This patch is part of a set of patches that add an `-fextend-lifetimes`
flag to clang, which extends the lifetimes of local variables and
parameters for improved debuggability. In addition to that flag, the
patch series adds a pragma to selectively disable `-fextend-lifetimes`,
and an `-fextend-this-ptr` flag which functions as `-fextend-lifetimes`
for this pointers only. All changes and tests in these patches were
written by Wolfgang Pieb (@wolfy1961), while Stephen Tozer (@SLTozer)
has handled review and merging. The extend lifetimes flag is intended to
eventually be set on by `-Og`, as discussed in the RFC
here:
https://discourse.llvm.org/t/rfc-redefine-og-o1-and-add-a-new-level-of-og/72850
This patch implements a new intrinsic instruction in LLVM,
`llvm.fake.use` in IR and `FAKE_USE` in MIR, that takes a single operand
and has no effect other than "using" its operand, to ensure that its
operand remains live until after the fake use. This patch does not emit
fake uses anywhere; the next patch in this sequence causes them to be
emitted from the clang frontend, such that for each variable (or this) a
fake.use operand is inserted at the end of that variable's scope, using
that variable's value. This patch covers everything post-frontend, which
is largely just the basic plumbing for a new intrinsic/instruction,
along with a few steps to preserve the fake uses through optimizations
(such as moving them ahead of a tail call or translating them through
SROA).
Co-authored-by: Stephen Tozer <stephen.tozer@sony.com>
On Apple platforms, we generate .apple_names, .apple_types,
.apple_namespaces and .apple_objc Apple accelerator tables for DWARF 4
and earlier. For DWARF 5 we should generate .debug_names, but instead we
get no accelerator tables at all.
In the backend we are correctly determining that we should be emitting
.debug_names instead of .apple_names. However, when we get to the point
of emitting the section, if the CU debug name table kind is not
"default", the accelerator table emission is skipped.
This patch sets the DebugNameTableKind to Apple in the frontend when
target an Apple target. That way we know that the CU was compiled with
the intent of emitting accelerator tables. For DWARF 4 and earlier, that
means Apple accelerator tables. For DWARF 5 and later, that means .debug
names.
Differential revision: https://reviews.llvm.org/D118754
On Apple platforms, we generate .apple_names, .apple_types,
.apple_namespaces and .apple_objc Apple accelerator tables for DWARF 4
and earlier. For DWARF 5 we should generate .debug_names, but instead we
get no accelerator tables at all.
In the backend we are correctly determining that we should be emitting
.debug_names instead of .apple_names. However, when we get to the point
of emitting the section, if the CU debug name table kind is not
"default", the accelerator table emission is skipped.
This patch sets the DebugNameTableKind to Apple in the frontend when
target an Apple target. That way we know that the CU was compiled with
the intent of emitting accelerator tables. For DWARF 4 and earlier, that
means Apple accelerator tables. For DWARF 5 and later, that means .debug
names.
Differential revision: https://reviews.llvm.org/D118754
GDB 11.2 generates V8 version of gdb-index where it de-duplicates entries in
constant pool based on cu indices. Changed how constant pool entries are counted
to account for this.
Differential Revision: https://reviews.llvm.org/D146852
**Summary**
After this patch, `DW_TAG_imported_declaration`s will be emitted into
the DWARF accelerator tables (under `.apple_namespaces`)
**Motivation**
Currently LLDB expression evaluation doesn't see through namespace
aliases. This is because LLDB only considers namespaces that are
part of `.apple_namespaces` when building a nested namespace
identifier for C++, which currently doesn't include import
declarations. The alternative to putting imports into accelerator
tables is to do a linear scan of a `DW_TAG_namespace` and look
for import declarations that look like they would satisfy the lookup
request, which is prohibitively expensive.
**Testing**
* Added unit-test
Differential Revision: https://reviews.llvm.org/D143397
This patch removes the verbose option from tests that do not need it and simplifies the checks. For tests that do have the verbose option, the checks were standardized to be more readable and consistent.
