The test was relying on the json module getting imported transitively by
one of its imported modules. Make this less brittle by importing it
explicitly.
We used to make a dynamic value that "pretended to be its parent"
but that's hard for some of the more complex ValueObject types, and
it's better in this case just to return no dynamic value.
Differential Revision: https://reviews.llvm.org/D145629
This was failing with versions of clang that didn't support the
dsymutil (D143458) and llvm (D143397) changes that are needed for this test.
Remove unused parameters that we tried passing for the `dwarf` variant, which
is an NFC change. LLDB doesn't yet support `-gdwarf-5` debugging yet so
passing it to the `Makefile` would actually cause the test to fail.
Introduce a new object and symbol file format with the goal of mapping
addresses to symbol names. I'd like to think of is as an extremely
simple textual symtab. The file format consists of a triple, a UUID and
a list of symbols. JSON is used for the encoding, but that's mostly an
implementation detail. The goal of the format was to be simple and human
readable.
The new file format is motivated by two use cases:
- Stripped binaries: when a binary is stripped, you lose the ability to
do thing like setting symbolic breakpoints. You can keep the
unstripped binary around, but if all you need is the stripped
symbols then that's a lot of overhead. Instead, we could save the
stripped symbols to a file and load them in the debugger when
needed. I want to extend llvm-strip to have a mode where it emits
this new file format.
- Interactive crashlogs: with interactive crashlogs, if we don't have
the binary or the dSYM for a particular module, we currently show an
unnamed symbol for those frames. This is a regression compared to the
textual format, that has these frames pre-symbolicated. Given that
this information is available in the JSON crashlog, we need a way to
tell LLDB about it. With the new symbol file format, we can easily
synthesize a symbol file for each of those modules and load them to
symbolicate those frames.
Here's an example of the file format:
{
"triple": "arm64-apple-macosx13.0.0",
"uuid": "36D0CCE7-8ED2-3CA3-96B0-48C1764DA908",
"symbols": [
{
"name": "main",
"type": "code",
"size": 32,
"address": 4294983568
},
{
"name": "foo",
"type": "code",
"size": 8,
"address": 4294983560
}
]
}
Differential revision: https://reviews.llvm.org/D145180
Fix logic for repeat commands, so that regex commands (specificially `bt`) are
given the opportunity to provide a repeat command.
rdar://104562616
Differential Revision: https://reviews.llvm.org/D143695
The `v` (`frame variable`) command can directly access ivars/fields of `this` or `self`.
Such as `v field`, instead of `v this->field`. This change relaxes the criteria for
finding `this`/`self` variables.
There are cases where a `this`/`self` variable does exist, but up to now the `v` command
has not made use of it. The user would have to explicitly run `v this->field` or
`self->_ivar` to access ivars. This change allows such cases to also work (without
explicitly dereferencing `this`/`self`).
A very common example in Objective-C (and Swift) is weakly capturing `self`:
```
__weak Type *weakSelf = self;
void (^block)(void) = ^{
Type *self = weakSelf; // Re-establish strong reference.
// `v _ivar` should work just as well as `v self->_ivar`.
};
```
In this case, `self` exists but `v` would not have used it. With this change, the fact
that a variable named `self` exists is enough for it to be used.
Differential Revision: https://reviews.llvm.org/D145276
Adding a new SBDebugger::SetDestroyCallback() API.
This API can be used by any client to query for statistics/metrics before
exiting debug sessions.
Differential Revision: https://reviews.llvm.org/D143520
With this patch member-function pointers are formatted using
`CXXFunctionPointerSummaryProvider`.
This turns,
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) ::pointer_to_member_func = 0x00000000000000000000000100003f94
```
into
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) ::pointer_to_member_func = 0x00000000000000000000000100003f94 (a.out`Foo::member_func() at main.cpp:3)
```
Differential Revision: https://reviews.llvm.org/D145242
Before this patch, LLDB used to format pointers to members, such as,
```
void (Foo::*pointer_to_member_func)() = &Foo::member_func;
```
as `eFormatBytes`. E.g.,
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) $1 = 94 3f 00 00 01 00 00 00 00 00 00 00 00 00 00 00
```
This patch makes sure we format pointers to member functions the same
way we do regular function pointers.
After this patch we format member pointers as:
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) ::pointer_to_member_func = 0x00000000000000000000000100003f94
```
Differential Revision: https://reviews.llvm.org/D145241
This patch adds a test for formatting of member function pointers.
This was split from https://reviews.llvm.org/D145242, which caused
this test case to fail on Windows buildbots.
I split this out in order to make sure that this indeed works on Windows
without the D145242 patch.
Differential Revision: https://reviews.llvm.org/D145487
Reverting because Xcode requires this to be handled elsewhere.
