Summary: Currenlty BPI unconditionally creates post dominator tree each time. While this is not incorrect we can save compile time by reusing existing post dominator tree (when it's valid) provided by analysis manager.
Reviewers: skatkov, taewookoh, yrouban
Reviewed By: skatkov
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78987
The code assumed that zero-extending the integer constant to the
designated alloc size would be fine even for BE targets, but that's not
the case as that pulls in zeros from the MSB side while we actually
expect the padding zeros to go after the LSB.
I've changed the codepath handling the constant integers to use the
store size for both small(er than u64) and big constants and then add
zero padding right after that.
Differential Revision: https://reviews.llvm.org/D78011
When compiling for a arm5te cpu from clang, the +dsp attribute is set.
This meant we could try and generate qadd8 instructions where we would
end up having no pattern. I've changed the condition here to be hasV6Ops
&& hasDSP, which is what other parts of ARMISelLowering seem to use for
similar instructions.
Fixed PR45677.
Differential Revision: https://reviews.llvm.org/D78877
Follow-up of D78082 (x86-64).
This change avoids dynamic relocations in `xray_instr_map` for ARM/AArch64/powerpc64le.
MIPS64 cannot use 64-bit PC-relative addresses because R_MIPS_PC64 is not defined.
Because MIPS32 shares the same code, for simplicity, we don't use PC-relative addresses for MIPS32 as well.
Tested on AArch64 Linux and ppc64le Linux.
Reviewed By: ianlevesque
Differential Revision: https://reviews.llvm.org/D78590
This patch upstreams support for the Armv8.6-a Matrix Multiplication
Extension. A summary of the features can be found here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
This patch includes:
- Assembly support for AArch32
- Intrinsics Support for AArch32 Neon Intrinsics for Matrix
Multiplication
Note: these extensions are optional in the 8.6a architecture and so have
to be enabled by default
No additional IR types or C Types are needed for this extension.
This is part of a patch series, starting with BFloat16 support and
the other components in the armv8.6a extension (in previous patches
linked in phabricator)
Based on work by:
- Luke Geeson
- Oliver Stannard
- Luke Cheeseman
Reviewers: t.p.northover, miyuki
Reviewed By: miyuki
Subscribers: miyuki, ostannard, kristof.beyls, hiraditya, danielkiss,
cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77872
These tests contain debug instructions which get checked, so we can't
insert synthetic debug info and expect the tests to pass.
The rest of the ARM backend tests appear to be fair game.
This adds some extra processing into the Pre-RA ARM load/store optimizer
to detect and merge MVE loads/stores and adds of the same base. This we
don't always turn into a post-inc during ISel, and due to the nature of
it being a graph we don't always know an order to use for the nodes, not
knowing which nodes to make post-inc and which to use the new post-inc
of. After ISel, we have an order that we can use to post-inc the
following instructions.
So this looks for a loads/store with a starting offset of 0, and an
add/sub from the same base, plus a number of other loads/stores. We then
do some checks and convert the zero offset load/store into a postinc
variant. Any loads/stores after it have the offset subtracted from their
immediates. For example:
LDR #4 LDR #4
LDR #0 LDR_POSTINC #16
LDR #8 LDR #-8
LDR #12 LDR #-4
ADD #16
It only handles MVE loads/stores at the moment. Normal loads/store will
be added in a followup patch, they just have some extra details to
ensure that we keep generating LDRD/LDM successfully.
Differential Revision: https://reviews.llvm.org/D77813
The logic in ARMParallelDSP is setup to merge two 16-bits loads into
a 32-bit load and feed them into the smlads. This requires that four
loads are combined for the four inputs, but there wasn't actually a
check for this.
Differential Revision: https://reviews.llvm.org/D78492
BreakPHIEdge would be set based on whether the instruction needs to
insert a new critical edge to allow sinking into a block where the uses
are PHI nodes. But for instructions with multiple defs it would be reset
on the second def, allowing the instruciton to sink where it should not.
Fixes PR44981
Differential Revision: https://reviews.llvm.org/D78087
Summary:
The INLINEASM MIR instructions use immediate operands to encode the values of some operands.
The MachineInstr pretty printer function already handles those operands and prints human readable annotations instead of the immediates. This patch adds similar annotations to the output of the MIRPrinter, however uses the new MIROperandComment feature.
Reviewers: SjoerdMeijer, arsenm, efriedma
Reviewed By: arsenm
Subscribers: qcolombet, sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78088
Summary:
No error or warning is emitted when specific reserved registers are
written to in inline assembly. Therefore, writes to the program counter
or to the frame pointer, for instance, were permitted, which could have
led to undesirable behaviour.
Example:
int foo() {
register int a __asm__("r7"); // r7 = frame-pointer in M-class ARM
__asm__ __volatile__("mov %0, r1" : "=r"(a) : : );
return a;
}
In contrast, GCC issues an error in the same scenario.
