This test relies on being able to unwind from an arbitrary place inside
libc. While I am not sure this is the cause of the observed flakyness,
it is known that we are not able to unwind correctly from some places in
(linux) libc.
This patch adds additional synchronization to ensure that the inferior
is in the main function (instead of pthread guts) when lldb tries to
unwind it. At the very least, it should make the test runs more
predictable/repeatable.
Always send PID in the detach packet when multiprocess extensions are
enabled. This is required by qemu's GDB server, as plain 'D' packet
results in an error and the emulated system is not resumed.
Differential Revision: https://reviews.llvm.org/D110033
A MachO userspace corefile may contain LC_THREAD commands which specify
thread exception state.
For arm64* only (for now), report a human-readable version of this state
as the thread stop reason, instead of 'SIGSTOP'.
As a follow-up, similar functionality can be implemented for x86 cores
by translating the trapno/err exception registers.
rdar://82898146
Differential Revision: https://reviews.llvm.org/D109795
This reverts commit 47dd1f642846d476e3d789f4aa941699dc0ed3fe.
After discussing with Jim Ingham, we agreed to leave the test as-is
so we can catch any CI problems instead of silently skipping the test.
A MachO userspace corefile may contain LC_THREAD commands which specify
thread exception state.
For arm64* only (for now), report a human-readable version of this state
as the thread stop reason, instead of 'SIGSTOP'.
As a follow-up, similar functionality can be implemented for x86 cores
by translating the trapno/err exception registers.
rdar://82898146
Differential Revision: https://reviews.llvm.org/D109795
xcodebuild, which is invoked by the apple_simulator_test decorator, may
may return a successful status even if it was unable to run due to the
authorization agent denying it. This causes the TestAppleSimulatorOSType
to run when it shouldn't, and throw an excpection when parsing the JSON
that lists the simulators available. Wrap the json parsing in a
try/except block and if it fails, skip the ttest.
Differential Revision: https://reviews.llvm.org/D109336
Alias the "sp" register to "x31" on AArch64 if one is present and does
not have the alt_name. This is the case when connecting to gdbserver.
Differential Revision: https://reviews.llvm.org/D109695
Recognize lr/sp/fp by their numeric register names in the ABI plugin.
This is necessary to mark them appropriately when interfacing with
gdbserver.
Differential Revision: https://reviews.llvm.org/D109691
Try determining the process architecture from <architecture/> tag
unconditionally, rather than for very specific cases. Generic gdbserver
implementations do not support LLDB-specific packets used to determine
the process architecture, therefore this fallback is necessary to
support architecture-specific behavior on these targets. Rather than
maintaining a mapping of all known architectures, just try mapping
the GDB values into triplets, as that is going to work most of the time.
This change is confirmed to fix LLDB against gdbserver when debugging
i386 and aarch64 executables.
Differential Revision: https://reviews.llvm.org/D109272
The thread that Visual Studio Code displays on a stop is called the focus thread. When the previous focus thread exits and we stop in a new thread, lldb-vscode does not tell vscode to set the new thread as the focus thread, so it selects the first thread in the thread list.
This patch changes lldb-vscode to tell vscode that the new thread is the focus thread. It also includes a test that verifies the DAP stop message for this case contains the correct values.
Reviewed By: clayborg, wallace
Differential Revision: https://reviews.llvm.org/D109633
Update GetRegisterInfoByName() methods to support getting registers
by a generic name independently of alt_name entries in the register
context. This makes it possible to use generic names when interacting
with gdbserver (that does not supply alt_names). It also makes it
possible to remove some of the duplicated information from register
context declarations and/or use alt_names for another purpose.
Differential Revision: https://reviews.llvm.org/D108554
TestDyldLaunchLinux.py has been recently added and is failing on LLDB
Arm/Linux buildbot. I am marking it skip till I come back and look at
it in more detail.
GDB uses normalized errno values for vFile errors. Implement
the translation between them and system errno values in the gdb-remote
plugin.
