This is a small code size optimization that lets us avoid both shifting
and comparing to a constant if we need the shifted value anyway. On most
architectures the zero comparison is cheaper than a constant comparison
(or free if the shift sets flags).
Although this change appears to remove the optimization entirely, we
continue to do this transform if there is one use because of the code
below the removed code that transforms the shift into an and, followed
by the PR10267 case in InstCombinerImpl::foldICmpAndConstConst that
transforms the and into a ult/ugt. Added a test case to verify this
explicitly.
Per [1] reduces clang .text size by 0.09% and dynamic instruction count
by 0.01%.
[1] https://llvm-compile-time-tracker.com/compare.php?from=1f38d49ebe96417e368a567efa4d650b8a9ac30f&to=0873787a12b8f2eab019d8211ace4bccc1807343&stat=size-text
Reviewers: nikic, dtcxzyw
Reviewed By: dtcxzyw
Pull Request: https://github.com/llvm/llvm-project/pull/168007
Unused loop invariant loads were not sunk from the preheader to the exit
block, increasing live range.
This commit moves the sinkUnusedInvariant logic from indvarsimplify to
LICM also adds functionality to sink unused load that's not
clobbered by the loop body.
The `masked.load`, `masked.store`, `masked.gather` and `masked.scatter`
intrinsics currently accept a separate alignment immarg. Replace this
with an `align` attribute on the pointer / vector of pointers argument.
This is the standard representation for alignment information on
intrinsics, and is already used by all other memory intrinsics. This
means the signatures now match llvm.expandload, llvm.vp.load, etc.
(Things like llvm.memcpy used to have a separate alignment argument as
well, but were already migrated a long time ago.)
It's worth noting that the masked.gather and masked.scatter intrinsics
previously accepted a zero alignment to indicate the ABI type alignment
of the element type. This special case is gone now: If the align
attribute is omitted, the implied alignment is 1, as usual. If ABI
alignment is desired, it needs to be explicitly emitted (which the
IRBuilder API already requires anyway).
Now that #149310 has restricted lifetime intrinsics to only work on
allocas, we can also drop the explicit size argument. Instead, the size
is implied by the alloca.
This removes the ability to only mark a prefix of an alloca alive/dead.
We never used that capability, so we should remove the need to handle
that possibility everywhere (though many key places, including stack
coloring, did not actually respect this).
https://github.com/llvm/llvm-project/pull/147026 will enable sub
reductions, which require that the phi value is the first operand since
they aren't commutative. This re-orders the operands when executing
reductions, which actually matches other existing code in
VPReductionRecipe::execute.
This preserves the nuw/nsw flags on widened truncs by checking for
TruncInst in the VPIRFlags constructor
The motivation for this is to be able to fold away some redundant truncs
feeding into uitofps (or potentially narrow the inductions feeding them)
While sinking instructions (that are loop invariant) from preheader to
the exit block, we are skipping instructions due to decrementing
instruction iterator twice.
`-passes='default<O3>'` isn't correctly parsed on DOS, so when update_test_checks.py runs a system call on the opt RUN line, it fails to evaluate properly - use `-passes="default<O3>"` instead.
The idea behind this canonicalization is that it allows us to handle less
patterns, because we know that some will be canonicalized away. This is
indeed very useful to e.g. know that constants are always on the right.
However, this is only useful if the canonicalization is actually
reliable. This is the case for constants, but not for arguments: Moving
these to the right makes it look like the "more complex" expression is
guaranteed to be on the left, but this is not actually the case in
practice. It fails as soon as you replace the argument with another
instruction.
The end result is that it looks like things correctly work in tests,
while they actually don't. We use the "thwart complexity-based
canonicalization" trick to handle this in tests, but it's often a
challenge for new contributors to get this right, and based on the
regressions this PR originally exposed, we clearly don't get this right
in many cases.
For this reason, I think that it's better to remove this complexity
canonicalization. It will make it much easier to write tests for
commuted cases and make sure that they are handled.
Add a new PtrAdd opcode to VPInstruction that corresponds to
IRBuilder::CreatePtrAdd, which creates a GEP with source element type
i8.
