This patch is the initial support for the Local Dynamic Thread Local Storage
model to produce code sequence and relocation correct to the ABI for the model
when using PC relative memory operations.
Differential Revision: https://reviews.llvm.org/D87721
This patch is the initial support for the Local Exec Thread Local
Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: Kamau Bridgeman
Differential Revision: https://reviews.llvm.org/D83404
From ISA, fcmpu will raise the Floating-Point Invalid Operation
Exception (SNaN) if either of the operands is a Signaling NaN by setting
the bit VXSNAN. But the instruction description didn't set the
mayRaiseFPException which might have impact on the scheduling or some
backend optimization.
Reviewed By: qiucf
Differential Revision: https://reviews.llvm.org/D83937
22a0edd0 introduced a config IsStrictFPEnabled, which controls the
strict floating point mutation (transforming some strict-fp operations
into non-strict in ISel). This patch disables the mutation by default
since we've finished PowerPC strict-fp enablement in backend.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D87222
Libcall __gcc_qtou is not available, which breaks some tests needing
it. On PowerPC, we have code to manually expand the operation, this
patch applies it to constrained conversion. To keep it strict-safe,
it's using the algorithm similar to expandFP_TO_UINT.
For constrained operations marking FP exception behavior as 'ignore',
we should set the NoFPExcept flag. However, in some custom lowering
the flag is missed. This should be fixed by future patches.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D86605
This patch adds support for constrained scalar int to fp operations on
PowerPC. Besides, this also fixes the FP exception bit of FCFID*
instructions.
Reviewed By: steven.zhang, uweigand
Differential Revision: https://reviews.llvm.org/D81669
This patch is the initial support for the General Dynamic Thread Local
Local Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: NeHuang
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D82315
This patch adds support for constrained scalar fp to int operations on
PowerPC. Besides, this fixes the FP exception bit of quad-precision
convert & truncate instructions.
Reviewed By: steven.zhang, uweigand
Differential Revision: https://reviews.llvm.org/D81537
This patch introduces two intrinsics: llvm.ppc.setflm and
llvm.ppc.readflm. They read from or write to FPSCR register
(floating-point status & control) which contains rounding mode and
exception status.
To ensure correctness of program, we need to prevent FP operations from
being moved across these intrinsics (mffs/mtfsf instruction), so here I
set them as scheduling boundaries. We can relax such restriction if
FPSCR is modeled well in the future.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D84914
This is a refactor patch to prepare for adding the support for strict-fsetcc
in PowerPC backend. We want to move their definition into a uniform way so that,
we could add the strict node easier.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D81712
Summary:
Some instructions have set the wrong [RM] flag, this patch is to fix it.
Instructions x(v|s)r(d|s)pi[zmp]? and fri[npzm] use fixed rounding
directions without referencing current rounding mode.
Also, the SETRNDi, SETRND, BCLRn, MTFSFI, MTFSB0, MTFSB1, MTFSFb,
MTFSFI, MTFSFI_rec, MTFSF, MTFSF_rec should also fix the RM flag.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D81360
Currently the instruction paddi always takes s34imm as the type for the
34 bit immediate. However, the PC Relative form of the instruction should
not produce the same fixup as the non PC Relative form.
This patch splits the s34imm type into s34imm and s34imm_pcrel so that two
different fixups can be emitted.
Reviewed By: nemanjai, #powerpc, kamaub
Differential Revision: https://reviews.llvm.org/D83255
Current powerpc backend generates wrong code sequence if stack pointer
has to realign if `-fstack-clash-protection` enabled. When probing
dynamic stack allocation, current `PREPARE_PROBED_ALLOCA` takes
`NegSizeReg` as input and returns
`FinalStackPtr`. `FinalStackPtr=StackPtr+ActualNegSize` is calculated
correctly, however code following `PREPARE_PROBED_ALLOCA` still uses
value of `NegSizeReg`, which does not contain `ActualNegSize` if
`MaxAlign > TargetAlign`, to calculate loop trip count and residual
number of bytes.
