And always print it.
This makes some LLVM diagnostics match up better with Clang's diagnostics.
Updated some AMDGPU uses of DiagnosticInfoResourceLimit and now we print
better diagnostics for those.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D110204
This requires a minor change to CodeGenPrepare to ensure that
shouldSinkOperands will be called for And.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D110106
When using instructions which have a MetadataAsValue argument
(e.g. some target-specific intrinsics) MD canonicalization strips
internal MDNodes with a single ConstantAsMetadata child. That
prevented IRTranslator from the proper translation of such a calls.
Add generic helper function that matches constant splat. It has option to
match constant splat with undef (some elements can be undef but not all).
Add util function and matcher for G_FCONSTANT splat.
Differential Revision: https://reviews.llvm.org/D104410
For artifacts excluding G_TRUNC/G_SEXT, which have IR counterparts, we don't
seem to have debug users of defs. However, in the legalizer we're always calling
MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval() which is expensive.
In some rare cases, this contributes significantly to unreasonably long compile
times when we have lots of artifact combiner activity.
To verify this, I added asserts to that function when it actually replaced a debug
use operand with undef for these artifacts. On CTMark with both -O0 and -Os and
debug info enabled, I didn't see a single case where it triggered.
In my measurements I saw around a 0.5% geomean compile-time improvement on -g -O0
for AArch64 with this change.
Differential Revision: https://reviews.llvm.org/D109750
Add eraseInstr(s) utility functions. Before deleting an instruction
collects its use instructions. After deletion deletes use instructions
that became trivially dead.
This patch clears all dead instructions in existing legalizer mir tests.
Differential Revision: https://reviews.llvm.org/D109154
Rework getConstantstVRegValWithLookThrough in order to make it clear if we
are matching integer/float constant only or any constant(default).
Add helper functions that get DefVReg and APInt/APFloat from constant instr
getIConstantVRegValWithLookThrough: integer constant, only G_CONSTANT
getFConstantVRegValWithLookThrough: float constant, only G_FCONSTANT
getAnyConstantVRegValWithLookThrough: either G_CONSTANT or G_FCONSTANT
Rename getConstantVRegVal and getConstantVRegSExtVal to getIConstantVRegVal
and getIConstantVRegSExtVal. These now only match G_CONSTANT as described
in comment.
Relevant matchers now return both DefVReg and APInt/APFloat.
Replace existing uses of getConstantstVRegValWithLookThrough and
getConstantVRegVal with new helper functions. Any constant match is
only required in:
ConstantFoldBinOp: for constant argument that was bit-cast of float to int
getAArch64VectorSplat: AArch64::G_DUP operands can be any constant
amdgpu select for G_BUILD_VECTOR_TRUNC: operands can be any constant
In other places use integer only constant match.
Differential Revision: https://reviews.llvm.org/D104409
getMetadata() currently uses a weird API where it populates a
structure passed to it, and optionally merges into it. Instead,
we can return the AAMDNodes and provide a separate merge() API.
This makes usages more compact.
Differential Revision: https://reviews.llvm.org/D109852
Introduce a new command-line flag `-swift-async-fp={auto|always|never}`
that controls how code generation sets the Swift extended async frame
info bit. There are three possibilities:
* `auto`: which determines how to set the bit based on deployment target, either
statically or dynamically via `swift_async_extendedFramePointerFlags`.
* `always`: the default, always set the bit statically, regardless of deployment
target.
* `never`: never set the bit, regardless of deployment target.
Patch by Doug Gregor <dgregor@apple.com>
Reviewed By: doug.gregor
Differential Revision: https://reviews.llvm.org/D109392
If a loop count was initially represented by a 32b unsigned int in C
then the hardware-loop pass can recognise the loop guard and insert
the llvm.test.set.loop.iterations intrinsic. If this was instead a
unsigned short/char then clang inserts a zext instruction to expand
the loop count to an i32. This patch adds the necessary pattern
matching to enable the use of lvm.test.set.loop.iterations in those
cases.
Patch by: sherwin-dc
Differential Revision: https://reviews.llvm.org/D109631
New field `elements` is added to '!DIImportedEntity', representing
list of aliased entities.
This is needed to dump optimized debugging information where all names
in a module are imported, but a few names are imported with overriding
aliases.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D109343
The doc comment for isPredecessor says:
Returns true if \p DefMI precedes \p UseMI or they are the same
instruction.
And dominates relies on that behavior for its own:
Returns true if \p DefMI dominates \p UseMI. By definition an
instruction dominates itself.
Make both statements correct by fixing isPredecessor.
Found by inspection.