This is then used to model scalarizing VPWidenPointerInductionRecipe by
introducing scalar-steps to model the index increment followed by a
PtrAdd.
Note that PtrAdd needs to be able to generate code for only the first
lane or for all lanes. This may warrant introducing a separate recipe
for scalarizing that can be created without relying on the underlying
IR.
Depends on https://github.com/llvm/llvm-project/pull/80271
PR: https://github.com/llvm/llvm-project/pull/83068
This patch canonicalizes getelementptr instructions with constant
indices to use the `i8` source element type. This makes it easier for
optimizations to recognize that two GEPs are identical, because they
don't need to see past many different ways to express the same offset.
This is a first step towards
https://discourse.llvm.org/t/rfc-replacing-getelementptr-with-ptradd/68699.
This is limited to constant GEPs only for now, as they have a clear
canonical form, while we're not yet sure how exactly to deal with
variable indices.
The test llvm/test/Transforms/PhaseOrdering/switch_with_geps.ll gives
two representative examples of the kind of optimization improvement we
expect from this change. In the first test SimplifyCFG can now realize
that all switch branches are actually the same. In the second test it
can convert it into simple arithmetic. These are representative of
common optimization failures we see in Rust.
Fixes https://github.com/llvm/llvm-project/issues/69841.
Set phi inputs to poison whenever we find a dead edge (either
during initial worklist population or the main InstCombine run),
instead of only doing this for successors of dead blocks.
This means that the phi operand is set to poison even if for
critical edges without an intermediate block.
There are quite a few test changes, because the pattern is fairly
common in vectorizer output, for cases where we know the vectorized
loop will be entered.
This is a follow-up to b71edfaa4ec3c998aadb35255ce2f60bba2940b0
since I forgot the lit.local.cfg files in that one.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Reviewed By: barannikov88, kwk
Differential Revision: https://reviews.llvm.org/D150762
With this patch an undefined mask in a shufflevector will be printed as poison.
This change is done to support the new shufflevector semantics
for undefined mask elements.
Differential Revision: https://reviews.llvm.org/D149210
This seems to cause large regressions in existing code, as much as 75% slower
(4x the time taken). Small always inline functions seem to be used a lot in the
cmsis-dsp library.
I would add a phase ordering test to show the problems, but one already exists!
The llvm/test/Transforms/PhaseOrdering/ARM/arm_mult_q15.ll was just changed by
removing alwaysinline to hide the problems that existed.
This reverts commit cae033dcf227aeecf58fca5af6fc7fde1fd2fb4f.
This reverts commit 8e33c41e72ad42e4c27f8cbc3ad2e02b169637a1.
We have several situations where it's beneficial for code size to ensure that every
call to always-inline functions are inlined before normal inlining decisions are
made. While the normal inliner runs in a "MandatoryOnly" mode to try to do this,
it only does it on a per-SCC basis, rather than the whole module. Ensuring that
all mandatory inlinings are done before any heuristic based decisions are made
just makes sense.
Despite being referred to the "legacy" AlwaysInliner pass, it's already necessary
for -O0 because the CGSCC inliner is too expensive in compile time to run at -O0.
This also fixes an exponential compile time blow up in
https://github.com/llvm/llvm-project/issues/59126
Differential Revision: https://reviews.llvm.org/D143624
We call tail-call-elim near the beginning of the pipeline,
but that is too early to annotate calls that get added later.
In the motivating case from issue #47852, the missing 'tail'
on memset leads to sub-optimal codegen.
I experimented with removing the early instance of
tail-call-elim instead of just adding another pass, but that
appears to be slightly worse for compile-time:
+0.15% vs. +0.08% time.
"tailcall" shows adding the pass; "tailcall2" shows moving
the pass to later, then adding the original early pass back
(so 1596886802 is functionally equivalent to 180b0439dc ):
https://llvm-compile-time-tracker.com/index.php?config=NewPM-O3&stat=instructions&remote=rotateright
Note that there was an effort to split the tail call functionality
into 2 passes - that could help reduce compile-time if we find
that this change costs more in compile-time than expected based
on the preliminary testing:
D60031
Differential Revision: https://reviews.llvm.org/D130374
When F calls G calls H, G is nounwind, and G is inlined into F, then the
inlined call-site to H should be effectively nounwind so as not to lose
information during inlining.
