MSG_DEALLOC_VGPRS slows down very small waveslot limited kernels. It's
been identified this message is only really needed for VGPR limited
kernels. A kernel becomes VGPR limited if a total number of VGPRs per
SIMD / number of used VGPRs is more than a number of wave slots.
This reverts commit adaff46d087799072438dd744b038e6fd50a2d78.
Drop the -O3 checks from default-attributes.hip. I don't know why they
are different on some bots but reverting this is far too disruptive.
Removing it from the codegen pipeline induces a lot of test churn
because llc is no longer optimizing out implicit arguments to kernels.
Mostly mechanical, but there are some creative test updates. I preferred
to take the changes as-is in tests where the ABI isn't relevant. In
cases where it's more relevant, or the optimize out logic was too
ingrained in the test, I pre-run the optimization. Some cases manually
add attributes to disable inputs.
Allow for multiple uses of an operand where each instruction can be
promoted to SDWA.
For instance:
; v_and_b32 v2, lit(0x0000ffff), v2
; v_and_b32 v3, 6, v2
; v_and_b32 v2, 1, v2
Can be folded to:
; v_and_b32 v3, 6, sel_lo(v2)
; v_and_b32 v2, 1, sel_lo(v2)
Similar to 806761a7629df268c8aed49657aeccffa6bca449.
For IR files without a target triple, -mtriple= specifies the full
target triple while -march= merely sets the architecture part of the
default target triple, leaving a target triple which may not make sense,
e.g. amdgpu-apple-darwin.
Therefore, -march= is error-prone and not recommended for tests without
a target triple. The issue has been benign as we recognize
$unknown-apple-darwin as ELF instead of rejecting it outrightly.
This patch changes AMDGPU tests to not rely on the default
OS/environment components. Tests that need fixes are not changed:
```
LLVM :: CodeGen/AMDGPU/fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fabs.ll
LLVM :: CodeGen/AMDGPU/floor.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.ll
LLVM :: CodeGen/AMDGPU/r600-infinite-loop-bug-while-reorganizing-vector.ll
LLVM :: CodeGen/AMDGPU/schedule-if-2.ll
```
SIInsertWaitcnts inserts waitcnt instructions to resolve data
dependencies. The GFX10+ vscnt (VMEM store count) counter is never used
in this way. It is only used to resolve memory dependencies, and that is
handled by SIMemoryLegalizer. Hence there is no need to conservatively
wait for vscnt to be 0 on function entry and before returns.
Differential Revision: https://reviews.llvm.org/D153537
If the dividend has leading zeros, we can use them to reduce the
size of the multiplier and avoid the fixup cases.
This patch is for scalars only, but we might be able to do this
for vectors in a follow up.
Differential Revision: https://reviews.llvm.org/D140750
If we can not prove that f16 operands of a buildvector are canonicalized, then we can not lower into a V_PACK. In this scenario, we would previously lower into some combination of and(sdwa), shr, or. This patch allows for matching into V_PERM instead.
Change-Id: Ifa4a74fdb81ef44f22ba490c7fdf81ec8aebc945
This patch allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits in cases where the ISD::SRL source operand has other uses, enabling us to peek through the shifted value if we don't demand all the bits/elts.
This is another step towards removing SelectionDAG::GetDemandedBits and just using TargetLowering::SimplifyMultipleUseDemandedBits.
There a few cases where we end up with extra register moves which I think we can accept in exchange for the increased ILP.
Differential Revision: https://reviews.llvm.org/D77804
Add GFX11 test coverage to a bunch of tests where it was easy to do so,
mostly because the checks are autogenerated and/or GFX11 can share the
same checks as GFX10.
Differential Revision: https://reviews.llvm.org/D129295
Fold immediates regardless of how many uses they have. This is expected
to increase overall code size, but decrease register usage.
Differential Revision: https://reviews.llvm.org/D114644
Previously SIFoldOperands::foldInstOperand would only fold a
non-inlinable immediate into a single user, so as not to increase code
size by adding the same 32-bit literal operand to many instructions.
This patch removes that restriction, so that a non-inlinable immediate
will be folded into any number of users. The rationale is:
- It reduces the number of registers used for holding constant values,
which might increase occupancy. (On the other hand, many of these
registers are SGPRs which no longer affect occupancy on GFX10+.)
- It reduces ALU stalls between the instruction that loads a constant
into a register, and the instruction that uses it.
- The above benefits are expected to outweigh any increase in code size.
