This was exposed by 14e3650f. The recommit of 14e3650f will hit the
problematic code path requiring the workaround.
test case that crashes without the workaround.
During skeleton construction for the epilogue vector loop, generic
helpers use getOrCreateTripCount, which will re-expand the trip count
computation. Instead, re-use the TripCount created during main loop
vectorization.
This reverts the revert commit 2760cdc9c6.
This version pulls in the code to create the vector loop object in VPlan
from D121624.
This is needed because otherwise existing LoopInfo verification will
fail, as a loop block doesn't have in-loop successors now that we
do not replace the branch.
Now that we do not add new loops during skeleton construction, there's
also no need to verify LI there.
The only remaining use was to get the exit block of the loop. Instead of
relying on the loop, use the successor of VectorHeaderBB
(LoopMiddleBlock) directly to set VPTransformState::CFG::ExitB
Depends on D121621.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D121623
When MaximizeVectorBandwidth is enabled, we can end up (via calls to
collectUniformsAndScalars/setCostBasedWideningDecision through
calculateRegisterUsage) making widening decisions before we have decided
whether to fold the tail by masking. These decisions will be wrong if we
later decided to fold the tail, for example when the trip count is very
low. It will use incorrect costs for loads that should get masked, using
standard memory operation costs instead.
This still at the moment uses the EmulatedMaskMemRefHack costs (a bit
unfortunately), but the old costs without this change were 1, leading to
too optimistic vectorization.
This slightly changes the way that the MaximizeVectorBandwidth option
works to make it easier to test, always honouring the option if it is
set.
Differential Revision: https://reviews.llvm.org/D120215
In some case, like in the added test case, we can reach
selectInterleaveCount with loops that actually have a cost of 0.
Unfortunately a loop cost of 0 is also used to communicate that the cost
has not been computed yet. To resolve the crash, bail out if the cost
remains zero after computing it.
This seems like the best option, as there are multiple code paths that
return a cost of 0 to force a computation in selectInterleaveCount.
Computing the cost at multiple places up front there would unnecessarily
complicate the logic.
Fixes#54413.
This patch moves the code to set the correct incoming block for the
backedge value to VPlan::execute.
When generating the phi node, the backedge value is temporarily added
using the pre-header as incoming block. The invalid phi node will be
fixed up during VPlan::execute after main VPlan code generation.
At the same time, the backedge value is also moved to the latch.
This change removes the requirement to create the latch block up-front
for VPWidenInductionPHIRecipe::execute, which in turn will enable
modeling the pre-header in VPlan.
Depends on D121617.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D121618
This patch moves the code to set the correct incoming block for the
backedge value to VPlan::execute.
When generating the phi node, the backedge value is temporarily added
using the pre-header as incoming block. The invalid phi node will be
fixed up during VPlan::execute after main VPlan code generation.
At the same time, the backedge value is also moved to the latch.
This change removes the requirement to create the latch block up-front
for VPWidenIntOrFpInductionRecipe::execute, which in turn will enable
modeling the pre-header in VPlan.
As an alternative, the increment could be modeled as separate recipe,
but that would require more work and a bit of redundant code, as we need
to create the step-vector during VPWidenIntOrFpInductionRecipe::execute
anyways, to create the values for different parts.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D121617
Update all places that currently assume the entry block to the plan is
also the vector loop header to use getVectorLoopRegion instead.
getVectorLoopRegion will keep doing the right thing when the pre-header
is modeled explicitly (and becomes the new entry block in the plan).
This patch moves pointer induction handling from VPWidenPHIRecipe to its
own recipe. In the process, it adds all information required to generate
code for pointer inductions without relying on Legal to access the list
of induction phis.
Alternatively VPWidenPHIRecipe could also take an optional pointer to InductionDescriptor.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D121615
createInductionResumeValues only uses its loop argument only to get the
pre-header, but the pre-header is already known (we created/cached it
earlier). Remove the unneeded loop argument.
completeLoopSkeleton only uses its loop argument only to get the
pre-header, but the pre-header is already known (we created/cached it
earlier). Remove the unneeded loop argument.
Update functions that previously took a loop pointer but only to get the
pre-header. Instead, pass the block directly. This removes the
requirement for the loop object to be created up-front.
This uses the existing VPlan helpers to check whether there are scalar
uses of a phi recipe. It remove one of the few remaining dependencies on
the cost model from VPlan code generation.
Depends on D121612.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D121613
This patch ensures scalars (except for uniforms) are no
longer collected (prior to LVP planning phase) for
scalable vectorization.
This is to avoid the chances of generating scalarized
instructions later (during LVP execute phase) as they
are not supported for scalable vectorization.
Relevant test has also been added.
Differential Revision: https://reviews.llvm.org/D121452
Update places still referencing LoopVectorBody to use the vector loop to
get the vector loop header. This is needed to move vector loop
code-generation to VPlan completely, which in turn is needed to model
pre-header & exit blocks in VPlan as well.
The insertion point for the builder used during VPlan code generation is
set during code generation. Setting the insert point here is dead code
and can be removed.
This patch is a follow-up to D115953. It updates optimizeInductions
to also introduce new VPScalarIVStepsRecipes if an IV has both vector
and scalar uses.
It updates all uses that only need scalar values to use the newly
created recipe for the scalar steps.
This completes untangling of VPWidenIntOrFpInductionRecipe
code-generation. Now the recipe *only* creates the widened vector
values, as it says on the tin.
