- Remove pass initialization calls from pass constructors.
- For some passes, add the initialization to `initializeCodeGen` or
`initializeGlobalISel`.
- Remove redundant initializations from llc and X86 target for some
passes.
(1) Define `CSRSavedLocation::Kind` and use it in the code. This makes
the code more readable and allows to extend it to new kinds. For
example, soon I want to add "scalable offset from a given register"
kind.
(2) Store the contents in a union. This should reduce memory usage.
Add operator==, clarify invariants with an assert.
This does convert one llvm_unreachable into an assert which runs earlier
in the computation. I don't believe the difference is observable outside
debug builds, and should report the fault closer to introduction.
This prevents it from being optimized out in non-asserts builds.
Update X86 test to remove REQUIRES: asserts and check for LLVM ERROR.
Add FileCheck to RISC-V test and remove UNSUPPORTED.
This is the more complete fix for #168772 and #168525.
These specify that the value of the given register in the previous frame
is the CFA plus some offset. This isn't very common but can be necessary
if the original value is normally reconstructed from the stack/frame
pointer instead of being saved on the stack and reloaded from there.
As part of FEAT_PAuthLR, a new DWARF Frame Instruction was introduced,
`DW_CFA_AARCH64_negate_ra_state_with_pc`. This instructs Libunwind that
the PC has been used with the signing instruction. This change includes
three commits
- Libunwind support for the newly introduced DWARF Instruction
- CodeGen Support for the DWARF Instructions
- Reversing the changes made in #96377. Due to
`DW_CFA_AARCH64_negate_ra_state_with_pc`'s requirements to be placed
immediately after the signing instruction, this would mean the CFI
Instruction location was not consistent with the generated location when
not using FEAT_PAuthLR. The commit reverses the changes and makes the
location consistent across the different branch protection options.
While this does have a code size effect, this is a negligible one.
For the ABI information, see here:
853286c7ab/aadwarf64/aadwarf64.rst (id23)
This patch fixes https://github.com/llvm/llvm-project/issues/17204.
If a base pointer is used in a function, and it is clobbered by an
instruction (typically an inline asm), current register allocator can't
handle this situation, so BP becomes garbage after those instructions.
It can also occur to FP in theory.
We can spill and reload FP/BP registers around those instructions. But
normal spill/reload instructions also use FP/BP, so we can't spill them
into normal spill slots, instead we spill them into the top of stack by
using SP register.
Rebase of #84114. I've only included the core changes to frame layout
calculation & CFI generation which sidesteps the regressions found after
merging #84114. Since these changes are a necessary precursor to the
overall fix and are themselves slightly beneficial as CFI is now
generated correctly, I think it is reasonable to merge this first step.
---
For very large stack frames, the offset from the stack pointer to a
local can be more than 2^31 which overflows various `int` offsets in the
frame lowering code.
This patch updates the frame lowering code to calculate the offsets as
64-bit values and fixes CFI to use the corrected sizes.
After this patch, additional work is needed to fix offset truncations in
each target's codegen.
GNU assembler 2.26 introduced the .cfi_label directive. It does not
expand to any CFI instructions, but defines a label in
.eh_frame/.debug_frame, which can be used by runtime patching code to
locate the FDE. .cfi_label is not allowed for CIE's initial
instructions, and can therefore be used to force the next instruction to
be placed in a FDE instead of a CIE.
In glibc since 2018, sysdeps/riscv/start.S utilizes .cfi_label to force
DW_CFA_undefined to be placed in a FDE. arc/csky/loongarch ports have
copied this use.
```
.cfi_startproc
// DW_CFA_undefined is allowed for CIE's initial instructions.
// Without .cfi_label, gas would place DW_CFA_undefined in a CIE.
.cfi_label .Ldummy
.cfi_undefined ra
.cfi_endproc
```
No CFI instruction is associated with .cfi_label, so the `case
MCCFIInstruction::OpLabel:` code in BOLT is unreachable and onlt to make
-Wswitch happy.
Close#97222
Pull Request: https://github.com/llvm/llvm-project/pull/97922
For very large stack frames, the offset from the stack pointer to a local can be more than 2^31 which overflows various `int` offsets in the frame lowering code.
