Add a comment explaining how we lay out stack frames for ARM targets,
based on the existing one for AArch64. Also expand the comment to
explain reserved call frames for both architectures.
Differential revision: https://reviews.llvm.org/D98258
llvm-objdump only uses one MCInstrAnalysis object, so if ARM and Thumb
code is mixed in one object, or if an object is disassembled without
explicitly setting the triple to match the ISA used, then branch and
call targets will be printed incorrectly.
This could be fixed by creating two MCInstrAnalysis objects in
llvm-objdump, like we currently do for SubtargetInfo. However, I don't
think there's any reason we need two separate sub-classes of
MCInstrAnalysis, so instead these can be merged into one, and the ISA
determined by checking the opcode of the instruction.
Differential revision: https://reviews.llvm.org/D97766
This adds some simple known bits handling for the three CSINC/NEG/INV
instructions. From the operands known bits we can compute the common
bits of the first operand and incremented/negated/inverted second
operand. The first, especially CSINC ZR, ZR, comes up fair amount in the
tests. The others are more rare so a unit test for them is added.
Differential Revision: https://reviews.llvm.org/D97788
In some rare circumstances we can be using an undef register for a
compare. When folded into a CBZ/CBNZ the undef flags are lost, leading
to machine verifier problems. This propagates the existing flags to the
new instruction.
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
Instead of converting the 0 into a ZR reg during lowering, do that with
tablegen by matching the zero immediate. This when combined with other
optimizations is more likely to use ZR and helps keep the DAG more
easily optimizable. It should not otherwise effect code generation.
Currently ARM backend validates the range of branch targets before the
layout of fragments is finalized. This causes build failure if symbolic
expressions are used, with the exception of a single symbolic value.
For example, "b.w ." works but "b.w . + 2" currently fails to
assemble. This fixes the issue by delaying this check (in
ARMAsmParser::validateInstruction) of b.w instructions until the symbol
expressions are resolved (in ARMAsmBackend::adjustFixupValue).
Link:
https://github.com/ClangBuiltLinux/linux/issues/1286
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D97568
I copied the nearly identical function from AArch64 into AMDGPU, so
fix this duplication.
Mips and X86 have their own more exotic versions which should be
removed. However replacing those is better left for a separate patch
since it requires other changes to avoid regressions.
If we insert undef using a VMOVN, we can just use the original value in
three out of the four possible combinations. Using VMOVT into a undef
vector will still require the lanes to be moved, but otherwise the
non-undef value can be used.
Make sure to set the bottom bit of the symbol even when the type
attribute of a label is set after the label.
GNU as sets the thumb state according to the thumb state of the label.
If a .type directive is placed after the label, set the symbol's thumb
state according to the thumb state of the .type directive. This matches
GNU as in most cases.
From: Stefan Agner <stefan@agner.ch>
This fixes:
https://bugs.llvm.org/show_bug.cgi?id=44860https://github.com/ClangBuiltLinux/linux/issues/866
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D74927
F1.2 Standard assembler syntax fields
describes .w and .n suffixes for wide and narrow encodings.
arch/arm/probes/kprobes/test-thumb.c tests installing kprobes for
certain instructions using inline asm. There's a few instructions we
fail to assemble due to missing .w t2InstAliases.
Adds .w suffixes for:
* bl (F5.1.25 BL, BLX (immediate) T1)
* dbg (F5.1.42 DBG T1)
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D97236
Currently the load/store optimizer will only fold in increments of the
same size as the load/store. This patch expands that to any legal
immediate for the post-inc instruction.
This is a recommit of 3b34b06fc5908b with correctness fixes and extra
tests.
Differential Revision: https://reviews.llvm.org/D95885
The Linux kernel when built with CONFIG_THUMB2_KERNEL makes use of these
instructions with immediate operands and wide encodings.
These are the T4 variants of the follow sections from the Arm ARM.
F5.1.72 LDR (immediate)
F5.1.229 STR (immediate)
I wasn't able to represent these simple aliases using t2InstAlias due to
the Constraints on the non-suffixed existing instructions, which results
in some manual parsing logic needing to be added.
F1.2 Standard assembler syntax fields
describes the use of the .w (wide) vs .n (narrow) encoding suffix.