This patch detects writes to specific reserved registers in inline
assembly for ARM and emits an error in such case. The detection works
for output and input operands. Clobber operands are not handled here:
they are already covered at a later point in
AsmPrinter::emitInlineAsm(const MachineInstr *MI). The registers
covered are: program counter, frame pointer and base pointer.
This is ARM only. Therefore the implementation of other targets'
counterparts remain open to do.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76848
Previously, getWithOffset() would drop the offset if the base was null.
Because of this, MachineMemOperand would return the wrong result from
getAlign() in these cases. MachineMemOperand stores the alignment of
the pointer without the offset.
A bunch of MIR tests changed because we print the offset now.
Split off from D77687.
Differential Revision: https://reviews.llvm.org/D78049
The change introduces the usage of physical registers for non-gc deopt values.
This require runtime support to know how to take a value from register.
By default usage is off and can be switched on by option.
The change also introduces additional fix-up patch which forces the spilling
of caller saved registers (clobbered after the call) and re-writes statepoint
to use spill slots instead of caller saved registers.
Reviewers: reames, danstrushin
Reviewed By: dantrushin
Subscribers: mgorny, hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D77797
Summary:
This fixes PR45302.
Previously the case
BB1
/ \
| |
TBB FBB
| |
\ /
BB2
was treated as a valid diamond also when TBB and FBB was the same basic
block. This then lead to a failed assertion in IfConvertDiamond.
Since TBB == FBB is quite a degenerated case of a diamond, we now
don't treat it as a valid diamond anymore, and thus we will avoid the
trouble of making IfConvertDiamond handle it correctly.
Reviewers: efriedma, kparzysz
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77651
This patch adds an analysis of the offset addresses used by gathers
and scatters to the MVEGatherScatterLowering pass to find
multiplications and additions that are loop invariant and thus can
be moved into the loop preheader, avoiding to execute them each time.
Differential Revision: https://reviews.llvm.org/D76681
Currently when the target is big-endian vmov.i64 reverses the order of the two
words of the vector. This is correct only when the underlying element type is
32-bit, as actually what it should be doing is considering it a vector of the
underlying type and reversing the elements of that.
Differential Revision: https://reviews.llvm.org/D76515
If we have an element-wise vmov immediate instruction then a subsequent vrev
with width greater or equal to the vmov element width, then that vrev won't do
anything. Add a DAG combine to convert bitcasts that would become such vrevs
into vector_reg_casts instead.
Differential Revision: https://reviews.llvm.org/D76514
Move ARM ConstantIsland and LowOverheadLopps passes later in the pipeline
such that they will be run after the upcoming Machine Outlining pass.
Differential Revision: https://reviews.llvm.org/D76065
When optimising for code size at the expense of performance, it is often
worth saving and restoring some of r0-r3, if IPRA will be able to take
advantage of them. This doesn't cost any extra code size if we already
have a PUSH/POP pair, and increases the number of available registers
across any calls to the function.
We already have an optimisation which tries fold the subtract/add of the
SP into the PUSH/POP by using extra registers, which somewhat conflicts
with this. I've made the new optimisation less aggressive in cases where
the existing one is likely to trigger, which gives better results than
either of these optimisations by themselves.
Differential revision: https://reviews.llvm.org/D69936
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not frozen, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not freezed, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: danielkiss, alanphipps, hans, nathanchance, nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
On some Arm cores there is a performance penalty when forwarding from an
S register to a D register. Calculating VMAX in a D register creates
false forwarding hazards, so don't do that unless we're on a core which
specifically asks for it.
Patch by James Greenhalgh
Differential Revision: https://reviews.llvm.org/D75248
The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
This patch upstreams support for the ARM Armv8.1m cpu Cortex-M55.
In detail adding support for:
- mcpu option in clang
- Arm Target Features in clang
- llvm Arm TargetParser definitions
details of the CPU can be found here:
https://developer.arm.com/ip-products/processors/cortex-m/cortex-m55
Reviewers: chill
Reviewed By: chill
Subscribers: dmgreen, kristof.beyls, hiraditya, cfe-commits,
llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74966
The alias analysis in DAG Combine looks at the BaseAlign, the Offset and
the Size of two accesses, and determines if they are known to access
different parts of memory by the fact that they are different offsets
from inside that "alignment window". It does not seem to account for
accesses that are not a multiple of the size, and may overflow from one
alignment window into another.
For example in the test case we have a 19byte memset that is splits into
a 16 byte neon store and an unaligned 4 byte store with a 15 byte
offset. This 15byte offset (with a base align of 8) wraps around to the
next alignment windows. When compared to an access that is a 16byte
offset (of the same 4byte size and 8byte basealign), the two accesses
are said not to alias.
I've fixed this here by just ensuring that the offsets are a multiple of
the size, ensuring that they don't overlap by wrapping. Fixes PR45035,
which was exposed by the UseAA changes in the arm backend.
Differential Revision: https://reviews.llvm.org/D75238