Reviewed By: shchenz, dblaikie
Differential Revision: https://reviews.llvm.org/D112636
Since d6de1e1a71406c75a4ea4d5a2fe84289f07ea3a1, no attributes is quivalent to
setting attribute to false.
This is a preliminary commit for https://reviews.llvm.org/D99080
Current LLVM implementation uses `MCAsmInfo::CodePointerSize` as addr_size when emitting the DWARF data. llvm-dwarfdump, on the other hand, handles `addr_size`s of 4 and 8 properly and considers all other sizes as an error. This works for most of mainline targets except for MSP430 and AVR.
msp430-gcc v8.3.1 emits DWARF32 with addr_size = 4 (DWARF32 does not imply addr_size = 4, 32 refers to internal offset width of 4 bytes) that is handled by llvm-dwarfdump already. Still, emitting 2-byte target pointers on MSP430 seems correct as well (but not for MSP430X that is supported by msp430-gcc but not by LLVM and has 20-bit address space).
This patch make it possible for MSP430 debug info support to be tested with llvm-dwarfdump.
Differential Revision: https://reviews.llvm.org/D82055
64-bit DWARF is supported for most of the sections now, and there are
separate tests for each of them. This test uses a binary input, while
the preferable way is to have a text-based source. Thus, it looks like
this test may be safely removed.
Differential Revision: https://reviews.llvm.org/D80122
Summary: The lit feature object-emission was added because Hexagon did not support the integrated assembler, so some tests needed to be turned off with a Hexagon target. Hexagon now supports the integrated assembler, so this feature can be removed.
Reviewers: bcain, kparzysz, jverma, whitequark, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: mehdi_amini, hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73568
The DebugInfo/dwarfdump-invalid-line-table test used a pre-canned binary
generated by a fuzzer to demonstrate a bug fix. Unfortunately, the
binary is rigid and requires hand-editing if we change behaviour, such
as rejecting certain properties within it (as I plan on doing in another
change).
Rather than hand-edit the binary, I have replaced it with two tests. The
first tests the high-level code path from the debug line parser that
produces the same error as this test previously did, and the second is a
set of unit test cases that comprehensively cover the
FormValue::skipValue method, which in turn covers the area that the
original bug fix touched.
Reviewed by: MaskRay, dblaikie
Differential Revision: https://reviews.llvm.org/D74202
Significant missing hashing - as per the comment this was only meant to
skip member functions (unspecified, but I think it's legible as member
function declarations, not definitions) but was skipping all named
subprograms (so only hashed child DIEs for member function definitions -
because they didn't have a direct name, but only a name given indirectly
in the DW_AT_specification-referenced DIE)
Build ID is a protocol for looking up debug files that's already
supported by various tools including debuggers. For example, when
locating debug files, gdb would check the following directories:
- /usr/lib/debug/.build-id/ab/cdef1234.debug
- /usr/bin/ls.debug
- /usr/bin/.debug/ls.debug
- /usr/lib/debug/usr/bin/ls.debug
llvm-symbolizer currently consults all of these except for build ID
based one. This patch implements support for build ID lookup. The
set of debug directories to search is specified by the new option:
--debug-file-directory, whose name matches the debug-file-directory
variable used by gdb for the same purpose.
Differential Revision: https://reviews.llvm.org/D70759
This patch adds support for debug_macinfo.dwo section[pre-standardized]
to llvm and llvm-dwarfdump.
Reviewers: probinson, dblaikie, aprantl, jini.susan.george, alok
Differential Revision: https://reviews.llvm.org/D70705
Tags: #debug-info #llvm
The column field is missing for all inline sites, currently it's always
zero. This changes populates DW_AT_call_column field for inline sites.
Test case modified to cover this change.
Patch by: Wenlei He
Differential revision: https://reviews.llvm.org/D64033
llvm-svn: 365945
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
This patch adds half a dozen new tests that test various edge cases in
the behaviour of the symbolizer and DWARF data parsing. All of them test
the current behaviour.
