This will make it possible for tablegen to make subtarget
dependent decisions without adding new arguments to every
target.
---------
Co-authored-by: Sergei Barannikov <barannikov88@gmail.com>
In 236f938ef, I introduced a generic version of this routine. I believe
that the SystemZ specific version of this is less general than the
generic version, and is thus unrequired. I wasn't 100% given the
difference in sub-register, multiple use and defs, but from the SystemZ
code, it looks like those cases simply don't arise?
As part of an effort to enable instr-ref-based debug value tracking,
this PR implements `SystemZInstrInfo::isLoadFromStackSlotPostFE`, as
well as `SystemZInstrInfo::isStoreToStackSlotPostFE`. The implementation
relies upon the presence of MachineMemoryOperands on the relevant
`MachineInstr`s in order to access the `FrameIndex` post frame index
elimination.
Since these new functions are only meant to be called after frame-index
elimination, they assert against the present of a frame index on the
base register operand of the instruction.
Outside of the utility of these functions to enable instr-ref-based
debug value tracking, they also changes the behavior of the AsmPrinter,
since it will now be able to properly detect non-folded spills and
reloads, so this changes a number of tests that were checking
specifically for folded reloads.
Note that there are some tests that still check for `vst` and `vl` as
folded spills/reloads even though they should be straight reloads. This
will be addressed in a future PR.
Co-authored-by: Dominik Steenken <dominik.steenken@gmail.com>
As a first step toward implementing SystemZ support for instr-ref-based
debug info tracking, this commit adds a basic implementation for the
previously absent `SystemZInstrInfo::isCopyInstrImpl`.
This is accomplished by adding a new flag called `isMoveReg` on the
relevant instructions and calling upon that bit of information to
implement the function. Which instructions to add the flag to was based
on the implementation of `SystemZInstrInfo::copyPhysReg`. The full list
of instructions is as follows:
#### General-Purpose Registers
- `lr`
- `lgr`
#### Floating Point Registers
- `ler`
- `ldr`
- `lxr`
#### Vector Registers
- `vlr`
NVPTX, SPIRV, and WebAssembly pass virtual registers to this function
since they don't perform register allocation. We need to use Register to
avoid a virtual register being converted to MCRegister by the caller.
This patch is in preparation to enable setting the MachineInstr::MIFlag
flags, i.e. FrameSetup/FrameDestroy, on callee saved register
spill/reload instructions in prologue/epilogue. This eventually helps in
setting the prologue_end and epilogue_begin markers more accurately.
The DWARF Spec in "6.4 Call Frame Information" says:
The code that allocates space on the call frame stack and performs the
save
operation is called the subroutine’s prologue, and the code that
performs
the restore operation and deallocates the frame is called its epilogue.
which means the callee saved register spills and reloads are part of
prologue (a.k.a frame setup) and epilogue (a.k.a frame destruction),
respectively. And, IIUC, LLVM backend uses FrameSetup/FrameDestroy flags
to identify instructions that are part of call frame setup and
destruction.
In the trunk, while most targets consistently set
FrameSetup/FrameDestroy on save/restore call frame information (CFI)
instructions of callee saved registers, they do not consistently set
those flags on the actual callee saved register spill/reload
instructions.
I believe this patch provides a clean mechanism to set
FrameSetup/FrameDestroy flags on the actual callee saved register
spill/reload instructions as needed. And, by having default argument of
MachineInstr::NoFlags for Flags, this patch is a NFC.
With this patch, the targets have to just pass FrameSetup/FrameDestroy
flag to the storeRegToStackSlot/loadRegFromStackSlot calls from the
target derived spillCalleeSavedRegisters and restoreCalleeSavedRegisters
to set those flags on callee saved register spill/reload instructions.
Also, this patch makes it very easy to set the source line information
on callee saved register spill/reload instructions which is needed by
the DwarfDebug.cpp implementation to set prologue_end and epilogue_begin
markers more accurately.
As per DwarfDebug.cpp implementation:
prologue_end is the first known non-DBG_VALUE and non-FrameSetup
location
that marks the beginning of the function body
epilogue_begin is the first FrameDestroy location that has been seen in
the
epilogue basic block
With this patch, the targets have to just do the following to set the
source line information on callee saved register spill/reload
instructions, without hampering the LLVM's efforts to avoid adding
source line information on the artificial code generated by the
compiler.
<Foo>InstrInfo::storeRegToStackSlot() {
...
DebugLoc DL =
Flags & MachineInstr::FrameSetup ? DebugLoc() : MBB.findDebugLoc(I);
...
}
<Foo>InstrInfo::loadRegFromStackSlot() {
...
DebugLoc DL =
Flags & MachineInstr::FrameDestroy ? MBB.findDebugLoc(I) : DebugLoc();
...
