OpenMP runtime fails to build on SystemZ with clang with the following
error message:
LLVM ERROR: Unsupported stack frame traversal count
__kmpc_omp_task_begin_if0() uses OMPT_GET_FRAME_ADDRESS(1), which
delegates to __builtin_frame_address(), which in turn works with nonzero
values on SystemZ only if backchain is in use. If backchain is not in
use, the above error is emitted.
Compile __kmpc_omp_task_begin_if0() with backchain. Note that this only
resolves the build error. If at runtime its caller is compiled without
backchain, __builtin_frame_address() will produce an incorrect value,
but will not cause a crash. Since the value is relevant only for OMPT,
this is acceptable.
Line 75 of `z_Linux_util.cpp` checks `#ifdef KMP_OS_SOLARIS` which is
always true regardless of the building platform because macro
`KMP_OS_SOLARIS` is always defined in line 23 of `kmp_platform.h`:
`define KMP_OS_SOLARIS 0`.
This commit adds skewed distribution of iterations in
nonmonotonic:dynamic schedule (static steal) for hybrid systems when
thread affinity is assigned. Currently, it distributes the iterations at
60:40 ratio. Consider this loop with dynamic schedule type,
for (int i = 0; i < 100; ++i). In a hybrid system with 20 hardware
threads (16 CORE and 4 ATOM core), 88 iterations will be assigned to
performance cores and 12 iterations will be assigned to efficient cores.
Each thread with CORE core will process 5 iterations + extras and with
ATOM core will process 3 iterations.
Differential Revision: https://reviews.llvm.org/D152955
* openmp/README.rst
- Add s390x to those platforms supported
* openmp/libomptarget/plugins-nextgen/CMakeLists.txt
- Add s390x subdirectory
* openmp/libomptarget/plugins-nextgen/s390x/CMakeLists.txt
- Add s390x definitions
* openmp/runtime/CMakeLists.txt
- Add s390x to those platforms supported
* openmp/runtime/cmake/LibompGetArchitecture.cmake
- Define s390x ARCHITECTURE
* openmp/runtime/cmake/LibompMicroTests.cmake
- Add dependencies for System z (aka s390x)
* openmp/runtime/cmake/LibompUtils.cmake
- Add S390X to the mix
* openmp/runtime/cmake/config-ix.cmake
- Add s390x as a supported LIPOMP_ARCH
* openmp/runtime/src/kmp_affinity.h
- Define __NR_sched_[get|set]addinity for s390x
* openmp/runtime/src/kmp_config.h.cmake
- Define CACHE_LINE for s390x
* openmp/runtime/src/kmp_os.h
- Add KMP_ARCH_S390X to support checks
* openmp/runtime/src/kmp_platform.h
- Define KMP_ARCH_S390X
* openmp/runtime/src/kmp_runtime.cpp
- Generate code when KMP_ARCH_S390X is defined
* openmp/runtime/src/kmp_tasking.cpp
- Generate code when KMP_ARCH_S390X is defined
* openmp/runtime/src/thirdparty/ittnotify/ittnotify_config.h
- Define ITT_ARCH_S390X
* openmp/runtime/src/z_Linux_asm.S
- Instantiate __kmp_invoke_microtask for s390x
* openmp/runtime/src/z_Linux_util.cpp
- Generate code when KMP_ARCH_S390X is defined
* openmp/runtime/test/ompt/callback.h
- Define print_possible_return_addresses for s390x
* openmp/runtime/tools/lib/Platform.pm
- Return s390x as platform and host architecture
* openmp/runtime/tools/lib/Uname.pm
- Set hardware platform value for s390x
Looking at 855d09855d8e541176758f38015e8b9b522d6110 it looks like a bit was
missing. The padding variable is used further down by the KMP_ALLOCA()
function.
Summary:
The `llvm_omp_target_dynamic_shared_alloc` prototype in `omp.h`
accidentally left the void argument unspecified. This created unintended
code when called from the C language, causing some `nvlink` failures in
certain scenarios.
struct DEP defined in multiple testcases must correspond to runtime's
struct kmp_depend_info. The former defines flags as int, and the latter
as kmp_uint8_t. This discrepancy goes unnoticed on little-endian
systems, but breaks big-endian ones.
