This helps canonicalize some address calculation. This would further
help immediate folding into memory load instructions in the backend.
The order changes to v_mad_u32_u24 is just because
@llvm.amdgcn.mul.u24.i32 was used in codegen prepare after this change.
It does not really change anything important.
We need to check that OpX does not write the sources of OpY, but if we
swap OpX and OpY with respect to program order, the check was not
swapped correctly.
The checks on gfx1250 can be relaxed slightly, that is planned for a
future patch.
---------
Co-authored-by: Matt Arsenault <arsenm2@gmail.com>
The 16-bit immediate operand of s_waitcnt_depctr / s_wait_alu has some
unused bits. Previously codegen would set these bits to 1, but setting
them to 0 matches the SP3 assembler behaviour better, which in turn
means that we can print them using the human readable SP3 syntax:
s_wait_alu 0xfffd ; unused bits set to 1
s_wait_alu 0xff9d ; unused bits set to 0
s_wait_alu depctr_va_vcc(0) ; unused bits set to 0, human readable
Note that the set of unused bits changed between GFX10.1 and GFX10.3.
Reland PR https://github.com/llvm/llvm-project/pull/162352. Fix by
excluding SI_PC_ADD_REL_OFFSET from instructions that set SCC = DST!=0.
Passes check-libc-amdgcn-amd-amdhsa now.
Distribution of instructions that allowed a redundant S_CMP to be
deleted in check-libc-amdgcn-amd-amdhsa test:
```
S_AND_B32 485
S_AND_B64 47
S_ANDN2_B32 42
S_ANDN2_B64 277492
S_CSELECT_B64 17631
S_LSHL_B32 6
S_OR_B64 11
```
---------
Signed-off-by: John Lu <John.Lu@amd.com>
Co-authored-by: Matt Arsenault <arsenm2@gmail.com>
Recent upstream trends have moved away from explicitly using `-verify-machineinstrs`, as it's already covered by the expensive checks. This PR removes almost all `-verify-machineinstrs` from tests in `llvm/test/CodeGen/AMDGPU/*.ll`, leaving only those tests where its removal currently causes failures.
instructionWaitsForSGPRWrites function covers ALL SALU instructions,
including those like s_waitcnt that don't read from sgpr. This results
in removing delay_alu instructions in cases like VALU->SGPR->VALU, which
results in performance regression. Change modifies the function so that
it checks if instruction also reads a sgpr.
We have a VALU->SGPR->SALU (VALU writing to SGPR and SALU reading from
it). When VALU is issued, it increments internal counter VA_SDST used to
track use of this SGPR. SALU will not issue until VA_SDST is zero, that
is when VALU is finished writing. Therefore, delays added by s_delay_alu
are not needed in this situation.
We have a VALU->SGPR->SALU (VALU writing to SGPR and SALU reading from
it). When VALU is issued, it increments internal counter VA_SDST used to
track use of this SGPR. SALU will not issue until VA_SDST is zero, that
is when VALU is finished writing. Therefore, delays added by s_delay_alu
are not needed in this situation.
MSG_DEALLOC_VGPRS slows down very small waveslot limited kernels. It's
been identified this message is only really needed for VGPR limited
kernels. A kernel becomes VGPR limited if a total number of VGPRs per
SIMD / number of used VGPRs is more than a number of wave slots.
Any SGPR read by a VALU can potentially obscure SALU writes to the same
register.
Insert s_wait_alu instructions to mitigate the hazard on affected paths.
Compute a global cache of SGPRs with any VALU reads and use this to
avoid inserting mitigation for SGPRs never accessed by VALUs.
To avoid excessive search when compile time is priority implement
secondary mode where all SALU writes are mitigated.
Co-authored-by: Shilei Tian <shilei.tian@amd.com>
They are no longer needed after the patch: [AMDGPU] Remove wavefrontsize
feature from GFX10: https://github.com/llvm/llvm-project/pull/98400
The exception is when "target-features" are set to "+wavefrontsize32" or
"+wavefrontsize64", we still need to remove a wavefrontsize feature
before add a different one to make sure only one of them are present.
For targets that support xnack replay feature (gfx8+), the
multi-dword scalar loads shouldn't clobber any register that
holds the src address. The constrained version of the scalar
loads have the early clobber flag attached to the dst operand
to restrict RA from re-allocating any of the src regs for its
dst operand.
This reverts commit adaff46d087799072438dd744b038e6fd50a2d78.
Drop the -O3 checks from default-attributes.hip. I don't know why they
are different on some bots but reverting this is far too disruptive.
Removing it from the codegen pipeline induces a lot of test churn
because llc is no longer optimizing out implicit arguments to kernels.
Mostly mechanical, but there are some creative test updates. I preferred
to take the changes as-is in tests where the ABI isn't relevant. In
cases where it's more relevant, or the optimize out logic was too
ingrained in the test, I pre-run the optimization. Some cases manually
add attributes to disable inputs.
