Multiple fixes related to bugs discovered while debugging a crash
when reading all registers on i386.
The underlying problem was that GetSetForNativeRegNum() did not account
for MPX registers on i386, and since it only compared against upper
bounds of each known register set, the MPX registers were classified
into the wrong set and therefore considered supported. However, they
were not expected in RegNumX86ToX86_64() and caused the assertion
to fail.
This includes:
- adding (unused) i386 → x86_64 translations for MPX registers
- fixing GetSetForNativeRegNum() to check both lower and upper bound
for register sets, to avoid wrongly classifying unhandled register
sets
- adding missing range check for MPX registers on i386
- renaming k_last_mpxr to k_last_mpxr_i386 for consistency
- replacing return-assertions with llvm_unreachable() and adding more
checks for unexpected parameters
Differential Revision: https://reviews.llvm.org/D88682
Fix reading FIP/FDP registers to correctly return segment and offset
parts. On amd64, this roughly matches the Linux behavior of splitting
the 64-bit FIP/FDP into two halves, and putting the higher 32 bits
into f*seg and lower into f*off. Well, actually we use only 16 bits
of higher half but the CPUs do not seem to handle more than that anyway.
Differential Revision: https://reviews.llvm.org/D88681
Both of the if-clauses modify the raw_path variable and only one of them
was resetting the variable for the fallback. Avoid future bugs like that
by always resetting the variable.
Differential revision: https://reviews.llvm.org/D88704
lldb's PlatforDarwinKernel scans the local filesystem (well known
locations, plus user-specified directories) for kernels and kexts
when doing kernel debugging, and loads them automatically. Sometimes
kernel developers want to debug with *only* a dSYM, in which case they
give lldb the DWARF binary + the dSYM as a binary and symbol file.
This patch adds code to lldb to do this automatically if that's the
best thing lldb can find.
A few other bits of cleanup in PlatformDarwinKernel that I undertook
at the same time:
1. Remove the 'platform.plugin.darwin-kernel.search-locally-for-kexts'
setting. When I added the local filesystem index at start of kernel
debugging, I thought people might object to the cost of the search
and want a way to disable it. No one has.
2. Change the behavior of
'plugin.dynamic-loader.darwin-kernel.load-kexts' setting so it does
not disable the local filesystem scan, or use of the local filesystem
binaries.
3. PlatformDarwinKernel::GetSharedModule into GetSharedModuleKext and
GetSharedModuleKernel for easier readability & maintenance.
4. Added accounting of .dSYM.yaa files (an archive format akin to tar)
that I come across during the scan. I'm not using these for now; it
would be very expensive to expand the archives & see if the UUID matches
what I'm searching for.
<rdar://problem/69774993>
Differential Revision: https://reviews.llvm.org/D88632
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
Add a missing include and some definitions in 769533216666.
Patch by: Brooks Davis
Reviewed by: labath
Differential Revision: https://reviews.llvm.org/D88453
The destructor must be defined in the implementation class so that it
can be called, as Vedant Kumar pointed out in:
'''
What were your thoughts, re:
+class Trace : public PluginInterface {
+public:
+ ~Trace() override = default;
Does this need to be `virtual ~Trace() = ...`?
Otherwise, when a std::shared_ptr<Trace> is destroyed, the
destructor for the derived TraceIntelPT instance won't run.
'''
This reverts commit f775fe59640a2e837ad059a8f40e26989d4f9831.
I fixed a return type error in the original patch that was causing a test failure.
Also added a REQUIRES: python to the shell test so we'll skip this for
people who build lldb w/o Python.
Also added another test for the error printing.
Add the flag in ProcessMachCore::DoLoadCore that stops additional
searches for the binaries when we have an LC_NOTE identifying the
firmware/standalone binary as the correct one & we have loaded it
successfully.
RegInfoBasedABI::GetRegisterInfoByName was failing because mips/mips64 ABIs
don't use ConstString in their register info array.
Reviewed By: #lldb, teemperor
Differential Revision: https://reviews.llvm.org/D88375
When a Mach-O corefile has an LC_NOTE "main bin spec" for a
standalone binary / firmware, with only a UUID and no load
address, try to locate the binary and dSYM by UUID and if
found, load it at offset 0 for the user.