Make flags in struct DEP unsigned char.
structs kmp_depend_info.flags and kmp_tasking_flags contain bitfields,
which overlay integer flag values. The current bitfield definitions
target little-endian machines. On big-endian machines bitfields are laid
out in the opposite order, so the current definitions do not work there.
There are two ways to fix this: either provide big-endian bitfield
definitions, or bit-swap integer flag values. Go with the former, since
it's localized to one place and therefore is more maintainable.
Implement a slow-path version of omp_target_memset*()
There is a TODO to implement a fast path that uses an on-device
kernel instead of the host-based memory fill operation. This may
require some additional plumbing to have kernels in libomptarget.so
VE supports up to 64 threads per a VE process. So, we limit the number
of threads defined by KMP_MAX_NTH. We also modify the __kmp_sys_max_nth
initialization to use KMP_MAX_NTH as a limit.
The /tmp fallback for /dev/shm did not write to a fixed filename, so multiple instances of the runtime would not be able to detect each other. Now, we create the /tmp file in much the same way as the /dev/shm file was created, since mkstemp approach would not work to create a file that other instances of the runtime would detect. Also, add the environment variable method as a third fallback to /dev/shm and /tmp for library registration, as some systems do not have either. Also, add ability to fallback to a subsequent method should a failure occur during any part of the registration process. When unregistering, it is assumed that the method chosen during registration should work, so errors at that point are ignored. This also avoids a problem with multiple threads trying to unregister the library.
This commit removes an optimization that skips the initialization of the
reduction struct if the number of threads in a team is 1. This
optimization
caused a bug with Hidden Helper Threads. When the task group is
initially
initialized by the master thread but a Hidden Helper Thread executes a
target
nowait region, it requires the reduction struct initialization to
properly
accumulate the data.
This commit also adds a LIT test for issue #57522 to ensure that the
issue is
properly addressed and that the optimization removal does not introduce
any
regressions.
Fixes: #57522
Change to use VE_LD_LIBRARY_PATH for VE instead of LD_LIBRARY_PATH. The
VE is connected to the host, and compiled test programs for VE is
invoked on the host and transferred to the VE. If programs are compiled
for the host, we use LD_LIBRARY_PATH. Otherwise, we use
VE_LD_LIBRARY_PATH.
Support OpenMP runtime library on VE. This patch makes OpenMP compilable
for VE architecture. Almost all tests run correctly on VE.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D159401
Based on https://en.cppreference.com/w/c/memory/aligned_alloc, the
`size` is supposed
to be a multiple of `alignment`, and it is implementation defined
behavior if not.
We have a non-conformant use in `kmp_barrier.h` when allocating
distribute barrier.
The size of the barrier is 576 and the alignment is `4*CACHE_LINE`,
which is 256
on most systems. Apparently it works perfectly fine for Linux and
Intel-based Mac,
but not for Apple Silicon based Mac.
Fix#63194.
The function assumes that `__kmp_gtid_get_specific` always returns a valid gtid.
That is not always true, because when creating the key for thread-specific data,
a destructor is assigned. The dtor will be called at thread exit. However, before
the dtor is called, the thread-specific data will be reset to NULL first
(https://pubs.opengroup.org/onlinepubs/009695399/functions/pthread_key_create.html):
> At thread exit, if a key value has a non-NULL destructor pointer, and the thread
> has a non-NULL value associated with that key, the value of the key is set to NULL.
This will lead to that `__kmp_gtid_get_specific` returns `KMP_GTID_DNE`.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D159369
The outlined function is typically invoked by using
`__kmp_invoke_microtask`,
which is written in asm. D138495 introduces a new interface function for
parallel
region for OpenMPIRBuilder, where the outlined function is called via
the function
pointer. For some reason, it works perfectly well on x86 and x86-64
system, but
doesn't work on Apple Silicon. The 3rd argument in the callee is always
`nullptr`, even
if it is not in caller. It appears `x2` always contains `0x0`. This
patch adopts
the typical method to invoke the function pointer. It works on my M2
Ultra Mac.
Fix#63194.
Previously, the test ran a section with
#pragma omp target thread_limit(4)
and expected it to execute exactly 4 times, even though it would
in practice execute min(cores, 4) times.
