This reverts commit r225000, r225021, r225083, r225086, r225090.
The root change (r225000) still has several issues where it's caused
calls to be emitted without debug locations. This causes assertion
failures if/when those calls are inlined.
I'll work up some test cases and fixes before recommitting this.
llvm-svn: 225555
PR22096 has several test cases that assert that look fairly different. I'm
adding one of those as an automated test, but when relanding the other cases
should probably be checked as well.
llvm-svn: 225361
r225000 generalized debug info line info handling for expressions such
that this code is no longer necessary.
This removes the last use of CGDebugInfo::getLocation, but not all the
uses of CGDebugInfo::CurLoc, which is still used internally in
CGDebugInfo. I'd like to do away with all of that & might succeed after
a few more patches.
llvm-svn: 225085
The optimization (that appears to have been here since the earliest
implementation (r50848) & has become more complicated over the years) to
avoid recreating the debugloc if it would be the same was out of date
because ApplyDebugLocation was not re-updating the CurLoc/PrevLoc. This
optimization doesn't look terribly beneficial/necessary, so I'm removing
it - if it turns up in benchmarks, I'm happy to reconsider/reimplement
this with justification, but for now it just seems to add
complexity/problems.
llvm-svn: 225083
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225000
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224941
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224385
When emitting nested block definitions, the insert-at-point variant of
DIBuilder::insertDeclare() could be called with the insertion point set
to the end-of-BasicBlock sentinel, causing the parent pointer of the
CallInst to be set to the intentionally bogus value of the sentinel.
Fixed by conditionally invoking the correct version of insertDeclare().
rdar://problem/19034882
llvm-svn: 222487
Currently this function would return nothing for functions or globals that
haven't seen a definition yet. Make it return a forward declaration that will
get RAUWed with the definition if one is seen at a later point. The strategy
used to implement this is similar to what's done for types: the forward
declarations are stored in a vector and post processed upon finilization to
perform the required RAUWs.
For now the only user of getDeclarationOrDefinition() is EmitUsingDecl(), thus
this patch allows to emit correct imported declarations even in the absence of
an actual definition of the imported entity.
(Another user will be the debug info generation for argument default values
that I need to resurect).
Differential Revision: http://reviews.llvm.org/D6173
llvm-svn: 222220
Most of the debug info emission is powered essentially from function
definitions - if we emit the definition of a function, we emit the types
of its parameters, the members of those types, and so on and so forth.
For types that aren't referenced even indirectly due to this - because
they only appear in temporary expressions, not in any named variable, we
need to explicitly emit/add them as is done here. This is not the only
case of such code, and we might want to consider handling "void
func(void*); ... func(new T());" (currently debug info for T is not
emitted) at some point, though GCC doesn't. There's a much broader
solution to these issues, but it's a lot of work for possibly marginal
gain (but might help us improve the default -fno-standalone-debug
behavior to be even more aggressive in some places). See the original
review thread for more details.
Patch by jyoti allur (jyoti.yalamanchili@gmail.com)!
Differential Revision: http://reviews.llvm.org/D2498
llvm-svn: 218390
Due to the possible presence of return-by-out parameters, using the LLVM
argument number count when numbering debug info arguments can end up
off-by-one. This could produce two arguments with the same number, which
would in turn cause LLVM to emit only one of those arguments (whichever
it found last) or assert (r215157).
llvm-svn: 215227
Reverting r208106 to reapply r208065 with a fix for the regression. The
issue was that the enum tried to be built even if the declaration hadn't
been constructed for debug info - presenting problems for enum templates
and typedefs of enums with names for linkage purposes.
Original commit message:
This regressed a little further 208055 though it was already a little
broken.
While the requiresCompleteType optimization should be implemented here.
Future (possibly near future) work.
llvm-svn: 208114
This regressed a little further 208055 though it was already a little
broken.
While the requiresCompleteType optimization should be implemented here.
Future (possibly near future) work.
llvm-svn: 208065
CGDebugInfo and DIBuilder were lax in their handling of temporary
MDNodes. All temporary nodes need to be deleted, which means they need
to be RAUW'd with a permanent node. This was not happening.