The global variable list gets constructed using the SBAPI
This reverts commit de10c1a824405833a0f49b22e7fa3f32a1393cc3.
This patch is a proof of concept that shows how a scripted process could
be used with real process to perform interactive debugging.
In this example, we run a process that spawns 10 threads. Then, we
create a intermediary scripted process who's job will be to wrap the
real process while intercepting it's process events and dispatching them
back either to the real process or to other child scripted processes.
In this example, we have 2 child scripted processes, with even and odd
thread indices. The goal is to be able to do thread filtering and
explore the various interactive debugging approaches, by letting a child
process running when stopping the other process and inspecting it.
Another approach would be to have the child processes execution in-sync
to force running every child process when one of them starts running.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Add basic tests for `frame variable`'s ability to direct access fields of `this` and
ivars of `self`.
This splits the tests, preventing ObjC tests from running on Linux.
Differential Revision: https://reviews.llvm.org/D145348
Add basic tests for `frame variable`'s ability to direct access fields of `this` and
ivars of `self`.
Differential Revision: https://reviews.llvm.org/D145348
When using SBProcess::GetScriptedImplementation in python, if the
process has a valid implementation, we returned a reference of the
object without incrementing the reference counting. That causes the
interpreter to crash after accessing the reference several times.
This patch address this by incrementing the reference count when passing
the valid object reference.
Differential Revision: https://reviews.llvm.org/D145260
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds memory writing capabilities to the Scripted Process plugin.
This allows to user to get a target address and a memory buffer on the
python scripted process implementation that the user can make processing
on before performing the actual write.
This will also be used to write trap instruction to a real process
memory to set a breakpoint.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
The goal of the simple patch is to clean-up the scripted process
interface by removing methods that were introduced with the interface
originally, but that were never really implemented (get_thread_with_id &
get_registers_for_thread).
This patch also changes `get_memory_region_containing_address` to have a
base implementation (that retunrs `None`), instead of forcing the user
to override it in their derived class.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds process attach capabilities to the ScriptedProcess
plugin. This doesn't really expects a PID or process name, since the
process state is already script, however, this allows to create a
scripted process without requiring to have an executuble in the target.
In order to do so, this patch also turns the scripted process related
getters and setters from the `ProcessLaunchInfo` and
`ProcessAttachInfo` classes to a `ScriptedMetadata` instance and moves
it in the `ProcessInfo` class, so it can be accessed interchangeably.
This also adds the necessary SWIG wrappers to convert the internal
`Process{Attach,Launch}InfoSP` into a `SB{Attach,Launch}Info` to pass it
as argument the scripted process python implementation and convert it
back to the internal representation.
rdar://104577406
Differential Revision: https://reviews.llvm.org/D143104
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch tries to address an interoperability issue when writing
python string into the process memory.
Since the python string is not null-terminated, it would still be
written to memory however, when trying to read it again with
`SBProcess::ReadCStringFromMemory`, the memory read would fail, since
the read string doens't contain a null-terminator, and therefore is not
a valid C string.
To address that, this patch extends the `SBProcess` SWIG interface to
expose a new `WriteMemoryAsCString` method that is only exposed to the
SWIG target language. That method checks that the buffer to write is
null-terminated and otherwise, it appends a null byte at the end of it.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
With this patch member-function pointers are formatted using
`CXXFunctionPointerSummaryProvider`.
This turns,
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) ::pointer_to_member_func = 0x00000000000000000000000100003f94
```
into
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) ::pointer_to_member_func = 0x00000000000000000000000100003f94 (a.out`Foo::member_func() at main.cpp:3)
```
Differential Revision: https://reviews.llvm.org/D145242
Before this patch, LLDB used to format pointers to members, such as,
```
void (Foo::*pointer_to_member_func)() = &Foo::member_func;
```
as `eFormatBytes`. E.g.,
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) $1 = 94 3f 00 00 01 00 00 00 00 00 00 00 00 00 00 00
```
This patch makes sure we format pointers to member functions the same
way we do regular function pointers.
After this patch we format member pointers as:
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) ::pointer_to_member_func = 0x00000000000000000000000100003f94
```
Differential Revision: https://reviews.llvm.org/D145241
Revert while I investigate two CI bot failures;
the more important is the lldb-arm-ubuntu where
the FixAddress is removing the 0th bit so we're
adding the `actual=` decorator on a string pointer,
```
Got output:
(char *) strptr = 0x00400817 (actual=0x400816) ptr = [{ },{H}]
```
in TestDataFormatterSmartArray.py line 229.
This reverts commit 4d635be2dbadc77522eddc9668697385a3b9f8b4.
On target where metadata is stored in bits that aren't used for
virtual addressing -- AArch64 Top Byte Ignore and pointer authentication
are two examples -- an SBValue object representing a pointer will
return the address with metadata for SBValue::GetValueAsUnsigned.