Link: https://bugs.llvm.org/show_bug.cgi?id=49118
Link: https://github.com/ClangBuiltLinux/linux/issues/1296
Reported-by: Stefan Agner <stefan@agner.ch>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D96632
Early versions of the ARMv7 reference manuals considered the sp register
as a deprecated register for ldm/stm familiy of instructions. However,
later versions such as ARM DDI 0406C.d added a note to the Appendix:
D9.3 Use of the SP as a general-purpose register
Most ARM instructions, unlike Thumb instructions, provide exactly the
same access to the SP as to R0-R12. This means that it is possible to
use the SP as a general-purpose register. Earlier issues of this manual
deprecated the use of SP in an ARM instruction, in any way that is
deprecated, not permitted, or not possible in the corresponding
Thumb instruction. However, user feedback indicates a number of cases
where these instructions are useful. Therefore, ARM no longer deprecates
these instruction uses.
Also Armv8 manuals no longer consider SP as deprecated register for ldm/
stm A32 instructions.
Furthermore, GNU as also does not print a deprecated warning when using
SP with those instructions.
Drop deprecation warning for pop/ldm/push/stm instructions.
Patch by: Stefan Agner.
Differential Revision: https://reviews.llvm.org/D82692
As a followup to D95291, getOperandsScalarizationOverhead was still
using a VF as a vector factor if the arguments were scalar, and would
assert on certain matrix intrinsics with differently sized vector
arguments. This patch removes the VF arg, instead passing the Types
through directly. This should allow it to more accurately compute the
cost without having to guess at which operands will be vectorized,
something difficult with more complex intrinsics.
This adjusts one SVE test as it is now calling the wrong intrinsic vs
veccall. Without invalid InstructCosts the cost of the scalarized
intrinsic is too low. This should get fixed when the cost of
scalarization is accounted for with scalable types.
Differential Revision: https://reviews.llvm.org/D96287
getIntrinsicInstrCost takes a IntrinsicCostAttributes holding various
parameters of the intrinsic being costed. It can either be called with a
scalar intrinsic (RetTy==Scalar, VF==1), with a vector instruction
(RetTy==Vector, VF==1) or from the vectorizer with a scalar type and
vector width (RetTy==Scalar, VF>1). A RetTy==Vector, VF>1 is considered
an error. Both of the vector modes are expected to be treated the same,
but because this is confusing many backends end up getting it wrong.
Instead of trying work with those two values separately this removes the
VF parameter, widening the RetTy/ArgTys by VF used called from the
vectorizer. This keeps things simpler, but does require some other
modifications to keep things consistent.
Most backends look like this will be an improvement (or were not using
getIntrinsicInstrCost). AMDGPU needed the most changes to keep the code
from c230965ccf36af5c88c working. ARM removed the fix in
dfac521da1b90db683, webassembly happens to get a fixup for an SLP cost
issue and both X86 and AArch64 seem to now be using better costs from
the vectorizer.
Differential Revision: https://reviews.llvm.org/D95291
This removes the existing patterns for inserting two lanes into an
f16/i16 vector register using VINS, instead using a DAG combine to
pattern match the same code sequences. The tablegen patterns were
already on the large side (foreach LANE = [0, 2, 4, 6]) and were not
handling all the cases they could. Moving that to a DAG combine, whilst
not less code, allows us to better control and expand the selection of
VINSs. Additionally this allows us to remove the AddedComplexity on
VCVTT.
The extra trick that this has learned in the process is to move two
adjacent lanes using a single f32 vmov, allowing some extra
inefficiencies to be removed.
Differenial Revision: https://reviews.llvm.org/D96876
This patch provides two major changes:
1. Add getRelocationInfo to check if a constant will have static, dynamic, or
no relocations. (Also rename the original needsRelocation to needsDynamicRelocation.)
2. Only allow a constant with no relocations (static or dynamic) to be placed
in a mergeable section.
This will allow unused symbols that contain static relocations and happen to
fit in mergeable constant sections (.rodata.cstN) to instead be placed in
unique-named sections if -fdata-sections is used and subsequently garbage collected
by --gc-sections.
