Caused by D86662. The fix is only checking some fields when the expect_debug_info_size flag is true. For some reason this was not failing on a local linux machine.
The tests seem to be timing out in all linux bots. Need further analysis.
Revert "run in terminal"
This reverts commit de6caf871be79dc7549aebe4e4fb57d52f6ed202.
The Symbol Status in modules view is simplified so that only when the module has debug info and its size is non-zero, will the status message be displayed. The symbol status message is renamed to debug info size and flag message like "Symbols not found" and "Symbols loaded" is deleted.
Differential Revision: https://reviews.llvm.org/D86662
If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D83731
Summary: If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewers: wallace, clayborg
Reviewed By: wallace, clayborg
Subscribers: cfe-commits, aprantl, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D83731
Summary:
test_terminate_commands is flaky on LLDB Arm buildbot as well. It was already
being skipped for aarch64. I am going to mark it skipped for Arm too.
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
Always clean up subprocesses on tear down instead of relying on the
caller to do so. This is not only less error prone but also means the
tests can be more concise.
Differential revision: https://reviews.llvm.org/D83787
Original commit c60216db15132401ff60c08ccef899321f63b6b6.
The test can only run on Darwin because of how it was setup, so I'm
enforcing that.
Summary:
Test Plan:
Reviewers:
Subscribers:
Tasks:
Tags:
This reverts commit 881af6eb0030986876d3b80668193e5c3c04a87c.
Revert "[lldb-vscode] Add Compile Unit List to Modules View"
This reverts commit 03ef61033ff5e1e40518f14f642e4ad8d686974c.
Revert "[lldb-vscode] Add Support for Module Event"
This reverts commit f7f80159753ba725f7e32529fcc369bc358efbb3.
The debian buildbot has reported issues with the modules test.
http://lab.llvm.org:8011/builders/lldb-x86_64-debian/builds/13767/steps/test/logs/stdio
Reverting it for now.
For some reason this works on the original author's machine, but not on my. So I'm using a safer approach of using an unstripped dynamic library to place breakpoints on. The author was placing a breakpoint on the main symbol of a stripped library and for some reason it worked on their machine, but it shouldn't have...
Offender diff: D82477
Summary: User can expand and check compile unit list for the modules that have debug info.
Reviewers: wallace, clayborg
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83072
Summary:
Whenever a module is created, removed or changed, lldb-vscode is now sending an event that can be interpreted by the IDE so that modules can be rendered in the IDE, like the tree view in this screenshot
{F12229758}
Reviewers: wallace, clayborg, kusmour, aadsm
Reviewed By: clayborg
Subscribers: cfe-commits, labath, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D82477
Summary:
These two tests are flaky on lldb Arm buildbot as well. They are already
being skipped for aarch64. I am going to mark them skipped for Arm.
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
Summary:
This redoes https://reviews.llvm.org/D79726 and fixes two things.
- The logic that determines whether to automatically disconnect during the tear down is not very dumb compared to the original implementation. Each test will determine whether to do that or not.
- The terminate commands and terminate event were being sent after the disconnect response was sent to the IDE. That was not good, as VSCode stops the debug session as soon as it receives a disconnect response. Now, the terminate event and terminateEvents are being executed before the disconnect response is sent. This ensures that any connection between the IDE and lldb-vscode is alive while the terminate commands are executed. Besides, it also allows displaying the output of the terminate commands on the debug console, as it's still alive.
Reviewers: clayborg, aadsm, kusmour, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
Summary:
Recently I've noticed that VSCode sometimes doesn't send the terminateDebuggee flag within the disconnectRequest,
even though lldb-vscode sets the terminateDebuggee capability correctly.
This has been causing that inferiors don't die after the debug session ends, and many users have reported issues because of this.
An easy way to mitigate this is to set better default values for the terminateDebuggee field in the disconnect request.
I'm assuming that for a launch request, the default will be true, and for attach it'll be false.
Reviewers: clayborg, labath, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81200
Summary: Adding this in line with "stopCommands" and "exitCommands" so that we can run commands at the end of the debugging session.
Reviewers: clayborg, wallace, labath
Reviewed By: clayborg, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D79726
Summary:
Currently loading core files on lldb-vscode is broken because there's a check in the attach workflow that asserts that the PID is valid, which of course fails for this case.
Hence, I'm adding a "coreFile" argument for the attach request, which does the work correctly.
I don't know how to test it effectively so that it runs on the buildbots and the debugger can in fact makes sense of it. Anyway, the change has been relatively simple.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D78839
Summary:
When using source maps for a breakpoint, in order to find the actual source that breakpoint has resolved, we
need to use a query similar to what CommandObjectSource::DumpLinesInSymbolContexts does, which is the logic
used by the CLI to display the source line at a given breakpoint. That's necessary because from a breakpoint
location you only have an address, which points to the original source location, not the source mapped one.
in the setBreakpoints request handler, we haven't been doing such query and we were returning the original
source location, which was breaking the UX of VSCode, as many breakpoints were being set but not displayed
in the source file next to each line. Besides, clicking the source path of a breakpoint in the breakpoints
view in the debug tab was not working for this case, as VSCode was trying to open a non-existent file, thus
showing an error to the user.
Ideally, we should do the query mentioned above to find the actual source location to respond to the IDE,
however, that query is expensive and users can have an arbitrary number of breakpoints set. As a simpler fix,
the request sent by VSCode already contains the full source path, which exists because the user set it from
the IDE itself, so we can simply reuse it instead of querying from the SB API.
