This reverts commit 27c4e233104ba765cd986b3f8b0dcd3a6c3a9f89.
I think I made a mistake with the use in RemoveConditionFromAssume(),
because the instruction being changed is not the current one, but
the next assume. Revert the change for now.
Same as with other replacement methods, it's generally necessary
to report a change on the instruction itself, e.g. by returning
it from the visit method (or possibly explicitly adding it to the
worklist).
Return Instruction * from replaceUse() to encourage the usual
"return replaceXYZ" pattern.
These idioms already appear a number of places in code, and upcoming changes to the various sanitizers continue to need more instances of the same patterns.
Differential Revision: https://reviews.llvm.org/D145945
Before this change, we call getUnderlyingObject on each separate_storage
operand on every alias() call (potentially requiring lots of pointer
chasing). Instead, we rewrite the assumptions in instcombine to do this
pointer-chasing once.
We still leave the getUnderlyingObject calls in alias(), just expecting
them to be no-ops much of the time. This is relatively fast (just a
couple dyn_casts with no pointer chasing) and avoids making alias
analysis results depend on whether or not instcombine has been run.
Differential Revision: https://reviews.llvm.org/D144933
is.fpclass(x, qnan|snan) -> fcmp uno x, 0.0
is.fpclass(nnan x, qnan|snan|other) -> is.fpclass(x, other)
Start porting the existing combines from llvm.amdgcn.class to the
generic intrinsic. Start with the ones which aren't dependent on the
FP mode.
This makes folding to 0/1 later on easier and regardless `icmp ne` is
'probably' faster on most targets (especially for vectors).
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D142253
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
value() has undesired exception checking semantics and calls
__throw_bad_optional_access in libc++. Moreover, the API is unavailable without
_LIBCPP_NO_EXCEPTIONS on older Mach-O platforms (see
_LIBCPP_AVAILABILITY_BAD_OPTIONAL_ACCESS).
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
The Assignment Tracking debug-info feature is outlined in this RFC:
https://discourse.llvm.org/t/
rfc-assignment-tracking-a-better-way-of-specifying-variable-locations-in-ir
Most of the updates here are just to ensure DIAssignID attachments are
maintained and propagated correctly.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D133307
The pointsToConstantMemory() method returns true only if the memory pointed to
by the memory location is globally invariant. However, the LLVM memory model
also has the semantic notion of *locally-invariant*: memory that is known to be
invariant for the life of the SSA value representing that pointer. The most
common example of this is a pointer argument that is marked readonly noalias,
which the Rust compiler frequently emits.
It'd be desirable for LLVM to treat locally-invariant memory the same way as
globally-invariant memory when it's safe to do so. This patch implements that,
by introducing the concept of a *ModRefInfo mask*. A ModRefInfo mask is a bound
on the Mod/Ref behavior of an instruction that writes to a memory location,
based on the knowledge that the memory is globally-constant memory (in which
case the mask is NoModRef) or locally-constant memory (in which case the mask
is Ref). ModRefInfo values for an instruction can be combined with the
ModRefInfo mask by simply using the & operator. Where appropriate, this patch
has modified uses of pointsToConstantMemory() to instead examine the mask.
The most notable optimization change I noticed with this patch is that now
redundant loads from readonly noalias pointers can be eliminated across calls,
even when the pointer is captured. Internally, before this patch,
AliasAnalysis was assigning Ref to reads from constant memory; now AA can
assign NoModRef, which is a tighter bound.
Differential Revision: https://reviews.llvm.org/D136659
(sign|resign) + (auth|resign) can be folded by omitting the middle
sign+auth component if the key and discriminator match.
Differential Revision: https://reviews.llvm.org/D132383
This is a test to verify that we do not crash with the
problem noted in issue #57986. The root problem should
be fixed with a prior change to InstSimplify.
If one of the operands in a matrix multiplication is negated we can optimise the equation by moving the negation to the smallest element of the operands or the result.
Reviewed By: spatel, fhahn
Differential Revision: https://reviews.llvm.org/D133300
This reverts commit c911befaec494c52a63e3b957e28d449262656fb.
It has broken LLDB Arm/AArch64 Linux buildbots. I dont really understand
the underlying reason. Reverting for now make buildbot green.
https://reviews.llvm.org/D133036
Transforms occasionally want to insert an instruction directly
after the definition point of a value. This involves quite a few
different edge cases, e.g. for phi nodes the next insertion point
is not the next instruction, and for invokes and callbrs its not
even in the same block. Additionally, the insertion point may not
exist at all if catchswitch is involved.
This adds a general Instruction::getInsertionPointAfterDef() API to
implement the necessary logic. For now it is used in two places
where this should be mostly NFC. I will follow up with additional
uses where this fixes specific bugs in the existing implementations.
Differential Revision: https://reviews.llvm.org/D129660
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Relands 67504c95494ff05be2a613129110c9bcf17f6c13 with a fix for
32-bit builds.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
