Verify the format is valid and the type is one of the expected
i32 vectors. Verify the used vector types at least cover the
requirements of the corresponding format operand.
Add a property to allow marking target extension types that cannot be
used in an alloca instruction or byval argument, similar to CanBeGlobal
for global variables.
---------
Co-authored-by: Nikita Popov <github@npopov.com>
Improve the information printed when -memprof-report-hinted-sizes is
enabled. Now print the full context hash computed from the original
profile, similar to what we do when reporting matching statistics. This
will make it easier to correlate with the profile.
Note that the full context hash must be computed at profile match time
and saved in the metadata and summary, because we may trim the context
during matching when it isn't needed for distinguishing hotness.
Similarly, due to the context trimming, we may have more than one full
context id and total size pair per MIB in the metadata and summary,
which now get a list of these pairs.
Remove the old aggregate size from the metadata and summary support.
One other change from the prior support is that we no longer write the
size information into the combined index for the LTO backends, which
don't use this information, which reduces unnecessary bloat in
distributed index files.
Relands 7ff3a9acd84654c9ec2939f45ba27f162ae7fbc3 after regenerating the
test case.
Supersedes the draft PR #94992, taking a different approach following
feedback:
* Lower in PreISelIntrinsicLowering
* Don't require that the number of bytes to set is a compile-time
constant
* Define llvm.memset_pattern rather than llvm.memset_pattern.inline
As discussed in the [RFC
thread](https://discourse.llvm.org/t/rfc-introducing-an-llvm-memset-pattern-inline-intrinsic/79496),
the intent is that the intrinsic will be lowered to loops, a sequence of
stores, or libcalls depending on the expected cost and availability of
libcalls on the target. Right now, there's just a single lowering path
that aims to handle all cases. My intent would be to follow up with
additional PRs that add additional optimisations when possible (e.g.
when libcalls are available, when arguments are known to be constant
etc).
This reverts commit 7ff3a9acd84654c9ec2939f45ba27f162ae7fbc3.
Recent scheduling changes means tests need to be re-generated. Reverting
to green while I do that.
Supersedes the draft PR #94992, taking a different approach following
feedback:
* Lower in PreISelIntrinsicLowering
* Don't require that the number of bytes to set is a compile-time
constant
* Define llvm.memset_pattern rather than llvm.memset_pattern.inline
As discussed in the [RFC
thread](https://discourse.llvm.org/t/rfc-introducing-an-llvm-memset-pattern-inline-intrinsic/79496),
the intent is that the intrinsic will be lowered to loops, a sequence of
stores, or libcalls depending on the expected cost and availability of
libcalls on the target. Right now, there's just a single lowering path
that aims to handle all cases. My intent would be to follow up with
additional PRs that add additional optimisations when possible (e.g.
when libcalls are available, when arguments are known to be constant
etc).
This patch introduces an experimental intrinsic for matching the
elements of one vector against the elements of another.
For AArch64 targets that support SVE2, the intrinsic lowers to a MATCH
instruction for supported fixed and scalar vector types.
# What
This PR renames the newly-introduced llvm attribute
`sanitize_realtime_unsafe` to `sanitize_realtime_blocking`. Likewise,
sibling variables such as `SanitizeRealtimeUnsafe` are renamed to
`SanitizeRealtimeBlocking` respectively. There are no other functional
changes.
# Why?
- There are a number of problems that can cause a function to be
real-time "unsafe",
- we wish to communicate what problems rtsan detects and *why* they're
unsafe, and
- a generic "unsafe" attribute is, in our opinion, too broad a net -
which may lead to future implementations that need extra contextual
information passed through them in order to communicate meaningful
reasons to users.
- We want to avoid this situation and make the runtime library boundary
API/ABI as simple as possible, and
- we believe that restricting the scope of attributes to names like
`sanitize_realtime_blocking` is an effective means of doing so.
We also feel that the symmetry between `[[clang::blocking]]` and
`sanitize_realtime_blocking` is easier to follow as a developer.
# Concerns
- I'm aware that the LLVM attribute `sanitize_realtime_unsafe` has been
part of the tree for a few weeks now (introduced here:
https://github.com/llvm/llvm-project/pull/106754). Given that it hasn't
been released in version 20 yet, am I correct in considering this to not
be a breaking change?