Add a test case that tests a firmware/standalone corefile
with both the "kern ver str" and "main bin spec" LC_NOTEs.
<rdar://problem/68193804>
Differential Revision: https://reviews.llvm.org/D88282
Every call to the protected SBAddress constructor and the SetAddress
method takes the address of a valid object which means we might as well
pass it as a const reference instead of a pointer and drop the null
check.
Differential revision: https://reviews.llvm.org/D88249
Recently https://reviews.llvm.org/D88103 introduced a nice API for
converting a JSON object into C++ types, which include nice error
messaging.
I'm using that new functioniality to perform the parsing in a much more
elegant way. As a result, the code looks simpler and more maintainable,
as we aren't parsing anymore individual fields manually.
I updated the test cases accordingly.
Differential Revision: https://reviews.llvm.org/D88264
The OS version field is generally not very helpful for non-Darwin
targets. On Linux, it identifies the kernel version which moves
out-of-sync with the userspace. On Windows, this field actually ends up
corresponding to the Visual Studio toolset version instead of the OS
version. Consider non-Darwin targets without an OS version to be fully
specified.
Differential Revision: https://reviews.llvm.org/D88181
Reviewed By: Jonas Devlieghere, Dave Lee
Translating between JSON objects and C++ strutctures is common.
From experience in clangd, fromJSON/ObjectMapper work well and save a lot of
code, but aren't adopted elsewhere at least partly due to total lack of error
reporting beyond "ok"/"bad".
The recently-added error model should be rich enough for most applications.
It requires tracking the path within the root object and reporting local
errors at appropriate places.
To do this, we exploit the fact that the call graph of recursive
parse functions mirror the structure of the JSON itself.
The current path is represented as a linked list of segments, each of which is
on the stack as a parameter. Concretely, fromJSON now looks like:
bool fromJSON(const Value&, T&, Path);
Beyond the signature change, this is reasonably unobtrusive: building
the path segments is mostly handled by ObjectMapper and the vector<T> fromJSON.
However the root caller of fromJSON must now create a Root object to
store the errors, which is a little clunky.
I've added high-level parse<T>(StringRef) -> Expected<T>, but it's not
general enough to be the primary interface I think (at least, not usable in
clangd).
All existing users (mostly just clangd) are updated in this patch,
making this change backwards-compatible is a bit hairy.
Differential Revision: https://reviews.llvm.org/D88103
Add an optimal thread strategy to execute specified amount of tasks.
This strategy should prevent us from creating too many threads if we
occasionaly have an unexpectedly small amount of tasks.
Differential Revision: https://reviews.llvm.org/D87765
When the various methods of locating the module in GetRemoteSharedModule
fail, make sure we pass the original module spec to the bail-out call to
the provided resolver function.
Also make sure we consistently use the resolved module spec from the
various success paths.
Thanks to what appears to have been an accidentally inverted condition
(commit 85967fa applied the new condition to a path where GetModuleSpec
returns false, but should have applied it when GetModuleSpec returns
true), without this fix we only pass the original module spec in the
fallback if the original spec has no uuid (or has a uuid that somehow
matches the resolved module's uuid despite the call to GetModuleSpec
failing). This manifested as a bug when processing a minidump file with
a user-provided sysroot, since in that case the resolver call was being
applied to resolved_module_spec (despite resolution failing), which did
not have the path of its file_spec set.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D88099
Clang has some type sugar that only serves as a way to preserve the way a user
has typed a certain type in the source code. These types are currently not
unwrapped when we query the type name for a Clang type, which means that this
type sugar actually influences what formatters are picked for a certain type.
Currently if a user decides to reference a type by doing `::GlobalDecl Var = 3;`,
the type formatter for `GlobalDecl` will not be used (as the type sugar
around the type gives it the name `::GlobalDecl`. The same goes for other ways
to spell out a type such as `auto` etc.
With this patch most of this type sugar gets stripped when the full type name is
calculated. Typedefs are not getting desugared as that seems counterproductive.
I also don't desugar atomic types as that's technically not type sugar.
