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D86909
Remove all spurious `HelpHidden` flags from `lld/MachO/Options.td`. Add test for `HelpHidden` to `warnIfUnimplementedOption()` so that the empty `// handled elsewhere` case is unnecessary.
Reviewed By: #lld-macho, int3, smeenai
Differential Revision: https://reviews.llvm.org/D88160
The word "target" is overloaded, so lighten its load by using another word to denote the symbol or section to which a reloc points. While more stilted than "target", "referent" is rather less pompous than "designatum" or "denotatum". :P
Along the way, make a few neighboring variable names more descriptive.
Reviewed By: #lld-macho, int3
Differential Revision: https://reviews.llvm.org/D87584
ld64 is cool with leading `0x` for hex command-line args, and we should be also.
Reviewed By: #lld-macho, int3
Differential Revision: https://reviews.llvm.org/D88065
Stifle the warning for unimplemented option `-dyamic`, since it is already the default. Add `Config::staticLink` and skeletal support for altering the flag, but otherwise leave the option `-static` as hidden and its warning in place.
Differential Revision: https://reviews.llvm.org/D88045
Update the thunk range error report for PPC64PCRelLongBranchThunk and add a range
error test case for PPC64R12SetupStub.
Differential Revision: https://reviews.llvm.org/D87381
Add Thread Local Storage Initial Exec support to LLD.
This patch adds the computation for the relocations as well as the relaxation from Initial Exec to Local Exec.
Initial Exec:
```
pld r9, x@got@tprel@pcrel
add r9, r9, x@tls@pcrel
```
or
```
pld r9, x@got@tprel@pcrel
lbzx r10, r9, x@tls@pcrel
```
Note that @tls@pcrel is actually encoded as R_PPC64_TLS with a one byte displacement.
For the above examples relaxing Intitial Exec to Local Exec:
```
paddi r9, r9, x@tprel
nop
```
or
```
paddi r9, r13, x@tprel
lbz r10, 0(r9)
```
Reviewed By: nemanjai, MaskRay, #powerpc
Differential Revision: https://reviews.llvm.org/D86893
Large files are cumbersome on some filesystems and can more easily trigger ENOSPC.
Some tests use two text sections with output section addresses to test branch ranges.
Use two text segments to prevent LLD from filling the gap and unnecessarily increasing the output size.
With this change, there is no test/ELF temporary file larger than 100MiB.
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D88037
A repeated typo in lld/test/ELF/map-file.s prevented a number of checks from being executed.
CHECk-NEXT -> CHECK-NEXT
^ ^
After correcting the typo, a small adjustment was needed to match the size of the synthetic .comment section (which always contains "LLD 1.0" in the test environment).
Differential revision: https://reviews.llvm.org/D88023
The additional testing is testing we previously had in a downstream test
suite.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D87824
We didn't notice this earlier this we were only testing the export trie
encoded in a dylib, whose image base starts at zero. But a regular
executable contains `__PAGEZERO`, which means it has a non-zero image
base. This bug was discovered after attempting to run some programs that
performed `dlopen` on an executable.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D87780
Digest the input `__LD,__compact_unwind` and produce the output `__TEXT,__unwind_info`. This is the initial commit with the major functionality.
Successor commits will add handling for ...
* `__TEXT,__eh_frame`
* personalities & LSDA
* `-r` pass-through
Differential Revision: https://reviews.llvm.org/D86805
Extending the lifetime of these type index mappings does increase memory
usage (+2% in my case), but it decouples type merging from symbol
merging. This is a pre-requisite for two changes that I have in mind:
- parallel type merging: speeds up slow type merging
- defered symbol merging: avoid heap allocating (relocating) all symbols
This eliminates CVIndexMap and moves its data into TpiSource. The maps
are also split into a SmallVector and ArrayRef component, so that the
ipiMap can alias the tpiMap for /Z7 object files, and so that both maps
can simply alias the PDB type server maps for /Zi files.
Splitting TypeServerSource establishes that all input types to be merged
can be identified with two 32-bit indices:
- The index of the TpiSource object
- The type index of the record
This is useful, because this information can be stored in a single
64-bit atomic word to enable concurrent hashtable insertion.
One last change is that now all object files with debugChunks get a
TpiSource, even if they have no type info. This avoids some null checks
and special cases.
Differential Revision: https://reviews.llvm.org/D87736
Bitcode writer does not flush buffer until the end by default. This is
fine to small bitcode files. When -flto,--plugin-opt=emit-llvm,-gmlt are
used, the final bitcode file is large, for example, >8G. Keeping all
data in memory consumes a lot of memory.
This change allows bitcode writer flush data to disk early when buffered
data size is above some threshold. This is only enabled when lld emits
LLVM bitcode.
One issue to address is backpatching bitcode: subblock length, function
body indexes, meta data indexes need to backfill. If buffer can be
flushed partially, we introduced raw_fd_stream that supports
read/seek/write, and enables backpatching bitcode flushed in disk.
Reviewed-by: tejohnson, MaskRay
Differential Revision: https://reviews.llvm.org/D86905
I have noticed that a 374MiB powerpc64le 'ld.lld' requires 11 passes to link.
There is a ThunkSection (whose parent OutputSection is ".text" of 169MiB) with 12867 thunks.
Optimize the filename glob pattern matching in
LinkerScript::computeInputSections() and LinkerScript::shouldKeep().
Add InputFile::getNameForScript() which gets and if required caches the
Inputfile's name used for linker script matching. This avoids the
overhead of name creation that was in getFilename() in LinkerScript.cpp.
Add InputSectionDescription::matchesFile() and
SectionPattern::excludesFile() which perform the glob pattern matching
for an InputFile and make use of a cache of the previous result. As both
computeInputSections() and shouldKeep() process sections in order and
the sections of the same InputFile are contiguous, these single entry
caches can significantly speed up performance for more complex glob
patterns.
These changes have been seen to reduce link time with --gc-sections by
up to ~40% with linker scripts that contain KEEP filename glob patterns
such as "*crtbegin*.o".
Differential Revision: https://reviews.llvm.org/D87469
