Reverts llvm/llvm-project#157529
Sorry, I missed that the missed that the LLVM test was using clang -
layering dictates thats not OK. Please readjust the test case to work
like the existing test coverage (or perhaps the existing test coverage
is sufficient?) and post a new PR.
### Context
#99710 introduced `.loc_label` so we can terminate a line sequence.
However, it did not advance PC properly. This is problematic for
1-instruction functions as it will have zero-length sequence. The test
checked in that PR shows the problem:
```
# CHECK-LINE-TABLE: Address Line Column File ISA Discriminator OpIndex Flags
# CHECK-LINE-TABLE-NEXT: ------------------ ------ ------ ------ --- ------------- ------- -------------
# CHECK-LINE-TABLE-NEXT: 0x00000028: 05 DW_LNS_set_column (1)
# CHECK-LINE-TABLE-NEXT: 0x0000002a: 00 DW_LNE_set_address (0x0000000000000000)
# CHECK-LINE-TABLE-NEXT: 0x00000035: 01 DW_LNS_copy
# CHECK-LINE-TABLE-NEXT: 0x0000000000000000 1 1 1 0 0 0 is_stmt
# CHECK-LINE-TABLE-NEXT: 0x00000036: 00 DW_LNE_end_sequence
# CHECK-LINE-TABLE-NEXT: 0x0000000000000000 1 1 1 0 0 0 is_stmt end_sequence
```
Both rows having PC 0x0 is incorrect, and parsers won't be able to parse
them. See more explanation why this is wrong in #154851.
### Design
This PR attempts to fix this by advancing the PC to the next available
Label, and advance to the end of the section if no Label is available.
### Implementation
- `emitDwarfLineEndEntry` will advance PC to the `CurrLabel`
- If `CurrLabel` is null, its probably a fake LineEntry we introduced in
#110192. In that case look for the next Label
- If still not label can be found, use `null` and
`emitDwarfLineEndEntry` is smart enough to advance PC to the end of the
section
- Rename `LastLabel` to `PrevLabel`, "last" can mean "previous" or
"final", this is ambigous.
- Updated the tests to emit a correct label.
### Note
This fix should render #154986 and #154851 obsolete, they were temporary
fixes and don't resolve the root cause.
---------
Signed-off-by: Peter Rong <PeterRong@meta.com>
In review of bbde6b, I had originally proposed that we support the
legacy text format. As review evolved, it bacame clear this had been a
bad idea (too much complexity), but in order to let that patch finally
move forward, I approved the change with the variant. This change undoes
the variant, and updates all the tests to just use the array form.
A hardware loop instruction combines a subtract, compare with zero, and
branch. We currently account for the compare and branch being combined
into one in Cost::RateFormula, as part of more general handling for
compare-branch-zero, but don't account for the subtract, leading to
suboptimal decisions in some cases.
Fix this in Cost::RateRegister by noticing when we have such a subtract
and discounting the AddRecCost in such a case.
The .syntax unified directive and .codeX/.code X directives are, other
than some simple common printing code, exclusively implemented in the
targets themselves. Thus, remove the corresponding MCAF_* flags and
reimplement the directives solely within the targets. This avoids
exposing all targets to all other targets' flags.
Since MCAF_SubsectionsViaSymbols is all that remains, convert it to its
own function like other directives, simplifying its implementation.
Note that, on X86, we now always need a target streamer when parsing
assembly, as it's now used for directives that aren't COFF-specific. It
still does not however need to do anything when producing a non-COFF
object file, so this commit does not introduce any new target streamers.
There is some churn in test output, and corresponding UTC regex changes,
due to comments no longer being flushed by these various directives (and
EmitEOL is not exposed outside MCAsmStreamer.cpp so we couldn't do so
even if we wanted to), but that was a bit odd to be doing anyway.
This is motivated by Morello LLVM, which adds yet another assembler flag
to distinguish A64 and C64 instruction sets, but did not update every
switch and so emits warnings during the build. Rather than fix those
warnings it seems better to instead make the problem not exist in the
first place via this change.
As far as I understand, the first operand of dbg_declare should be a
pointer (inside a metadata wrapper). However, using a non-pointer is
currently not rejected, and we have some tests that use non-pointer
types. As far as I can tell, these tests either meant to use dbg_value
or are just incorrect hand-crafted tests.
Ran into this while trying to `fix` #134008.
These date back to when the non-intrinsic format of variable locations
was still being tested and was behind a compile-time flag, so not all
builds / bots would correctly run them. The solution at the time, to get
at least some test coverage, was to have tests opt-in to non-intrinsic
debug-info if it was built into LLVM.
Nowadays, non-intrinsic format is the default and has been on for more
than a year, there's no need for this flag to exist.