Differential Revision: https://reviews.llvm.org/D108148
Fall back to QEnvironmentHexEncoded if QEnvironment is not supported.
The latter packet is an LLDB extension, while the former is universally
supported.
Add tests for both QEnvironment and QEnvironmentHexEncoded packets,
including both use due to characters that need escaping and fallback
when QEnvironment is not supported.
Differential Revision: https://reviews.llvm.org/D108018
Implement the simpler vRun packet and prefer it over the A packet.
Unlike the latter, it tranmits command-line arguments without redundant
indices and lengths. This also improves GDB compatibility since modern
versions of gdbserver do not implement the A packet at all.
Make qLaunchSuccess not obligatory when using vRun. It is not
implemented by gdbserver, and since vRun returns the stop reason,
we can assume it to be successful.
Differential Revision: https://reviews.llvm.org/D107931
Add a GDB-compatible fallback to vFile:fstat for vFile:mode, and to
vFile:open for vFile:exists. Note that this is only partial fallback,
as it fails if the file cannot be opened.
Differential Revision: https://reviews.llvm.org/D107811
Add two new commands 'platform get-file-permissions' and 'platform
file-exists' for the respective bits of LLDB protocol. Add tests for
them. Fix error handling in GetFilePermissions().
Differential Revision: https://reviews.llvm.org/D107809
Create a common GDBPlatformClientTestBase class and move the platform
select/connect logic there to reduce duplication.
Differential Revision: https://reviews.llvm.org/D109585
Implement a fallback to getting the file size via vFile:stat packet
when the remote server does not implement vFile:size. This makes it
possible to query file sizes from remote gdbserver.
Note that unlike vFile:size, the fallback will not work if the server is
unable to open the file.
While at it, add a few tests for the 'platform get-size' command.
Differential Revision: https://reviews.llvm.org/D107780
This feature doesn't seem to have any dedicated test. Instead some random tests
(e.g. the bitfield tests) are declaring function-local classes for some reason.
This adds a dedicated test so we can clean up those other tests.
Also add FIXME's for some basic stuff that doesn't work. The first FIXME is a
good beginner bug which just requires prepending the function name (in case we
decide to fix it instead of documenting this behaviour). The second FIXME is
caused by LLDB searching for definitions by name (which also seems to miss the
function name so there is a conflict with the outer type).
Some more things that should be tested (and might not work):
* Local classes with member functions with local classes.
* Classes in different functions with same name.
* Classes with the same name in different TUs with internal linkage functions of
the same name.
* Empty classes are parsed by the DWARF parser in a fast path, so that requires
dedicated tests.
* Repeat some of the tested logic for C.
This patch fixes register save/restore on expression call to also include SVE registers.
This will fix expression calls like:
re re p1
<Register Value P1 before expression>
p <var-name or function call>
re re p1
<Register Value P1 after expression>
In above example register P1 should remain the same before and after the expression evaluation.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D108739
Remove File::eOpenOptionAppend from the mode used by 'platform file
open' command. According to POSIX, O_APPEND causes all successive
writes to be done at the end of the file. This effectively makes
the offset argument to 'platform file write' meaningless.
Furthermore, apparently O_APPEND is not implemented reliably everywhere.
The Linux manpage for pwrite(2) suggests that Linux does respect
O_APPEND there while according to POSIX it should not, so the actual
behavior would be dependent on how the vFile:pwrite packet is
implemented on the server.
Ideally, the mode used for opening flags would be provided via options.
However, changing the default mode seems to be a reasonable intermediate
solution.
Differential Revision: https://reviews.llvm.org/D107664
Fix 'platform file read' and 'platform file write' commands to correctly
detect erraneous return and report it as such. Currently, errors were
implicitly printed as a return value of -1, and the commands were
assumed to be successful.
Differential Revision: https://reviews.llvm.org/D107665
Extend PluginManager::SaveCore() to support saving core dumps
via Process plugins. Implement the client-side part of qSaveCore
request in the gdb-remote plugin, that creates the core dump
on the remote host and then uses vFile packets to transfer it.