Reviewed By: jarin
Differential Revision: https://reviews.llvm.org/D87481
There was a little thinko which meant when stopped in a frame with
debug information but whose CU didn't have any global variables we
report:
no debug info for frame <N>
This patch fixes that error message to say the intended:
no global variables in current compile unit
<rdar://problem/69086361>
This is the first in a series of patches that will adds a new processor trace plug-in to LLDB.
The idea for this first patch to to add the plug-in interface with simple commands for the trace files that can "load" and "dump" the trace information. We can test the functionality and ensure people are happy with the way things are done and how things are organized before moving on to adding more functionality.
Processor trace information can be view in a few different ways:
- post mortem where a trace is saved off that can be viewed later in the debugger
- gathered while a process is running and allow the user to step back in time (with no variables, memory or registers) to see how each thread arrived at where it is currently stopped.
This patch attempts to start with the first solution of loading a trace file after the fact. The idea is that we will use a JSON file to load the trace information. JSON allows us to specify information about the trace like:
- plug-in name in LLDB
- path to trace file
- shared library load information so we can re-create a target and symbolicate the information in the trace
- any other info that the trace plug-in will need to be able to successfully parse the trace information
- cpu type
- version info
- ???
A new "trace" command was added at the top level of the LLDB commmands:
- "trace load"
- "trace dump"
I did this because if we load trace information we don't need to have a process and we might end up creating a new target for the trace information that will become active. If anyone has any input on where this would be better suited, please let me know. Walter Erquinigo will end up filling in the Intel PT specific plug-in so that it works and is tested once we can agree that the direction of this patch is the correct one, so please feel free to chime in with ideas on comments!
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D85705
Update the some examples in the help string for `breakpoint command add`.
Python breakpoint commands have different output than what's shown in the help string.
Notes:
* Removed an example containing an inner function, as it seems more about a Python technique than about `command script add`
* Updated `print x` to `print(x)` to be python 2/3 agnostic
Differential Revision: https://reviews.llvm.org/D87807
Previously when <addr> in "memory region <addr>" didn't
parse correctly, we'd print an error then also ask lldb-server
for a region containing LLDB_INVALID_ADDRESS.
(lldb) memory region not_an_address
error: invalid address argument "not_an_address"...
error: Server returned invalid range
Only send the command to lldb-server if the address
parsed correctly.
(lldb) memory region not_an_address
error: invalid address argument "not_an_address"...
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87694
Perform all error handling in ReadCode()
Add :help text describing “< path”, add extra line before Commands
Differential Revision: https://reviews.llvm.org/D87640
Code was added that used llvm error checking to parse .debug_aranges, but the error check after parsing the DWARFDebugArangesSet was reversed and was causing no error to be returned with no valid address ranges being actually used. This meant we always would fall back onto creating out own address ranges by parsing the compile unit's ranges. This was causing problems for cases where the DW_TAG_compile_unit had a single address range by using a DW_AT_low_pc and DW_AT_high_pc attribute pair (not using a DW_AT_ranges attribute), but the .debug_aranges had correct split ranges. In this case we would end up using the single range for the compile unit that encompassed all of the ranges from the .debug_aranges section and would cause address resolving issues in LLDB where address lookups would fail for certain addresses.
Differential Revision: https://reviews.llvm.org/D87626
Make it possible to run the script command with a different language
than currently selected.
$ ./bin/lldb -l python
(lldb) script -l lua
>>> io.stdout:write("Hello, World!\n")
Hello, World!
When passing the language option and a raw command, you need to separate
the flag from the script code with --.
$ ./bin/lldb -l python
(lldb) script -l lua -- io.stdout:write("Hello, World!\n")
Hello, World!
Differential revision: https://reviews.llvm.org/D86996
qemu calls the "fp" and "lr" registers via their generic names
(x29/x30). This mismatch manifested itself as not being able to unwind
or display values of some local variables.
In MinGW world, UNIX like lib prefix is preferred for the libraries.
This patch adjusts CMake files to do that.
Differential Revision: https://reviews.llvm.org/D87517
On macOS Big Sur the class descriptor contains the NSKVONotifying_
prefix. This is covered by TestDataFormatterObjCKVO.