(I've downgraded the flag from "try" to explicitly requesting
non-intrinsic format in some places, so that we can deal with tests that
are explicitly about non-intrinsic format in their own commit).
llvm-mc --assemble prints an initial `.text` from `initSections`.
This is weird for quick assembly tasks that do not specify `.text`.
Omit the .text by moving section directive printing from `changeSection`
to `switchSection`. switchSectionNoPrint now correctly calls the
`changeSection` hook (needed by MachO).
The initial directives of clang -S are now reordered. On ELF targets, we
get `.file "a.c"; .text` instead of `.text; .file "a.c"`.
If there is no function, `.text` will be omitted.
As defined in LangRef, branching on `undef` is undefined behavior.
This PR aims to remove undefined behavior from tests. As UB tests break
Alive2 and may be the root cause of breaking future optimizations.
Here's an Alive2 proof for one of the examples:
https://alive2.llvm.org/ce/z/TncxhP
When emitting debug info for code alignment, it was possible to emit a
.loc directive with a file number of zero, which is invalid for DWARF 4
and earlier. This happened because getCurrentDwarfLoc() returned a
zero-initialised value when there hadn't been a previous .loc directive
emitted.
---------
Co-authored-by: Paul T Robinson <paul.robinson@sony.com>
SimplifyCFG sinking currently does not sink loads/stores of allocas,
because historically SROA was unable to handle the resulting IR. Since
then, SROA both learned to speculate loads/stores over selects and phis,
*and* SimplifyCFG sinking has been deferred to the end of the function
simplification pipeline, which means that SROA happens before it.
As such, I believe that this workaround should no longer be necessary.
Given how sensitive SimplifyCFG sinking seems to be, this patch takes a
very conservative step towards removing this, by allowing sinking if we
don't actually need to form a phi over the pointer argument.
This fixes https://github.com/llvm/llvm-project/issues/104567, where
sinking a store to an escaped alloca allows converting a switch into
arithmetic.
This patch makes the final major change of the RemoveDIs project, changing the
default IR output from debug intrinsics to debug records. This is expected to
break a large number of tests: every single one that tests for uses or
declarations of debug intrinsics and does not explicitly disable writing
records.
If this patch has broken your downstream tests (or upstream tests on a
configuration I wasn't able to run):
1. If you need to immediately unblock a build, pass
`--write-experimental-debuginfo=false` to LLVM's option processing for all
failing tests (remember to use `-mllvm` for clang/flang to forward arguments to
LLVM).
2. For most test failures, the changes are trivial and mechanical, enough that
they can be done by script; see the migration guide for a guide on how to do
this: https://llvm.org/docs/RemoveDIsDebugInfo.html#test-updates
3. If any tests fail for reasons other than FileCheck check lines that need
updating, such as assertion failures, that is most likely a real bug with this
patch and should be reported as such.
For more information, see the recent PSA:
https://discourse.llvm.org/t/psa-ir-output-changing-from-debug-intrinsics-to-debug-records/79578
Before this patch, the value of DW_AT_bit_offset, used for bitfields
before DWARF version 4, was always emitted as an unsigned integer using
the form DW_FORM_data<n>. If the value was originally a signed integer,
for instance in the case of negative offsets, it was up to debug
information consumers to re-cast it to a signed integer.
This is problematic since the burden of deciding if the value should be
read as signed or unsigned was put onto the debug info consumers: the
DWARF specification doesn't define DW_AT_bit_offset's underlying type.
If a debugger decided to interpret this attribute in the form data<n> as
unsigned, then negative offsets would be completely broken.
The DWARF specification version 3 mentions in the Data Representation
section, page 127:
> If one of the DW_FORM_data<n> forms is used to represent a signed or
unsigned integer, it can be hard for a consumer to discover the context
necessary to determine which interpretation is intended. Producers are
therefore strongly encouraged to use DW_FORM_sdata or DW_FORM_udata for
signed and unsigned integers respectively, rather than DW_FORM_data<n>.
Therefore, the proposal is to use DW_FORM_sdata, which is explicitly
signed. This is an indication to consumers that the offset must be
parsed unambiguously as a signed integer.
Finally, gcc already uses DW_FORM_sdata for negative offsets, fixing the
potential ambiguity altogether.
This patch mimics gcc's behaviour by emitting negative values of
DW_AT_bit_offset using the DW_FORM_sdata form. This eliminates any
potential misinterpretation.
One could argue that all values should use DW_FORM_sdata, but for the
sake of parity with gcc, it is safe to restrict the change to negative
values.
Fixes: https://github.com/llvm/llvm-project/issues/85254
Hardware loops inserts PHIs at the position `getFirstNonPhi()`, which is
incorrect - instead, `getFirstNonPhiIt()` is required to not insert the
PHI after any debug records that immediately follow the last existing
PHI.