Differential Revision: https://reviews.llvm.org/D114643
Otherwise we have garbage in the upper bits that can affect the
results of the UREM.
Fixes PR55296.
Differential Revision: https://reviews.llvm.org/D125076
Currently the return address ABI registers s[30:31], which fall in the call
clobbered register range, are added as a live-in on the function entry to
preserve its value when we have calls so that it gets saved and restored
around the calls.
But the DWARF unwind information (CFI) needs to track where the return address
resides in a frame and the above approach makes it difficult to track the
return address when the CFI information is emitted during the frame lowering,
due to the involvment of understanding the control flow.
This patch moves the return address ABI registers s[30:31] into callee saved
registers range and stops adding live-in for return address registers, so that
the CFI machinery will know where the return address resides when CSR
save/restore happen during the frame lowering.
And doing the above poses an issue that now the return instruction uses undefined
register `sgpr30_sgpr31`. This is resolved by hiding the return address register
use by the return instruction through the `SI_RETURN` pseudo instruction, which
doesn't take any input operands, until the `SI_RETURN` pseudo gets lowered to the
`S_SETPC_B64_return` during the `expandPostRAPseudo()`.
As an added benefit, this patch simplifies overall return instruction handling.
Note: The AMDGPU CFI changes are there only in the downstream code and another
version of this patch will be posted for review for the downstream code.
Reviewed By: arsenm, ronlieb
Differential Revision: https://reviews.llvm.org/D114652
Use shufflevector to do the subvector extracts. This allows a lot more
load merging on AMDGPU and also on NVPTX when <2 x half> is involved.
Differential Revision: https://reviews.llvm.org/D117219
Currently the return address ABI registers s[30:31], which fall in the call
clobbered register range, are added as a live-in on the function entry to
preserve its value when we have calls so that it gets saved and restored
around the calls.
But the DWARF unwind information (CFI) needs to track where the return address
resides in a frame and the above approach makes it difficult to track the
return address when the CFI information is emitted during the frame lowering,
due to the involvment of understanding the control flow.
This patch moves the return address ABI registers s[30:31] into callee saved
registers range and stops adding live-in for return address registers, so that
the CFI machinery will know where the return address resides when CSR
save/restore happen during the frame lowering.
And doing the above poses an issue that now the return instruction uses undefined
register `sgpr30_sgpr31`. This is resolved by hiding the return address register
use by the return instruction through the `SI_RETURN` pseudo instruction, which
doesn't take any input operands, until the `SI_RETURN` pseudo gets lowered to the
`S_SETPC_B64_return` during the `expandPostRAPseudo()`.
As an added benefit, this patch simplifies overall return instruction handling.
Note: The AMDGPU CFI changes are there only in the downstream code and another
version of this patch will be posted for review for the downstream code.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D114652
Using a BufferSize of one for memory ProcResources will result in better
ILP since it more accurately models the dependencies between memory ops
and their consumers on an in-order processor. After this change, the
scheduler will treat the data edges from loads as blocking so that
stalls are guaranteed when waiting for data to be retreaved from memory.
Since we don't actually track waitcnt here, this should do a better job
at modeling their behavior.
Practically, this means that the scheduler will trigger the 'STALL'
heuristic more often.
This type of change needs to be evaluated experimentally. Preliminary
results are positive.
Fixes: SWDEV-282962
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D114777
Use GCNHazardRecognizer in postra sched.
Updated tests for the new schedules.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D109536
Change-Id: Ia86ba2ae168f12fb34b4d8efdab491f84d936cde
the compilation time and there is no case for which we see any improvement in
performance. This patch removes this pass and its associated test cases from
the tree.
Differential Revision: https://reviews.llvm.org/D101313
Change-Id: I0599169a7609c19a887f8d847a71e664030cc141
Support for XNACK and SRAMECC is not static on some GPUs. We must be able
to differentiate between different scenarios for these dynamic subtarget
features.
The possible settings are:
- Unsupported: The GPU has no support for XNACK/SRAMECC.
- Any: Preference is unspecified. Use conservative settings that can run anywhere.
- Off: Request support for XNACK/SRAMECC Off
- On: Request support for XNACK/SRAMECC On
GCNSubtarget will track the four options based on the following criteria. If
the subtarget does not support XNACK/SRAMECC we say the setting is
"Unsupported". If no subtarget features for XNACK/SRAMECC are requested we
must support "Any" mode. If the subtarget features XNACK/SRAMECC exist in the
feature string when initializing the subtarget, the settings are "On/Off".