}
While I understand this patch would break out-of-tree backend builds, I
think it is in the right direction.
One immediate use case that can benefit from this patch is fixing
#120553 becomes simpler.
The renamable flag is useful during MachineCopyPropagation but renamable
flag will be dropped after lowerCopy in some case.
This patch introduces extra arguments to pass the renamable flag to
copyPhysReg.
This reverts commit a415b4dfcc02e3e82b8c8a7836f7c04b9d65dc9b.
Modify the instruction in place to transform it into a REG_SEQUENCE,
which is what other implementations of foldImmediate do. Also start
erasing the def instruction if there are no other uses.
Fixes#91110.
If materializing a constant in a vector register that is just
going to be copied to general registers, directly materialize
the immediate in the gpr. This will avoid a few lit test regressions
in a future commit.
Enable MachineCombining for FP add, sub and mul.
In order for this to work, the default instruction selection of reg/mem opcodes is disabled for ISD nodes that carry the flags that allow reassociation. The reg/mem folding is instead done after MachineCombiner by PeepholeOptimizer. SystemZInstrInfo optimizeLoadInstr() and foldMemoryOperandImpl() ("LoadMI version") have been implemented for this purpose also by this patch.
This patch adds support for the ADA (associated data area), doing the following:
-Creates the ADA table to handle displacements
-Emits the ADA section in the SystemZAsmPrinter
-Lowers the ADA_ENTRY node into the appropriate load instruction
Differential Revision: https://reviews.llvm.org/D153788
- Creates the ADA table to handle displacements
- Emits the ADA section in the SystemZAsmPrinter
- Lowers the ADA_ENTRY node into the appropriate load instruction
Differential Revision: https://reviews.llvm.org/D153788
With D134950, targets get notified when a virtual register is created and/or
cloned. Targets can do the needful with the delegate callback. AMDGPU propagates
the virtual register flags maintained in the target file itself. They are useful
to identify a certain type of machine operands while inserting spill stores and
reloads. Since RegAllocFast spills the physical register itself, there is no way
its virtual register can be mapped back to retrieve the flags. It can be solved
by passing the virtual register as an additional argument. This argument has no
use when the spill interfaces are called during the greedy allocator or even the
PrologEpilogInserter and can pass a null register in such cases.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D138656
When e.g. a VR64 register is spilled to a stack slot requiring a long
(20-bit) displacement, it is possible to use an FP opcode if the allocated
phys reg allows it. This eliminates the use of a separate LAY instruction.
Reviewed By: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D115406
By reordering the objects on the stack frame after looking at the users, a
better utilization of displacement operands will result. This means less
needed Load Address instructions for the accessing of these objects.
This is important for very large functions where otherwise small changes
could cause a lot more/less accesses go out of range.
Note: this is not yet enabled for SystemZXPLINKFrameLowering, but should be.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D115690
Delegate updating of LiveIntervals to each target's
convertToThreeAddress implementation, instead of repairing LiveIntervals
after the fact in TwoAddressInstruction::convertInstTo3Addr.
Differential Revision: https://reviews.llvm.org/D113493
This patch adds support for symbolic displacements, e.g. like 'lg %r0,
sym(%r1)', which is done using relocations. This is needed to compile the
kernel without disabling the integrated assembler.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D113341
This simplifies the API and addresses a FIXME in
TwoAddressInstructionPass::convertInstTo3Addr.
Differential Revision: https://reviews.llvm.org/D110229
The backend generally uses 64-bit immediates (e.g. what
MachineOperand::getImm() returns), so use that for analyzeCompare()
and optimizeCompareInst() as well. This avoids truncation for
targets that support immediates larger 32-bit. In particular, we
can avoid the bugprone value normalization hack in the AArch64
target.
This is a followup to D108076.
Differential Revision: https://reviews.llvm.org/D108875
Swap the compare operands if LHS is spilled while updating the CCMask:s of
the CC users. This is relatively straight forward since the live-in lists for
the CC register can be assumed to be correct during register allocation
(thanks to 659efa2).
Also fold a spilled operand of an LOCR/SELR into an LOC(G).
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D67437
In GlobalISel we may in some unfortunate circumstances generate PHIs with
operands that are on separate banks. If-conversion doesn't currently check for
that case and ends up generating a CSEL on AArch64 with incorrect register
operands.
Differential Revision: https://reviews.llvm.org/D72961
It was recently discovered that the handling of CC values was actually broken
since overflow was not properly handled ('nsw' flag not checked for).
Add and sub instructions now have a new target specific instruction flag
named SystemZII::CCIfNoSignedWrap. It means that the CC result can be used
instead of a compare with 0, but only if the instruction has the 'nsw' flag
set.
