Add patterns for i8/i16 local atomic load/store.
Added tests for new patterns.
Copied atomic_[store/load]_local.ll to GlobalISel directory.
Differential Revision: https://reviews.llvm.org/D111869
This has a couple of benefits:
1. It can sometimes fix clusters that got broken apart when the register
allocator inserted a copy.
2. Post-RA scheduling does not have to worry about increasing register
pressure, which in some cases gives it more freedom to reorder
instructions.
Testing on a collection of 10,000 graphics shaders compiled for gfx1010
showed:
- The average length of each run of one or more load instructions
increased by about 1%.
- The number of runs of two or more load instructions increased by
about 4%.
Differential Revision: https://reviews.llvm.org/D111646
This has a couple of benefits:
1. It can sometimes fix clusters that got broken apart when the register
allocator inserted a copy.
2. Post-RA scheduling does not have to worry about increasing register
pressure, which in some cases gives it more freedom to reorder
instructions.
Testing on a collection of 10,000 graphics shaders compiled for gfx1010
showed:
- The average length of each run of one or more load instructions
increased by about 1%.
- The number of runs of two or more load instructions increased by
about 4%.
In order to not generate an unnecessary G_CTLZ, I extended the constant folder
in the CSEMIRBuilder to handle G_CTLZ. I also added some extra handing of
vector constants too. It seems we don't have any support for doing constant
folding of vector constants, so the tests show some other useless G_SUB
instructions too.
Differential Revision: https://reviews.llvm.org/D111036
Scalarize before narrowing because the narrowing implementation does not
work on vectors. This matches what we do for regular G_MUL.
Differential Revision: https://reviews.llvm.org/D111129
The delayed stack protector feature which is currently used for SDAG (and thus
allows for more commonly generating tail calls) depends on being able to extract
the tail call into a separate return block. To do this it also has to extract
the vreg->physreg copies that set up the call's arguments, since if it doesn't
then the call inst ends up using undefined physregs in it's new spliced block.
SelectionDAG implementations can do this because they delay emitting register
copies until *after* the stack arguments are set up. GISel however just
processes and emits the arguments in IR order, so stack arguments always end up
last, and thus this breaks the code that looks for any register arg copies that
precede the call instruction.
This patch adds a thunk argument to the assignValueToReg() and custom assignment
hooks. For outgoing arguments, register assignments use this return param to
return a thunk that does the actual generating of the copies. We collect these
until all the outgoing stack assignments have been done and then execute them,
so that the copies (and perhaps some artifacts like G_SEXTs) are placed after
any stores.
Differential Revision: https://reviews.llvm.org/D110610
Also remove some redundancy because the source and result
types of any multiply are always the same.
Differential Revision: https://reviews.llvm.org/D110926
We don't allow an initializer for LDS variables
and there is an early abort during instruction
selection. This patch legalizes them by ignoring
the init values. During assembly emission, proper
error reporting already exists for such instances.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D109901
When using instructions which have a MetadataAsValue argument
(e.g. some target-specific intrinsics) MD canonicalization strips
internal MDNodes with a single ConstantAsMetadata child. That
prevented IRTranslator from the proper translation of such a calls.
v_fmac with source modifiers forces VOP3 encoding, but it is strictly
better to use the VOP3-only v_fma instead, because $dst and $src2 are
not tied so it gives the register allocator more freedom and avoids a
copy in some cases.
This is the same strategy we already use for v_mad vs v_mac and
v_fma_legacy vs v_fmac_legacy.
Differential Revision: https://reviews.llvm.org/D110070
This is motivated by an pathological compile time issue during unmerge combining.
We should be able to use the AVF to do simplification. However AMDGPU
has a lot of codegen changes which I'm not sure how to evaluate.
Differential Revision: https://reviews.llvm.org/D109748
For artifacts excluding G_TRUNC/G_SEXT, which have IR counterparts, we don't
seem to have debug users of defs. However, in the legalizer we're always calling
MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval() which is expensive.
In some rare cases, this contributes significantly to unreasonably long compile
times when we have lots of artifact combiner activity.
To verify this, I added asserts to that function when it actually replaced a debug
use operand with undef for these artifacts. On CTMark with both -O0 and -Os and
debug info enabled, I didn't see a single case where it triggered.
In my measurements I saw around a 0.5% geomean compile-time improvement on -g -O0
for AArch64 with this change.
Differential Revision: https://reviews.llvm.org/D109750
Add eraseInstr(s) utility functions. Before deleting an instruction
collects its use instructions. After deletion deletes use instructions
that became trivially dead.
This patch clears all dead instructions in existing legalizer mir tests.
Differential Revision: https://reviews.llvm.org/D109154
Mostly this fixes cases where !noalias or !alias.scope were passed
a scope rather than a scope list. In some cases I opted to drop
the metadata entirely instead, because it is not really relevant
to the test.
This simple heuristic uses the estimated live range length combined
with the number of registers in the class to switch which heuristic to
use. This was taking the raw number of registers in the class, even
though not all of them may be available. AMDGPU heavily relies on
dynamically reserved numbers of registers based on user attributes to
satisfy occupancy constraints, so the raw number is highly misleading.