Increment a counter and check that it executed 1-4 times.
Differential Revision: https://reviews.llvm.org/D159311
In `__kmp_get_global_thread_id`, if the gtid mode is 1, after getting the gtid
from TLS, it will store the gtid value to the thread stack maintained in the thread
descriptor. However, `__kmp_get_global_thread_id` can be called when the library
is destructed, after the corresponding thread info has been release. This will
cause a segment fault. This can happen on an Intel-based Mac.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D159324
Since td_allow_completion_event is a member of the taskdata struct, not all
firstprivate/shared variables are stored at the end of the task memory
allocation. Simply report the whole allocation instead.
Furthermore, the function should always return 0 since in no case there is
another block to report.
Differential Review: https://reviews.llvm.org/D158080
offloading
- This patch adds support for thread_limit clause on target directive according to OpenMP 51 [2.14.5]
- The idea is to create an outer task for target region, when there is a thread_limit clause, and manipulate the thread_limit of task instead. This way, thread_limit will be applied to all the relevant constructs enclosed by the target region.
Differential Revision: https://reviews.llvm.org/D152054
A few places in the loop collapse support code make small dynamic allocations
that introduce a noticeable performance overhead when made on the heap.
This change moves allocations up to 32 bytes to the stack instead of the heap.
Differential Revision: https://reviews.llvm.org/D158220
This change has the primary thread create each thread's initial mask
and topology information so it is available immediately after
forking. The setting of mask/topology information is decoupled from the
actual binding. Also add this setting of topology information inside the
__kmp_partition_places mechanism for OMP_PLACES+OMP_PROC_BIND.
Without this, there could be a timing window after the primary
thread signals the workers to fork where worker threads have not yet
established their affinity mask or topology information.
Each worker thread will then bind to the location the primary thread
sets.
Differential Revision: https://reviews.llvm.org/D156727
This change adds the option of using different units for blocktimes specified via the KMP_BLOCKTIME environment variable. The parsing of the environment now recognizes units suffixes: ms and us. If a units suffix is not specified, the default unit is ms. Thus default behavior is still the same, and any previous usage still works the same. Internally, blocktime is now converted to microseconds everywhere, so settings that exceed INT_MAX in microseconds are considered "infinite".
kmp_set/get_blocktime are updated to use the units the user specified with KMP_BLOCKTIME, and if not specified, ms are used.
Added better range checking and inform messages for the two time units. Large values of blocktime for default (ms) case (beyond INT_MAX/1000) are no longer allowed, but will autocorrect with an INFORM message.
The delay for determining ticks per usec was lowered. It is now 1 million ticks which was calculated as ~450us based on 2.2GHz clock which is pretty typical base clock frequency on X86:
(1e6 Ticks) / (2.2e9 Ticks/sec) * (1e6 usec/sec) = 454 usec
Really short benchmarks can be affected by longer delay.
Update KMP_BLOCKTIME docs.
Portions of this commit were authored by Johnny Peyton.
Differential Revision: https://reviews.llvm.org/D157646
There is no `threadDim` in CUDA. Instead, it is `blockDim`. Then the current
`blockDim` is `gridDim` in CUDA.
Reviewed By: jhuber6
Differential Revision: https://reviews.llvm.org/D157051
The new ompx.h header will give us a place to put extensions. The first
are 3D getters for the common cuda values:
`{threadId,threadDim,blockId,blockDim}.{x,y,z}`
Differential Revision: https://reviews.llvm.org/D156501
* Add KMP_CPU_EQUAL and KMP_CPU_ISEMPTY to affinity mask API
* Add printout of leader to hardware thread dump
* Allow OMP_PLACES to restrict fullMask
This change fixes an issue with the OMP_PLACES=resource(#) syntax.
Before this change, specifying the number of resources did NOT change
the default number of threads created by the runtime. e.g.,
OMP_PLACES=cores(2) would still create __kmp_avail_proc number of
threads. After this change, the fullMask and __kmp_avail_proc are
modified if necessary so that the final place list dictates which
resources are available and how thus, how many threads are created by
default.