This patch also adds the improvements of conversion to logical instructions
and the analyzing of add with immediates, to be able to eliminate more
compares.
Review: Ulrich Weigand
https://reviews.llvm.org/D66868
Now that the machine verifier will check for cases of register/immediate
MachineOperands and their correspondence to the MC instruction descriptor,
this patch adds the operand types to the descriptors where they were
previously missing. All MCOI::OPERAND_UNKNOWN operand types have been handled
to get a known type, except for G_... (global isel) instructions.
Review: Ulrich Weigand
https://reviews.llvm.org/D71494
SystemZExpandPseudo:s only job was to expand LOCRMux instructions into jump
sequences. This needs to be done if expandLOCRPseudo() or expandSELRPseudo()
fails to find a legal opcode (all registers "high" or "low"). This task has
now been moved to SystemZPostRewrite while removing the SystemZExpandPseudo
pass.
It is in fact preferred to expand these pseudos directly after register
allocation in SystemZPostRewrite since the hinted register combinations are
then not subject to later optimizations.
Review: Ulrich Weigand
https://reviews.llvm.org/D67432
llvm-svn: 371959
Handle the remaining cases also by handling asm goto in
SystemZInstrInfo::getBranchInfo().
Review: Ulrich Weigand
https://reviews.llvm.org/D67151
llvm-svn: 371048
This patch series adds support for the next-generation arch13
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Assembler/disassembler support for new instructions.
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of arch13 as host processor.
Note: No currently available Z system supports the arch13
architecture. Once new systems become available, the
official system name will be added as supported -march name.
llvm-svn: 365932
This patch aims to reduce spilling and register moves by using the 3-address
versions of instructions per default instead of the 2-address equivalent
ones. It seems that both spilling and register moves are improved noticeably
generally.
Regalloc hints are passed to increase conversions to 2-address instructions
which are done in SystemZShortenInst.cpp (after regalloc).
Since the SystemZ reg/mem instructions are 2-address (dst and lhs regs are
the same), foldMemoryOperandImpl() can no longer trivially fold a spilled
source register since the reg/reg instruction is now 3-address. In order to
remedy this, new 3-address pseudo memory instructions are used to perform the
folding only when the dst and lhs virtual registers are known to be allocated
to the same physreg. In order to not let MachineCopyPropagation run and
change registers on these transformed instructions (making it 3-address), a
new target pass called SystemZPostRewrite.cpp is run just after
VirtRegRewriter, that immediately lowers the pseudo to a target instruction.
If it would have been possibe to insert a COPY instruction and change a
register operand (convert to 2-address) in foldMemoryOperandImpl() while
trusting that the caller (e.g. InlineSpiller) would update/repair the
involved LiveIntervals, the solution involving pseudo instructions would not
have been needed. This is perhaps a potential improvement (see Phabricator
post).
Common code changes:
* A new hook TargetPassConfig::addPostRewrite() is utilized to be able to run a
target pass immediately before MachineCopyPropagation.
* VirtRegMap is passed as an argument to foldMemoryOperand().
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D60888
llvm-svn: 362868
Summary:
The basic idea here is to make it possible to use
MachineInstr::mayAlias also when the MachineInstr
is const (or the "Other" MachineInstr is const).
The addition of const in MachineInstr::mayAlias
then rippled down to the need for adding const
in several other places, such as
TargetTransformInfo::getMemOperandWithOffset.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, MatzeB, arsenm, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60856
llvm-svn: 358744
The IPM sequence currently generated to compute the strcmp/memcmp
result will return INT_MIN for the "less than zero" case. While
this is in compliance with the standard, strictly speaking, it
turns out that common applications cannot handle this, e.g. because
they negate a comparison result in order to implement reverse
compares.
This patch changes code to use a different sequence that will result
in -2 for the "less than zero" case (same as GCC). However, this
requires that the two source operands of the compare instructions
are inverted, which breaks the optimization in removeIPMBasedCompare.
Therefore, I've removed this (and all of optimizeCompareInstr), and
replaced it with a mostly equivalent optimization in combineCCMask
at the DAGcombine level.
llvm-svn: 353304
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
During post-RA pseudo expansion, an 'undef' flag of the source operand should
be propagated by emitGRX32Move().
Review: Ulrich Weigand
llvm-svn: 292353
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
llvm-svn: 288028
Post-RA sched strategy and scheduling instruction annotations for z196, zEC12
and z13.
This scheduler optimizes decoder grouping and balances processor resources
(including side steering the FPd unit instructions).
The SystemZHazardRecognizer keeps track of the scheduling state, which can
be dumped with -debug-only=misched.
Reviers: Ulrich Weigand, Andrew Trick.
https://reviews.llvm.org/D17260
llvm-svn: 284704
