We do indeed already get it right in some cases, but only transitively,
with one-use restrictions. Since we only need to produce a single
comparison, it makes sense to match the pattern directly:
https://rise4fun.com/Alive/kPg
llvm-svn: 373802
Initially (D65380) i believed that if we have rightshift-trunc-rightshift,
we can't do any folding. But as it usually happens, i was wrong.
https://rise4fun.com/Alive/GEwhttps://rise4fun.com/Alive/gN2O
In https://bugs.llvm.org/show_bug.cgi?id=43564 we happen to have
this very sequence, of two right shifts separated by trunc.
And "just" so that happens, we apparently can fold the pattern
if the total shift amount is either 0, or it's equal to the bitwidth
of the innermost widest shift - i.e. if we are left with only the
original sign bit. Which is exactly what is wanted there.
llvm-svn: 373801
https://rise4fun.com/Alive/8BY - valid for lshr+trunc+variable sext
https://rise4fun.com/Alive/7jk - the variable sext can be redundant
https://rise4fun.com/Alive/Qslu - 'exact'-ness of first shift can be preserver
https://rise4fun.com/Alive/IF63 - without trunc we could view this as
more general "drop redundant mask before right-shift",
but let's handle it here for now
https://rise4fun.com/Alive/iip - likewise, without trunc, variable sext can be redundant.
There's more patterns for sure - e.g. we can have 'lshr' as the final shift,
but that might be best handled by some more generic transform, e.g.
"drop redundant masking before right-shift" (PR42456)
I'm singling-out this sext patch because you can only extract
high bits with `*shr` (unlike abstract bit masking),
and i *know* this fold is wanted by existing code.
I don't believe there is much to review here,
so i'm gonna opt into post-review mode here.
https://bugs.llvm.org/show_bug.cgi?id=43523
llvm-svn: 373542
Summary:
This is valid for any `sext` bitwidth pair:
```
Processing /tmp/opt.ll..
----------------------------------------
%signed = sext %y
%r = shl %x, %signed
ret %r
=>
%unsigned = zext %y
%r = shl %x, %unsigned
ret %r
%signed = sext %y
Done: 2016
Optimization is correct!
```
(This isn't so for funnel shifts, there it's illegal for e.g. i6->i7.)
Main motivation is the C++ semantics:
```
int shl(int a, char b) {
return a << b;
}
```
ends as
```
%3 = sext i8 %1 to i32
%4 = shl i32 %0, %3
```
https://godbolt.org/z/0jgqUq
which is, as this shows, too pessimistic.
There is another problem here - we can only do the fold
if sext is one-use. But we can trivially have cases
where several shifts have the same sext shift amount.
This should be resolved, later.
Reviewers: spatel, nikic, RKSimon
Reviewed By: spatel
Subscribers: efriedma, hiraditya, nlopes, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68103
llvm-svn: 373106
The test case here previously infinite looped. Only one element from the GEP is used so SimplifyDemandedVectorElts would replace the other lanes in each index with undef leading to the first index being <0, undef, undef, undef>. But there's a GEP transform that tries to replace an index into a 0 sized type with a zero index. But the zero index check only works on ConstantInt 0 or ConstantAggregateZero so it would turn the index back to zeroinitializer. Resulting in a loop.
The fix is to use m_Zero() to allow a vector of zeroes and undefs.
Differential Revision: https://reviews.llvm.org/D67977
llvm-svn: 373000
Summary:
Removing an assumption (assert) that the CmpInst already has been
simplified in getFlippedStrictnessPredicateAndConstant. Solution is
to simply bail out instead of hitting the assertion. Instead we
assume that any profitable rewrite will happen in the next iteration
of InstCombine.
The reason why we can't assume that the CmpInst already has been
simplified is that the worklist does not guarantee such an ordering.
Solves https://bugs.llvm.org/show_bug.cgi?id=43376
Reviewers: spatel, lebedev.ri
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68022
llvm-svn: 372972
https://rise4fun.com/Alive/KtL
This also shows that the fold added in D67412 / r372257
was too specific, and the new fold allows those test cases
to be handled more generically, therefore i delete now-dead code.
This is yet again motivated by
D67122 "[UBSan][clang][compiler-rt] Applying non-zero offset to nullptr is undefined behaviour"
llvm-svn: 372912
As @reames pointed out post-commit, rL371518 adds additional rounding
in some cases, when doing constant folding of the multiplication.