The defaults are updated to be conservatively correct, meaning if no setting
for XNACK or SRAMECC is explicitly requested, defaults will be used which
generate code that can be run anywhere. This corresponds to the "Any" setting.
Differential Revision: https://reviews.llvm.org/D85882
It should be enabled only when the load alignment is at least 8-byte.
Fixes: SWDEV-256824
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D90404
Clustering loads has caching benefits, but as far as I know there is no
advantage to clustering stores on any AMDGPU subtargets.
The disadvantage is that it tends to increase register pressure and
restricts scheduling freedom.
Differential Revision: https://reviews.llvm.org/D85530
In SelectionDAGBuilder always translate the fshl and fshr intrinsics to
FSHL and FSHR (or ROTL and ROTR) instead of lowering them to shifts and
ORs. Improve the legalization of FSHL and FSHR to avoid code quality
regressions.
Differential Revision: https://reviews.llvm.org/D77152
Fix 64-bit copy to SCC by restricting the pattern resulting
in such a copy to subtargets supporting 64-bit scalar compare,
and mapping the copy to S_CMP_LG_U64.
Before introducing the S_CSELECT pattern with explicit SCC
(0045786f146e78afee49eee053dc29ebc842fee1), there was no need
for handling 64-bit copy to SCC ($scc = COPY sreg_64).
The proposed handling to read only the low bits was however
based on a false premise that it is only one bit that matters,
while in fact the copy source might be a vector of booleans and
all bits need to be considered.
The practical problem of mapping the 64-bit copy to SCC is that
the natural instruction to use (S_CMP_LG_U64) is not available
on old hardware. Fix it by restricting the problematic pattern
to subtargets supporting the instruction (hasScalarCompareEq64).
Differential Revision: https://reviews.llvm.org/D85207
If it is load cluster, we don't need to create the dependency edges(SUb->reg) from SUb to SUa
as they both depend on the base register "reg"
+-------+
+----> reg |
| +---+---+
| ^
| |
| |
| |
| +---+---+
| | SUa | Load 0(reg)
| +---+---+
| ^
| |
| |
| +---+---+
+----+ SUb | Load 4(reg)
+-------+
But if it is store cluster, we need to create it as follow shows to avoid the instruction store
depend on scheduled in-between SUb and SUa.
+-------+
+----> reg |
| +---+---+
| ^
| | Missing +-------+
| | +-------------------->+ y |
| | | +---+---+
| +---+-+-+ ^
| | SUa | Store x 0(reg) |
| +---+---+ |
| ^ |
| | +------------------------+
| | |
| +---+--++
+----+ SUb | Store y 4(reg)
+-------+
Reviewed By: evandro, arsenm, rampitec, foad, fhahn
Differential Revision: https://reviews.llvm.org/D72031
Get rid of all fixmes and base heuristic on `num-clustered-dwords`. The main intuition behind this is as
follows. The existing heuristic roughly summarizes as below:
* Assume, all the mem ops instructions participating in the clustering process, loads/stores same num bytes
* If num bytes loaded by each mem op is 4 bytes, then cluster at max 5 mem ops, that is at max 20 bytes
* If num bytes loaded by each mem op is 8 bytes, then cluster at max 3 mem ops, that is at max 24 bytes
* If num bytes loaded by each mem op is 16 bytes, then cluster at max 2 mem ops, that is at max 32 bytes
So, we need to make sure that the new heuristic do not completey deviate away from the above one, and it
properly handles both the sub-word loads and the wide loads.
Reviewed By: arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D84354
Summary:
Add patterns to select s_cselect in the isel.
Handle more cases of implicit SCC accesses in si-fix-sgpr-copies
to allow new patterns to work.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, asbirlea, kerbowa, llvm-commits
Tags: #llvm
Re-commit D81925 with a bugfix D82370.
Differential Revision: https://reviews.llvm.org/D81925
Differential Revision: https://reviews.llvm.org/D82370
Summary:
Add patterns to select s_cselect in the isel.
Handle more cases of implicit SCC accesses in si-fix-sgpr-copies
to allow new patterns to work.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, asbirlea, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81925
If the SimplifyMultipleUseDemandedBits calls BITCASTs that peek through back to the original type then we can remove the BITCASTs entirely.
Differential Revision: https://reviews.llvm.org/D79572