I wrote a test for this, and found out that I had to move SetSourceMapFromArguments after RunInitCommands in
lldb-vscode.cpp, because an init command used in all tests is `settings clear -all`, which would clear the
source map unless specified after initCommands. And in any case, I think it makes sense to have initCommands
run before anything the debugger would do.
Reviewers: clayborg, kusmour, labath, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76968
Summary: The IDE has no packets that are sent to lldb-vscode that say which thread and frame are selected. The only way we know is we get a request for variables for a stack frame via a "scopes" request. When we receive this packet we make that thread and frame the selected thread and frame in lldb. This way when people execute lldb commands in the debug console by prefixing the expression with the backtick character, we will have the right thread and frame selected. Previously this was not updated as new stack frames were selected.
Reviewers: labath, aadsm, wallace, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77347
Summary:
The DAP specifies the following for the SetBreakpoints request:
The breakpoints returned are in the same order as the elements of the 'breakpoints' arguments
This was not followed, as lldb-vscode was returning the breakpoints in a different order, because they were first stored into a map, and then traversed. Of course, maps normally don't preserve ordering.
See this log I captured:
-->
{"command":"setBreakpoints",
"arguments":{
"source":{
"name":"main.cpp",
"path":"/Users/wallace/fbsource/xplat/sand/test-projects/buck-cpp/main.cpp"
},
"lines":[6,10,11],
"breakpoints":[{"line":6},{"line":10},{"line":11}],
"sourceModified":false
},
"type":"request",
"seq":3
}
<--
{"body":{
"breakpoints":[
{"id":1, "line":11,"source":{"name":"main.cpp","path":"xplat/sand/test-projects/buck-cpp/main.cpp"},"verified":true},
{"id":2,"line":6,"source":{"name":"main.cpp","path":"xplat/sand/test-projects/buck-cpp/main.cpp"},"verified":true},
{"id":3,"line":10,"source":{"name":"main.cpp","path":"xplat/sand/test-projects/buck-cpp/main.cpp"},"verified":true}]},
"command":"setBreakpoints",
"request_seq":3,
"seq":0,
"success":true,
"type":"response"
}
As you can see, the order was not respected. This was causing the IDE not to be able to disable/enable breakpoints by clicking on them in the breakpoint view in the lower corner of the Debug tab.
This diff fixes the ordering problem. The traversal + querying was done very fast in O(nlogn) time. I'm keeping the same complexity.
I also updated a couple of tests to account for the ordering.
Reviewers: clayborg, aadsm, kusmour, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76891
Summary:
If no custom launching is used, lldb-vscode launches a program with an empty environment by default. In some scenarios, the user might want to simply use the same environment as the IDE to have a set of working environment variables (e.g. PATH wouldn't be empty). In fact, most DAPs in VSCode have this behavior by default. In other cases the user definitely needs to set their custom environment, which is already supported. To make the first case easier for the user (e.g. not having to copy the PATH to the launch.json every time they want to debug simple programs that rely on PATH), a new option is now offered. inheritEnvironment will launch the program copying its own environment, and it's just a boolean flag.
{F11347695}
Reviewers: clayborg, aadsm, diazhector98, kusmour
Subscribers: labath, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74636
Summary:
On Linux, when executing lldb-vscode on a remote machine, lldb-vscode doesn't die after the debug session ends. It keeps trying to read JSON input to no avail.
This diff indicates lldb-vscode to stop reading after a termination event has been processed.
Reviewers: clayborg, aadsm, kusmour
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76314
Summary: The VS Code DAP expects on response for each breakpoint that was requested. If we responsd with multiple entries for one breakpoint the VS Code UI gets out of date. Currently the VS code DAP doesn't handle one breakpoint with multiple locations. If this ever gets fixed we can modify our code.
Reviewers: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73665
Summary:
The error message from the construct `assertTrue(a == b, "msg") ` are nearly always completely useless for actually debugging the issue.
This patch is just replacing this construct (and similar ones like `assertTrue(a != b, ...)` with the proper call to assertEqual or assertNotEquals.
This patch was mostly written by a shell script with some manual verification afterwards:
```
lang=python
import sys
def sanitize_line(line):
if line.strip().startswith("self.assertTrue(") and " == " in line:
line = line.replace("self.assertTrue(", "self.assertEquals(")
line = line.replace(" == ", ", ", 1)
if line.strip().startswith("self.assertTrue(") and " != " in line:
line = line.replace("self.assertTrue(", "self.assertNotEqual(")
line = line.replace(" != ", ", ", 1)
return line
for a in sys.argv[1:]:
with open(a, "r") as f:
lines = f.readlines()
with open(a, "w") as f:
for line in lines:
f.write(sanitize_line(line))
```
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74475
Summary: Moves lldbsuite tests to lldb/test/API.
This is a largely mechanical change, moved with the following steps:
```
rm lldb/test/API/testcases
mkdir -p lldb/test/API/{test_runner/test,tools/lldb-{server,vscode}}
mv lldb/packages/Python/lldbsuite/test/test_runner/test lldb/test/API/test_runner
for d in $(find lldb/packages/Python/lldbsuite/test/* -maxdepth 0 -type d | egrep -v "make|plugins|test_runner|tools"); do mv $d lldb/test/API; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-vscode -maxdepth 1 -mindepth 1 | grep -v ".py"); do mv $d lldb/test/API/tools/lldb-vscode; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-server -maxdepth 1 -mindepth 1 | egrep -v "gdbremote_testcase.py|lldbgdbserverutils.py|socket_packet_pump.py"); do mv $d lldb/test/API/tools/lldb-server; done
```
lldb/packages/Python/lldbsuite/__init__.py and lldb/test/API/lit.cfg.py were also updated with the new directory structure.
Reviewers: labath, JDevlieghere
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71151