This patch updates the frame lowering code to calculate the offsets as 64-bit values and resolves the overflows, resulting in the correct codegen for very large frames.
Fixes#48911
This makes use of the more accurate register number introduced in PR
#70222 to avoid CFI calculations for unsupported registers.
This has basically no impact right now, but results in a 0.2% compile-time
improvement at O0 when applied on top of #70958.
The reason is that the extra registers that PR adds push the `BitVector`
out of the `SmallVector` space, which results in an outsized impact.
(This does make me wonder whether `BitVector` should accept an `N`
template parameter to allow using a larger `SmallVector`...)
Without frame pointers, the locations of variables on the stack are emitted
relative to the stack pointer (via the stack pointer being the value of
DW_AT_frame_base on the subprogram). If a call modifies the stack pointer
this results in the locations being wrong and the debugger displaying the
wrong values for variables.
By using DW_OP_call_frame_cfa in these situations the emitted location for
the variable will automatically handle changes in the stack pointer
(provided LLVM is emitting the correct CFI directives elsewhere, of course).
The CFA needs to be adjusted for the size of the stack frame (including the
return address) to allow the variable locations themselves to remain
unchanged by this patch.
Certain LLDB features cannot cope with DW_OP_call_frame_cfa, so this change
is heuristically limited to the cases where it's necessary for correctness
to minimize the fallout there.
Reviewed By: #debug-info, scott.linder, jryans, jmorse
Differential Revision: https://reviews.llvm.org/D143463
This reverts commit 7f230feeeac8a67b335f52bd2e900a05c6098f20.
Breaks CodeGenCUDA/link-device-bitcode.cu in check-clang,
and many LLVM tests, see comments on https://reviews.llvm.org/D121169
This diff renames emitCalleeSavedFrameMoves to avoid conflicts with
non-virtual methods of derived classes having the same name but different semantics.
E.g. the class AArch64FrameLowering used to have (non-virtual) "emitCalleeSavedFrameMoves"
but it started to override TargetFrameLowering::emitCalleeSavedFrameMoves after
https://github.com/llvm/llvm-project/commit/c3e6555616 though its usage and semantics didn't change.
P.S. for x86 there was no conflict because the signature of
non-virtual X86FrameLowering::emitCalleeSavedFrameMoves is different
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D114140
This avoids temporary and memcpy call when computing large expressions.
It's basically some kind of poor man's expression template, but it seems easier
to maintain to have a single generic `apply` call instead of the whole
expression template machinery here.
Differential Revision: https://reviews.llvm.org/D98176
This patch handles CFI with basic block sections, which unlike DebugInfo does
not support ranges. The DWARF standard explicitly requires emitting separate
CFI Frame Descriptor Entries for each contiguous fragment of a function. Thus,
the CFI information for all callee-saved registers (possibly including the
frame pointer, if necessary) have to be emitted along with redefining the
Call Frame Address (CFA), viz. where the current frame starts.
CFI directives are emitted in FDE’s in the object file with a low_pc, high_pc
specification. So, a single FDE must point to a contiguous code region unlike
debug info which has the support for ranges. This is what complicates CFI for
basic block sections.
Now, what happens when we start placing individual basic blocks in unique
sections:
* Basic block sections allow the linker to randomly reorder basic blocks in the
address space such that a given basic block can become non-contiguous with the
original function.
* The different basic block sections can no longer share the cfi_startproc and
cfi_endproc directives. So, each basic block section should emit this
independently.
* Each (cfi_startproc, cfi_endproc) directive will result in a new FDE that
caters to that basic block section.
* Now, this basic block section needs to duplicate the information from the
entry block to compute the CFA as it is an independent entity. It cannot refer
to the FDE of the original function and hence must duplicate all the stuff that
is needed to compute the CFA on its own.
* We are working on a de-duplication patch that can share common information in
FDEs in a CIE (Common Information Entry) and we will present this as a follow up
patch. This can significantly reduce the duplication overhead and is
particularly useful when several basic block sections are created.