Port CodeGenPrepare to new pass manager and dependency
BasicBlockSectionsProfileReader
Fixes: #75380
Co-authored-by: Krishna-13-cyber <84722531+Krishna-13-cyber@users.noreply.github.com>
The change is fairly mechanical:
1. Factor code from `FastISel::selectIntrinsicCall`, which converts
debug intrinsics into debug instructions, into functions (NFC).
2. Call those functions for DPValues attached to instructions too.
The test updates look the same as other RemoveDIs changes: re-run the
tests with `--try-experimental-debuginfo-iterators`, which checks the
output is identical using the new debug info format (if it has been
enabled in the cmake configuration).
Depends on #76941 (otherwise some modified tests spuriously fail).
Revert e0c554ad87d18dcbfcb9b6485d0da800ae1338d1 "Port CodeGenPrepare to new pass manager (and BasicBlockSectionsProfil… (#75380)"
Revert #75380 and #77054 as they were breaking EXPENSIVE_CHECKS buildbots: https://lab.llvm.org/buildbot/#/builders/104
Port CodeGenPrepare to new pass manager and dependency
BasicBlockSectionsProfileReader
Fixes: #64560
Co-authored-by: Krishna-13-cyber <84722531+Krishna-13-cyber@users.noreply.github.com>
Handle dbg.declares in SROA using DPValues.
In order to reduce duplication, the migrate-debug-info loop has been changed
to a generic lambda with some helper function overloads, which is called
for dbg.declares, dbg.assigns, and DPValues alike.
The tests will become "live" once #74090 lands (see for more info).
Split a virtual register with hint may generate COPY instructions in
multiple cold basic blocks, and increase code size. So disable this
split when the function is optimized for size.
If a virtual register is not assigned preferred physical register, it means some
COPY instructions will be changed to real register move instructions. In this
case we can try to split the virtual register in colder blocks, if success, the
original COPY instructions can be deleted, and the new COPY instructions in
colder blocks will be generated as register move instructions. It results in
fewer dynamic register move instructions executed.
The new test case split-reg-with-hint.ll gives an example, the hot path contains
24 instructions without this patch, now it is only 4 instructions with this
patch.
Differential Revision: https://reviews.llvm.org/D156491
This commit aims to improve error handling in the
DWARFAbbreviationDeclarationSet class. Specifically, we change the return type
of DWARFAbbreviationDeclarationSet::extract to an llvm::Error. In doing
so, we propagate the error from DWARFAbbreviationDeclaration::extract
another layer upward.
I have built on the previous unittest for DWARFDebugAbbrev that I
wrote a few days prior.
Namely, I am verifying that the following should give an error:
- An invalid tag following a non-null code
- An invalid attribute with a valid form
- A valid attribute with an invalid form
- An incorrectly terminated DWARFAbbreviationDeclaration
Additionally, I uncovered some invalid DWARF in an unrelated dsymutil
test. Namely the last Abbreviation Decl was missing a code.
This test has been updated accordingly. However, this commit does
not fix the underlying issue: llvm-dwarfdump does not correctly
verify the debug abbreviation section to catch these kinds of
mistakes. I have updated DWARFVerifier to not dereference a
pointer without first checking it and left a FIXME for future
contributors.
Differential Revision: https://reviews.llvm.org/D151353
This is a follow-up to b71edfaa4ec3c998aadb35255ce2f60bba2940b0
since I forgot the lit.local.cfg files in that one.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Reviewed By: barannikov88, kwk
Differential Revision: https://reviews.llvm.org/D150762
load if the load is moved due to the pre register allocation ld/st
optimization pass
The issue here is that there can be a scenario where debug information
is lost because of the pre register allocation load store optimization
pass, where a load who's result describes the debug infomation for a
local variable gets moved below the load and that causes the debug
information for that load to get lost.
Example:
Before the Pre Register Allocation Load Store Pass
inst_a
%2 = ld ...
inst_b
DBG_VALUE %2, "x", ...
%3 = ld ...
After the Pass:
inst_a
inst_b
DBG_VALUE %2, "x", ...
%2 = ld ...
%3 = ld ...
The load has now been moved to after the DBG_VAL that uses its result
and the debug info for "x" has been lost. What we want is:
inst_a
inst_b
%2 = ld ...
DBG_VALUE %2, "x", ...
%3 = ld ...
Which is what this patch addresses
Differential Revision: https://reviews.llvm.org/D145168
This reverts commit 0aaf634152f25a805563d552e72d89e8202d84f2.