There are still a few problems here. In the original testcase that
made me notice this, the live range size is incorrect after the
scheduler rearranges instructions, since the instructions don't have
the original InstrDist offsets. Additionally, I think it would be more
appropriate to use the number of disjointly allocatable registers in
the class. For the AMDGPU register tuples, there are a large number of
registers in each tuple class, but only a small fraction can actually
be allocated at the same time since they all overlap with each
other. It seems we do not have a query that corresponds to the number
of independently allocatable registers. Relatedly, I'm still debugging
some allocation failures where overlapping tuples seem to not be
handled correctly.
The test changes are mostly noise. There are a handful of x86 tests
that look like regressions with an additional spill, and a handful
that now avoid a spill. The worst looking regression is likely
test/Thumb2/mve-vld4.ll which introduces a few additional
spills. test/CodeGen/AMDGPU/soft-clause-exceeds-register-budget.ll
shows a massive improvement by completely eliminating a large number
of spills inside a loop.
Use GCNHazardRecognizer in postra sched.
Updated tests for the new schedules.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D109536
Change-Id: Ia86ba2ae168f12fb34b4d8efdab491f84d936cde
Legalizing G_MUL for non-standard types (like i33) generated an error. Putting
minScalar and maxScalar instead of clampScalar. Also using new rule, instead
of widening to the next power of 2, widen to the next multiple of the passed
argument (32 in this case), so instead of widening i65 to i128, we widen it to
i96.
Patch by: Mateja Marjanovic
Differential Revision: https://reviews.llvm.org/D109228
Add implementation for the legalization of G_ROTL and G_ROTR machine
instructions. They are very similar to funnel shift instructions, the only
difference is funnel shifts have 3 operands, whereas rotate instructions have
two operands, the first being the register that is being rotated and the second
being the number of shifts. The legalization of G_ROTL/G_ROTR is just lowering
them into funnel shift instructions if they are legal.
Patch by: Mateja Marjanovic
Differential Revision: https://reviews.llvm.org/D105347
Legalize G_MEMCPY, G_MEMMOVE, G_MEMSET and G_MEMCPY_INLINE.
Corresponding intrinsics are replaced by a loop that uses loads/stores in
AMDGPULowerIntrinsics pass unless their length is a constant lower then
MemIntrinsicExpandSizeThresholdOpt (default 1024). Any G_MEM* instruction that
reaches legalizer should have a const length argument and should be expanded
into appropriate number of loads + stores.
Differential Revision: https://reviews.llvm.org/D108357
The sext_inreg_of_load combine did not have the isLegalOrBeforeLegalizer check,
leading to the generation of potentially illegal G_SEXTLOADs when run after legalization.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D108626
When Src and Dst used in buildAnyExtOrTrunc or buildSExtOrTrunc
have the same type (creates COPY) use Src register directly or
use replaceRegOrBuildCopy instead.
Differential Revision: https://reviews.llvm.org/D108306
As mentioned on D107474, there was a copy+paste typo repeating G_CTLZ_ZERO_UNDEF that coverity reported as dead code.
Differential Revision: https://reviews.llvm.org/D108210
Combine two G_PTR_ADDs, but keep the register bank of the constant.
That way, the combine can be used in post-regbank-select combines.
Introduce two helper methods in CombinerHelper, getRegBank and
setRegBank that get and set an optional register bank to a register.
That way, they can be used before and after register bank selection.
Differential Revision: https://reviews.llvm.org/D103326
The requested register class priorities weren't respected
globally. Not sure why this is a target option, and not just the
expected behavior (recently added in
1a6dc92be7d68611077f0fb0b723b361817c950c). This avoids an allocation
failure when many wide tuple spills are introduced. I think this is a
workaround since I would not expect the allocation priority to be
required, and only a performance hint. The allocator should be smarter
about when only a subregister needs to be spilled and restored.
This does regress a couple of degenerate store stress lit tests which
shouldn't be too important.
If a G_SHL is fed by a G_CONSTANT, the lower and upper bits of the source can be
shifted individually by the constant shift amount.
However in case the shift amount came from a G_TRUNC(G_CONSTANT), the generic shift legalization
code was used, producing intermediate shifts that are potentially illegal on some targets.
This change teaches narrowScalarShift to look through G_TRUNCs and G_*EXTs.
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D89100
We can improve on the generic splitting by using ffbh/ffbl, which have a
defined result when the input is zero.
Differential Revision: https://reviews.llvm.org/D107442
This is the counterpart to G_AMDGPU_FFBH_U32 which already exists. These
instructions have a defined result of -1 when the input is zero.
Differential Revision: https://reviews.llvm.org/D107441
In some cases, like with inserts, we may have a matching size register already,
but still decide to try to look further. This change adds a CurrentBest
register to the value finder state, and any time a method fails to make progress,
returns that register (which may just be an empty Register).
To facilitate this, add a new entry point to the findValueFromDef() function
which initializes this state.
Also fix the build vector finder to return the current build_vector if all
sources are being requested.
Differential Revision: https://reviews.llvm.org/D107017