* The CFI directives are emitted similarly for registers that are pushed onto
the stack, like callee saved registers in the prologue. There are cfi
directives that emit how to retrieve the value of the register at that point
when the push happened. This has to be duplicated too in a basic block that is
floated as a separate section.
Differential Revision: https://reviews.llvm.org/D79978
like .cfi_restore"
Insert .cfi_offset/.cfi_register when IncomingCSRSaved of current block
is larger than OutgoingCSRSaved of its previous block.
Original commit message:
https://reviews.llvm.org/D42848 only handled CFA related cfi directives but
didn't handle CSR related cfi. The patch adds the CSR part. Basically it reuses
the framework created in D42848. For each basicblock, the patch tracks which
CSR set have been saved at its CFG predecessors's exits, and compare the CSR
set with the set at its previous basicblock's exit (The previous block is the
block laid before the current block). If the saved CSR set at its previous
basicblock's exit is larger, .cfi_restore will be inserted.
The patch also generates proper .cfi_restore in epilogue to make sure the
saved CSR set is consistent for the incoming edges of each block.
Differential Revision: https://reviews.llvm.org/D74303
https://reviews.llvm.org/D42848 only handled CFA related cfi directives but
didn't handle CSR related cfi. The patch adds the CSR part. Basically it reuses
the framework created in D42848. For each basicblock, the patch tracks which
CSR set have been saved at its CFG predecessors's exits, and compare the CSR
set with the set at its previous basicblock's exit (The previous block is the
block laid before the current block). If the saved CSR set at its previous
basicblock's exit is larger, .cfi_restore will be inserted.
The patch also generates proper .cfi_restore in epilogue to make sure the
saved CSR set is consistent for the incoming edges of each block.
Differential Revision: https://reviews.llvm.org/D74303
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
This adds a flag to LLVM and clang to always generate a .debug_frame
section, even if other debug information is not being generated. In
situations where .eh_frame would normally be emitted, both .debug_frame
and .eh_frame will be used.
Differential Revision: https://reviews.llvm.org/D67216
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
- Reapply changes intially introduced in r343089
- The archtecture info is no longer loaded whenever a DWARFContext is created
- The runtimes libraries (santiziers) make use of the dwarf context classes but
do not intialise the target info
- The architecture of the object can be obtained without loading the target info
- Adding a method to the dwarf context to get this information and multiplex the
string printing later on
Differential Revision: https://reviews.llvm.org/D55774
llvm-svn: 349472
- Add fix so that all code paths that create DWARFContext
with an ObjectFile initialise the target architecture in the context
- Add an assert that the Arch is known in the Dwarf CallFrameString method
llvm-svn: 343317
This caused the DebugInfo/Sparc/gnu-window-save.ll test to fail.
> Functions that have signed return addresses need additional dwarf support:
> - After signing the LR, and before authenticating it, the LR register is in a
> state the is unusable by a debugger or unwinder
> - To account for this a new directive, .cfi_negate_ra_state, is added
> - This directive says the signed state of the LR register has now changed,
> i.e. unsigned -> signed or signed -> unsigned
> - This directive has the same CFA code as the SPARC directive GNU_window_save
> (0x2d), adding a macro to account for multiply defined codes
> - This patch matches the gcc implementation of this support:
> https://patchwork.ozlabs.org/patch/800271/
>
> Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343103
Functions that have signed return addresses need additional dwarf support:
- After signing the LR, and before authenticating it, the LR register is in a
state the is unusable by a debugger or unwinder
- To account for this a new directive, .cfi_negate_ra_state, is added
- This directive says the signed state of the LR register has now changed,
i.e. unsigned -> signed or signed -> unsigned
- This directive has the same CFA code as the SPARC directive GNU_window_save
(0x2d), adding a macro to account for multiply defined codes
- This patch matches the gcc implementation of this support:
https://patchwork.ozlabs.org/patch/800271/
Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343089
With r295105, some 'noreturn' blocks (those that don't return and have no
successors) may be merged.
If such blocks' predecessors have different outgoing offset or register, don't
report an error in CFIInstrInserter verify().
Thanks to Vlad Tsyrklevich for reporting the issue.
Differential Revision: https://reviews.llvm.org/D51161
llvm-svn: 341087
