SMUL_LOHI and UMUL_LOHI are different operations because the high part
of the result is different, so it is not OK to optimize the signed
version to MUL_U24/MULHI_U24 or the unsigned version to
MUL_I24/MULHI_I24.
This reverts commit adaff46d087799072438dd744b038e6fd50a2d78.
Drop the -O3 checks from default-attributes.hip. I don't know why they
are different on some bots but reverting this is far too disruptive.
Removing it from the codegen pipeline induces a lot of test churn
because llc is no longer optimizing out implicit arguments to kernels.
Mostly mechanical, but there are some creative test updates. I preferred
to take the changes as-is in tests where the ABI isn't relevant. In
cases where it's more relevant, or the optimize out logic was too
ingrained in the test, I pre-run the optimization. Some cases manually
add attributes to disable inputs.
Similar to 806761a7629df268c8aed49657aeccffa6bca449.
For IR files without a target triple, -mtriple= specifies the full
target triple while -march= merely sets the architecture part of the
default target triple, leaving a target triple which may not make sense,
e.g. amdgpu-apple-darwin.
Therefore, -march= is error-prone and not recommended for tests without
a target triple. The issue has been benign as we recognize
$unknown-apple-darwin as ELF instead of rejecting it outrightly.
This patch changes AMDGPU tests to not rely on the default
OS/environment components. Tests that need fixes are not changed:
```
LLVM :: CodeGen/AMDGPU/fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fabs.ll
LLVM :: CodeGen/AMDGPU/floor.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.ll
LLVM :: CodeGen/AMDGPU/r600-infinite-loop-bug-while-reorganizing-vector.ll
LLVM :: CodeGen/AMDGPU/schedule-if-2.ll
```
Instead, create a mul24 with a 64 bit result and let ISel take care of
it.
This allows patterns to simply match mul24 even for 64-bit muls instead of having to match both mul/mulhi and a buildvector/bitconvert/etc.
This pass seems to have very little effect because all it does is hoist
some instructions, but it is followed later in the codegen pipeline by
the IR CodeSinking pass which does the opposite.
Differential Revision: https://reviews.llvm.org/D130258
trunc (sign_ext_inreg X, iM) to iN --> sign_ext_inreg (trunc X to iN), iM
There are improvements on existing tests from this, and there are a pair
of large regressions in D127115 for Thumb2 caused by not folding this
pattern.
Differential Revision: https://reviews.llvm.org/D129890
Use shufflevector to do the subvector extracts. This allows a lot more
load merging on AMDGPU and also on NVPTX when <2 x half> is involved.
Differential Revision: https://reviews.llvm.org/D117219
Using a BufferSize of one for memory ProcResources will result in better
ILP since it more accurately models the dependencies between memory ops
and their consumers on an in-order processor. After this change, the
scheduler will treat the data edges from loads as blocking so that
stalls are guaranteed when waiting for data to be retreaved from memory.
Since we don't actually track waitcnt here, this should do a better job
at modeling their behavior.
Practically, this means that the scheduler will trigger the 'STALL'
heuristic more often.
This type of change needs to be evaluated experimentally. Preliminary
results are positive.
Fixes: SWDEV-282962
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D114777
Select SelectionDAG ops smul_lohi/umul_lohi to
v_mad_i64_i32/v_mad_u64_u32 respectively, with an addend of 0.
v_mul_lo, v_mul_hi and v_mad_i64/u64 are all quarter-rate instructions
so it is better to use one instruction than two.
Further improvements are possible to make better use of the addend
operand, but this is already a strict improvement over what we have
now.
Differential Revision: https://reviews.llvm.org/D113986
The compiler was generating symbols in the final code object for local
branch target labels. This bloats the code object, slows down the loader,
and is only used to simplify disassembly.
Use '--symbolize-operands' with llvm-objdump to improve readability of the
branch target operands in disassembly.
Fixes: SWDEV-312223
Reviewed By: scott.linder
Differential Revision: https://reviews.llvm.org/D114273
Added support to check if architecture supports s_mulhi which is used as part of
the decision whether or not to use valu 24 bit mul (if the mulhi gets
transformed to a valu op anyway, then may as well use it).