Users may want to get the virtual address without the metadata;
this new method gives them a way to do this.
Differential Revision: https://reviews.llvm.org/D142792
This patch adds the following methods:
* `GetType()`
* `GetWatchValueKind()`
* `GetWatchSpec()`
* `IsWatchingReads()`
* `IsWatchingWrites()`
These mostly expose methods that `lldb_private::Watchpoint` already
had. Tests are included that exercise these new methods.
The motivation for exposing these are as follows:
* `GetType()` - With this information and the address from a watchpoint
it is now possible to construct an SBValue from an SBWatchpoint.
Previously this wasn't possible. The included test case illustrates
doing this.
* `GetWatchValueKind()` - This allows the caller to determine whether the
watchpoint is a variable watchpoint or an expression watchpoint. A new
enum (`WatchpointValueKind`) has been introduced to represent the
return values. Unfortunately the name `WatchpointKind` was already
taken.
* `GetWatchSpec()` - This allows (at least for variable watchpoints)
to use a sensible name for SBValues created from an SBWatchpoint.
* `IsWatchingReads()` - This allow checking if a watchpoint is
monitoring read accesses.
* `IsWatchingWRites()` - This allow checking if a watchpoint is
monitoring write accesses.
rdar://105606978
Reviewers: jingham, mib, bulbazord, jasonmolenda, JDevlieghere
Differential Revision: https://reviews.llvm.org/D144937
initial stop. The code was using PrivateResume when it should have
used Resume.
This was allowing expression evaluation while the target was running,
and though that was caught a litle later on, we should never have gotten
that far. To make sure that this is caught immediately I made an error
SBValue when this happens, and test that we get this error.
Differential Revision: https://reviews.llvm.org/D144665
The latter only checks built-in commands. I also added some docs to
make the distinction clear and a test.
Differential Revision: https://reviews.llvm.org/D144929
In order to run a {break,watch}point command, lldb can resolve to the
script interpreter to run an arbitrary piece of code or call into a
user-provided function. To do so, we will generate a wrapping function,
where we first copy lldb's internal dictionary keys into the
interpreter's global dictionary, copied inline the user code before
resetting the global dictionary to its previous state.
However, {break,watch}point commands can optionally return a value that
would tell lldb whether we should stop or not. This feature was
only implemented for breakpoint commands and since we inlined the user
code directly into the wrapping function, introducing an early return,
that caused lldb to let the interpreter global dictionary tinted with the
internal dictionary keys.
This patch fixes that issue while also adding the stopping behaviour to
watchpoint commands.
To do so, this patch refactors the {break,watch}point command creation
method, to let the lldb wrapper function generator know if the user code is
a function call or a arbitrary expression.
Then the wrapper generator, if the user input was a function call, the
wrapper function will call the user function and save the return value into
a variable. If the user input was an arbitrary expression, the wrapper will
inline it into a nested function, call the nested function and save the
return value into the same variable. After resetting the interpreter global
dictionary to its previous state, the generated wrapper function will return
the varible containing the return value.
rdar://105461140
Differential Revision: https://reviews.llvm.org/D144688
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This has been flaky on the Windows on Arm LLDB bot.
https://lab.llvm.org/buildbot/#/builders/219/builds/826
Given that test_stop_reply_reports_multiple_threads is already expected
to fail on Windows, this is not suprising.
This reverts commit 37eb9d13f891f7656f811516e765b929b169afe0.
Test failures have been fixed:
- ubsan failure fixed by 72eac42f21c0f45a27f3eaaff9364cbb5189b9e4
- warn-unsafe-buffer-usage-fixits-local-var-span.cpp fixed by
03cc52dfd1dbb4a59b479da55e87838fb93d2067 (wasn't related)
- test-output-format.ll failure was spurious, build failed at
https://lab.llvm.org/buildbot/#/builders/54/builds/3545 (b4431b2d945b6fc19b1a55ac6ce969a8e06e1e93)
but passed at
https://lab.llvm.org/buildbot/#/builders/54/builds/3546 (5ae99be0377248c74346096dc475af254a3fc799)
which is before my revert
b4431b2d94...5ae99be037
Original commit message:
Depends on https://reviews.llvm.org/D142861.
Alternative to https://reviews.llvm.org/D137601.
xxHash is much faster than djbHash. This makes a simple Rust test case with a large constant string 10% faster to compile.
Previous attempts at changing this hash function (e.g. https://reviews.llvm.org/D97396) had to be reverted due to breaking tests that depended on iteration order.
No additional tests fail with this patch compared to `main` when running `check-all` with `-DLLVM_ENABLE_PROJECTS="all"` (on a Linux host), so I hope I found everything that needs to be changed.
Differential Revision: https://reviews.llvm.org/D142862