The fmul is a canonicalizing operation, and fneg is not so this would
break denormals that need flushing and also would not quiet signaling
nans. Fold to fsub instead, which is also canonicalizing.
This simple heuristic uses the estimated live range length combined
with the number of registers in the class to switch which heuristic to
use. This was taking the raw number of registers in the class, even
though not all of them may be available. AMDGPU heavily relies on
dynamically reserved numbers of registers based on user attributes to
satisfy occupancy constraints, so the raw number is highly misleading.
There are still a few problems here. In the original testcase that
made me notice this, the live range size is incorrect after the
scheduler rearranges instructions, since the instructions don't have
the original InstrDist offsets. Additionally, I think it would be more
appropriate to use the number of disjointly allocatable registers in
the class. For the AMDGPU register tuples, there are a large number of
registers in each tuple class, but only a small fraction can actually
be allocated at the same time since they all overlap with each
other. It seems we do not have a query that corresponds to the number
of independently allocatable registers. Relatedly, I'm still debugging
some allocation failures where overlapping tuples seem to not be
handled correctly.
The test changes are mostly noise. There are a handful of x86 tests
that look like regressions with an additional spill, and a handful
that now avoid a spill. The worst looking regression is likely
test/Thumb2/mve-vld4.ll which introduces a few additional
spills. test/CodeGen/AMDGPU/soft-clause-exceeds-register-budget.ll
shows a massive improvement by completely eliminating a large number
of spills inside a loop.
Ignore dbg instructions when collecting stack slot markers. This is
to make sure the coloring is invariant regarding presence of dbg
instructions (even in cases when the dbg instructions might be
badly placed in the input).
Differential Revision: https://reviews.llvm.org/D109758
APInt is used to describe a bit mask in a variety of value tracking and demanded bits/elts functions.
When traversing through dst/src operands, we have a number of places where these masks need to widened/narrowed to translate through bitcasts, reductions etc. to a different type.
This patch add a APIntOps::ScaleBitMask common helper, adds unit test coverage, and updates a number of cases to use the the helper instead of their own implementation.
This came up on D109065 where we currently have to add yet another implementation of the same code.
Differential Revision: https://reviews.llvm.org/D109683
This extends the custom lowering for extending loads on
fixed length vectors in SVE to support masked extending loads.
The existing tests for correct behaviour of masked extending loads
exhibit bad code generation due to the legalistaion of i1 vectors.
They have been left as-is and new tests have been added that do not
exhibit this behaviour.
Differential Revision: https://reviews.llvm.org/D108200
Rather than inspecting the pointer element type, use the access
type of the load/store/atomicrmw/cmpxchg.
In the process of doing this, simplify the logic by storing the
address + type in MemoryUses, rather than an Instruction + Operand
pair (which was then used to fetch the address).
Always use the byval/inalloca/preallocated type (which is required
nowadays), don't fall back on the pointer element type.
This requires adding Function::getParamPreallocatedType() to
mirror the CallBase API, so that the templated code can work with
both.
This patch implements legalization of EXTRACT_SUBVECTOR for the case
where the result needs promoting, and the input type requires widening.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D109509
This patch implements legalization of EXTRACT_SUBVECTOR for the case
where the result needs promoting, and the input type is either legal
or requires splitting.
The idea is that the operation is broken down into simpler steps,
by first extracting a smaller subvector until the input vector
becomes legal or requires promotion.
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D109313
Soft deprecrate isNullValue/isAllOnesValue and update in tree
callers. This matches the changes to the APInt interface from
D109483.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D109535
Follow up to suggestions in D109103 via hans:
I think UnreachableDefault (or UnreachableFallthrough) would be a
better name now, since it doesn't just omit the range check, it also
omits the last bit test.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D109455
This renames the primary methods for creating a zero value to `getZero`
instead of `getNullValue` and renames predicates like `isAllOnesValue`
to simply `isAllOnes`. This achieves two things:
1) This starts standardizing predicates across the LLVM codebase,
following (in this case) ConstantInt. The word "Value" doesn't
convey anything of merit, and is missing in some of the other things.
2) Calling an integer "null" doesn't make any sense. The original sin
here is mine and I've regretted it for years. This moves us to calling
it "zero" instead, which is correct!
APInt is widely used and I don't think anyone is keen to take massive source
breakage on anything so core, at least not all in one go. As such, this
doesn't actually delete any entrypoints, it "soft deprecates" them with a
comment.
Included in this patch are changes to a bunch of the codebase, but there are
more. We should normalize SelectionDAG and other APIs as well, which would
make the API change more mechanical.