Differential revision: https://reviews.llvm.org/D87545
This patch adds a way to fetch breakpoint metadatas as a serialized
`Structured` Data format (JSON). This can be used by IDEs to update
their UI when a breakpoint is set or modified from the console.
rdar://11013798
Differential Revision: https://reviews.llvm.org/D87491
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This adds support for substituting std::pair instantiations with enabled
import-std-module.
With the fixes in parent revisions we can currently substitute a single pair
(however, a result that returns a second pair currently causes LLDB to crash
while importing the second template instantiation).
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D85141
The ASTImporter has an `Imported(From, To)` callback that notifies subclasses
that a declaration has been imported in some way. LLDB uses this in the
`CompleteTagDeclsScope` to see which records have been imported into the scratch
context. If the record was declared inside the expression, then the
`CompleteTagDeclsScope` will forcibly import the full definition of that record
to the scratch context so that the expression AST can safely be disposed later
(otherwise we might end up going back to the deleted AST to complete the
minimally imported record). The way this is implemented is that there is a list
of decls that need to be imported (`m_decls_to_complete`) and we keep completing
the declarations inside that list until the list is empty. Every `To` Decl we
get via the `Imported` callback will be added to the list of Decls to be
completed.
There are some situations where the ASTImporter will actually give us two
`Imported` calls with the same `To` Decl. One way where this happens is if the
ASTImporter decides to merge an imported definition into an already imported
one. Another way is that the ASTImporter just happens to get two calls to
`ASTImporter::Import` for the same Decl. This for example happens when importing
the DeclContext of a Decl requires importing the Decl itself, such as when
importing a RecordDecl that was declared inside a function.
The bug addressed in this patch is that when we end up getting two `Imported`
calls for the same `To` Decl, then we would crash in the
`CompleteTagDeclsScope`. That's because the first time we complete the Decl we
remove the Origin tracking information (that maps the Decl back to from where it
came from). The next time we try to complete the same `To` Decl the Origin
tracking information is gone and we hit the `to_context_md->getOrigin(decl).ctx
== m_src_ctx` assert (`getOrigin(decl).ctx` is a nullptr the second time as the
Origin was deleted).
This is actually a regression coming from D72495. Before D72495
`m_decls_to_complete` was actually a set so every declaration in there could
only be queued once to be completed. The set was changed to a vector to make the
iteration over it deterministic, but that also causes that we now potentially
end up trying to complete a Decl twice.
This patch essentially just reverts D72495 and makes the `CompleteTagDeclsScope`
use a SetVector for the list of declarations to be completed. The SetVector
should filter out the duplicates (as the original `set` did) and also ensure that
the completion order is deterministic. I actually couldn't find any way to cause
LLDB to reproduce this bug by merging declarations (this would require that we
for example declare two namespaces in a non-top-level expression which isn't
possible). But the bug reproduces very easily by just declaring a class in an
expression, so that's what the test is doing.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D85648
SemaSourceWithPriorities is a special SemaSource that wraps our normal LLDB
ExternalASTSource and the ASTReader (which is used for the C++ module loading).
It's only active when the `import-std-module` setting is turned on.
The `CompleteType` function there in `SemaSourceWithPriorities` is looping over
all ExternalASTSources and asks each to complete the type. However, that loop is
in another loop that keeps doing that until the type is complete. If that
function is ever called on a type that is a forward decl then that causes LLDB
to go into an infinite loop.
I remember I added that second loop and the comment because I thought I saw a
similar pattern in some other Clang code, but after some grepping I can't find
that code anywhere and it seems the rest of the code base only calls
CompleteType once (It would also be kinda silly to have calling it multiple
times). So it seems that's just a silly mistake.
The is implicitly tested by importing `std::pair`, but I also added a simpler
dedicated test that creates a dummy libc++ module with some forward declarations
and then imports them into the scratch AST context. At some point the
ASTImporter will check if one of the forward decls could be completed by the
ExternalASTSource, which will cause the `SemaSourceWithPriorities` to go into an
infinite loop once it receives the `CompleteType` call.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D87289
This patch removes register set definitions and other redundant code from
NativeRegisterContextLinux/RegisterContextPOSIX*_arm. Register sets are now
moved under RegisterInfosPOSIX_arm which now uses RegisterInfoAndSetInterface.
This is similar to what we earlier did for AArch64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D86962