This patch is part of fix of
https://bugs.llvm.org/show_bug.cgi?id=46759.
Differential Revision: https://reviews.llvm.org/D84152
SUMMARY:
when we call memset, memcopy,memmove etc(this are llvm intrinsic function) in the c source code. the llvm will generate IR
like call call void @llvm.memset.p0i8.i32(i8* align 4 bitcast (%struct.S* @s to i8*), i8 %1, i32 %2, i1 false)
for c source code
bash> cat test_memset.call
struct S{
int a;
int b;
};
extern struct S s;
void bar() {
memset(&s, s.b, s.b);
}
like
%struct.S = type { i32, i32 }
@s = external global %struct.S, align 4
; Function Attrs: noinline nounwind optnone
define void @bar() #0 {
entry:
%0 = load i32, i32* getelementptr inbounds (%struct.S, %struct.S* @s, i32 0, i32 1), align 4
%1 = trunc i32 %0 to i8
%2 = load i32, i32* getelementptr inbounds (%struct.S, %struct.S* @s, i32 0, i32 1), align 4
call void @llvm.memset.p0i8.i32(i8* align 4 bitcast (%struct.S* @s to i8*), i8 %1, i32 %2, i1 false)
ret void
}
declare void @llvm.memset.p0i8.i32(i8* nocapture writeonly, i8, i32, i1 immarg) #1
If we want to let the aix as assembly compile pass without -u
it need to has following assembly code.
.extern .memset
(we do not output extern linkage for llvm instrinsic function.
even if we output the extern linkage for llvm intrinsic function, we should not out .extern llvm.memset.p0i8.i32,
instead of we should emit .extern memset)
for other llvm buildin function floatdidf . even if we do not call these function floatdidf in the c source code(the generated IR also do not the call __floatdidf . the function call
was generated in the LLVM optimized.
the function is not in the functions list of Module, but we still need to emit extern .__floatdidf
The solution for it as :
We record all the lllvm intrinsic extern symbol when transformCallee(), and emit all these symbol in the AsmPrinter::doFinalization(Module &M)
Reviewers: jasonliu, Sean Fertile, hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D78929
Currently the instruction paddi always takes s34imm as the type for the
34 bit immediate. However, the PC Relative form of the instruction should
not produce the same fixup as the non PC Relative form.
This patch splits the s34imm type into s34imm and s34imm_pcrel so that two
different fixups can be emitted.
Reviewed By: kamaub, nemanjai
Differential Revision: https://reviews.llvm.org/D83255
This patch is part of supporting `-fstack-clash-protection`. Implemented
probing when emitting prologue.
Differential Revision: https://reviews.llvm.org/D81460
This patch is part of supporting `-fstack-clash-protection`. Mainly do
such things compared to existing `lowerDynamicAlloc`
- Added a new pseudo instruction PPC::PREPARE_PROBED_ALLOC to get
actual frame pointer and final stack pointer.
- Synthesize a loop to probe by blocks.
- Use DYNAREAOFFSET to get MaxCallFrameSize which is calculated in
prologepilog.
Differential Revision: https://reviews.llvm.org/D81358
There are two uses of TM (instance of TargetMachine) when checking options.
These will not work once we enable GlobalISel. This patch replaces those uses of
TM with Subtarget->getTargetMachine().
This patch adds LLVM intrinsics for the dcbt (Data Cache Block Touch),
dcbtst (Data Cache Block Touch for Store) and isync (Instruction
Synchronize) instructions.
The intrinsic for dcbt and dcbst in this patch are named llvm.ppc.dcbt.with.hint
and llvm.ppc.dcbtst.with.hint respectively as there already exists an intrinsic
for llvm.ppc.dcbt and llvm.ppc.dcbtst. However, the original variants of the
intrinsics do not accept the TH immediate field, whereas these variants do.
