This reverts commit 4a5ad2c077166cc3d6e7ab4cc6e3dcbbe922af86.
Windows doesn't support select() for pipe objects, and this also fails
to compile on Windows. Reverting this until we can get it sorted out
to keep the windows build working.
llvm-svn: 223392
The details are: large packets (like large memory reads (m packets) or large binary memory reads (x packet)) can get responses that come in across multiple read() calls. The while loop that was added meant that if only a partial packet came in (like only "$abc" coming for a response) GDBRemoteCommunication::CheckForPacket() was called, it would deadlock in the while loop because no more data is going to come in as this function needs to be called again with more data from another read. So the original fix will need to be corrected and resubmitted.
<rdar://problem/18853744>
llvm-svn: 221181
With this change, both local-process llgs and remote-target llgs stdout/stderr
handling from inferior work correctly.
Several log lines have been added around PTY and stdout/stderr redirection
logic on the lldb client side.
Regarding remote llgs execution, see the following:
With these changes, remote llgs with $O now works properly:
$ lldb
(lldb) platform select remote-linux
(lldb) target create ~/some/inferior/exe
(lldb) gdb-remote {some-target}:{port}
(lldb) run
The sequence above will correctly redirect stdout/stderr over gdb-remote $O,
as is needed for remote debugging. That sequence assumes there is a lldb-gdbserver
exe running on the target with {some-host}:{port}.
You can replace the gdb-remote command with a '(lldb) platform connect
connect://{target-ip}:{target-port}'. If you do this and have a
lldb-platform running on the remote end, it will go ahead and launch
llgs for lldb for each target instance that is run/attached.
For local debugging with llgs, the following sequence also works, and
uses local PTYs instead to avoid $O and extra gdb-remote messages:
$ lldb
(lldb) settings set platform.plugin.linux.use-llgs true
(lldb) target create ~/some/inferior/exe
(lldb) run
The above will run the inferior using llgs on the local host, and
will use PTYs rather than $O redirection.
This change also removes the logging that happened after the fork but
before the exec when llgs is launching a new inferior process. Some
aspect of the file handling during that portion of code would not do
the right thing with log handling. We might want to go back later
and have that communicate over a pipe from the child to parent to pass
along any messages that previously were logged in that section of code.
llvm-svn: 219578
As part of getting ConnectionFileDescriptor working on Windows,
there is going to be alot of platform specific work to be done.
As a result, the implementation is moving into Host. This patch
performs the code move and fixes up call-sites appropriately.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5548
llvm-svn: 219143
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
The $A handler was unnecessarily waiting for the launched app to hit a stop
before returning. Removed this code.
Renamed the llgs inferior launching code to LaunchProcessForDebugging ()
to prevent it from possibly being mistaken as code that lldb-platform uses
to launch a debugserver process. We probably want to look at breaking out
llgs-specific and lldb-platform-specific code into separate derived classes,
with common code in a shared base class.
llvm-svn: 218075
There are several places where multiple threads are accessing the same variables simultaneously without any kind of protection. I propose using std::atomic<> to make it safer. I did a special build of lldb, using the google tool 'thread sanitizer' which identified many cases of multiple threads accessing the same memory. std::atomic is low overhead and does not use any locks for simple types such as int/bool.
See http://reviews.llvm.org/D5302 for more details.
Change by Shawn Best.
llvm-svn: 217818
Instead of forcing the remote arch type to MachO all the time, we
inspect the OS/vendor that the remote debug server reports and use it to
set the arch type to MachO, ELF or COFF accordingly.
See thread here for more context:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140915/012968.html
Change by Stephane Sezer.
Tested:
MacOSX 10.9.4 x86_64
Ubuntu 14.04 x86_64
llvm-svn: 217779
This is useful for checking inconsistencies between what the remote debug server thinks we are debugging and we think we are debugging. This follows the check for pointer byte size done just above.
Change by Stephane Sezer.
Tested:
Ubuntu 14.04 x86_64, llvm-3.5-built lldb
MacOSX 10.9.4, Xcode-Beta(2014-09-09)-built lldb.
llvm-svn: 217773
* Fixes the local stack variable return pointer usage in NativeThreadLinux::GetName().
* Changes NativeThreadProtocol::GetName() to return a std::string.
* Adds a unit test to verify thread names don't regress in the future. Currently only run on Linux since I know default thread names there.
llvm-svn: 217717
* Sends a SIGSTOP to the process.
* Fixes busted SIGSTOP handling. Now builds a list of non-stopped
that we wait for the PTRACE group-stop for. When the final must-stop
tid gets its group stop, we propagate the process state change.
Only the signal receiving the notification of the pending SIGSTOP
is marked with the SIGSTOP signal. All the rest, if they weren't
already stopped, are marked as stopped with signal 0.
* Fixes a few broken tests.
* Marks the Linux test I added earlier as expect-pass (no longer XFAIL).