This breaks a guarantee llvm.fma makes and must be avoided.
This patch reapplies rL371518, but splits off the simplifications not
requiring rounding from SimplifFMulInst as SimplifyFMAFMul.
Reviewers: spatel, lebedev.ri, reames, scanon
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D67434
llvm-svn: 372899
Currently m_Br only takes references to BasicBlock*, which limits its
flexibility. For example, you have to declare a variable, even if you
ignore the result or you have to have additional checks to make sure the
matched BB matches an expected one.
This patch adds m_BasicBlock and m_SpecificBB matchers, which can be
used like the existing matchers for constants or values.
I also had a look at the existing uses and updated a few. IMO it makes
the code a bit more explicit.
Reviewers: spatel, craig.topper, RKSimon, majnemer, lebedev.ri
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D68013
llvm-svn: 372885
If we generate the gc.relocate, and then later prove two arguments to the statepoint are equivalent, we should canonicalize the gc.relocate to the form we would have produced if this had been known before rewriting.
llvm-svn: 372771
Summary:
This is again motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
For
```
#include <cassert>
char* test(char& base, signed long offset) {
__builtin_assume(offset < 0);
return &base + offset;
}
```
We produce
https://godbolt.org/z/r40U47
and again those two icmp's can be merged:
```
Name: 0
Pre: C != 0
%adjusted = add i8 %base, C
%not_null = icmp ne i8 %adjusted, 0
%no_underflow = icmp ult i8 %adjusted, %base
%r = and i1 %not_null, %no_underflow
=>
%neg_offset = sub i8 0, C
%r = icmp ugt i8 %base, %neg_offset
```
https://rise4fun.com/Alive/ALaphttps://rise4fun.com/Alive/slnN
There are 3 other variants of this pattern,
i believe they all will go into InstSimplify.
https://bugs.llvm.org/show_bug.cgi?id=43259
Reviewers: spatel, xbolva00, nikic
Reviewed By: spatel
Subscribers: efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67849
llvm-svn: 372768
Summary:
This is again motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
This pattern isn't exactly what we get there
(strict vs. non-strict predicate), but this pattern does not
require known-bits analysis, so it is best to handle it first.
```
Name: 0
%adjusted = add i8 %base, %offset
%not_null = icmp ne i8 %adjusted, 0
%no_underflow = icmp ule i8 %adjusted, %base
%r = and i1 %not_null, %no_underflow
=>
%neg_offset = sub i8 0, %offset
%r = icmp ugt i8 %base, %neg_offset
```
https://rise4fun.com/Alive/knp
There are 3 other variants of this pattern,
they all will go into InstSimplify:
https://rise4fun.com/Alive/bIDZhttps://bugs.llvm.org/show_bug.cgi?id=43259
Reviewers: spatel, xbolva00, nikic
Reviewed By: spatel
Subscribers: hiraditya, majnemer, vsk, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67846
llvm-svn: 372767
Summary:
Fold
or(ashr(subNSW(Y, X), ScalarSizeInBits(Y)-1), X)
into
X s> Y ? -1 : X
https://rise4fun.com/Alive/d8Ab
clamp255 is a common operator in image processing, can be implemented
in a shifty way "(255 - X) >> 31 | X & 255". Fold shift into select
enables more optimization, e.g., vmin generation for ARM target.
Reviewers: lebedev.ri, efriedma, spatel, kparzysz, bcahoon
Reviewed By: lebedev.ri
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67800
llvm-svn: 372678
"Implementations are free to malloc() a buffer containing either (size + 1) bytes or (strnlen(s, size) + 1) bytes. Applications should not assume that strndup() will allocate (size + 1) bytes when strlen(s) is smaller than size."
llvm-svn: 372647
Summary:
Motivation:
- If we can fold it to strdup, we should (strndup does more things than strdup).
- Annotation mechanism. (Works for strdup well).
strdup and strndup are part of C 20 (currently posix fns), so we should optimize them.
Reviewers: efriedma, jdoerfert
Reviewed By: jdoerfert
Subscribers: lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67679
llvm-svn: 372636
Summary:
If we have a pattern `(x & (-1 >> maskNbits)) << shiftNbits`,
we already know (have a fold) that will drop the `& (-1 >> maskNbits)`
mask iff `(shiftNbits-maskNbits) s>= 0` (i.e. `shiftNbits u>= maskNbits`).