This is an extension of the work in D97063
Differential Revision: https://reviews.llvm.org/D103321
Change-Id: I80b1323de640a52623d69ac005a97d06a5d42a14
Prefer to keep uniform (non-divergent) multiplies on the scalar ALU when
possible. This significantly improves some game cases by eliminating
v_readfirstlane instructions when the result feeds into a scalar
operation, like the address calculation for a scalar load or store.
Since isDivergent is only an approximation of whether a value is in
SGPRs, it can potentially regress some situations where a uniform value
ends up in a VGPR. These should be rare in real code, although the test
changes do contain a number of examples.
Most of the test changes are just using s_mul instead of v_mul/mad which
is generally better for both register pressure and latency (at least on
GFX10 where sgpr pressure doesn't affect occupancy and vector ALU
instructions have significantly longer latency than scalar ALU). Some
R600 tests now use MULLO_INT instead of MUL_UINT24.
GlobalISel appears to handle more scenarios in the desirable way,
although it can also be thrown off and fails to select the 24-bit
multiplies in some cases.
Alternative solution considered and rejected was to allow selecting
MUL_[UI]24 to S_MUL_I32. I've rejected this because the definition of
those SD operations works is don't-care on the most significant 8 bits,
and this fact is used in some combines via SimplifyDemandedBits.
Based on a patch by Nicolai Hähnle.
Differential Revision: https://reviews.llvm.org/D97063
This replaces most argument uses with loads, but for
now not all.
The code in SelectionDAG for calling convention lowering
is actively harmful for amdgpu_kernel. It attempts to
split the argument types into register legal types, which
results in low quality code for arbitary types. Since
all kernel arguments are passed in memory, we just want the
raw types.
I've tried a couple of methods of mitigating this in SelectionDAG,
but it's easier to just bypass this problem alltogether. It's
possible to hack around the problem in the initial lowering,
but the real problem is the DAG then expects to be able to use
CopyToReg/CopyFromReg for uses of the arguments outside the block.
Exposing the argument loads in the IR also has the advantage
that the LoadStoreVectorizer can merge them.
I'm not sure the best approach to dealing with the IR
argument list is. The patch as-is just leaves the IR arguments
in place, so all the existing code will still compute the same
kernarg size and pointlessly lowers the arguments.
Arguably the frontend should emit kernels with an empty argument
list in the first place. Alternatively a dummy array could be
inserted as a single argument just to reserve space.
This does have some disadvantages. Local pointer kernel arguments can
no longer have AssertZext placed on them as the equivalent !range
metadata is not valid on pointer typed loads. This is mostly bad
for SI which needs to know about the known bits in order to use the
DS instruction offset, so in this case this is not done.
More importantly, this skips noalias arguments since this pass
does not yet convert this to the equivalent !alias.scope and !noalias
metadata. Producing this metadata correctly seems to be tricky,
although this logically is the same as inlining into a function which
doesn't exist. Additionally, exposing these loads to the vectorizer
may result in degraded aliasing information if a pointer load is
merged with another argument load.
I'm also not entirely sure this is preserving the current clover
ABI, although I would greatly prefer if it would stop widening
arguments and match the HSA ABI. As-is I think it is extending
< 4-byte arguments to 4-bytes but doesn't align them to 4-bytes.
llvm-svn: 335650
Currently the default C calling convention functions are treated
the same as compute kernels. Make this explicit so the default
calling convention can be changed to a non-kernel.
Converted with perl -pi -e 's/define void/define amdgpu_kernel void/'
on the relevant test directories (and undoing in one place that actually
wanted a non-kernel).
llvm-svn: 298444
This switches to the workaround that HSA defaults to
for the mesa path.
This should be applied to the 4.0 branch.
Patch by Vedran Miletić <vedran@miletic.net>
llvm-svn: 292982
Summary:
We are using this helper for our 24-bit arithmetic combines, so we are now able to eliminate multi-use operations that mask the high-bits of 24-bit inputs (e.g. and x, 0xffffff)
Reviewers: arsenm, nhaehnle
Subscribers: tony-tye, arsenm, kzhuravl, wdng, nhaehnle, llvm-commits, yaxunl
Differential Revision: https://reviews.llvm.org/D24672
llvm-svn: 284267