See https://lists.llvm.org/pipermail/llvm-dev/2021-February/148281.html.
Differential Revision: https://reviews.llvm.org/D95960
Currently the load/store optimizer will only fold in increments of the
same size as the load/store. This patch expands that to any legal
immediate for the post-inc instruction.
Differential Revision: https://reviews.llvm.org/D95885
It appears that pointer types were causing issues for the min/max cost
code in getIntrinsicInstrCost. This makes sure that when matching
icmp/select to a min/max, we only do that for normal int or float types.
A v8i32 compare will produce a v8i1 predicate, but during codegen the
v8i32 will be split into two v4i32, potentially requiring two v4i1
predicates to be merged into a single v8i1. Because this merging of two
v4i1's into a v8i1 is very expensive, we need to make the cost of the
compare equally high.
This patch adds the cost of that to ARMTTIImpl::getCmpSelInstrCost.
Because we don't know whether the user of the predicate can be split,
and the cost model is mostly pre-instruction, we may be pessimistic but
that should only be for larger and legal types. This also adds min/max
detection to the costmodel where it can be detected, to keep those in
line with the cost of simple min/max instructions. Otherwise for the
most part, costs that were already expensive have become more expensive.
Differential Revision: https://reviews.llvm.org/D96692
This change introduces support for zero flag ELF section groups to LLVM.
LLVM already supports COMDAT sections, which in ELF are a special type
of ELF section groups. These are generally useful to enable linker GC
where you want a group of sections to always travel together, that is to
be either retained or discarded as a whole, but without the COMDAT
semantics. Other ELF assemblers already support zero flag ELF section
groups and this change helps us reach feature parity.
Differential Revision: https://reviews.llvm.org/D95851
From what I can tell, a writeback is unpredictable with LR for both
loads and stores. This changes the operand from a gprnopc to a rGPR in
both cases (which I believe is essentially a NFC due to the tied-def
already being a rGPR.)
Differential Revision: https://reviews.llvm.org/D96723
This adds basic MVE costs for SMIN/SMAX/UMIN/UMAX, as well as MINNUM and
MAXNUM representing fmin and fmax. It tightens up the costs, not using a
ICmp+Select cost.
Differential Revision: https://reviews.llvm.org/D96603
Currently the findIncDecAfter will only look at the next instruction for
post-inc candidates in the load/store optimizer. This extends that to a
search through the current BB, until an instruction that modifies or
uses the increment reg is found. This allows more post-inc load/stores
and ldm/stm's to be created, especially in cases where a schedule might
move instructions further apart.
We make sure not to look any further for an SP, as that might invalidate
stack slots that are still in use.
Differential Revision: https://reviews.llvm.org/D95881
This refactors shouldFavorPostInc() and shouldFavorBackedgeIndex() into
getPreferredAddressingMode() so that we have one interface to steer LSR in
generating the preferred addressing mode.
Differential Revision: https://reviews.llvm.org/D96600
In the future Windows will enable Control-flow Enforcement Technology (CET aka shadow stacks). To protect the path where the context is updated during exception handling, the binary is required to enumerate valid unwind entrypoints in a dedicated section which is validated when the context is being set during exception handling.
This change allows llvm to generate the section that contains the appropriate symbol references in the form expected by the msvc linker.
This feature is enabled through a new module flag, ehcontguard, which was modelled on the cfguard flag.
The change includes a test that when the module flag is enabled the section is correctly generated.
The set of exception continuation information includes returns from exceptional control flow (catchret in llvm).
In order to collect catchret we:
1) Includes an additional flag on machine basic blocks to indicate that the given block is the target of a catchret operation,
2) Introduces a new machine function pass to insert and collect symbols at the start of each block, and
3) Combines these targets with the other EHCont targets that were already being collected.
Change originally authored by Daniel Frampton <dframpto@microsoft.com>
For more details, see MSVC documentation for `/guard:ehcont`
https://docs.microsoft.com/en-us/cpp/build/reference/guard-enable-eh-continuation-metadata
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D94835
Given a floating point store from an extracted vector, with an integer
VGETLANE that already exists, storing the existing VGETLANEu directly
can be better for performance. As the value is known to already be in an
integer registers, this can help reduce fp register pressure, removed
the need for the fp extract and allows use of more integer post-inc
stores not available with vstr.