Update SIMemoryLegalizer and SIInsertWaitcnts to use separate wait
instructions per counter (e.g. S_WAIT_LOADCNT) and split VMCNT into
separate LOADCNT, SAMPLECNT and BVHCNT counters.
Similar to 806761a7629df268c8aed49657aeccffa6bca449.
For IR files without a target triple, -mtriple= specifies the full
target triple while -march= merely sets the architecture part of the
default target triple, leaving a target triple which may not make sense,
e.g. amdgpu-apple-darwin.
Therefore, -march= is error-prone and not recommended for tests without
a target triple. The issue has been benign as we recognize
$unknown-apple-darwin as ELF instead of rejecting it outrightly.
This patch changes AMDGPU tests to not rely on the default
OS/environment components. Tests that need fixes are not changed:
```
LLVM :: CodeGen/AMDGPU/fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fabs.ll
LLVM :: CodeGen/AMDGPU/floor.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.ll
LLVM :: CodeGen/AMDGPU/r600-infinite-loop-bug-while-reorganizing-vector.ll
LLVM :: CodeGen/AMDGPU/schedule-if-2.ll
```
This reverts commit 37114036aa57e53217a57afacd7f47b36114edfb.
The output of mbcnt does not depend on other active lanes, and hence it is not
convergent. The original change was made as a possible fix for
https://github.com/ROCm-Developer-Tools/HIP/issues/3172
But changing mbcnt does not fix that issue.
Reviewed By: ruiling, foad, yaxunl
Differential Revision: https://reviews.llvm.org/D153953
Atomic optimizer is turned on by default through D152649. This patch
removes the usage of old command line option amdgpu-atomic-optimizations
and transfer the responsibility to `amdgpu-atomic-optimizer-strategy`.
We can safely remove old option when LLPC remove its all usage.
Reviewed By: foad, arsenm, #amdgpu, cdevadas
Differential Revision: https://reviews.llvm.org/D153007
This patch provides an alternative implementation to DPP for Scan Computations.
An alternative implementation iterates over all active lanes of Wavefront
using llvm.cttz and performs the following steps:
1. Read the value that needs to be atomically incremented using
llvm.amdgcn.readlane intrinsic
2. Accumulate the result.
3. Update the scan result using llvm.amdgcn.writelane intrinsic
if intermediate scan results are needed later in the kernel.
Reviewed By: arsenm, cdevadas
Differential Revision: https://reviews.llvm.org/D147408
In order to enable the LLVM frontend to better analyze buffer
operations (and to potentially enable more precise analyses on the
backend), define versions of the raw and structured buffer intrinsics
that use `ptr addrspace(8)` instead of `<4 x i32>` to represent their
rsrc arguments.
The new intrinsics are named by replacing `buffer.` with `buffer.ptr`.
One advantage to these intrinsic definitions is that, instead of
specifying that a buffer load/store will read/write some memory, we
can indicate that the memory read or written will be based on the
pointer argument. This means that, for example, a read from a
`noalias` buffer can be pulled out of a loop that is modifying a
distinct buffer.
In the future, we will define custom PseudoSourceValues that will
allow us to package up the (buffer, index, offset) triples that buffer
intrinsics contain and allow for more precise backend analysis.
This work also enables creating address space 7, which represents
manipulation of raw buffers using native LLVM load and store
instructions.
Where tests simply used a buffer intrinsic while testing some other
code path (such as the tests for VGPR spills), they have been updated
to use the new intrinsic form. Tests that are "about" buffer
intrinsics (for instance, those that ensure that they codegen as
expected) have been duplicated, either within existing files or into
new ones.
Depends on D145441
Reviewed By: arsenm, #amdgpu
Differential Revision: https://reviews.llvm.org/D147547
Ignorable operands don't impact instruction's behavior, we can safely do CSE on
the instruction.
It is split from D130919. It has big impact to some AMDGPU test cases.
For example in atomic_optimizations_raw_buffer.ll, when trying to check if the
following instruction can be CSEed
%37:vgpr_32 = V_MOV_B32_e32 0, implicit $exec
Function isCallerPreservedOrConstPhysReg is called on operand "implicit $exec",
this function is implemented as
- return TRI.isCallerPreservedPhysReg(Reg, MF) ||
+ return TRI.isCallerPreservedPhysReg(Reg, MF) || TII.isIgnorableUse(MO) ||
(MRI.reservedRegsFrozen() && MRI.isConstantPhysReg(Reg));
Both TRI.isCallerPreservedPhysReg and MRI.isConstantPhysReg return false on this
operand, so isCallerPreservedOrConstPhysReg is also false, it causes LLVM failed
to CSE this instruction.