To ensure this, leverage DIBuilder's new ability to create both
permanent and temporary declarations. Ensure all temporary declarations
are RAUW'd, even with itself. (DIDescriptor::RAUW handles the case where
it is replaced with itself and creates a new, duplicate permanent node
to replace itself with)
This means that all temporary declarations must be added to the
ReplacementMap even if they're never upgraded to definitions - so move
the point of insertion into the map to the point of creation of the
declarations.
llvm-svn: 208055
This takes a different approach than the
completedType/requiresCompleteType work which relies on AST callbacks to
upgrade the type declaration to a definition. Instead, just defer
constructing the definition to the end of the translation unit.
This works because the definition is never needed by other debug info
(so far as I know), whereas the definition of a struct may be needed by
other debug info before the end of the translation unit (such as
emitting the definition of a member function which must refer to that
member function's declaration).
If we had a callback for whenever an IVar was added to an ObjC interface
we could use that, and remove the need for the ObjCInterfaceCache, which
might be nice. (also would need a callback for when it was more than
just a declaration so we could get properties, etc).
A side benefit is that we also don't need the CompletedTypeCache
anymore. Just rely on the declaration-ness of a type to decide whether
its definition is yet to be emitted.
There's still the PR19562 memory leak, but this should hopefully make
that a bit easier to approach.
llvm-svn: 208015
are not associated with any source lines.
Previously, if the Location of a Decl was empty, EmitFunctionStart would
just keep using CurLoc, which would sometimes be correct (e.g., thunks)
but in other cases would just point to a hilariously random location.
This patch fixes this by completely eliminating all uses of CurLoc from
EmitFunctionStart and rather have clients explicitly pass in a
SourceLocation for the function header and the function body.
rdar://problem/14985269
llvm-svn: 205999
sure that a debugger can find them when stepping through code,
for example from the included testcase:
12 int test_it() {
13 c = 1;
14 d = 2;
-> 15 a = 4;
16 return (c == 1);
17 }
18
(lldb) p a
(int) $0 = 2
(lldb) p c
(int) $1 = 2
(lldb) p d
(int) $2 = 2
and a, c, d are all part of the file static anonymous union:
static union {
int c;
int d;
union {
int a;
};
struct {
int b;
};
};
Fixes PR19221.
llvm-svn: 205952
We already got the type alias correct (though I've included a test case
here) since Clang represents that like any other typedef - but type
alias templates weren't being handled.
llvm-svn: 205691
We should only have this optimization fire when the explicit
instantiation definition would cause at least one member function to be
emitted, thus ensuring that even a compiler not performing this
optimization would still emit the full type information elsewhere.
But we should also pessimize output still by always emitting the
definition when the explicit instantiation definition appears so that at
some point in the future we can depend on that information even when no
code had to be emitted in that TU. (this shouldn't happen very often,
since people mostly use explicit spec decl/defs to reduce code size -
but perhaps one day they could use it to explicitly reduce debug info
size too)
This was worth about 2% for Clang and LLVM - so not a huge win, but a
win. It looks really great for simple STL programs (include <string> and
just declare a string - 14k -> 1.4k of .dwo)
llvm-svn: 202769
class and use it pervasively to restore debug locations.
Fixes an interaction between cleanup and EH that caused the location
to not be restored properly after emitting a landing pad.
rdar://problem/15208190
llvm-svn: 199444
C and C++ don't emit an extra lexical scope for the compound statement
that is the body of an Objective-C method.
rdar://problem/15010825
llvm-svn: 198699
GCC ToT doesn't do this & it's worth about 3.2% on Clang's DWO file size
with Clang. Some or all of this may be due to things like r190715 which
could have source fixes/improvements, but it's not clear that's the case
and that doesn't help other source bases.
llvm-svn: 190716
Debug info emission was tripping over an IRGen bug (fixed in r189996)
that was resulting in duplicate emission of static data members of class
templates in namespaces.
We could add more test coverage to debug info for this issue
specifically, but I think the underlying IRGen test is more targeted and
sufficient for the issue.
llvm-svn: 190001
Both functions will take a Type pointer instead of a Decl pointer. This helps
with follow-up type uniquing patches, which need the Type pointer to call
CXX mangler to generate unique identifiers.
No functionality change.
llvm-svn: 189519