Reverted this because of build failure https://lab.llvm.org/buildbot#builders/245/builds/7035
/home/tcwg-buildbot/worker/clang-armv8-quick/llvm/llvm/test/DebugInfo/Generic/incorrect-variable-debugloc1.ll:28:12: error: DWARF23: expected string not found in input
; DWARF23: DW_OP_lit13{{$}}
^
<stdin>:1:1: note: scanning from here
-: file format elf32-littlearm
^
<stdin>:19:20: note: possible intended match here
DW_AT_frame_base (DW_OP_reg13 SP)
^
load if the load is moved due to the pre register allocation ld/st
optimization pass
The issue here is that there can be a scenario where debug information
is lost because of the pre register allocation load store optimization
pass, where a load who's result describes the debug infomation for a
local variable gets moved below the load and that causes the debug
information for that load to get lost.
Example:
Before the Pre Register Allocation Load Store Pass
inst_a
%2 = ld ...
inst_b
DBG_VALUE %2, "x", ...
%3 = ld ...
After the Pass:
inst_a
inst_b
DBG_VALUE %2, "x", ...
%2 = ld ...
%3 = ld ...
The load has now been moved to after the DBG_VAL that uses its result
and the debug info for "x" has been lost. What we want is:
inst_a
inst_b
%2 = ld ...
DBG_VALUE %2, "x", ...
%3 = ld ...
Which is what this patch addresses
Differential Revision: https://reviews.llvm.org/D145168
This patch makes two notable changes to the MIR debug info representation,
which result in different MIR output but identical final DWARF output (NFC
w.r.t. the full compilation). The two changes are:
* The introduction of a new MachineOperand type, MO_DbgInstrRef, which
consists of two unsigned numbers that are used to index an instruction
and an output operand within that instruction, having a meaning
identical to first two operands of the current DBG_INSTR_REF
instruction. This operand is only used in DBG_INSTR_REF (see below).
* A change in syntax for the DBG_INSTR_REF instruction, shuffling the
operands to make it resemble DBG_VALUE_LIST instead of DBG_VALUE,
and replacing the first two operands with a single MO_DbgInstrRef-type
operand.
This patch is the first of a set that will allow DBG_INSTR_REF
instructions to refer to multiple machine locations in the same manner
as DBG_VALUE_LIST.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D129372
Over the past day or so, i've took a large swing at our tests,
and reduced the number of tests that were still using the old syntax
from ~1800 to just 200.
Left to handle: (as it is seen in this patch)
* Transforms/LSR
* Transforms/CGP
* Transforms/TypePromotion
* Transforms/HardwareLoops
* Analysis/*
* some misc.
I think this is the right point to start actively refusing
to honor the old syntax, except for the old tests,
to prevent the old syntax from creeping back in.
Thus, let's add temporary default-off flag,
and if it is not passed refuse to accept old syntax.
The tests that still need porting are annotated with this flag.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D139647
When the host's target triple ends in `-windows-msvc`, `%llc_dwarf`
contains an explicit `-windows-gnu` triple which ensures that dwarf will
be used. This is useful in target-independent tests, where no triple is
specified, and no target-specific features are used. However, this is
not compatible with target-dependent tests (such as those in
llvm/test/DebugInfo/ARM), as the command-line triple will override the
triple in the LLVM IR program, causing test issues on windows.
This change switches these tests to use an explicit triple, so the tests
test what was expected, and there is no flakiness on windows.
Fixes#58053
Differential Revision: https://reviews.llvm.org/D136066
This patch disables split-complex.ll for aarch64-pc-windows-msvc.
split-complex.ll fails with a crash when run on AArch64/Windows.
I have reported following issue: llvm-project/issues/58053
When compiling for the RWPI relocation model [1], the debug information
is wrong for readonly global variables.
Writable global variables are accessed by the static base register (R9
on ARM) in the RWPI relocation model. This is being correctly generated
Readonly global variables are not accessed by the static base register
in the RWPI relocation model. This case is incorrectly generating the
same debugging information as for writable global variables.
References:
[1] ARM Read-Write Position Independence: https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#read-write-position-independence-rwpi
Differential Revision: https://reviews.llvm.org/D126361
The TC_RETURN/TCRETURNdi under Arm does not currently add the
register-mask operand when tail folding, which leads to the register
(like LR) not being 'used' by the return. This changes the code to
unconditionally set the register mask on the call, as opposed to
skipping it for tail calls.
I don't believe this will currently alter any codegen, but should glue
things together better post-frame lowering. It matches the AArch64 code
better.
Differential Revision: https://reviews.llvm.org/D125906
When compiling for the RWPI relocation model the debug information is wrong:
* the debug location is described as { DW_OP_addr Var }
instead of { DW_OP_constNu Var DW_OP_bregX 0 DW_OP_plus }
* the relocation type is R_ARM_ABS32 instead of R_ARM_SBREL32
Differential Revision: https://reviews.llvm.org/D111404