With this patch TII.isIgnorableUse returns true for the operand $exec, so
isCallerPreservedOrConstPhysReg also returns true, it causes this instruction to
be CSEed with previous instruction
%14:vgpr_32 = V_MOV_B32_e32 0, implicit $exec
So I got different result from here. AMDGPU's implementation of isIgnorableUse
is
bool SIInstrInfo::isIgnorableUse(const MachineOperand &MO) const {
// Any implicit use of exec by VALU is not a real register read.
return MO.getReg() == AMDGPU::EXEC && MO.isImplicit() &&
isVALU(*MO.getParent()) && !resultDependsOnExec(*MO.getParent());
}
Since the operand $exec is not a real register read, my understanding is it's
reasonable to do CSE on such instructions.
Because more instructions are CSEed, so I get less instructions generated for
these tests.
Differential Revision: https://reviews.llvm.org/D137222
Add GFX11 test coverage to a bunch of tests where it was easy to do so,
mostly because the checks are autogenerated and/or GFX11 can share the
same checks as GFX10.
Differential Revision: https://reviews.llvm.org/D129295
Pre gfx1030 null for sdst is different.
c97436f8b6e2 [AMDGPU] Use null for dead sdst operand - requires a change to make
it not apply to pre gfx1030
Differential Revision: https://reviews.llvm.org/D127869
Nic Curtis done the experiments to prove it is faster than a
separate mul and add.
Fixes: SWDEV-332806
Differential Revision: https://reviews.llvm.org/D127253
Prefer to keep uniform (non-divergent) multiplies on the scalar ALU when
possible. This significantly improves some game cases by eliminating
v_readfirstlane instructions when the result feeds into a scalar
operation, like the address calculation for a scalar load or store.
Since isDivergent is only an approximation of whether a value is in
SGPRs, it can potentially regress some situations where a uniform value
ends up in a VGPR. These should be rare in real code, although the test
changes do contain a number of examples.
Most of the test changes are just using s_mul instead of v_mul/mad which
is generally better for both register pressure and latency (at least on
GFX10 where sgpr pressure doesn't affect occupancy and vector ALU
instructions have significantly longer latency than scalar ALU). Some
R600 tests now use MULLO_INT instead of MUL_UINT24.
GlobalISel appears to handle more scenarios in the desirable way,
although it can also be thrown off and fails to select the 24-bit
multiplies in some cases.
Alternative solution considered and rejected was to allow selecting
MUL_[UI]24 to S_MUL_I32. I've rejected this because the definition of
those SD operations works is don't-care on the most significant 8 bits,
and this fact is used in some combines via SimplifyDemandedBits.
Based on a patch by Nicolai Hähnle.
Differential Revision: https://reviews.llvm.org/D97063
Exec mask manipulation inserted by SIWholeQuadMode barriers to
instruction scheduling. Move the entire pass after the machine
instruction scheduler and make changes so pass is correct for
non-SSA operation. These changes should leave the pass still
usable pre-scheduler, although tests have be updated to reflect
post-scheduler results.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D88081
Add a new llvm.amdgcn.ballot intrinsic modeled on the ballot function
in GLSL and other shader languages. It returns a bitfield containing the
result of its boolean argument in all active lanes, and zero in all
inactive lanes.
This is intended to replace the existing llvm.amdgcn.icmp and
llvm.amdgcn.fcmp intrinsics after a suitable transition period.
Use the new intrinsic in the atomic optimizer pass.
Differential Revision: https://reviews.llvm.org/D65088
Summary:
Add support for gfx10, where all DPP operations are confined to work
within a single row of 16 lanes, and wave32.
Reviewers: arsenm, sheredom, critson, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, t-tye, hiraditya, jfb, dstuttard, tpr, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65644
llvm-svn: 369745
Summary:
r363675 changed the exec modification helper function, now called
execMayBeModifiedBeforeUse, so that if no UseMI is specified it checks
all instructions in the basic block, even beyond the last use. That
meant that the DPP combiner no longer worked in any basic block that
ended with a control flow instruction, and in particular it didn't work
on code sequences generated by the atomic optimizer.
Fix it by reinstating the old behaviour but in a new helper function
execMayBeModifiedBeforeAnyUse, and limiting the number of instructions
scanned.
Reviewers: arsenm, vpykhtin
Subscribers: kzhuravl, nemanjai, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kbarton, MaskRay, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64393
llvm-svn: 365910
This change incorporates an effort by Connor Abbot to change how we deal
with WWM operations potentially trashing valid values in inactive lanes.
Previously, the SIFixWWMLiveness pass would work out which registers
were being trashed within WWM regions, and ensure that the register
allocator did not have any values it was depending on resident in those
registers if the WWM section would trash them. This worked perfectly
well, but would cause sometimes severe register pressure when the WWM
section resided before divergent control flow (or at least that is where
I mostly observed it).
This fix instead runs through the WWM sections and pre allocates some
registers for WWM. It then reserves these registers so that the register
allocator cannot use them. This results in a significant register
saving on some WWM shaders I'm working with (130 -> 104 VGPRs, with just
this change!).
Differential Revision: https://reviews.llvm.org/D59295
llvm-svn: 357400