Differential Revision: https://reviews.llvm.org/D79633
Summary:
In preparation for GlobalISel, PPCSubTarget needs to be renamed to Subtarget as there places in GlobalISel that assume the presence of the variable Subtarget.
This patch introduces the variable Subtarget, and replaces all existing uses of PPCSubTarget with Subtarget. A subsequent patch will remove the definiton of
PPCSubTarget, once any downstream users have the opportunity to rename any uses they have.
Reviewers: hfinkel, nemanjai, jhibbits, #powerpc, echristo, lkail
Reviewed By: #powerpc, echristo, lkail
Subscribers: echristo, lkail, wuzish, nemanjai, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81623
Summary:
We have defined MTSPR/MFSPR and MTSPR8/MFSPR8, but we only defined
mtspr/mfspr InstAlias for some MTSPR/MFSPR.
This patch is to add the InstAlias definitions for MTSPR8/MFSPR8,
and add the some new mtspr/mfspr InstAlias we may use.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D77531
This patch adds handling of constrained FP intrinsics about round,
truncate and extend for PowerPC target, with necessary tests.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D64193
The previous implementation used "asm parser only" pseudo-instructions in their
output patterns. Those are not meant to emit code and will caused crashes when
built with -filetype=obj.
Differential Revision: https://reviews.llvm.org/D80151
On PowerPC, FNMSUB (both VSX and non-VSX version) means -(a*b-c). But
the backend used to generate these instructions regardless whether nsz
flag exists or not. If a*b-c==0, such transformation changes sign of
zero.
This patch introduces PPC specific FNMSUB ISD opcode, which may help
improving combined FMA code sequence.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D76585
These two nodes were added by 69caef2b781130a7d0eeaf8898eb346b6423ae03 in 2005
and they are not used by PowerPC backend anymore. And the ISD::FMA is a prefer
way for VMADDFP if we really want to create that node. For VNMSUBFP, we will
also add a more generic node FNMSUB in D76585 if we really want it.
Reviewed By: qiucf
Differential Revision: https://reviews.llvm.org/D80429
This patch adds strict-fp intrinsics support for fma, fsqrt, fmaxnum and
fminnum on PowerPC.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D72749
Add initial support for PC Relative addressing for constant pool loads.
This includes adding a new relocation for @pcrel and adding a new PowerPC flag
to identify PC relative addressing.
Differential Revision: https://reviews.llvm.org/D74486
On PowerPC most functions require a valid TOC pointer.
This is the case because either the function itself needs to use this
pointer to access the TOC or because other functions that are called
from that function expect a valid TOC pointer in the register R2.
The main exception to this is leaf functions that do not access the TOC
since they are guaranteed not to need a valid TOC pointer.
This patch introduces a feature that will allow more functions to not
require a valid TOC pointer in R2.
Differential Revision: https://reviews.llvm.org/D73664
Summary:
The linker is free to relax this (relocation R_PPC_GOT_TPREL16) against
R_PPC_TLS, if it sees fit (initial exec to local exec). If r0 is used,
this can generate execution-invalid code (converts to 'addi %rX, %r0,
FOO, which translates in PPC-lingo to li %rX, FOO). Forbid this
instead.
This fixes static binaries using locales on FreeBSD/powerpc
(tested on FreeBSD/powerpcspe).
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D76662
Summary:
Below InstAlias have been redefined, this patch is to remove the repeated
definition.
mtdec/mfdec mtsdr1/mfsdr1 mtsrr0/mfsrr0 mtsrr1/mfsrr1 mtasr
Reviewed By: nemanjai, steven.zhang
Differential Revision: https://reviews.llvm.org/D75821
The PPCISD::SExtVElems was added by commit https://reviews.llvm.org/D34009. However,
we have another ISD node ISD::SIGN_EXTEND_INREG that perfectly match the semantics
of SExtVElems. And the DAGCombiner has some combine rules for SIGN_EXTEND_INREG
that produce better code.
Differential Revision: https://reviews.llvm.org/D70771
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
