Summary:
This patch adds a new intrinsic and builtin function mirroring the
existing `__builtin_readcyclecounter`. The difference is that this
implementation targets a separate counter that some targets have which
returns a fixed frequency clock that can be used to determine elapsed
time, this is different compared to the cycle counter which often has
variable frequency.
This patch only adds support for the NVPTX and AMDGPU targets.
This is done as a new and separate builtin rather than an argument to
`readcyclecounter` to avoid needing to change existing code and to make
the separation more explicit.
Prior to this patch, SelectionDAG generated aligned move onto stacks for
AVX registers when the function was marked as a no-realign-stack
function. This lead to misalignment between the stack and the
instruction generated. This patch fixes the issue.
Fixes#77730
There are some intrinsics are using i16 vectors in place of bfloat
vectors.
Move towards making bf16 vectors legal so these can migrate. Leave the
larger vectors for a later change.
Depends #76213#76214
It seems TypeSize is currently broken in the sense that:
TypeSize::Fixed(4) + TypeSize::Scalable(4) => TypeSize::Fixed(8)
without failing its assert that explicitly tests for this case:
assert(LHS.Scalable == RHS.Scalable && ...);
The reason this fails is that `Scalable` is a static method of class
TypeSize,
and LHS and RHS are both objects of class TypeSize. So this is
evaluating
if the pointer to the function Scalable == the pointer to the function
Scalable,
which is always true because LHS and RHS have the same class.
This patch fixes the issue by renaming `TypeSize::Scalable` ->
`TypeSize::getScalable`, as well as `TypeSize::Fixed` to
`TypeSize::getFixed`,
so that it no longer clashes with the variable in
FixedOrScalableQuantity.
The new methods now also better match the coding standard, which
specifies that:
* Variable names should be nouns (as they represent state)
* Function names should be verb phrases (as they represent actions)
This will select i32 operations directly to W instructions without
custom nodes. Hopefully this can allow us to be less dependent on
hasAllNBitUsers to recover i32 operations in RISCVISelDAGToDAG.cpp.
This support is enabled with a command line option that is off by
default.
Generated code is still not optimal.
I've duplicated many test cases for this, but its not complete. Enabling this runs all existing lit tests without crashing.
Partial progress towards removing in-tree uses of `getPointerTo()`,
by employing the following options:
* Drop the call entirely if the sole purpose of it is to support a no-op
bitcast (remove the no-op bitcast as well).
* Replace with `PointerType::get()`/`PointerType::getUnqual()`
This is a NFC cleanup effort.
Reviewed By: barannikov88
Differential Revision: https://reviews.llvm.org/D155232
We currently have log, log2, log10, exp and exp2 intrinsics. Add exp10
to fix this asymmetry. AMDGPU already has most of the code for f32
exp10 expansion implemented alongside exp, so the current
implementation is duplicating nearly identical effort between the
compiler and library which is inconvenient.
https://reviews.llvm.org/D157871
Irritatingly, atomic_store had operands in the opposite order from
regular store. This made it difficult to share patterns between
regular and atomic stores.
There was a previous incomplete attempt to move atomic_store into the
regular StoreSDNode which would be better.
I think it was a mistake for all atomicrmw to swap the operand order,
so maybe it's better to take this one step further.
https://reviews.llvm.org/D123143
The CodeView `S_ARMSWITCHTABLE` debug symbol is used to describe the layout of a jump table, it contains the following information:
* The address of the branch instruction that uses the jump table.
* The address of the jump table.
* The "base" address that the values in the jump table are relative to.
* The type of each entry (absolute pointer, a relative integer, a relative integer that is shifted).
Together this information can be used by debuggers and binary analysis tools to understand what an jump table indirect branch is doing and where it might jump to.
Documentation for the symbol can be found in the Microsoft PDB library dumper: 0fe89a942f/cvdump/dumpsym7.cpp (L5518)
This change adds support to LLVM to emit the `S_ARMSWITCHTABLE` debug symbol as well as to dump it out (for testing purposes).
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D149367
This reverts commit 8d0c3db388143f4e058b5f513a70fd5d089d51c3.
Causes crashes, see comments in https://reviews.llvm.org/D149367.
Some follow-up fixes are also reverted:
This reverts commit 636269f4fca44693bfd787b0a37bb0328ffcc085.
This reverts commit 5966079cf4d4de0285004eef051784d0d9f7a3a6.
This reverts commit e7294dbc85d24a08c716d9babbe7f68390cf219b.
The CodeView `S_ARMSWITCHTABLE` debug symbol is used to describe the layout of a jump table, it contains the following information:
* The address of the branch instruction that uses the jump table.
* The address of the jump table.
* The "base" address that the values in the jump table are relative to.
* The type of each entry (absolute pointer, a relative integer, a relative integer that is shifted).
Together this information can be used by debuggers and binary analysis tools to understand what an jump table indirect branch is doing and where it might jump to.
Documentation for the symbol can be found in the Microsoft PDB library dumper: 0fe89a942f/cvdump/dumpsym7.cpp (L5518)
This change adds support to LLVM to emit the `S_ARMSWITCHTABLE` debug symbol as well as to dump it out (for testing purposes).
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D149367
The change introduces intrinsics 'get_fpmode', 'set_fpmode' and
'reset_fpmode'. They manage all target dynamic floating-point control
modes, which include, for instance, rounding direction, precision,
treatment of denormals and so on. The intrinsics do the same
operations as the C library functions 'fegetmode' and 'fesetmode'. By
default they are lowered to calls to these functions.
Two main use cases are supported by this implementation.