This can be a bit narrow in scope, but helps with certain biquad kernels
that store shuffled vector elements.
Differential Revision: https://reviews.llvm.org/D96159
Our current lowering of VMOVNT goes via a shuffle vector of the form
<0, N, 2, N+2, 4, N+4, ..>. That can of course also be a single input
shuffle of the form <0, 0, 2, 2, 4, 4, ..>, where we use a VMOVNT to
insert a vector into the top lanes of itself. This adds lowering of that
case, re-using the existing isVMOVNMask.
Differential Revision: https://reviews.llvm.org/D96065
The vector reduction intrinsics started life as experimental ops, so backend support
was lacking. As part of promoting them to 1st-class intrinsics, however, codegen
support was added/improved:
D58015
D90247
So I think it is safe to now remove this complication from IR.
Note that we still have an IR-level codegen expansion pass for these as discussed
in D95690. Removing that is another step in simplifying the logic. Also note that
x86 was already unconditionally forming reductions in IR, so there should be no
difference for x86.
I spot checked a couple of the tests here by running them through opt+llc and did
not see any asm diffs.
If we do find functional differences for other targets, it should be possible
to (at least temporarily) restore the shuffle IR with the ExpandReductions IR
pass.
Differential Revision: https://reviews.llvm.org/D96552
This adds the CostKind to getMVEVectorCostFactor, so that it can
automatically account for CodeSize costs, where it returns a cost of 1
not the MVEFactor used for Throughput/Latency. This helps simplify the
caller code and allows us to get the codesize cost more correct in more
cases.
In the tablegen architecture definition, the Name field for the
ARMv87a record read "ARMv86a". All the other records contain their own
names.
Corrected it to "ARMv87a", and added the necessary value in
ARMArchEnum for that to refer to.
Reviewed By: pratlucas
Differential Revision: https://reviews.llvm.org/D96493
This changes which of the getScalarizationOverhead overloads is used in
the gather/scatter cost to use the base variant directly, not relying on
the version using heuristics on the number of args with no args
provided. It should still produce the same costs for scalarized
gathers/scatters.
With t2DoLoopDec we can be left with some extra MOV's in the preheaders
of tail predicated loops. This removes them, in the same way we remove
other dead variables.
Differential Revision: https://reviews.llvm.org/D91857
We were storing predicate registers, such as a <8 x i1>, in the opposite
order to how the rest of llvm expects. This actually turns out to be
correct for the one place that usually uses it - the
ScalarizeMaskedMemIntrin pass, but only because the pass was incorrect
itself. This fixes the order so that bits are stored in the opposite
order and bitcasts work as expected. This allows the Scalarization pass
to be fixed, as in https://reviews.llvm.org/D94765.
Differential Revision: https://reviews.llvm.org/D94867
This is used by the Linux kernel built with CONFIG_THUMB2_KERNEL.
Because different operands are not permitted to `movs`, the diagnostics now provide multiple suggestions along the lines of using a non-pc destination operand or lr source operand.
Forked from D95586.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D96304
This was taking the calling convention from the parent function,
instead of the callee. Avoids regressions in a future patch when the
caller and callee have different type breakdowns.
For some reason AArch64's lowerFormalArguments seems to intentionally
ignore the parent isVarArg.
This reverts commit 502a67dd7f23901834e05071ab253889f671b5d9.
This expose a failure in test-suite build on PowerPC,
revert to unblock buildbot first,
Dave will re-commit in https://reviews.llvm.org/D96287.
Thanks Dave.
A One-Off Identity mask is a shuffle that is mostly an identity mask
from as single source but contains a single element out-of-place, either
from a different vector or from another position in the same vector. As
opposed to lowering this via a ARMISD::BUILD_VECTOR we can generate an
extract/insert pair directly. Under ARM with individually accessible
lane elements this often becomes a simple lane move.
This also alters the LowerVECTOR_SHUFFLEUsingMovs code to use v4f32 (not
v4i32), a more natural type for lane moves.
Differential Revision: https://reviews.llvm.org/D95551