So even if `(shiftNbits-maskNbits) s< 0`, we can still
fold, we will just need to apply a **constant** mask afterwards:
```
Name: c, normal+mask
%t0 = lshr i32 -1, C1
%t1 = and i32 %t0, %x
%r = shl i32 %t1, C2
=>
%n0 = shl i32 %x, C2
%n1 = i32 ((-(C2-C1))+32)
%n2 = zext i32 %n1 to i64
%n3 = lshr i64 -1, %n2
%n4 = trunc i64 %n3 to i32
%r = and i32 %n0, %n4
```
https://rise4fun.com/Alive/gslRa
Naturally, old `%masked` will have to be one-use.
This is not valid for pattern f - where "masking" is done via `ashr`.
https://bugs.llvm.org/show_bug.cgi?id=42563
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67725
llvm-svn: 372630
Summary:
And this is **finally** the interesting part of that fold!
If we have a pattern `(x & (~(-1 << maskNbits))) << shiftNbits`,
we already know (have a fold) that will drop the `& (~(-1 << maskNbits))`
mask iff `(maskNbits+shiftNbits) u>= bitwidth(x)`.
But that is actually ignorant, there's more general fold here:
In this pattern, `(maskNbits+shiftNbits)` actually correlates
with the number of low bits that will remain in the final value.
So even if `(maskNbits+shiftNbits) u< bitwidth(x)`, we can still
fold, we will just need to apply a **constant** mask afterwards:
```
Name: a, normal+mask
%onebit = shl i32 -1, C1
%mask = xor i32 %onebit, -1
%masked = and i32 %mask, %x
%r = shl i32 %masked, C2
=>
%n0 = shl i32 %x, C2
%n1 = add i32 C1, C2
%n2 = zext i32 %n1 to i64
%n3 = shl i64 -1, %n2
%n4 = xor i64 %n3, -1
%n5 = trunc i64 %n4 to i32
%r = and i32 %n0, %n5
```
https://rise4fun.com/Alive/F5R
Naturally, old `%masked` will have to be one-use.
Similar fold exists for patterns c,d,e, will post patch later.
https://bugs.llvm.org/show_bug.cgi?id=42563
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67677
llvm-svn: 372629
This has the potential to uncover missed analysis/folds as shown in the
min/max code comment/test, but fewer restrictions on icmp folds should
be better in general to solve cases like:
https://bugs.llvm.org/show_bug.cgi?id=43310
llvm-svn: 372510
Summary:
This is again motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
In this particular case, given
```
char* test(char& base, unsigned long offset) {
return &base - offset;
}
```
it will end up producing something like
https://godbolt.org/z/luGEju
which after optimizations reduces down to roughly
```
declare void @use64(i64)
define i1 @test(i8* dereferenceable(1) %base, i64 %offset) {
%base_int = ptrtoint i8* %base to i64
%adjusted = sub i64 %base_int, %offset
call void @use64(i64 %adjusted)
%not_null = icmp ne i64 %adjusted, 0
%no_underflow = icmp ule i64 %adjusted, %base_int
%no_underflow_and_not_null = and i1 %not_null, %no_underflow
ret i1 %no_underflow_and_not_null
}
```
Without D67122 there was no `%not_null`,
and in this particular case we can "get rid of it", by merging two checks:
Here we are checking: `Base u>= Offset && (Base u- Offset) != 0`, but that is simply `Base u> Offset`
Alive proofs:
https://rise4fun.com/Alive/QOs
The `@llvm.usub.with.overflow` pattern itself is not handled here
because this is the main pattern, that we currently consider canonical.
https://bugs.llvm.org/show_bug.cgi?id=43251
Reviewers: spatel, nikic, xbolva00, majnemer
Reviewed By: xbolva00, majnemer
Subscribers: vsk, majnemer, xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67356
llvm-svn: 372341
Summary:
I don't have a direct motivational case for this,
but it would be good to have this for completeness/symmetry.
This pattern is basically the motivational pattern from
https://bugs.llvm.org/show_bug.cgi?id=43251
but with different predicate that requires that the offset is non-zero.