Implements fix for http://llvm.org/bugs/show_bug.cgi?id=20908.
llvm-svn: 217647
This change implements this ticket:
http://llvm.org/bugs/show_bug.cgi?id=20899
Adds the qThreadStopInfo RSP command for llgs and includes a test that
verifies both debugserver and llgs respond with something reasonable
on a multithreaded app.
llvm-svn: 217549
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
This cleans up a couple of warnings [-Wcovered-switch-default] from the build by
removing the default case from a couple of switches which are fully covered.
This is generally better as it will help identify when a new item is added to
the enumeration but the use sites are not updated.
llvm-svn: 217376
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
This patch accepts environment variables of the form:
LLDB_DEBUGSERVER_EXTRA_ARG_n
where n starts with 1, and may continue nearly indefinitely (up through std::numeric_limits<uint32_t>::max()).
The code loops around, starting with 1, until it doesn't find one of the environment variables. For each one it does find defined, it appends the environment variable's contents to the end of the debugserver/llgs startup command line issued when the stub is started for local debugging.
I am using this to add arbitrary startup commands to the llgs command line for turning on additional logging. For example:
export LLDB_DEBUGSERVER_EXTRA_ARG_1="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_2="log enable -f /tmp/llgs_packets.log gdb-remote packets"
export LLDB_DEBUGSERVER_EXTRA_ARG_3="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_4="log enable -f /tmp/llgs_process.log lldb process"
llvm-svn: 216745
This change:
* properly captures execs in NativeProcessLinux.
* clears out all non-main-thread thread metadata in NativeProcessLinux on exec.
* adds a DidExec() method to the NativeProcessProtocol delegate.
* clears out the auxv data cache when we exec (on Linux).
This is a small part of the llgs for local Linux debugging work going on here:
https://github.com/tfiala/lldb/tree/dev-llgs-local
I'm breaking it into small patches.
llvm-svn: 216670
This change addresses this bug:
http://llvm.org/bugs/show_bug.cgi?id=20755
This change:
* Modifies llgs to send triple instead of cputype and cpusubtype when not on Apple platforms in qProcessInfo.
* Modifies lldb's GDBRemoteCommunicationClient to handle the triple returned from qProcessInfo if given.
When given, it will prefer to use triple over cputype and cpusubtype.
* Adds gdb-remote protocol tests to verify that cputype and cpusubtype are specified on darwin, and that triple is specified on Linux.
llvm-svn: 216470
This continues the effort to get Host code moved over to HostInfo,
and removes many more instances of preprocessor defines along the
way.
llvm-svn: 216195
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
This patch moves the logic of many common socket operations into
its own class lldb_private::Socket. It then modifies the
ConnectionFileDescriptor class, and a few users of that class,
to use this new Socket class instead of hardcoding socket logic
directly.
Finally, this patch creates a common interface called IOObject for
any objects that support reading and writing, so that endpoints
such as sockets and files can be treated the same.
Differential Revision: http://reviews.llvm.org/D4641
Reviewed by: Todd Fiala, Greg Clayton
llvm-svn: 214984
call Target::SetArchitecture instead of modifying a
reference to the target's architecture so that the
target logging can show that the arch has been changed.
llvm-svn: 214667
GDBRemoteRegisterContext::ReadRegisterBytes and
GDBRemoteRegisterContext::WriteRegisterBytes to ensure we don't try
to read/write off the end of the register buffer. This should never
happen but we've had some target confusion in the past where it
did; adding the checks is prudent to avoid crashing here if it happens
again.
<rdar://problem/16450971>
<rdar://problem/16458182>
llvm-svn: 213829
to the remote side (QStartNoAckMode) - it may take a little longer
than normal to get a reply.
In debugserver, hardcode the priority for several threads so they
aren't de-prioritized when a user app is using system resources.
Also, set the names of the threads.
<rdar://problem/17509866>
llvm-svn: 213828
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
This change enables lldb-platform for Linux. In addition, it does the following:
* fixes Host::GetLLDBPath() to work on Linux/*BSD for ePathTypeSupportExecutableDir-relative paths.
* adds more logging and comments around lldb-platform startup and remote lldb-platform usage.
* refactors lldb-platform remote-* support for Darwin and Linux into PlatformPOSIX. This, in theory, is the bulk of what is needed for *BSD to make remote connections to lldb-platform as well (although I haven't tested that yet). FreeBSD can make similar changes to their Platform* as was made here for PlatformLinux to pick up the rest of the bits.
* teaches GDBRemoteCommunication to use lldb-gdbserver for non-Apple hosts.
llvm-svn: 213707
Now that llgs supports communicating the 0-port choose-a-port
mechanism and can communicate that back to a caller via the
--named-pipe option (at parity with debugserver), we use this
mechanism to always start llgs and debugserver gdb-remote
protocol tests without needing to use some port arbitration
mechanism. This eliminates some potential intermittent failures vs. the
previous random port and collision-avoidance strategy used.
llvm-svn: 212923
