When we fill the shape to tile configure memory, the shape is gotten
from AMX pseudo instruction. However the register for the shape may be
split or spilled by greedy RA. That cause we fill the shape to config
memory after ldtilecfg is executed, so that the shape configuration
would be wrong.
This patch is to split the tile register allocation from greedy register
allocation, so that after tile registers are allocated the shape
registers are still virtual register. The shape register only may be
redefined or multi-defined by phi elimination pass, two address pass.
That doesn't affect tile register configuration.
Differential Revision: https://reviews.llvm.org/D128584
Add a new pattern A - (B + C) ==> (A - B) - C to give machine combiner a chance
to evaluate which instruction sequence has lower latency.
Differential Revision: https://reviews.llvm.org/D124564
This is a resurrection of D106421 with the change that it keeps backward-compatibility. This means decoding the previous version of `LLVM_BB_ADDR_MAP` will work. This is required as the profile mapping tool is not released with LLVM (AutoFDO). As suggested by @jhenderson we rename the original section type value to `SHT_LLVM_BB_ADDR_MAP_V0` and assign a new value to the `SHT_LLVM_BB_ADDR_MAP` section type. The new encoding adds a version byte to each function entry to specify the encoding version for that function. This patch also adds a feature byte to be used with more flexibility in the future. An use-case example for the feature field is encoding multi-section functions more concisely using a different format.
Conceptually, the new encoding emits basic block offsets and sizes as label differences between each two consecutive basic block begin and end label. When decoding, offsets must be aggregated along with basic block sizes to calculate the final offsets of basic blocks relative to the function address.
This encoding uses smaller values compared to the existing one (offsets relative to function symbol).
Smaller values tend to occupy fewer bytes in ULEB128 encoding. As a result, we get about 17% total reduction in the size of the bb-address-map section (from about 11MB to 9MB for the clang PGO binary).
The extra two bytes (version and feature fields) incur a small 3% size overhead to the `LLVM_BB_ADDR_MAP` section size.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D121346
`commonAlignment` is a shortcut to pick the smallest of two `Align`
objects. As-is it doesn't bring much value compared to `std::min`.
Differential Revision: https://reviews.llvm.org/D128345
Information in the function `Prologue Data` is intentionally opaque.
When a function with `Prologue Data` is duplicated. The self (global
value) references inside `Prologue Data` is still pointing to the
original function. This may cause errors like `fatal error: error in backend: Cannot represent a difference across sections`.
This patch detaches the information from function `Prologue Data`
and attaches it to a function metadata node.
This and D116130 fix https://github.com/llvm/llvm-project/issues/49689.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D115844
This commit modifies the AsmPrinter to avoid emitting any zero-sized symbols to
the .debug_aranges table, by rounding their size up to 1. Entries with zero
length violate the DWARF 5 spec, which states:
> Each descriptor is a triple consisting of a segment selector, the beginning
> address within that segment of a range of text or data covered by some entry
> owned by the corresponding compilation unit, followed by the non-zero length
> of that range.
In practice, these zero-sized entries produce annoying warnings in lld and
cause GNU binutils to truncate the table when parsing it.
Other parts of LLVM, such as DWARFDebugARanges in the DebugInfo module
(specifically the appendRange method), already avoid emitting zero-sized
symbols to .debug_aranges, but not comprehensively in the AsmPrinter. In fact,
the AsmPrinter does try to avoid emitting such zero-sized symbols when labels
aren't involved, but doesn't when the symbol to emitted is a difference of two
labels; this patch extends that logic to handle the case in which the symbol is
defined via labels.
Furthermore, this patch fixes a bug in which `available_externally` symbols
would cause unpredictable values to be emitted into the `.debug_aranges` table
under certain circumstances. In practice I don't believe that this caused
issues up until now, but the root cause of this bug--an invalid DenseMap
lookup--triggered failures in Chromium when combined with an earlier version of
this patch. Therefore, this patch fixes that bug too.
This is a revised version of diff D126257, which was reverted due to breaking
tests. The now-reverted version of this patch didn't distinguish between
symbols that didn't have their size reported to the DwarfDebug handler and
those that had their size reported to be zero. This new version of the patch
instead restricts the special handling only to the symbols whose size is
definitively known to be zero.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D126835
These intrinsics are now fundemental for SVE code generation and have been
present for a year and a half, hence move them out of the experimental
namespace.
Differential Revision: https://reviews.llvm.org/D127976
Patch was reverted in 4c5f10a due to buildbot failures, now being
reapplied with updated AArch64 and RISCV tests.
This patch adds handling for the llvm.powi.* intrinsics in
BasicTTIImplBase::getIntrinsicInstrCost() and improves vectorization.
Closes#53887.
Differential Revision: https://reviews.llvm.org/D128172
If an instruction is sunk into a loop then any kill flags on
operands declared outside the loop must be cleared as these
will be live for all loop iterations.
Fixes#46827
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D126754
According to the vector spec, mf8 is not supported for i8 if ELEN
is 32. Similarily mf4 is not suported for i16/f16 or mf2 for i32/f32.
Since RVVBitsPerBlock is 64 and LMUL is calculated as
((MinNumElements * ElementSize) / RVVBitsPerBlock) this means we
need to disable any type with MinNumElements==1.
For generic IR, these types will now be widened in type legalization.
For RVV intrinsics, we'll probably hit a fatal error somewhere. I plan
to work on disabling the intrinsics in the riscv_vector.h header.
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D128286
waitcnt vmcnt instructions are currently generated in loop bodies before using
values loaded outside of the loop. In some cases, it is better to flush the
vmcnt counter in a loop preheader before entering the loop body. This patch
detects these cases and generates waitcnt instructions to flush the counter.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D115747
This reverts commit 719658d078c4093d1ee716fb65ae94673df7b22b.
Breaks a few things, see comments on https://reviews.llvm.org/D128437
There's disagreement about the best fix.
So let's keep HEAD green while discussions are happening.
The base RA support infrastructure that only allow a specific register
class be allocated in RA pss. Since greedy RA, basic RA derived from
base RA, they all allow allocating specific register class. Fast RA
doesn't support allocating register for specific register class. This
patch is to enable ShouldAllocateClass in fast RA, so that it can
support allocating register for specific register class.
Differential Revision: https://reviews.llvm.org/D126771
We're slowly removing SelectionDAG::GetDemandedBits and replacing it with SimplifyMultipleUseDemandedBits, we no longer have any uses for the vector demanded elt variant.
This patch adds handling for the llvm.powi.* intrinsics in
BasicTTIImplBase::getIntrinsicInstrCost() and improves vectorization.
Closes#53887.
Differential Revision: https://reviews.llvm.org/D128172
For below case, virtual register is defined twice in the self loop. We
don't need to spill %0 after the third instruction `%0 = def (tied %0)`,
because it is defined in the second instruction `%0 = def`.
1 bb.1
2 %0 = def
3 %0 = def (tied %0)
4 ...
5 jmp bb.1
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D125079
An AArch64ISD::DUP is just a splat, where the known bits for each lane
are the same as the input. This teaches that to computeKnownBitsForTargetNode.
Problems arise for constants though, as a constant BUILD_VECTOR can be
lowered to an AArch64ISD::DUP, which SimplifyDemandedBits would then
turn back into a constant BUILD_VECTOR leading to an infinite cycle.
This has been prevented by adding a isTargetCanonicalConstantNode node
to prevent the conversion back into a BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D128144