Differential Revision: https://reviews.llvm.org/D101329
Add a new SaveCore() process method that can be used to request a core
dump. This is currently implemented on NetBSD via the PT_DUMPCORE
ptrace(2) request, and enabled via 'savecore' extension.
Protocol-wise, a new qSaveCore packet is introduced. It accepts zero
or more semicolon-separated key:value options, invokes the core dump
and returns a key:value response. Currently the only option supported
is "path-hint", and the return value contains the "path" actually used.
The support for the feature is exposed via qSaveCore qSupported feature.
Differential Revision: https://reviews.llvm.org/D101285
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
This relands commit aafa05e, reverted in 1f986f6.
Failed tests were fixed.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
Right now running `expr` to start the multiline expression editor and then
pressing enter causes an empty history empty to be created for the multiline
editor. That doesn't seem very useful for users as pressing the 'up' key will
now also bring up these empty expressions.
I don't think there is ever a use case for recalling a completely empty
expression from the history, so instead don't save those entries to the history
file and make sure we never recall them when navigating over the expression
history.
Note: This is actually a Swift downstream patch that got shipped with Apple's
LLDB for many years. However, this recently started conflicting with upstream
LLDB as D100048 added a test that made sure that empty expression entries don't
crash LLDB. Apple's LLDB was never affected by this crash as it never saved
empty expressions in the first place.
Reviewed By: augusto2112
Differential Revision: https://reviews.llvm.org/D108983
Remove software breakpoints from forked processes in order to restore
the original program code before detaching it.
Differential Revision: https://reviews.llvm.org/D100263
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
When I run a lldb command that uses filename completion, if I enter a string
that is not only a filename but also a string with a non-file name string added,
such as "./" that is relative path string , it will crash as soon as I press the
[Tab] key. For example, debugging an executable file named "hello" that is
compiled from a file named "hello.c" , and I’ll put a breakpoint on line 3 of
hello.c.
```
$ lldb ./hello
(lldb) breakpoint set --file hello.c --line 3
```
This is not a problem, but if I set "--file ./hello." and then press [Tab] key
to complete file name, lldb crashes.
```
$ lldb ./hello
(lldb) breakpoint set --file ./hello.terminate called after throwing an instance of 'std::out_of_range'
what(): basic_string::substr: __pos (which is 8) > this->size() (which is 7)
```
The crash was caused because substr() (in lldb/source/Host/common/Editline.cpp)
cut out string which size is user's input string from the completion string.
I modified the code that erase the user's intput string from current line and
then add the completion string.
Differential Revision: https://reviews.llvm.org/D108817
Add a support for handling fork/vfork stops in LLGS client. At this
point, it only sends a detach packet for the newly forked child
(and implicitly resumes the parent).
Differential Revision: https://reviews.llvm.org/D100206
It is currently possible to register a frame recognizer, but it will be applied if and only if the frame's PC points to the very first instruction of the specified function, which limits usability of this feature.
The implementation already supports changing this behaviour by passing an additional flag, but it's not possible to set it via the command interface. Fix that.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D108510
added new command "process trace save -d <directory>".
-it saves a JSON file as <directory>/trace.json, with the main properties of the trace session.
-it saves binary Intel-pt trace as <directory>/thread_id.trace; each file saves each thread.
-it saves modules to the directory <directory>/modules .
-it only works for live process and it only support Intel-pt right now.
Example:
```
b main
run
process trace start
n
process trace save -d /tmp/mytrace
```
A file named trace.json and xxx.trace should be generated in /tmp/mytrace. To load the trace that was just saved:
```
trace load /tmp/mytrace
thread trace dump instructions
```
You should see the instructions of the trace got printed.
To run a test:
```
cd ~/llvm-sand/build/Release/fbcode-x86_64/toolchain
ninja lldb-dotest
./bin/lldb-dotest -p TestTraceSave
```
Reviewed By: wallace
Differential Revision: https://reviews.llvm.org/D107669