* Introduce hybrid core attributes to OMP_PLACES and KMP_AFFINITY
For OMP_PLACES, two new features are added:
1) OMP_PLACES=cores:<attribute> where <attribute> is either
intel_atom, intel_core, or eff# where # is 0 - number of core
efficiencies-1. This syntax also supports the optional (#)
number selection of resources.
2) OMP_PLACES=core_types|core_effs where this setting will create
the number of core_types (or core_effs|core_efficiencies).
For KMP_AFFINITY, the granularity setting is expanded to include two new
keywords: core_type, and core_eff (or core_efficiency). This will set
the granularity to include all cores with a particular core type (or
efficiency). e.g., KMP_AFFINITY=granularity=core_type,compact will
create threads which can float across a single core type.
Differential Revision: https://reviews.llvm.org/D154547
Implemented RAII objects, initialized at target entry points, that
invoke tool-supplied callbacks. Updated status of target callbacks as
implemented.
Depends on D127365
Patch from John Mellor-Crummey <johnmc@rice.edu>
With contributions from:
Dhruva Chakrabarti <Dhruva.Chakrabarti@amd.com>
Jan-Patrick Lehr <janpatrick.lehr@amd.com>
Reviewed By: jdoerfert, dhruvachak, jplehr
Differential Revision: https://reviews.llvm.org/D127367
Implemented RAII objects, initialized at target entry points, that
invoke tool-supplied callbacks. Updated status of target callbacks as
implemented.
Depends on D127365
Patch from John Mellor-Crummey <johnmc@rice.edu>
With contributions from:
Dhruva Chakrabarti <Dhruva.Chakrabarti@amd.com>
Jan-Patrick Lehr <janpatrick.lehr@amd.com>
Reviewed By: jdoerfert, dhruvachak
Differential Revision: https://reviews.llvm.org/D127367
Get the KMP_VERSION printout logic out of environment variable file
(kmp_settings.cpp) and move to end of serial initialization where
KMP_SETTINGS and OMP_DISPLAY_ENV are.
Differential Revision: https://reviews.llvm.org/D154652
Get rid of explicit mask alloc, getthreadaffinity, set temp affinity,
reset to old affinity, dealloc steps in favor of existing
kmp_affinity_raii_t to push/pop a temporary affinity.
Differential Revision: https://reviews.llvm.org/D154650
This patch adds support for invoking target callbacks but does not yet
invoke them. A new structure OmptInterface has been added that tracks
thread local states including correlation ids. This structure defines
methods that will be called from the device independent target library
with information related to a target entry point for which a callback
is invoked. These methods in turn use the callback functions maintained
by OmptDeviceCallbacksTy to invoke the tool supplied callbacks.
Depends on D124652
Patch from John Mellor-Crummey <johnmc@rice.edu>
With contributions from:
Dhruva Chakrabarti <Dhruva.Chakrabarti@amd.com>
Differential Revision: https://reviews.llvm.org/D127365
Add CHECK_OPENMP_ENV environment variable which will be passed to environment
variables for test (make check-* target). This provides a handy way to
exercise various openmp code with different settings during development.
For example, to change default barrier pattern:
```
$ env CHECK_OPENMP_ENV="KMP_FORKJOIN_BARRIER_PATTERN=hier,hier \
KMP_PLAIN_BARRIER_PATTERN=hier,hier \
KMP_REDUCTION_BARRIER_PATTERN=hier,hier" \
ninja check-openmp
```
Even with this, each test can set appropriate environment variables if needed
as before.
Also, this commit adds missing documention about how to run tests in README.
Patch provided by t-msn
Differential Revision: https://reviews.llvm.org/D122645
Added support in the generic plugin to invoke registered callbacks.
Depends on D124070
Patch from John Mellor-Crummey <johnmc@rice.edu>
(With contributions from Dhruva Chakrabarti <Dhruva.Chakrabarti@amd.com>)
Differential Revision: https://reviews.llvm.org/D124652
By building the assembly with language ASM now (since
4072c8aee4c89c4457f4f30d01dc9bb4dfa52559 and
cbaa3597aaf6273e66b3f445ed36a6458143fe6a), this shouldn't be
needed any longer.
Differential Revision: https://reviews.llvm.org/D150701