Type::isScalableTy and StructType::containsScalableVectorType failed to
detect some cases of structs containing scalable vectors because
containsScalableVectorType did not call back into isScalableTy to check
the element types. Fix this, which requires sharing the same Visited set
in both functions. Also change the external API so that callers are
never required to pass in a Visited set, and normalize the naming to
isScalableTy.
In a variety of places we change the bitwidth of a parameter but don't
update the attributes.
The issue in this case is from the `range` attribute when inlining
`__memset_chk`. `optimizeMemSetChk` will replace an `i32` with an
`i8`, and if the `i32` had a `range` attr assosiated it will cause an
error.
Fixes#112633
This is intended to solve a problem with lowering atomics in
OpenMP and C++ common to AMDGPU and NVPTX.
In OpenCL and CUDA, it is undefined behavior for an atomic instruction
to modify an object in thread private memory. In OpenMP, it is defined.
Correspondingly, the hardware does not handle this correctly. For
AMDGPU,
32-bit atomics work and 64-bit atomics are silently dropped. We
therefore
need to codegen this by inserting a runtime address space check,
performing
the private case without atomics, and fallback to issuing the real
atomic
otherwise. This metadata allows us to avoid this extra check and branch.
Handle this by introducing metadata intended to be applied to atomicrmw,
indicating they cannot access the forbidden address space.
This reverts commit 178fc4779ece31392a2cd01472b0279e50b3a199.
This attribute was not needed now that we are using the lsan style
ScopedDisabler for disabling this sanitizer
See #106736#106125
For more discussion
This patch is part of a set of patches that add an `-fextend-lifetimes`
flag to clang, which extends the lifetimes of local variables and
parameters for improved debuggability. In addition to that flag, the
patch series adds a pragma to selectively disable `-fextend-lifetimes`,
and an `-fextend-this-ptr` flag which functions as `-fextend-lifetimes`
for this pointers only. All changes and tests in these patches were
written by Wolfgang Pieb (@wolfy1961), while Stephen Tozer (@SLTozer)
has handled review and merging. The extend lifetimes flag is intended to
eventually be set on by `-Og`, as discussed in the RFC
here:
https://discourse.llvm.org/t/rfc-redefine-og-o1-and-add-a-new-level-of-og/72850
This patch implements a new intrinsic instruction in LLVM,
`llvm.fake.use` in IR and `FAKE_USE` in MIR, that takes a single operand
and has no effect other than "using" its operand, to ensure that its
operand remains live until after the fake use. This patch does not emit
fake uses anywhere; the next patch in this sequence causes them to be
emitted from the clang frontend, such that for each variable (or this) a
fake.use operand is inserted at the end of that variable's scope, using
that variable's value. This patch covers everything post-frontend, which
is largely just the basic plumbing for a new intrinsic/instruction,
along with a few steps to preserve the fake uses through optimizations
(such as moving them ahead of a tail call or translating them through
SROA).
Co-authored-by: Stephen Tozer <stephen.tozer@sony.com>
This patch is moving out stepvector intrinsic from the experimental
namespace.
This intrinsic exists in LLVM for several years now, and is widely used.
Verify that the arguments of a naked function are not used. They can
only be referenced via registers/stack in inline asm, not as IR values.
Doing so will result in assertion failures in the backend.
There's probably more that we should verify, though I'm not completely
sure what the constraints are (would it be correct to require that naked
functions are exactly an inline asm call + unreachable, or is more
allowed?)
Fixes https://github.com/llvm/llvm-project/issues/104718.
With opaque pointers we can just get the pointer type for the
resolver function by using PointerType::get, making the
GlobalIFunc::getResolverFunctionType function obsolete.
This commit adds LLVM Intrinsics and NVPTX codegen support for
`fence.proxy.tensormap` with lit tests under fence-proxy-tensormap.ll.
Also, added Intrinsics documentation in NVPTXUsage.rst
---------
Co-authored-by: gonzalobg <65027571+gonzalobg@users.noreply.github.com>
The 2^14 limit was completely arbitrary; the generic limit is still
arbitrary, but at least it's the same arbitrary limit as everything
else.
