Judging by the existing comments, this was the intention, but the
transform never actually checked if the existing phi's would be removed.
See https://bugs.llvm.org/show_bug.cgi?id=44242 for an example where
this causes much worse code generation on AMDGPU.
Differential Revision: https://reviews.llvm.org/D71209
Summary:
This patch adds instructions to the InstCombine worklist after they are properly inserted. This way we don't get `<badref>`s printed when logging added instructions.
It also adds a check in `Worklist::Add` that ensures that all added instructions have parents.
Simple test case that illustrates the difference when run with `--debug-only=instcombine`:
```
define i32 @test35(i32 %a, i32 %b) {
%1 = or i32 %a, 1135
%2 = or i32 %1, %b
ret i32 %2
}
```
Before this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: <badref> = or i32 %2, 1135
...
```
With this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: %3 = or i32 %2, 1135
...
```
Reviewers: fhahn, davide, spatel, foad, grosser, nikic
Reviewed By: nikic
Subscribers: nikic, lebedev.ri, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71093
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
This makes no difference currently because we don't apply FMF
to FP casts, but that may change.
This could also be a place to add a fold for select with fptrunc,
so it will make that patch easier/smaller.
This reverts these two commits
[InstCombine] Turn (extractelement <1 x i64/double> (bitcast (x86_mmx))) into a single bitcast from x86_mmx to i64/double.
[InstCombine] Don't transform bitcasts between x86_mmx and v1i64 into insertelement/extractelement
We're seeing at least one internal test failure related to a
bitcast that was previously before an inline assembly block
containing emms being placed after it. This leads to the mmx
state ending up not empty after the emms. IR has no way to
make any specific guarantees about this. Reverting these patches
to get back to previous behavior which at least worked for this
test.
Summary:
optimizeVectorResize is rewriting patterns like:
%1 = bitcast vector %src to integer
%2 = trunc/zext %1
%dst = bitcast %2 to vector
Since bitcasting between integer an vector types gives
different integer values depending on endianness, we need
to take endianness into account. As it happens the old
implementation only produced the correct result for little
endian targets.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=44178
Reviewers: spatel, lattner, lebedev.ri
Reviewed By: spatel, lebedev.ri
Subscribers: lebedev.ri, hiraditya, uabelho, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70844
x86_mmx is conceptually a vector already. Don't introduce an extra conversion between it and scalar i64.
I'm using VectorType::isValidElementType which checks for floating point, integer, and pointers to hopefully make this more readable than just blacklisting x86_mmx.
Differential Revision: https://reviews.llvm.org/D69964
Follow-up to D68244 to account for a corner case discussed in:
https://bugs.llvm.org/show_bug.cgi?id=43501
Add one more restriction: if the pointer is deref-or-null and in a non-default
(non-zero) address space, we can't assume inbounds.
Differential Revision: https://reviews.llvm.org/D68706
llvm-svn: 374728
bitcast <N x i8> (shuf X, undef, <N, N-1,...0>) to i{N*8} --> bswap (bitcast X to i{N*8})
In PR43146:
https://bugs.llvm.org/show_bug.cgi?id=43146
...we have a more complicated case where SLP is making a mess of bswap. This patch won't
do anything for that currently, but we need to improve bswap recognition in instcombine,
SLP, and/or a standalone pass to avoid that problem.
This is limited using the data-layout so we don't try to do this transform with actual
vector types. The backend does not appear to have folds to convert in either direction,
so we don't want to mess up something that is actually better lowered as a shuffle.
On x86, we're trading something like this:
vmovd %edi, %xmm0
vpshufb LCPI0_0(%rip), %xmm0, %xmm0 ## xmm0 = xmm0[3,2,1,0,u,u,u,u,u,u,u,u,u,u,u,u]
vmovd %xmm0, %eax
For:
movl %edi, %eax
bswapl %eax
Differential Revision: https://reviews.llvm.org/D66965
llvm-svn: 370659
This reverts commit bc4a63fd3c29c1a8ce22891bf34ee4dccfef578c, this is a
speculative revert to fix a number of sanitizer bots (like
sanitizer-x86_64-linux-bootstrap-ubsan) that have started to see stage2
compiler crashes, presumably due to a miscompile.
llvm-svn: 367029
trunc (load X) --> load (bitcast X to narrow type)
We have this transform in DAGCombiner::ReduceLoadWidth(), but the truncated
load pattern can interfere with other instcombine transforms, so I'd like to
allow the fold sooner.
Example:
https://bugs.llvm.org/show_bug.cgi?id=16739
...in that report, we have bitcasts bracketing these ops, so those could get
eliminated too.