The completeness bit comes from the fact that a similar pattern (offset != zero)
will be needed for https://bugs.llvm.org/show_bug.cgi?id=43259,
so it'd seem to be good to not overlook very similar patterns..
Proofs: https://rise4fun.com/Alive/21b
Also, there is something odd with `isKnownNonZero()`, if the non-zero
knowledge was specified as an assumption, it didn't pick it up (PR43267)
With this, i see no other missing folds for
https://bugs.llvm.org/show_bug.cgi?id=43251
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67412
llvm-svn: 372257
Related folds were added in:
rL125734
...the code comment about register pressure is discussed in
more detail in:
https://bugs.llvm.org/show_bug.cgi?id=2698
But 10 years later, perf testing bzip2 with this change now
shows a slight (0.2% average) improvement on Haswell although
that's probably within test noise.
Given that this is IR canonicalization, we shouldn't be worried
about register pressure though; the backend should be able to
adjust for that as needed.
This is part of solving PR43310 the theoretically right way:
https://bugs.llvm.org/show_bug.cgi?id=43310
...ie, if we don't cripple basic transforms, then we won't
need to add special-case code to detect larger patterns.
rL371940 and rL371981 are related patches in this series.
llvm-svn: 372007
This fold and several others were added in:
rL125734 <https://reviews.llvm.org/rL125734>
...with no explanation for the one-use checks other than the code
comments about register pressure.
Given that this is IR canonicalization, we shouldn't be worried
about register pressure though; the backend should be able to
adjust for that as needed.
This is part of solving PR43310 the theoretically right way:
https://bugs.llvm.org/show_bug.cgi?id=43310
...ie, if we don't cripple basic transforms, then we won't
need to add special-case code to detect larger patterns.
rL371940 is a related patch in this series.
llvm-svn: 371981
This blob was written before match() existed, so it
could probably be reduced significantly.
But I suspect it isn't well tested, so tests would have
to be added to reduce risk from logic changes.
llvm-svn: 371978
This fold and several others were added in:
rL125734
...with no explanation for the one-use checks other than the code
comments about register pressure.
Given that this is IR canonicalization, we shouldn't be worried
about register pressure though; the backend should be able to
adjust for that as needed.
There are similar checks as noted with the TODO comments. I'm
hoping to remove those restrictions too, but if any of these
does cause a regression, it should be easier to correct by making
small, individual commits.
This is part of solving PR43310 the theoretically right way:
https://bugs.llvm.org/show_bug.cgi?id=43310
...ie, if we don't cripple basic transforms, then we won't
need to add special-case code to detect larger patterns.
llvm-svn: 371940
This introduces additional rounding error in some cases. See D67434.
This reverts r371518 (git commit 18a1f0818b659cee13865b4fad2648d85984a4ed)
llvm-svn: 371634
(srem X, pow2C) sgt/slt 0 can be reduced using bit hacks by masking
off the sign bit and the module (low) bits:
https://rise4fun.com/Alive/jSO
A '2' divisor allows slightly more folding:
https://rise4fun.com/Alive/tDBM
Any chance to remove an 'srem' use is probably worthwhile, but this is limited
to the one-use improvement case because doing more may expose other missing
folds. That means it does nothing for PR21929 yet:
https://bugs.llvm.org/show_bug.cgi?id=21929
Differential Revision: https://reviews.llvm.org/D67334
llvm-svn: 371610
TryToSinkInstruction() has a bug: While updating debug info for
sunk instruction, it could clone dbg.declare intrinsic.
That is wrong. There could be only one dbg.declare.
The fix is to not clone dbg.declare intrinsic and to update
it`s arguments, to not to point to sunk instruction.
Differential Revision: https://reviews.llvm.org/D67217
llvm-svn: 371587
This allows us to fold fma's that multiply with 0.0. Also, the
multiply by 1.0 case is handled there as well. The fneg/fabs cases
are not handled by SimplifyFMulInst, so we need to keep them.
Reviewers: spatel, anemet, lebedev.ri
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D67351
llvm-svn: 371518
This is similar to the existing fold for splats added with:
rL365379
If we can adjust the shuffle mask to include another element
in an identity mask (if it changes vector length, that's an
extract/insert subvector operation in the backend), then that
can eliminate extractelement/insertelement pairs in IR.
All targets are expected to lower shuffles with identity masks
efficiently.
llvm-svn: 371340
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