While I'm here, also add a verifier check for the ByValOrByRefSize.
This is the first step in being able to track the total profiled sizes
of allocations successfully marked as cold.
Under a new option -memprof-report-hinted-sizes:
- For unambiguous (non-context-sensitive) allocations, print the
profiled size and the allocation coldness, along with a hash of the
allocation's location (to allow for deduplication across modules or
inline instances).
- For context sensitive allocations, add the size as a 3rd operand on
the MIB metadata. A follow on patch will propagate this through to the
thin link where the sizes will be reported for each context after
cloning.
So far branch protection, sign return address, guarded control stack
attributes are
only emitted as module flags to indicate the functions need to be
generated with
those features.
The problem is in case of an LTO build the module flags are merged with
the `min`
rule which means if one of the module is not build with sign return
address then the features
will be turned off for all functions. Due to the functions take the
branch-protection and
sign-return-address features from the module flags. The
sign-return-address is
function level option therefore it is expected functions from files that
is
compiled with -mbranch-protection=pac-ret to be protected.
The inliner might inline functions with different set of flags as it
doesn't consider
the module flags.
This patch adds the attributes to all functions and drops the checking
of the module flags
for the code generation.
Module flag is still used for generating the ELF markers.
Also drops the "true"/"false" values from the
branch-protection-enforcement,
branch-protection-pauth-lr, guarded-control-stack attributes as presence
of the
attribute means it is on absence means off and no other option.
Releand with test fixes.
So far branch protection, sign return address, guarded control stack
attributes are
only emitted as module flags to indicate the functions need to be
generated with
those features.
The problem is in case of an LTO build the module flags are merged with
the `min`
rule which means if one of the module is not build with sign return
address then the features
will be turned off for all functions. Due to the functions take the
branch-protection and
sign-return-address features from the module flags. The
sign-return-address is
function level option therefore it is expected functions from files that
is
compiled with -mbranch-protection=pac-ret to be protected.
The inliner might inline functions with different set of flags as it
doesn't consider
the module flags.
This patch adds the attributes to all functions and drops the checking
of the module flags
for the code generation.
Module flag is still used for generating the ELF markers.
Also drops the "true"/"false" values from the
branch-protection-enforcement,
branch-protection-pauth-lr, guarded-control-stack attributes as presence
of the
attribute means it is on absence means off and no other option.
Due to the current order of metadata in DISubprgram, `Type` is processed
before `Unit` by the Verifier. This can cause a race and
use of garbage data. Consider the following code:
```
int test(int a[][5])
{
return a[0][2];
}
```
when compiled with clang, the control reaches
`Verifier::visitDISubrange` first with `CurrentSourceLang` still equal
to dwarf::DW_LANG_lo_user (32768). The `Verifier::visitDICompileUnit`
which sets the value of `CurrentSourceLang` is reached later. So
`Verifier::visitDISubrange` ends up using a wrong value of
`CurrentSourceLang`.
This behavior does not effect C like language much but is a problem for
Fortran. There is special processing in `Verifier::visitDISubrange` when
`CurrentSourceLang` is Fortran. With this problem, that special handling
is missed and verifier fails for any code that has Fortran's assumed
size array in a global subroutine.
Various solutions were tried to solve this problem before it was decided that
best course of action is to remove these checks from Verifier.
…f weights" #95136
Reverts #95060, and relands #86609, with the unintended code generation
changes addressed.
This patch implements the changes to LLVM IR discussed in
https://discourse.llvm.org/t/rfc-update-branch-weights-metadata-to-allow-tracking-branch-weight-origins/75032
In this patch, we add an optional field to MD_prof meatdata nodes for
branch weights, which can be used to distinguish weights added from
llvm.expect* intrinsics from those added via other methods, e.g. from
profiles or inserted by the compiler.
One of the major motivations, is for use with MisExpect diagnostics,
which need to know if branch_weight metadata originates from an
llvm.expect intrinsic. Without that information, we end up checking
branch weights multiple times in the case if ThinLTO + SampleProfiling,
leading to some inaccuracy in how we report MisExpect related
diagnostics to users.
Since we change the format of MD_prof metadata in a fundamental way, we
need to update code handling branch weights in a number of places.