We've generally ruled out widening of loads early in IR ( LoadCombine -
http://lists.llvm.org/pipermail/llvm-dev/2016-September/105291.html ), but
that reasoning may not apply to narrowing if we can preserve information
such as the dereferenceable range.
Differential Revision: https://reviews.llvm.org/D64432
llvm-svn: 367011
The worklist loop that we're returning back to should be able to do the repacement itself. This is how we normally do replacements.
My main motivation was that I observed that we weren't preserving the name of the result when we do this transform. The replacement code in the worklist loop will call takeName as part of the replacement.
Differential Revision: https://reviews.llvm.org/D61695
llvm-svn: 360284
For some specific cases with bitcast A->B->A with intervening PHI nodes InstCombiner::optimizeBitCastFromPhi transformation creates extra PHI nodes, which are actually a copy of already created PHI or in another words, they are redundant. These extra PHI nodes could lead to extra move instructions generated after DeSSA transformation. This happens when several conditions are met
- SROA kicks in and creates new alloca;
- there is a simple assignment L = R, which falls under 'canonicalize loads' done by combineLoadToOperationType (this transformation is by default). Exactly this transformation is the reason of bitcasts generated;
- the alloca is then used in A->B->A + PHI chain;
- there is a loop unrolling.
As a result optimizeBitCastFromPhi creates as many of PHI nodes for each new SROA alloca as loop unrolling factor is. These new extra PHI nodes are redundant actually except of one and should not be created. Moreover the idea of optimizeBitCastFromPhi is to get rid of the cast (when possible) but that doesn't happen in these conditions.
The proposed fix is to do the cast replacement for the whole calculated/accumulated PHI closure not for one cast only, which is an argument to the optimizeBitCastFromPhi. These will help to accomplish several things: 1) avoid extra PHI nodes generated as all casts which may trigger optimizeBitCastFromPhi transformation will be replaced, 3) bitcasts will be replaced, and 3) create more opportunities to remove dead code, which appears after the replacement.
A new test case shows that it's possible to get rid of all bitcasts completely and get quite good code reduction.
Author: Igor Tsimbalist <igor.v.tsimbalist@intel.com>
Reviewed By: Carrot
Differential Revision: https://reviews.llvm.org/D57053
llvm-svn: 353595
This cleans up all GetElementPtr creation in LLVM to explicitly pass a
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57173
llvm-svn: 352913
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Similar to rL350199 - there are no known analysis/codegen holes for
funnel shift intrinsics now, so we can canonicalize the 6+ regular
instructions to funnel shift to improve vectorization, inlining,
unrolling, etc.
llvm-svn: 350419
The problem is shown specifically for a case with vector multiply here:
https://bugs.llvm.org/show_bug.cgi?id=40032
...and this might mask the original backend bug for ARM shown in:
https://bugs.llvm.org/show_bug.cgi?id=39967
As the test diffs here show, we were (and probably still aren't) doing
these kinds of transforms in a principled way. We are producing more or
equal wide instructions than we started with in some cases, so we still
need to restrict/correct other transforms from overstepping.
If there are perf regressions from this change, we can either carve out
exceptions to the general IR rules, or improve the backend to do these
transforms when we know the transform is profitable. That's probably
similar to a change like D55448.
Differential Revision: https://reviews.llvm.org/D55744
llvm-svn: 349389
This is a longer variant for the pattern handled in
rL346713
This one includes zexts.
Eventually, we should canonicalize all rotate patterns
to the funnel shift intrinsics, but we need a bit more
infrastructure to make sure the vectorizers handle those
intrinsics as well as the shift+logic ops.
https://rise4fun.com/Alive/FMn
Name: narrow rotateright
%neg = sub i8 0, %shamt
%rshamt = and i8 %shamt, 7
%rshamtconv = zext i8 %rshamt to i32
%lshamt = and i8 %neg, 7
%lshamtconv = zext i8 %lshamt to i32
%conv = zext i8 %x to i32
%shr = lshr i32 %conv, %rshamtconv
%shl = shl i32 %conv, %lshamtconv
%or = or i32 %shl, %shr
%r = trunc i32 %or to i8
=>
%maskedShAmt2 = and i8 %shamt, 7
%negShAmt2 = sub i8 0, %shamt
%maskedNegShAmt2 = and i8 %negShAmt2, 7
%shl2 = lshr i8 %x, %maskedShAmt2
%shr2 = shl i8 %x, %maskedNegShAmt2
%r = or i8 %shl2, %shr2
llvm-svn: 346716
The sub-pattern for the shift amount in a rotate can take on
several different forms, and there's apparently no way to
canonicalize those without seeing the entire rotate sequence.