Differential Revision: https://reviews.llvm.org/D109483
This moves one mid-size function out of line, inlines the
trivial tcAnd/tcOr/tcXor/tcComplement methods into their only
caller, and moves the magic/umagic functions into SelectionDAG
since they are implementation details of its algorithm. This
also removes the unit tests for magic, but these are already
tested in the divide lowering logic for various targets.
This also upgrades some C style comments to C++.
Differential Revision: https://reviews.llvm.org/D109476
This is a port of a combine which matches a pattern where a wide type scalar
value is stored by several narrow stores. It folds it into a single store or
a BSWAP and a store if the targets supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
=>
*((i32)p) = val;
On CTMark AArch64 -Os this results in a good amount of savings:
Program before after diff
SPASS 412792 412788 -0.0%
kc 432528 432512 -0.0%
lencod 430112 430096 -0.0%
consumer-typeset 419156 419128 -0.0%
bullet 475840 475752 -0.0%
tramp3d-v4 367760 367628 -0.0%
clamscan 383388 383204 -0.0%
pairlocalalign 249764 249476 -0.1%
7zip-benchmark 570100 568860 -0.2%
sqlite3 287628 286920 -0.2%
Geomean difference -0.1%
Differential Revision: https://reviews.llvm.org/D109419
Otherwise we end up with an extra conditional jump, following by an
unconditional jump off the end of a function. ie.
bb.0:
BT32rr ..
JCC_1 %bb.4 ...
bb.1:
BT32rr ..
JCC_1 %bb.2 ...
JMP_1 %bb.3
bb.2:
...
bb.3.unreachable:
bb.4:
...
Should be equivalent to:
bb.0:
BT32rr ..
JCC_1 %bb.4 ...
JMP_1 %bb.2
bb.1:
bb.2:
...
bb.3.unreachable:
bb.4:
...
This can occur since at the higher level IR (Instruction) SwitchInsts
are required to have BBs for default destinations, even when it can be
deduced that such BBs are unreachable.
For most programs, this isn't an issue, just wasted instructions since the
unreachable has been statically proven.
The x86_64 Linux kernel when built with CONFIG_LTO_CLANG_THIN=y fails to
boot though once D106056 is re-applied. D106056 makes it more likely
that correlation-propagation (CVP) can deduce that the default case of
SwitchInsts are unreachable. The x86_64 kernel uses a binary post
processor called objtool, which emits this warning:
vmlinux.o: warning: objtool: cfg80211_edmg_chandef_valid()+0x169: can't
find jump dest instruction at .text.cfg80211_edmg_chandef_valid+0x17b
I haven't debugged precisely why this causes a failure at boot time, but
fixing this very obvious jump off the end of the function fixes the
warning and boot problem.
Link: https://bugs.llvm.org/show_bug.cgi?id=50080
Fixes: https://github.com/ClangBuiltLinux/linux/issues/679
Fixes: https://github.com/ClangBuiltLinux/linux/issues/1440
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D109103
When handling register spill for indirect debug value LiveDebugValues pass doesn't add
DW_OP_deref operator which may in some cases cause debugger to return value address, instead
of value while machine register holding that address is spilled.
Differential revision: https://reviews.llvm.org/D109142
This patch extends the preliminary support for vector-predicated (VP)
operation legalization to include promotion of illegal integer vector
types.
Integer promotion of binary VP operations is relatively simple and
piggy-backs on the non-VP logic, but passing the two extra mask and VP
operands through to the promoted operation.
Tests have been added to the RISC-V target to cover the basic scenarios
for integer promotion for both fixed- and scalable-vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D108288
In preparation for passing the MCSubtargetInfo (STI) through to writeNops
so that it can use the STI in operation at the time, we need to record the
STI in operation when a MCAlignFragment may write nops as padding. The
STI is currently unused, a further patch will pass it through to
writeNops.
There are many places that can create an MCAlignFragment, in most cases
we can find out the STI in operation at the time. In a few places this
isn't possible as we are in initialisation or finalisation, or are
emitting constant pools. When possible I've tried to find the most
appropriate existing fragment to obtain the STI from, when none is
available use the per module STI.
For constant pools we don't actually need to use EmitCodeAlign as the
constant pools are data anyway so falling through into it via an
executable NOP is no better than falling through into data padding.
This is a prerequisite for D45962 which uses the STI to emit the
appropriate NOP for the STI. Which can differ per fragment.
Note that involves an interface change to InitSections. It is now
called initSections and requires a SubtargetInfo as a parameter.
Differential Revision: https://reviews.llvm.org/D45961