The code to genereate IR has been moved directly to
VPWidenIntOrFpInductionRecipe::execute.
Note that the recipe has been updated to hold a reference to
ScalarEvolution, which is needed to expand the step, until we can place
the corresponding SCEV expansion in the pre-header.
Depends on D120827.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D120828
The analysis passes output function name encapsulated in `'` braces,
but LV uses `"`. Harmonizing this may help in creating an update script
for the LV costmodel test checks.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D121105
Instead of relying on underlying instructions, this patch updates
VPScalarIVStepsRecipe to only store the required type information.
This removes access to unrelated information, as well as avoiding issues
with the same underlying instruction being shared by multiple recipes.
This change should only change the debug output and not cause any
codegen changes, hence NFCI.
This reverts the revert commit ff93260bf6bddfbad1fa65c4d5184988885b900f.
The underlying issue causing the PPC bot failures has been fixed in
cbaac1473403 and a corresponding test case has been added in
ad2cad1c521c.
Original message:
This patch adds a new VPScalarIVStepsRecipe to handle building scalar
steps.
In the first patch, it only handles the case where there is no vector
induction variable needed.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D115953
This patch adds a new VPScalarIVStepsRecipe to handle building scalar
steps.
In the first patch, it only handles the case where there is no vector
induction variable needed.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D115953
This patch adds a new transform to remove dead recipes. For now, it only
removes dead recipes in the header, to keep the number tests that require
updating manageable. Future patches will extend this to remove dead
recipes across the whole plan.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D118051
Extends getReductionOpChain to look through Phis which may be part of
the reduction chain. adjustRecipesForReductions will now also create a
CondOp for VPReductionRecipe if the block is predicated and not only if
foldTailByMasking is true.
Changes were required in tryToBlend to ensure that we don't attempt
to convert the reduction Phi into a select by returning a VPBlendRecipe.
The VPReductionRecipe will create a select between the Phi and the reduction.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D117580
Note that this doesn't actually cause the top level predicate to become a non-union just yet.
The * above comes from a case in the LoopVectorizer where a predicate which is later proven no longer blocks vectorization due to a change from checking if predicates exists to whether the predicate is possibly false.
This reverts commit 77a0da926c9ea86afa9baf28158d79c7678fc6b9 as we've
received multiple reports of this significantly impacting performance,
in ways that don't seem to just be target specific cost models going
wrong. I would offer some reproducers, but the test changes here seem to
be full of them!
Reverting for now and hopefully we can remove the "hack" more carefully
as we go.
Move out the induction step creation from emitTransformedIndex to the
callers. In some places (e.g. widenIntOrFpInduction) the step is already
created. Passing the step in ensures the steps are kept in sync.
This makes the function independent of shared state in ILV (ensures no
new dependencies on things like the cost model are introduced) and allows
for use directly in recipe's ::execute functions.
The vectorizer will choose at times to "vectorize" loops with a scalar
factor (VF=1) with interleaving (IC > 1). This can occasionally produce
better code than the unroller (notable for reductions where it can
produce independent reduction chains that are combined after the loop).
At times this is not very beneficial though, for example when runtime
checks are needed or when the scalar code requires predication.
This addresses the second point, preventing the vectorizer from
interleaving when the scalar loop will require predication. This
prevents it from making a bit of a mess, that is worse than the original
and better left for the unroller to unroll if beneficial. It helps
reverse some of the regressions from D118090.
Differential Revision: https://reviews.llvm.org/D118566
D43208 extracted `useEmulatedMaskMemRefHack()` from legality into cost model.
What it essentially does is prevents scalarized vectorization of masked memory operations:
```
// TODO: Cost model for emulated masked load/store is completely
// broken. This hack guides the cost model to use an artificially
// high enough value to practically disable vectorization with such
// operations, except where previously deployed legality hack allowed
// using very low cost values. This is to avoid regressions coming simply
// from moving "masked load/store" check from legality to cost model.
// Masked Load/Gather emulation was previously never allowed.
// Limited number of Masked Store/Scatter emulation was allowed.
```
While i don't really understand about what specifically `is completely broken`
was talking about, i believe that at least on X86 with AVX2-or-later,
this is no longer true. (or at least, i would like to know what is still broken).
So i would like to follow suit after D111460, and like wise disable that hack for AVX2+.
But since this was added for X86 specifically, let's just instead completely remove this hack.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D114779
In scalarizeInstruction(), isUniformAfterVectorization is used to detect
cases where it is sufficient to always access the first lane. This
should map directly checking whether the operand is a uniform replicate
recipe.
Differential Revision: https://reviews.llvm.org/D116654
When the main loop is e.g. VF=vscale x 1 and the epilogue VF cannot
be any smaller, the vectorizer should try to estimate how many lanes are
executed at runtime and allow a suitable fixed-width VF to be chosen. It
can use VScaleForTuning to figure out what a suitable fixed-width VF could
be. For the case where the main loop VF is VF=vscale x 1, and VScaleForTuning=8,
it could still choose an epilogue VF upto VF=4.
This was a bit tricky to test, so this patch also introduces a wrapper
function to get 'VScaleForTuning' by also considering vscale_range.
If min and max are equal, then that will be the vscale we compile for.
It makes little sense to tune for a different width if the code
will not be portable for other widths.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D118709
For some reason we limited the epilogue VF to be fixed-width, but there
is not necessarily a reason for doing so. If the main VF=vscale x 16, the
epilogue VF could be either fixed-width, or a scalable VF upto vscale x 8.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D118688