This is the form noted in:
https://bugs.llvm.org/show_bug.cgi?id=39624https://rise4fun.com/Alive/qnT
%zx = zext i8 %x to i32
%maskedShAmt = and i32 %shAmt, 7
%shl = shl i32 %zx, %maskedShAmt
%negShAmt = sub i32 0, %shAmt
%maskedNegShAmt = and i32 %negShAmt, 7
%shr = lshr i32 %zx, %maskedNegShAmt
%rot = or i32 %shl, %shr
%r = trunc i32 %rot to i8
=>
%truncShAmt = trunc i32 %shAmt to i8
%maskedShAmt2 = and i8 %truncShAmt, 7
%shl2 = shl i8 %x, %maskedShAmt2
%negShAmt2 = sub i8 0, %truncShAmt
%maskedNegShAmt2 = and i8 %negShAmt2, 7
%shr2 = lshr i8 %x, %maskedNegShAmt2
%r = or i8 %shl2, %shr2
llvm-svn: 346713
Replacing BinaryOperator::isFNeg(...) to avoid regressions when we
separate FNeg from the FSub IR instruction.
Differential Revision: https://reviews.llvm.org/D53650
llvm-svn: 345295
Workaround bug where the InstCombine pass was asserting on the IR added in lit
test, where we have a bitcast instruction after a GEP from an addrspace cast.
The second bitcast in the test was getting combined into
`bitcast <16 x i32>* %0 to <16 x i32> addrspace(3)*`, which looks like it should
be an addrspace cast instruction instead. Otherwise if control flow is allowed
to continue as it is now we create a GEP instruction
`<badref> = getelementptr inbounds <16 x i32>, <16 x i32>* %0, i32 0`. However
because the type of this instruction doesn't match the address space we hit an
assert when replacing the bitcast with that GEP.
```
void llvm::Value::doRAUW(llvm::Value*, bool): Assertion `New->getType() == getType() && "replaceAllUses of value with new value of different type!"' failed.
```
Differential Revision: https://reviews.llvm.org/D50058
llvm-svn: 338395
InstCombine has a cast transform that matches a cast-of-select:
Orig = cast (Src = select Cond TV FV)
And tries to replace it with a select which has the cast folded in:
NewSel = select Cond (cast TV) (cast FV)
The combiner does RAUW(Orig, NewSel), so any debug values for Orig would
survive the transform. But debug values for Src would be lost.
This patch teaches InstCombine to replace all debug uses of Src with
NewSel (taking care of doing any necessary DIExpression rewriting).
Differential Revision: https://reviews.llvm.org/D49270
llvm-svn: 337310
The replaceAllDbgUsesWith utility helps passes preserve debug info when
replacing one value with another.
This improves upon the existing insertReplacementDbgValues API by:
- Updating debug intrinsics in-place, while preventing use-before-def of
the replacement value.
- Falling back to salvageDebugInfo when a replacement can't be made.
- Moving the responsibiliy for rewriting llvm.dbg.* DIExpressions into
common utility code.
Along with the API change, this teaches replaceAllDbgUsesWith how to
create DIExpressions for three basic integer and pointer conversions:
- The no-op conversion. Applies when the values have the same width, or
have bit-for-bit compatible pointer representations.
- Truncation. Applies when the new value is wider than the old one.
- Zero/sign extension. Applies when the new value is narrower than the
old one.
Testing:
- check-llvm, check-clang, a stage2 `-g -O3` build of clang,
regression/unit testing.
- This resolves a number of mis-sized dbg.value diagnostics from
Debugify.
Differential Revision: https://reviews.llvm.org/D48676
llvm-svn: 336451
We have bailout hacks based on min/max in various places in instcombine
that shouldn't be necessary. The affected test was added for:
D48930
...which is a consequence of the improvement in:
D48584 (https://reviews.llvm.org/rL336172)
I'm assuming the visitTrunc bailout in this patch was added specifically
to avoid a change from SimplifyDemandedBits, so I'm just moving that
below the EvaluateInDifferentType optimization. A narrow min/max is still
a min/max.
llvm-svn: 336293
When zext is EvaluatedInDifferentType, InstCombine
drops the dbg.value intrinsic. This patch tries to
preserve said DI, by inserting the zext's old DI in the
resulting instruction. (Only for integer type for now)
Differential Revision: https://reviews.llvm.org/D48331
llvm-svn: 336254
This prevents InstCombine from creating mis-sized dbg.values when
replacing a sequence of casts with a simpler cast. For example, in:
(fptrunc (floor (fpext X))) -> (floorf X)
We no longer emit dbg.value(X) (with a 32-bit float operand) to describe
(fpext X) (which is a 64-bit float).
This was diagnosed by the debugify check added in r335682.
llvm-svn: 335696
