Similar to vp_depth_first_shallow (D140512) add vp_depth_first_deep to
make existing code clearer and more compact.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D142055
This patch adds a new VPBlockShallowTraversalWrapper struct to
provide graph traits specialization that do not traverse through
VPRegionBlocks. This matches the behavior of the existing traits for
plain VPBlockBase and is a step before moving the graph traits for
VPBlockBase to traverse through VPRegionBlocks to enable cross region
support in VPDominatorTree.
Depends on D140511.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D140512
This reduces the size of VPlan.h and avoids future growth of the file
when the graph traits are extended in future patches.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D140500
Add verification that VPHeaderPHIRecipes are only in header VPBBs. Also
adds missing checks for VPPointerInductionRecipe to
VPHeaderPHIRecipe::classof.
Split off from D119661.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D131989
This patch introduces some initial def-use verification. This catches
cases like the one fixed by D129436.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D129717
Currently, for vectorised loops that use the get.active.lane.mask
intrinsic we only use the mask for predicated vector operations,
such as masked loads and stores, etc. The loop itself is still
controlled by comparing the canonical induction variable with the
trip count. However, for some targets this is inefficient when it's
cheap to use the mask itself to control the loop.
This patch adds support for using the active lane mask for control
flow by:
1. Generating the active lane mask for the next iteration of the
vector loop, rather than the current one. If there are still any
remaining iterations then at least the first bit of the mask will
be set.
2. Extract the first bit of this mask and use this bit for the
conditional branch.
I did this by creating a new VPActiveLaneMaskPHIRecipe that sets
up the initial PHI values in the vector loop pre-header. I've also
made use of the new BranchOnCond VPInstruction for the final
instruction in the loop region.
Differential Revision: https://reviews.llvm.org/D125301
This patch removes CondBit and Predicate from VPBasicBlock. To do so,
the patch introduces a new branch-on-cond VPInstruction opcode to model
a branch on a condition explicitly.
This addresses a long-standing TODO/FIXME that blocks shouldn't be users
of VPValues. Those extra users can cause issues for VPValue-based
analyses that don't expect blocks. Addressing this fixme should allow us
to re-introduce 266ea446ab7476.
The generic branch opcode can also be used in follow-up patches.
Depends on D123005.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D126618
This patch updates the VPlan native path to use VPRegionBlocks for all
loops in a loop nest. Up to now, only the outermost loop used a region.
This is a step towards unifying both paths and keep things consistent
between them. It also prepares various code-gen parts for modeling the
pre-header in the inner loop vectorizer (D121624).
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123005
In LLVM's common loop terminology, an exit block is a block outside a
loop with a predecessor inside the loop. An exiting block is a block
inside the loop which branches to an exit block outside the loop.
This patch updates a few places where VPlan was using ExitBlock for a
block exiting a region. Those instances have been updated to use
ExitingBlock.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D126173
This patch introduces a new VPLiveOut subclass of VPUser to model
exit values explicitly. The initial version handles exit values that
are neither part of induction or reduction chains nor first order
recurrence phis.
Fixes#51366, #54867, #55167, #55459
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123537
Update all places that currently assume the entry block to the plan is
also the vector loop header to use getVectorLoopRegion instead.
getVectorLoopRegion will keep doing the right thing when the pre-header
is modeled explicitly (and becomes the new entry block in the plan).
This patch adds a new BranchOnCount VPInstruction opcode with 2
operands. It first compares its 2 operands (increment of canonical
induction and vector trip count), followed by a branch to either the
exit block or back to the vector header.
It must be the last recipe in the exit block of the topmost vector loop
region.
This extracts parts from D113224 and was discussed in D113223.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D116479
At the moment, the primary induction variable for the vector loop is
created as part of the skeleton creation. This is tied to creating the
vector loop latch outside of VPlan. This prevents from modeling the
*whole* vector loop in VPlan, which in turn is required to model
preheader and exit blocks in VPlan as well.
This patch introduces a new recipe VPCanonicalIVPHIRecipe to represent the
primary IV in VPlan and CanonicalIVIncrement{NUW} opcodes for
VPInstruction to model the increment.
This allows us to partly retire createInductionVariable. At the moment,
a bit of patching up is done after executing all blocks in the plan.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D113223
Both the entry and exit blocks of the top-region of a plan must be
VPBasicBlocks. They also must have no predecessors or successors
respectively.
This invariant was broken when splitting a block for sink-after. To fix
the issue, set the exit block of the region *after* sink-after is done.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D114586
This patch adds a function to verify general properties of VPlans. The
first check makes sure that all phi-like recipes are at the beginning of
a block, with no other recipes in between.
Note that this currently may not hold for VPBlendRecipes at the moment,
as other recipes may be inserted before the VPBlendRecipe during mask
creation.
Note that this patch depends on D111300 and D111301, which fix code that
breaks the checked invariant.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D111302
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch introduces a VPValue in VPBlockBase to represent the condition
bit that is used as successor selector when a block has multiple successors.
This information wasn't necessary until now, when we are about to introduce
outer loop vectorization support in VPlan code gen.
Reviewers: fhahn, rengolin, mkuper, hfinkel, mssimpso
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48814
llvm-svn: 336554
Minor replacement. LLVM_ATTRIBUTE_USED was introduced to silence
a warning but using #ifndef NDEBUG makes more sense in this case.
Reviewers: dblaikie, fhahn, hsaito
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D47498
llvm-svn: 333476
Now that the LLVM_DEBUG() macro landed on the various sub-projects
the DEBUG macro can be removed.
Also change the new uses of DEBUG to LLVM_DEBUG.
Differential Revision: https://reviews.llvm.org/D46952
llvm-svn: 333091
r332654 tried to fix an unused function warning with
a void cast. This approach worked for clang and gcc
but not for MSVC. This commit replaces the void cast
with the LLVM_ATTRIBUTE_USED approach.
llvm-svn: 332910
r332654 was reverted due to an unused function warning in
release build. This commit includes the same code with the
warning silenced.
Differential Revision: https://reviews.llvm.org/D44338
llvm-svn: 332860
The introduced problem is:
llvm.src/lib/Transforms/Vectorize/VPlanVerifier.cpp:29:13: error: unused function 'hasDuplicates' [-Werror,-Wunused-function]
static bool hasDuplicates(const SmallVectorImpl<VPBlockBase *> &VPBlockVec) {
^
llvm-svn: 332747
Patch #3 from VPlan Outer Loop Vectorization Patch Series #1
(RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-December/119523.html).
Expected to be NFC for the current inner loop vectorization path. It
introduces the basic algorithm to build the VPlan plain CFG (single-level
CFG, no hierarchical CFG (H-CFG), yet) in the VPlan-native vectorization
path using VPInstructions. It includes:
- VPlanHCFGBuilder: Main class to build the VPlan H-CFG (plain CFG without nested regions, for now).
- VPlanVerifier: Main class with utilities to check the consistency of a H-CFG.
- VPlanBlockUtils: Main class with utilities to manipulate VPBlockBases in VPlan.
Reviewers: rengolin, fhahn, mkuper, mssimpso, a.elovikov, hfinkel, aprantl.
Differential Revision: https://reviews.llvm.org/D44338
llvm-svn: 332654