We also update the lang ref for branch weights to reflect the change.
This patch implements the changes to LLVM IR discussed in
https://discourse.llvm.org/t/rfc-update-branch-weights-metadata-to-allow-tracking-branch-weight-origins/75032
In this patch, we add an optional field to MD_prof metadata nodes for
branch weights, which can be used to distinguish weights added from
`llvm.expect*` intrinsics from those added via other methods, e.g.
from profiles or inserted by the compiler.
One of the major motivations, is for use with MisExpect diagnostics,
which need to know if branch_weight metadata originates from an
llvm.expect intrinsic. Without that information, we end up checking
branch weights multiple times in the case if ThinLTO + SampleProfiling,
leading to some inaccuracy in how we report MisExpect related
diagnostics to users.
Since we change the format of MD_prof metadata in a fundamental way, we
need to update code handling branch weights in a number of places.
We also update the lang ref for branch weights to reflect the change.
When using the -mframe-chain=aapcs or -mframe-chain=aapcs-leaf options,
we cannot use r11 as an allocatable register, even if
-fomit-frame-pointer is also used. This is so that r11 will always point
to a valid frame record, even if we don't create one in every function.
This defines a new kind of IR Constant that represents a ptrauth signed
pointer, as used in AArch64 PAuth.
It allows representing most kinds of signed pointer constants used thus
far in the llvm ptrauth implementations, notably those used in the
Darwin and ELF ABIs being implemented for c/c++. These signed pointer
constants are then lowered to ELF/MachO relocations.
These can be simply thought of as a constant `llvm.ptrauth.sign`, with
the interesting addition of discriminator computation: the `ptrauth`
constant can also represent a combined blend, when both address and
integer discriminator operands are used. Both operands are otherwise
optional, with default values 0/null.
This change set restores commit 080978dd2067d0c9ea7e229aa7696c2480d89ef1 that was reverted to address ASAN
failures and includes a fix for the ASAN failures.
Following is the description of the change:
An earlier commit provided a way to decouple DXIL version from Shader
Model version by representing the DXIL version as `SubArch` in the DXIL
Target Triple and adding corresponding valid DXIL Arch types.
This change constructs DXIL target triple with DXIL version that is
deduced from Shader Model version specified in the following scenarios:
1. When compilation target profile is specified:
For e.g., DXIL target triple `dxilv1.8-unknown-shader6.8-library` is
constructed when `-T lib_6_8` is specified.
2. When DXIL target triple without DXIL version is specified:
For e.g., DXIL target triple `dxilv1.8-pc-shadermodel6.8-library` is
constructed when `-mtriple=dxil-pc-shadermodel6.8-library` is specified.
Updated relevant HLSL tests that check for target triple.
An earlier commit provided a way to decouple DXIL version from Shader
Model version by representing the DXIL version as `SubArch` in the DXIL
Target Triple and adding corresponding valid DXIL Arch types.
This change constructs DXIL target triple with DXIL version that is
deduced from Shader Model version specified in the following scenarios:
1. When compilation target profile is specified:
For e.g., DXIL target triple `dxilv1.8-unknown-shader6.8-library` is
constructed when `-T lib_6_8` is specified.
2. When DXIL target triple without DXIL version is specified:
For e.g., DXIL target triple `dxilv1.8-pc-shadermodel6.8-library` is
constructed when `-mtriple=dxil-pc-shadermodel6.8-library` is specified.
Updated relevant HLSL tests that check for target triple.
Validated that Clang (`check-clang`) and LLVM (`check-llvm`) regression
tests pass.
I'm planning to remove StringRef::equals in favor of
StringRef::operator==.
- StringRef::operator== outnumbers StringRef::equals by a factor of 22
under llvm/ in terms of their usage.
- The elimination of StringRef::equals brings StringRef closer to
std::string_view, which has operator== but not equals.
- S == "foo" is more readable than S.equals("foo"), especially for
!Long.Expression.equals("str") vs Long.Expression != "str".
This patch is moving out following intrinsics:
* vector.interleave2/deinterleave2
* vector.reverse
* vector.splice
from the experimental namespace.
All these intrinsics exist in LLVM for more than a year now, and are
widely used, so should not be considered as experimental.