Reviewed by: JDevlieghere, aprantl
Differential Revision: https://reviews.llvm.org/D57741
llvm-svn: 353286
This is the fourth (and final for now) of a series of patches
simplifying llvm-symbolizer tests. See r352752, r352753 and 352754 for
the previous ones. This patch splits out several more distinct test
cases from llvm-symbolizer.test into separate tests, and simplifies them
in various ways including:
1) Building a test case for spaces in path from source, rather than
using a pre-canned binary. This allows deleting of said binary and the
source it was built from.
2) Switching to specifying addresses and objects directly on the
command-line rather than via stdin.
This also adds an explict test for the ability to specify a file and
address as a line in stdin, since the majority of the tests have been
migrated away from this approach, leaving this largely untested.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57446
llvm-svn: 352756
This is the third of a series of patches simplifying llvm-symbolizer
tests. See r352752 and r352753 for the previous two. This patch splits
out a number of distinct test cases from llvm-symbolizer.test into
separate tests, and simplifies them in various ways including:
1) using --obj/positional arguments for the input file and addresses
instead of stdin,
2) using runtime-generated inputs rather than a pre-canned binary, and
3) testing more specifically (i.e. checking only what is interesting to
the behaviour changed in the original commit for that test case).
This patch also removes the test case for using --obj. The
tools/llvm-symbolizer/basic.s test already tests this case. Finally,
this patch adds a simple test case to the demangle switch test case to
show that demangling happens by default.
See https://bugs.llvm.org/show_bug.cgi?id=40070#c1 for the motivation.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57446
llvm-svn: 352754
Pulling out the split-dwarf tests by way of example of how I think
llvm-symbolizer should be tested going forward. Open to
debate/discussion, though.
llvm-svn: 352004
compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
llvm-svn: 351200
Originally committed in r349333, reverted in r349353.
GCC emitted these unconditionally on/before 4.4/March 2012
Clang emitted these unconditionally on/before 3.5/March 2014
This improves performance when parsing CUs (especially those using split
DWARF) that contain no code ranges (such as the mini CUs that may be
created by ThinLTO importing - though generally they should be/are
avoided, especially for Split DWARF because it produces a lot of very
small CUs, which don't scale well in a bunch of other ways too
(including size)).
The revert was due to a (Google internal) test that had some checked in old
object files missing DW_AT_ranges. That's since been fixed.
llvm-svn: 349968
GCC emitted these unconditionally on/before 4.4/March 2012
Clang emitted these unconditionally on/before 3.5/March 2014
This improves performance when parsing CUs (especially those using split
DWARF) that contain no code ranges (such as the mini CUs that may be
created by ThinLTO importing - though generally they should be/are
avoided, especially for Split DWARF because it produces a lot of very
small CUs, which don't scale well in a bunch of other ways too
(including size)).
llvm-svn: 349333
Considers the index when extracting location lists from a .dwp file.
Majority of the patch by David Blaikie.
Reviewers: dblaikie
Differential revision: https://reviews.llvm.org/D53155
llvm-svn: 344807
Eliminating some duplication of rangelist dumping code at the expense of
some version-dependent code in dump and extract routines.
Reviewer: dblaikie, JDevlieghere, vleschuk
Differential revision: https://reviews.llvm.org/D51081
llvm-svn: 342048
With the merge of TUs and CUs into a single container, some code that
relied on the CU range having an ordered range of contiguous addresses
(for locating a CU at a given offset) broke. But the units from
debug_info (currently only CUs, but CUs and TUs in DWARFv5) are in a
contiguous sub-range of that container - searching only through that
subrange is still valid & so do that.
llvm-svn: 341889
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
LLVM always puts function definition DIEs at the top level, but under
some circumstances GCC does not (at least in this case with member
functions of a function-local type).
To ensure that doesn't appear as though the local type's member function
is unduly inlined within the outer function - ensure the inline
discovery DIE parent walk stops at the first DW_TAG_subprogram.
llvm-svn: 331291
This fixes a bug where the verifier was complaining about empty
accelerator tables. When the table is empty, its size is not a valid
offset as it points after the end of the section.
This patch also makes the extractor return llvm:Error instead of bool
for better error reporting in the verifier.
Differential revision: https://reviews.llvm.org/D41063
rdar://35932007
llvm-svn: 320399