1. Local modification of the control modes. In this case the code
usually has a pattern (in pseudocode):
saved_modes = get_fpmode()
set_fpmode(<new_modes>)
...
<do operations under the new modes>
...
set_fpmode(saved_modes)
In the case when it is known that the current FP environment is default,
the code may be shorter:
set_fpmode(<new_modes>)
...
<do operations under the new modes>
...
reset_fpmode()
Such patterns appear not only in user code but also in implementations
of various FP controlling pragmas. In particular, the implementation of
`#pragma STDC FENV_ROUND` requires similar code if the target does not
support static rounding mode.
2. Portable control of FP modes. Usually FP control modes are set by
writing to some control register. Different targets have different
layout of this register, the way the register is accessed also may be
different. Using set of target-specific definitions for the control
register bits together with these intrinsic functions provides enough
portable way to handle control modes across wide range of hardware.
This change defines only llvm intrinsic function, which implement the
access required for the aforementioned use cases.
Differential Revision: https://reviews.llvm.org/D82525
For most fp16 vector ops, we could promote it to fp32 vector when zvfhmin is enable but zvfh is not.
But for nxv32f16, we need to split it first since nxv32f32 is not a valid MVT.
Reviewed By: michaelmaitland
Differential Revision: https://reviews.llvm.org/D153848
For RISC-V, getRegisterType for fp16 returns i16. i16->fp64 extload
is considered legal because the LoadExtActions defaults to Legal
for all entries. Only fp/fp and int/int entries are changed to
Expand fore RISC-V.
This patch detects the FP-ness has changed and won't try to call
isLoadExtLegal.
Alternatively, we could add Expand for int/fp and fp/int, but that
seemed a little silly.
Fixes#63816
Reviewed By: asb, wangpc
Differential Revision: https://reviews.llvm.org/D155040
The ExpandLibcallResult result was a bitcast and not the direct call
result, so we couldn't find the chain. Use the new separate chain
return value instead.
If the libcall expansion requires use of the inserted call's result
chain, it's unreliable to query it from the main result. The call
lowering may have added additional casts or other obscuring operations
we don't want to parse through.
Add an intrinsic which returns the two pieces as multiple return
values. Alternatively could introduce a pair of intrinsics to
separately return the fractional and exponent parts.
AMDGPU has native instructions to return the two halves, but could use
some generic legalization and optimization handling. For example, we
should be able to handle legalization of f16 on older targets, and for
bf16. Additionally antique targets need a hardware workaround which
would be better handled in the backend rather than in library code
where it is now.
This patch introduces the reduction intrinsic for floating point minimum
and maximum which has the same semantics (for NaN and signed zero) as
llvm.minimum and llvm.maximum.
Reviewed-By: nikic
Differential Revision: https://reviews.llvm.org/D152370
AMDGPU has native instructions and target intrinsics for this, but
these really should be subject to legalization and generic
optimizations. This will enable legalization of f16->f32 on targets
without f16 support.
Implement a somewhat horrible inline expansion for targets without
libcall support. This could be better if we could introduce control
flow (GlobalISel version not yet implemented). Support for strictfp
legalization is less complete but works for the simple cases.
The change implements intrinsics 'get_fpenv', 'set_fpenv' and 'reset_fpenv'.
They are used to read floating-point environment, set it or reset to
some default state. They do the same actions as C library functions
'fegetenv' and 'fesetenv'. By default these intrinsics are lowered to calls
to these functions.
The new intrinsics specify FP environment as a value of integer type, it
is convenient of most targets where the FP state is a content of some
register. Some targets however use long representations. On X86 the size
of FP environment is 256 bits, and even half of this size is not a legal
ibteger type. To facilitate legalization in such cases, two sets of DAG
nodes is used. Nodes GET_FPENV and SET_FPENV are used when FP
environment may be represented by a legal integer type. Nodes
GET_FPENV_MEM and SET_FPENV_MEM consider FP environment as a region in
memory, much like `fesetenv` and `fegetenv` do. They are used when
target has long representation for floationg-point state.
Differential Revision: https://reviews.llvm.org/D71742
This is rework of;
- rG13e77db2df94 (r328395; MVT)
Since `LowLevelType.h` has been restored to `CodeGen`, `MachinveValueType.h`
can be restored as well.
Depends on D148767
Differential Revision: https://reviews.llvm.org/D149024
Address the inconsistency between FLT_ROUNDS_ and SET_ROUNDING SDAG
node. Rename FLT_ROUNDS_ to GET_ROUNDING and add llvm.get.rounding
intrinsic to replace flt.rounds.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D139507
- [Clang] Declare AMDGPU target as supporting BF16 for storage-only purposes on amdgcn
- Add Sema & CodeGen tests cases.
- Also add cases that D138651 would have covered as this patch replaces it.
- [AMDGPU] Add BF16 storage-only support
- Support legalization/dealing with bf16 operations in DAGIsel.
- bf16 as a type remains illegal and is represented as i16 for storage purposes.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D139398
Much like f16 and f32, we shouldn't try to shrink bf16 to smaller fp
constant. The code may not be optimal, but this allows us to legalize
bf16 constants under Arm without errors.
All in-tree targets pass pointer-sized ConstantSDNodes to the
method. This overload reduced amount of boilerplate code a bit. This
also makes getCALLSEQ_END consistent with getCALLSEQ_START, which
already takes uint64_ts.
The main difference is that this preserves intermediate rounding steps,
which the other route doesn't. This aligns bfloat16 more with half
floats, which use this path on most targets.
I didn't understand what the difference was between these softening
approaches when I first added bfloat lowerings, would be nice if we only
had one of them.
Based on @pengfei 's D131502
Differential Revision: https://reviews.llvm.org/D133207