If H itself is nounwind (which often happens when H is an intrinsic), we
no longer mark the callsite explicitly as nounwind. Previously, there
were cases where the inlined call-site of H differs from a pre-existing
call-site of H in F *only* in the explicitly added nounwind attribute,
thus preventing common subexpression elimination.
v2:
- just check CI->doesNotThrow
v3 (resubmit after revert at 344378808778c61d5599f4e0ac783ef7e6f8ed05):
- update Clang tests
Differential Revision: https://reviews.llvm.org/D129860
When F calls G calls H, G is nounwind, and G is inlined into F, then the
inlined call-site to H should be effectively nounwind so as not to lose
information during inlining.
If H itself is nounwind (which often happens when H is an intrinsic), we
no longer mark the callsite explicitly as nounwind. Previously, there
were cases where the inlined call-site of H differs from a pre-existing
call-site of H in F *only* in the explicitly added nounwind attribute,
thus preventing common subexpression elimination.
v2:
- just check CI->doesNotThrow
Differential Revision: https://reviews.llvm.org/D129860
Now that integer min/max intrinsics have good support in both
InstCombine and other passes, start canonicalizing SPF min/max
to intrinsic min/max.
Once this sticks, we can stop matching SPF min/max in various
places, and can remove hacks we have for preventing infinite loops
and breaking of SPF canonicalization.
Differential Revision: https://reviews.llvm.org/D98152
The basic idea to this is that a) having a single canonical type makes CSE easier, and b) many of our transforms are inconsistent about which types we end up with based on visit order.
I'm restricting this to constants as for non-constants, we'd have to decide whether the simplicity was worth extra instructions. For constants, there are no extra instructions.
We chose the canonical type as i64 arbitrarily. We might consider changing this to something else in the future if we have cause.
Differential Revision: https://reviews.llvm.org/D115387
The min/max intrinsics are not yet canonical, but when they are the tail
predications analysis will change from treating them like icmp to
treating them like intrinsics. Unfortunately, they can currently produce
better code by not being tail predicated thanks to the vectorizer picking
higher VF's and the backend folding to better instructions (especially
for saturate patterns). In the long run we will need to improve the
vectorizers cost modelling, recognizing the instruction directly, but in
the meantime this treats min/max as before to prevent performance
regressions.
This tests code starting from smin/smax, as opposed to the icmp/select
form. Also adds a ARM MVE phase ordering test for vectorizing to
sadd.sat from the original IR.
Since d6de1e1a71406c75a4ea4d5a2fe84289f07ea3a1, no attributes is quivalent to
setting attribute to false.
This is a preliminary commit for https://reviews.llvm.org/D99080
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Initially reverted due to BasicAA running analyses in an unspecified
order (multiple function calls as parameters), fixed by fetching
analyses before the call to construct BasicAA.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
Explicitly opt-out llvm/test/Transforms/Attributor.
Verified by flipping the default value of allow-unused-prefixes and
observing that none of the failures were under llvm/test/Transforms.
Differential Revision: https://reviews.llvm.org/D92404
Currently, `-indvars` runs first, and then immediately after `-loop-idiom` does.
I'm not really sure if `-loop-idiom` requires `-indvars` to run beforehand,
but i'm *very* sure that `-indvars` requires `-loop-idiom` to run afterwards,
as it can be seen in the phase-ordering test.
LoopIdiom runs on two types of loops: countable ones, and uncountable ones.
For uncountable ones, IndVars obviously didn't make any change to them,
since they are uncountable, so for them the order should be irrelevant.
For countable ones, well, they should have been countable before IndVars
for IndVars to make any change to them, and since SCEV is used on them,
it shouldn't matter if IndVars have already canonicalized them.
So i don't really see why we'd want the current ordering.
Should this cause issues, it will give us a reproducer test case
that shows flaws in this logic, and we then could adjust accordingly.
While this is quite likely beneficial in-the-wild already,
it's a required part for the full motivational pattern
behind `left-shift-until-bittest` loop idiom (D91038).
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D91800
